[PATCH 08/11] configs: stm32mp1: remove optee defconfig
Patrick Delaunay
patrick.delaunay at st.com
Wed Mar 18 09:22:51 CET 2020
As the op-tee presence is detected by U-boot, the stm32mp15_optee_defconfig
is identical to stm32mp15_trusted_defconfig and can be removed.
Signed-off-by: Patrick Delaunay <patrick.delaunay at st.com>
---
board/st/stm32mp1/MAINTAINERS | 1 -
configs/stm32mp15_optee_defconfig | 134 ------------------------------
doc/board/st/stm32mp1.rst | 32 ++-----
3 files changed, 7 insertions(+), 160 deletions(-)
delete mode 100644 configs/stm32mp15_optee_defconfig
diff --git a/board/st/stm32mp1/MAINTAINERS b/board/st/stm32mp1/MAINTAINERS
index 2930947716..96c4559033 100644
--- a/board/st/stm32mp1/MAINTAINERS
+++ b/board/st/stm32mp1/MAINTAINERS
@@ -6,6 +6,5 @@ S: Maintained
F: arch/arm/dts/stm32mp15*
F: board/st/stm32mp1/
F: configs/stm32mp15_basic_defconfig
-F: configs/stm32mp15_optee_defconfig
F: configs/stm32mp15_trusted_defconfig
F: include/configs/stm32mp1.h
diff --git a/configs/stm32mp15_optee_defconfig b/configs/stm32mp15_optee_defconfig
deleted file mode 100644
index f0d524d344..0000000000
--- a/configs/stm32mp15_optee_defconfig
+++ /dev/null
@@ -1,134 +0,0 @@
-CONFIG_ARM=y
-CONFIG_ARCH_STM32MP=y
-CONFIG_SYS_MALLOC_F_LEN=0x3000
-CONFIG_ENV_SECT_SIZE=0x40000
-CONFIG_ENV_OFFSET=0x280000
-CONFIG_TARGET_ST_STM32MP15x=y
-CONFIG_ENV_OFFSET_REDUND=0x2C0000
-CONFIG_DISTRO_DEFAULTS=y
-CONFIG_FIT=y
-CONFIG_BOOTCOMMAND="run bootcmd_stm32mp"
-CONFIG_SYS_PROMPT="STM32MP> "
-# CONFIG_CMD_BOOTD is not set
-# CONFIG_CMD_ELF is not set
-# CONFIG_CMD_IMI is not set
-# CONFIG_CMD_XIMG is not set
-# CONFIG_CMD_EXPORTENV is not set
-# CONFIG_CMD_IMPORTENV is not set
-CONFIG_CMD_MEMINFO=y
-CONFIG_CMD_MEMTEST=y
-CONFIG_CMD_ADC=y
-CONFIG_CMD_CLK=y
-CONFIG_CMD_DFU=y
-CONFIG_CMD_FUSE=y
-CONFIG_CMD_GPIO=y
-CONFIG_CMD_GPT=y
-CONFIG_CMD_I2C=y
-CONFIG_CMD_MMC=y
-CONFIG_CMD_MTD=y
-CONFIG_CMD_REMOTEPROC=y
-CONFIG_CMD_SPI=y
-CONFIG_CMD_USB=y
-CONFIG_CMD_USB_MASS_STORAGE=y
-CONFIG_CMD_BMP=y
-CONFIG_CMD_CACHE=y
-CONFIG_CMD_TIME=y
-CONFIG_CMD_TIMER=y
-CONFIG_CMD_PMIC=y
-CONFIG_CMD_REGULATOR=y
-CONFIG_CMD_EXT4_WRITE=y
-CONFIG_CMD_MTDPARTS=y
-CONFIG_CMD_UBI=y
-CONFIG_DEFAULT_DEVICE_TREE="stm32mp157c-ev1"
-CONFIG_ENV_IS_NOWHERE=y
-CONFIG_ENV_IS_IN_EXT4=y
-CONFIG_ENV_IS_IN_SPI_FLASH=y
-CONFIG_ENV_IS_IN_UBI=y
-CONFIG_SYS_REDUNDAND_ENVIRONMENT=y
-CONFIG_ENV_EXT4_INTERFACE="mmc"
-CONFIG_ENV_EXT4_DEVICE_AND_PART="0:auto"
-CONFIG_ENV_EXT4_FILE="/uboot.env"
-CONFIG_ENV_UBI_PART="UBI"
-CONFIG_ENV_UBI_VOLUME="uboot_config"
-CONFIG_ENV_UBI_VOLUME_REDUND="uboot_config_r"
-CONFIG_SYS_RELOC_GD_ENV_ADDR=y
-CONFIG_STM32_ADC=y
-CONFIG_DFU_MMC=y
-CONFIG_DFU_RAM=y
-CONFIG_DFU_MTD=y
-CONFIG_DFU_VIRT=y
-CONFIG_SET_DFU_ALT_INFO=y
-CONFIG_USB_FUNCTION_FASTBOOT=y
-CONFIG_FASTBOOT_BUF_ADDR=0xC0000000
-CONFIG_FASTBOOT_BUF_SIZE=0x02000000
-CONFIG_FASTBOOT_USB_DEV=1
-CONFIG_FASTBOOT_FLASH=y
-CONFIG_FASTBOOT_FLASH_MMC_DEV=1
-CONFIG_DM_HWSPINLOCK=y
-CONFIG_HWSPINLOCK_STM32=y
-CONFIG_DM_I2C=y
-CONFIG_SYS_I2C_STM32F7=y
-CONFIG_LED=y
-CONFIG_LED_GPIO=y
-CONFIG_DM_MAILBOX=y
-CONFIG_STM32_IPCC=y
-CONFIG_DM_MMC=y
-CONFIG_SUPPORT_EMMC_BOOT=y
-CONFIG_STM32_SDMMC2=y
-CONFIG_MTD=y
-CONFIG_DM_MTD=y
-CONFIG_SYS_MTDPARTS_RUNTIME=y
-CONFIG_MTD_RAW_NAND=y
-CONFIG_NAND_STM32_FMC2=y
-CONFIG_MTD_SPI_NAND=y
-CONFIG_DM_SPI_FLASH=y
-CONFIG_SPI_FLASH_MACRONIX=y
-CONFIG_SPI_FLASH_SPANSION=y
-CONFIG_SPI_FLASH_STMICRO=y
-CONFIG_SPI_FLASH_WINBOND=y
-# CONFIG_SPI_FLASH_USE_4K_SECTORS is not set
-CONFIG_SPI_FLASH_MTD=y
-CONFIG_DM_ETH=y
-CONFIG_DWC_ETH_QOS=y
-CONFIG_PHY=y
-CONFIG_PHY_STM32_USBPHYC=y
-CONFIG_PINCONF=y
-CONFIG_PINCTRL_STMFX=y
-CONFIG_DM_PMIC=y
-CONFIG_PMIC_STPMIC1=y
-CONFIG_DM_REGULATOR_FIXED=y
-CONFIG_DM_REGULATOR_GPIO=y
-CONFIG_DM_REGULATOR_STM32_VREFBUF=y
-CONFIG_DM_REGULATOR_STPMIC1=y
-CONFIG_REMOTEPROC_STM32_COPRO=y
-CONFIG_DM_RNG=y
-CONFIG_RNG_STM32MP1=y
-CONFIG_DM_RTC=y
-CONFIG_RTC_STM32=y
-CONFIG_SERIAL_RX_BUFFER=y
-CONFIG_SPI=y
-CONFIG_DM_SPI=y
-CONFIG_STM32_QSPI=y
-CONFIG_STM32_SPI=y
-CONFIG_TEE=y
-CONFIG_OPTEE=y
-# CONFIG_OPTEE_TA_AVB is not set
-CONFIG_USB=y
-CONFIG_DM_USB=y
-CONFIG_DM_USB_GADGET=y
-CONFIG_USB_EHCI_HCD=y
-CONFIG_USB_EHCI_GENERIC=y
-CONFIG_USB_GADGET=y
-CONFIG_USB_GADGET_MANUFACTURER="STMicroelectronics"
-CONFIG_USB_GADGET_VENDOR_NUM=0x0483
-CONFIG_USB_GADGET_PRODUCT_NUM=0x5720
-CONFIG_USB_GADGET_DWC2_OTG=y
-CONFIG_DM_VIDEO=y
-CONFIG_BACKLIGHT_GPIO=y
-CONFIG_VIDEO_LCD_ORISETECH_OTM8009A=y
-CONFIG_VIDEO_LCD_RAYDIUM_RM68200=y
-CONFIG_VIDEO_STM32=y
-CONFIG_VIDEO_STM32_DSI=y
-CONFIG_VIDEO_STM32_MAX_XRES=1280
-CONFIG_VIDEO_STM32_MAX_YRES=800
-CONFIG_FDT_FIXUP_PARTITIONS=y
diff --git a/doc/board/st/stm32mp1.rst b/doc/board/st/stm32mp1.rst
index b7a0fbfd03..7fccdfbb94 100644
--- a/doc/board/st/stm32mp1.rst
+++ b/doc/board/st/stm32mp1.rst
@@ -80,32 +80,16 @@ defconfig_file : stm32mp15_trusted_defconfig
+ +-------------------------+------------+-------+
| |Trusted Firmware-A (TF-A)| U-Boot | Linux |
+-------------+-------------------------+------------+-------+
- | TrustZone |TF-A secure monitor |
+ | TrustZone |secure monitor |
+-------------+-------------------------+------------+-------+
TF-A performs a full initialization of Secure peripherals and installs a
-secure monitor (BL32=SPMin).
+secure monitor, BL32:
-U-Boot is running in normal world and uses TF-A monitor to access
-to secure resources.
-
-The **Trusted** boot chain with **OP-TEE**
-``````````````````````````````````````````
-
-defconfig_file : stm32mp15_optee_defconfig
-
- +-------------+-------------------------+------------+-------+
- | ROM code | FSBL | SSBL | OS |
- + +-------------------------+------------+-------+
- | |Trusted Firmware-A (TF-A)| U-Boot | Linux |
- +-------------+-------------------------+------------+-------+
- | TrustZone |OP-TEE |
- +-------------+-------------------------+------------+-------+
-
-TF-A performs a full initialization of Secure peripherals and installs OP-TEE
-from specific partitions (teeh, teed, teex).
+ * SPMin provided by TF-A or
+ * OP-TEE from specific partitions (teeh, teed, teex).
-U-Boot is running in normal world and uses OP-TEE monitor to access
+U-Boot is running in normal world and uses the secure monitor to access
to secure resources.
The **Basic** boot chain
@@ -180,7 +164,6 @@ Build Procedure
for example: use one output directory for each configuration::
# export KBUILD_OUTPUT=stm32mp15_trusted
- # export KBUILD_OUTPUT=stm32mp15_optee
# export KBUILD_OUTPUT=stm32mp15_basic
you can build outside of code directory::
@@ -194,7 +177,6 @@ Build Procedure
with <defconfig_file>:
- For **trusted** boot mode : **stm32mp15_trusted_defconfig**
- - For **trusted** with OP-TEE boot mode : **stm32mp15_optee_defconfig**
- For basic boot mode: stm32mp15_basic_defconfig
5. Configure the device-tree and build the U-Boot image::
@@ -211,8 +193,8 @@ Build Procedure
b) trusted with OP-TEE boot on dk2::
- # export KBUILD_OUTPUT=stm32mp15_optee
- # make stm32mp15_optee_defconfig
+ # export KBUILD_OUTPUT=stm32mp15_trusted
+ # make stm32mp15_trusted_defconfig
# make DEVICE_TREE=stm32mp157c-dk2 all
c) basic boot on ev1::
--
2.17.1
More information about the U-Boot
mailing list