[PATCH 2/4] elgin-rv1108: Use rk_board_late_init() for GPIO settings

[Otavio Salvador]

Since commit 8e9a8d0d0c8c ("rockchip: elgin-rv1108: use board_early_init_f
for per-boar init") the function that configure the board GPIOs is no
longer called since CONFIG_BOARD_EARLY_INIT_F=y is not selected.

These GPIOs do not need to be configured in such early stagem, so change it
to rk_board_late_init() and also select CONFIG_BOARD_LATE_INIT=y
to fix the regression.

Signed-off-by: Otavio Salvador <otavio at ossystems.com.br>
Signed-off-by: Fabio Berton <fabio.berton at ossystems.com.br>
---

 board/elgin/elgin_rv1108/elgin_rv1108.c | 2 +-
 configs/elgin-rv1108_defconfig          | 1 +
 2 files changed, 2 insertions(+), 1 deletion(-)

diff --git a/board/elgin/elgin_rv1108/elgin_rv1108.c b/board/elgin/elgin_rv1108/elgin_rv1108.c
index 607667ac63..dddd950ab2 100644
--- a/board/elgin/elgin_rv1108/elgin_rv1108.c
+++ b/board/elgin/elgin_rv1108/elgin_rv1108.c
@@ -50,7 +50,7 @@ int mach_cpu_init(void)
 
 #define MODEM_ENABLE_GPIO 111
 
-int board_early_init_f(void)
+int rk_board_late_init(void)
 {
 	gpio_request(MODEM_ENABLE_GPIO, "modem_enable");
 	gpio_direction_output(MODEM_ENABLE_GPIO, 0);
diff --git a/configs/elgin-rv1108_defconfig b/configs/elgin-rv1108_defconfig
index 62af7634a3..80d53f3c10 100644
--- a/configs/elgin-rv1108_defconfig
+++ b/configs/elgin-rv1108_defconfig
@@ -10,6 +10,7 @@ CONFIG_DEBUG_UART_CLOCK=24000000
 CONFIG_DEBUG_UART=y
 # CONFIG_USE_BOOTCOMMAND is not set
 CONFIG_DEFAULT_FDT_FILE="rv1108-elgin-r1.dtb"
+CONFIG_BOARD_LATE_INIT=y
 # CONFIG_DISPLAY_CPUINFO is not set
 CONFIG_DISPLAY_BOARDINFO_LATE=y
 CONFIG_CMD_GPIO=y
-- 
2.25.1