[PATCH 12/12] net: smc911x: Add DM support
Masahiro Yamada
yamada.masahiro at socionext.com
Tue Mar 17 07:55:18 CET 2020
On Mon, Mar 16, 2020 at 2:01 AM Marek Vasut <marek.vasut at gmail.com> wrote:
>
> Add support for U-Boot DM and DT probing. Furthermore, build the
> SMC911x standalone EEPROM example only for the non-DM case, as it
> is not converted yet.
>
> Signed-off-by: Marek Vasut <marek.vasut+renesas at gmail.com>
> Cc: Joe Hershberger <joe.hershberger at ni.com>
> Cc: Masahiro Yamada <yamada.masahiro at socionext.com>
> ---
> board/renesas/blanche/blanche.c | 2 +
Do you need to touch this board in the same commit?
It is unclear to me why.
One more thing, CONFIG_SMC911X_BASE is only used for
non DM_ETH case.
So, can you hide this config option?
diff --git a/drivers/net/Kconfig b/drivers/net/Kconfig
index 4d1013c98466..dcda139156f0 100644
--- a/drivers/net/Kconfig
+++ b/drivers/net/Kconfig
@@ -390,6 +390,7 @@ if SMC911X
config SMC911X_BASE
hex "SMC911X Base Address"
+ depends on !DM_ETH
help
Define this to hold the physical address
of the device (I/O space)
Lastly, mismatch between From: and Signed-off-by.
Without "+renesas" in From,
With "+renesas" in Signed-off-by.
So that you are paid correctly for this work. Just in case. :)
Anyway, this series worked for me with DM_ETH=y.
Good work. Thanks.
> drivers/net/smc911x.c | 114 ++++++++++++++++++++++++++++++++
> examples/standalone/Makefile | 5 +-
> 3 files changed, 120 insertions(+), 1 deletion(-)
>
> diff --git a/board/renesas/blanche/blanche.c b/board/renesas/blanche/blanche.c
> index 7232370d6f..eec1dde106 100644
> --- a/board/renesas/blanche/blanche.c
> +++ b/board/renesas/blanche/blanche.c
> @@ -313,6 +313,7 @@ int board_init(void)
> }
>
> /* Added for BLANCHE(R-CarV2H board) */
> +#ifndef CONFIG_DM_ETH
> int board_eth_init(bd_t *bis)
> {
> int rc = 0;
> @@ -337,6 +338,7 @@ int board_eth_init(bd_t *bis)
>
> return rc;
> }
> +#endif
>
> int dram_init(void)
> {
> diff --git a/drivers/net/smc911x.c b/drivers/net/smc911x.c
> index 71c7a2e632..8abc5e97ac 100644
> --- a/drivers/net/smc911x.c
> +++ b/drivers/net/smc911x.c
> @@ -21,7 +21,9 @@ struct chip_id {
> };
>
> struct smc911x_priv {
> +#ifndef CONFIG_DM_ETH
> struct eth_device dev;
> +#endif
> phys_addr_t iobase;
> const struct chip_id *chipid;
> unsigned char enetaddr[6];
> @@ -371,6 +373,8 @@ static int smc911x_recv_common(struct smc911x_priv *priv, u32 *data)
> return pktlen;
> }
>
> +#ifndef CONFIG_DM_ETH
> +
> #if defined(CONFIG_MII) || defined(CONFIG_CMD_MII)
> /* wrapper for smc911x_eth_phy_read */
> static int smc911x_miiphy_read(struct mii_dev *bus, int phy, int devad,
> @@ -502,3 +506,113 @@ int smc911x_initialize(u8 dev_num, int base_addr)
>
> return 1;
> }
> +
> +#else /* ifdef CONFIG_DM_ETH */
> +
> +static int smc911x_start(struct udevice *dev)
> +{
> + struct eth_pdata *plat = dev_get_platdata(dev);
> + struct smc911x_priv *priv = dev_get_priv(dev);
> +
> + memcpy(priv->enetaddr, plat->enetaddr, sizeof(plat->enetaddr));
> +
> + return smc911x_init_common(priv);
> +}
> +
> +static void smc911x_stop(struct udevice *dev)
> +{
> + struct smc911x_priv *priv = dev_get_priv(dev);
> +
> + smc911x_halt_common(priv);
> +}
> +
> +static int smc911x_send(struct udevice *dev, void *packet, int length)
> +{
> + struct smc911x_priv *priv = dev_get_priv(dev);
> + int ret;
> +
> + ret = smc911x_send_common(priv, packet, length);
> +
> + return ret ? 0 : -ETIMEDOUT;
> +}
> +
> +static int smc911x_recv(struct udevice *dev, int flags, uchar **packetp)
> +{
> + struct smc911x_priv *priv = dev_get_priv(dev);
> + u32 *data = (u32 *)net_rx_packets[0];
> + int ret;
> +
> + ret = smc911x_recv_common(priv, data);
> + if (ret)
> + *packetp = (void *)data;
> +
> + return ret ? ret : -EAGAIN;
> +}
> +
> +static int smc911x_bind(struct udevice *dev)
> +{
> + return device_set_name(dev, dev->name);
> +}
> +
> +static int smc911x_probe(struct udevice *dev)
> +{
> + struct smc911x_priv *priv = dev_get_priv(dev);
> + unsigned long addrh, addrl;
> + int ret;
> +
> + /* Try to detect chip. Will fail if not present. */
> + ret = smc911x_detect_chip(priv);
> + if (ret)
> + return ret;
> +
> + addrh = smc911x_get_mac_csr(priv, ADDRH);
> + addrl = smc911x_get_mac_csr(priv, ADDRL);
> + if (!(addrl == 0xffffffff && addrh == 0x0000ffff)) {
> + /* address is obtained from optional eeprom */
> + priv->enetaddr[0] = addrl;
> + priv->enetaddr[1] = addrl >> 8;
> + priv->enetaddr[2] = addrl >> 16;
> + priv->enetaddr[3] = addrl >> 24;
> + priv->enetaddr[4] = addrh;
> + priv->enetaddr[5] = addrh >> 8;
> + }
> +
> + return 0;
> +}
> +
> +static int smc911x_ofdata_to_platdata(struct udevice *dev)
> +{
> + struct smc911x_priv *priv = dev_get_priv(dev);
> + struct eth_pdata *pdata = dev_get_platdata(dev);
> +
> + pdata->iobase = devfdt_get_addr(dev);
> + priv->iobase = pdata->iobase;
> +
> + return 0;
> +}
> +
> +static const struct eth_ops smc911x_ops = {
> + .start = smc911x_start,
> + .send = smc911x_send,
> + .recv = smc911x_recv,
> + .stop = smc911x_stop,
> +};
> +
> +static const struct udevice_id smc911x_ids[] = {
> + { .compatible = "smsc,lan9115" },
> + { }
> +};
> +
> +U_BOOT_DRIVER(smc911x) = {
> + .name = "eth_smc911x",
> + .id = UCLASS_ETH,
> + .of_match = smc911x_ids,
> + .bind = smc911x_bind,
> + .ofdata_to_platdata = smc911x_ofdata_to_platdata,
> + .probe = smc911x_probe,
> + .ops = &smc911x_ops,
> + .priv_auto_alloc_size = sizeof(struct smc911x_priv),
> + .platdata_auto_alloc_size = sizeof(struct eth_pdata),
> + .flags = DM_FLAG_ALLOC_PRIV_DMA,
> +};
> +#endif
> diff --git a/examples/standalone/Makefile b/examples/standalone/Makefile
> index 0b17a91804..6b061bac69 100644
> --- a/examples/standalone/Makefile
> +++ b/examples/standalone/Makefile
> @@ -5,10 +5,13 @@
>
> extra-y := hello_world
> extra-$(CONFIG_SMC91111) += smc91111_eeprom
> -extra-$(CONFIG_SMC911X) += smc911x_eeprom
> extra-$(CONFIG_SPI_FLASH_ATMEL) += atmel_df_pow2
> extra-$(CONFIG_PPC) += sched
>
> +ifndef CONFIG_DM_ETH
> +extra-$(CONFIG_SMC911X) += smc911x_eeprom
> +endif
> +
> #
> # Some versions of make do not handle trailing white spaces properly;
> # leading to build failures. The problem was found with GNU Make 3.80.
> --
> 2.25.0
>
--
Best Regards
Masahiro Yamada
More information about the U-Boot
mailing list