[PATCH V4 00/13] net: smc911x: Convert to DM

[Adam Ford]

On Thu, Mar 26, 2020 at 5:51 AM Marek Vasut <marek.vasut at gmail.com> wrote:
>
> On 3/26/20 11:47 AM, Adam Ford wrote:
> > On Wed, Mar 25, 2020 at 11:47 AM Marek Vasut <marek.vasut at gmail.com> wrote:
> >>
> >> Perform DM conversion of the SMC911x driver.
> >>
> >> Note that the DT compatible is set only for 9115 , so this might need
> >> to be changed.
> >>
> >> Marek Vasut (13):
> >>   net: smc911x: Remove pkt_data_{push,pull}
> >>   net: smc911x: Replace malloc()+memset() with calloc()
> >>   net: smc911x: Rename smc911x_rx() to smc911x_recv()
> >>   net: smc911x: Invert the logic in smc911x_miiphy_{read,write}()
> >>   net: smc911x: Fix potential memleak() in init fail path
> >>   net: smc911x: Pull MII registration into separate function
> >>   net: smc911x: Inline all functions from header file
> >>   net: smc911x: Drop weak alias from 32bit accessors
> >>   net: smc911x: Convert IO accessors to {read,write}{w,l}()
> >>   net: smc911x: Pass around driver private data
> >>   net: smc911x: Clean up the status handling in smc911x_recv()
> >>   net: smc911x: Split non-DM specific bits from common code
> >>   net: smc911x: Add DM support
> >>
> >>  drivers/net/Kconfig                  |   2 +
> >>  drivers/net/smc911x.c                | 559 +++++++++++++++++++++------
> >>  drivers/net/smc911x.h                | 157 --------
> >>  examples/standalone/Makefile         |   5 +-
> >>  examples/standalone/smc911x_eeprom.c | 150 +++++++
> >>  5 files changed, 602 insertions(+), 271 deletions(-)
> >>
> >> Cc: Joe Hershberger <joe.hershberger at ni.com>
> >> Cc: Masahiro Yamada <yamada.masahiro at socionext.com>
> >
> > For the series:
> > Tested-by: Adam Ford <aford173 at gmail.com> #omap3_logic
>
> Cool, thanks.
>
> Do you plan to convert the OMAP boards to this then ?

Once your patch has been accepted, I will convert the boards that I
maintain.  The way you set it up shows they work using the non-DM and
DM options.  I have verified it on mine using both, but I don't have
the other hardware to verify the functionality, but I'll try to CC a
variety of omap people that I know of so they are aware.

adam