[Patch v3 3/3] arm: dts: lx2160a: Use flexspi in octal I/O mode

[Priyanka Jain (OSS)]

>-----Original Message-----
>From: U-Boot <u-boot-bounces at lists.denx.de> On Behalf Of Kuldeep Singh
>Sent: Saturday, March 14, 2020 6:24 PM
>To: Priyanka Jain <priyanka.jain at nxp.com>; Jagan Teki
><jagan at amarulasolutions.com>; Vignesh R <vigneshr at ti.com>; u-
>boot at lists.denx.de
>Cc: Kuldeep Singh <kuldeep.singh at nxp.com>
>Subject: [Patch v3 3/3] arm: dts: lx2160a: Use flexspi in octal I/O mode
>
>Configure RX and TX bus-width values to use flexspi in octal I/O mode.
>If bus-widths are not specified, then single I/O mode is set by default.
>
>Signed-off-by: Kuldeep Singh <kuldeep.singh at nxp.com>
>---
2/3, 3/3 Applied to u-boot-fsl-qoriq. Waiting upstream

Thanks
Priyanka