[PATCH 1/6] rockchip: dts: rk3328-evb: Move vcc5v0-host-xhci-drv to -u-boot.dtsi

[Kever Yang]

Hi ChenYu,

On 2020/3/27 下午12:41, Chen-Yu Tsai wrote:
> From: Chen-Yu Tsai <wens at csie.org>
>
> USB 3.0 is only supported in U-boot, not in the Linux kernel where the
> device tree files are ultimately synced from. While the xhci node was
> moved, the external vbus regulator was not.
>
> Move it as well.
>
> Fixes: 2e91e2025c1b ("rockchip: rk3328: migrate u-boot node to -u-boot.dtsi")
> Signed-off-by: Chen-Yu Tsai <wens at csie.org>


Reviewed-by: Kever Yang <kever.yang at rock-chips.com>

Thanks,
- Kever
> ---
>   arch/arm/dts/rk3328-evb-u-boot.dtsi | 11 +++++++++++
>   arch/arm/dts/rk3328-evb.dts         |  9 ---------
>   2 files changed, 11 insertions(+), 9 deletions(-)
>
> diff --git a/arch/arm/dts/rk3328-evb-u-boot.dtsi b/arch/arm/dts/rk3328-evb-u-boot.dtsi
> index 4a827063c555..5679897279aa 100644
> --- a/arch/arm/dts/rk3328-evb-u-boot.dtsi
> +++ b/arch/arm/dts/rk3328-evb-u-boot.dtsi
> @@ -6,6 +6,17 @@
>   #include "rk3328-u-boot.dtsi"
>   #include "rk3328-sdram-ddr3-666.dtsi"
>   
> +/{
> +	vcc5v0_host_xhci: vcc5v0-host-xhci-drv {
> +		compatible = "regulator-fixed";
> +		enable-active-high;
> +		gpio = <&gpio0 0 GPIO_ACTIVE_HIGH>;
> +		regulator-name = "vcc5v0_host_xhci";
> +		regulator-min-microvolt = <5000000>;
> +		regulator-max-microvolt = <5000000>;
> +	};
> +};
> +
>   &usb_host0_xhci {
>   	vbus-supply = <&vcc5v0_host_xhci>;
>   	status = "okay";
> diff --git a/arch/arm/dts/rk3328-evb.dts b/arch/arm/dts/rk3328-evb.dts
> index a2ee838fcd6b..e9bc849f8c23 100644
> --- a/arch/arm/dts/rk3328-evb.dts
> +++ b/arch/arm/dts/rk3328-evb.dts
> @@ -38,15 +38,6 @@
>   		regulator-max-microvolt = <5000000>;
>   	};
>   
> -	vcc5v0_host_xhci: vcc5v0-host-xhci-drv {
> -		compatible = "regulator-fixed";
> -		enable-active-high;
> -		regulator-name = "vcc5v0_host_xhci";
> -		gpio = <&gpio0 0 GPIO_ACTIVE_HIGH>;
> -		regulator-min-microvolt = <5000000>;
> -		regulator-max-microvolt = <5000000>;
> -	};
> -
>   	vcc_phy: vcc-phy-regulator {
>   		compatible = "regulator-fixed";
>   		regulator-name = "vcc_phy";