[PATCH v2 00/12] phy: atheros: dt bindings and cleanup

[Michael Walle]

Am 2020-03-10 18:55, schrieb Tom Rini:
> On Tue, Mar 10, 2020 at 12:46:36PM -0500, Joe Hershberger wrote:
>> Hi Michael,
>> 
>> On Tue, Jan 7, 2020 at 5:07 AM Michael Walle <michael at walle.cc> wrote:
>> >
>> > Hi all,
>> >
>> > Am 2019-12-05 23:57, schrieb Michael Walle:
>> > > [RESEND because I've forgot to add the mailinglist. Sorry!]
>> > >
>> > > This patch series superseeds the following two:
>> > > From Vladimir Oltean
>> > >   https://patchwork.ozlabs.org/cover/1031360/
>> > > From me:
>> > >   https://patchwork.ozlabs.org/cover/1184507/
>> > >
>> > > Although the first is marked as accepted into u-boot-net I guess it was
>> > > removed due to broken boards ("DT as ABI", RGMII delay was fixed and
>> > > thus
>> > > breaks the board).
>> > >
>> > > After disussing with Vladimir, I've integrated his patches with this
>> > > series. Also the first one
>> > >   Address packet drops at low traffic rate due to SmartEEE feature
>> > > was dropped because it will likely be fixed by making u-boot support
>> > > the
>> > > eee-broken-X device tree properties. Apart from that, only the subject
>> > > was
>> > > changed and a note about possible board breakage was added the patch
>> > > which
>> > > changes the delay behaviour.
>> > >
>> > > For all of those, who will test this patchset, the device tree binding
>> > > needs the phydev->node property, which needs to be set in every network
>> > > driver. If the device tree binding is not working for you have a look
>> > > at
>> > > the
>> > >   ar803x_of_init: found PHY node: phy at 0
>> > > output. In the case above "phy at 0" is the phy node in the device tree.
>> > > If
>> > > instead the node of your network device is displayed, you have to set
>> > > the phydev->node property in your network device driver.
>> > >
>> > > For the fsl_enetc driver this patchset will add it:
>> > >   https://patchwork.ozlabs.org/cover/1188043/
>> >
>> > ping :)
>> >
>> > would be cool to have that merged in the current window.
>> 
>> I tried to merge in the current window, but it broke some boards.
>> 
>> https://travis-ci.org/jhershbe/u-boot/builds/660395885
>> 
>> Please have a look and send a new version that passes those builds.
> 
> This seems related to the changes that Simon Glass did that Simon
> Goldschmidt is reverting and re-working, so don't go off on rewriting
> this series just yet.

Any news?

-michael