[PATCH v3 06/17] mtd: spi-nor-core: Move SFDP related declarations to top

Pratyush Yadav p.yadav at ti.com
Mon Mar 30 17:45:39 CEST 2020


These structures will be used in a later commit inside another structure
definition. Also take the declarations out of the ifdef since they won't
affect the final binary anyway and will be used in a later commit.

Signed-off-by: Pratyush Yadav <p.yadav at ti.com>
---
 drivers/mtd/spi/spi-nor-core.c | 224 ++++++++++++++++-----------------
 1 file changed, 112 insertions(+), 112 deletions(-)

diff --git a/drivers/mtd/spi/spi-nor-core.c b/drivers/mtd/spi/spi-nor-core.c
index 7b85754e2b..8923935de0 100644
--- a/drivers/mtd/spi/spi-nor-core.c
+++ b/drivers/mtd/spi/spi-nor-core.c
@@ -36,6 +36,118 @@
 
 #define DEFAULT_READY_WAIT_JIFFIES		(40UL * HZ)
 
+struct sfdp_parameter_header {
+	u8		id_lsb;
+	u8		minor;
+	u8		major;
+	u8		length; /* in double words */
+	u8		parameter_table_pointer[3]; /* byte address */
+	u8		id_msb;
+};
+
+#define SFDP_PARAM_HEADER_ID(p)	(((p)->id_msb << 8) | (p)->id_lsb)
+#define SFDP_PARAM_HEADER_PTP(p) \
+	(((p)->parameter_table_pointer[2] << 16) | \
+	 ((p)->parameter_table_pointer[1] <<  8) | \
+	 ((p)->parameter_table_pointer[0] <<  0))
+
+#define SFDP_BFPT_ID		0xff00	/* Basic Flash Parameter Table */
+#define SFDP_SECTOR_MAP_ID	0xff81	/* Sector Map Table */
+#define SFDP_SST_ID		0x01bf	/* Manufacturer specific Table */
+
+#define SFDP_SIGNATURE		0x50444653U
+#define SFDP_JESD216_MAJOR	1
+#define SFDP_JESD216_MINOR	0
+#define SFDP_JESD216A_MINOR	5
+#define SFDP_JESD216B_MINOR	6
+
+struct sfdp_header {
+	u32		signature; /* Ox50444653U <=> "SFDP" */
+	u8		minor;
+	u8		major;
+	u8		nph; /* 0-base number of parameter headers */
+	u8		unused;
+
+	/* Basic Flash Parameter Table. */
+	struct sfdp_parameter_header	bfpt_header;
+};
+
+/* Basic Flash Parameter Table */
+
+/*
+ * JESD216 rev B defines a Basic Flash Parameter Table of 16 DWORDs.
+ * They are indexed from 1 but C arrays are indexed from 0.
+ */
+#define BFPT_DWORD(i)		((i) - 1)
+#define BFPT_DWORD_MAX		16
+
+/* The first version of JESB216 defined only 9 DWORDs. */
+#define BFPT_DWORD_MAX_JESD216			9
+
+/* 1st DWORD. */
+#define BFPT_DWORD1_FAST_READ_1_1_2		BIT(16)
+#define BFPT_DWORD1_ADDRESS_BYTES_MASK		GENMASK(18, 17)
+#define BFPT_DWORD1_ADDRESS_BYTES_3_ONLY	(0x0UL << 17)
+#define BFPT_DWORD1_ADDRESS_BYTES_3_OR_4	(0x1UL << 17)
+#define BFPT_DWORD1_ADDRESS_BYTES_4_ONLY	(0x2UL << 17)
+#define BFPT_DWORD1_DTR				BIT(19)
+#define BFPT_DWORD1_FAST_READ_1_2_2		BIT(20)
+#define BFPT_DWORD1_FAST_READ_1_4_4		BIT(21)
+#define BFPT_DWORD1_FAST_READ_1_1_4		BIT(22)
+
+/* 5th DWORD. */
+#define BFPT_DWORD5_FAST_READ_2_2_2		BIT(0)
+#define BFPT_DWORD5_FAST_READ_4_4_4		BIT(4)
+
+/* 11th DWORD. */
+#define BFPT_DWORD11_PAGE_SIZE_SHIFT		4
+#define BFPT_DWORD11_PAGE_SIZE_MASK		GENMASK(7, 4)
+
+/* 15th DWORD. */
+
+/*
+ * (from JESD216 rev B)
+ * Quad Enable Requirements (QER):
+ * - 000b: Device does not have a QE bit. Device detects 1-1-4 and 1-4-4
+ *         reads based on instruction. DQ3/HOLD# functions are hold during
+ *         instruction phase.
+ * - 001b: QE is bit 1 of status register 2. It is set via Write Status with
+ *         two data bytes where bit 1 of the second byte is one.
+ *         [...]
+ *         Writing only one byte to the status register has the side-effect of
+ *         clearing status register 2, including the QE bit. The 100b code is
+ *         used if writing one byte to the status register does not modify
+ *         status register 2.
+ * - 010b: QE is bit 6 of status register 1. It is set via Write Status with
+ *         one data byte where bit 6 is one.
+ *         [...]
+ * - 011b: QE is bit 7 of status register 2. It is set via Write status
+ *         register 2 instruction 3Eh with one data byte where bit 7 is one.
+ *         [...]
+ *         The status register 2 is read using instruction 3Fh.
+ * - 100b: QE is bit 1 of status register 2. It is set via Write Status with
+ *         two data bytes where bit 1 of the second byte is one.
+ *         [...]
+ *         In contrast to the 001b code, writing one byte to the status
+ *         register does not modify status register 2.
+ * - 101b: QE is bit 1 of status register 2. Status register 1 is read using
+ *         Read Status instruction 05h. Status register2 is read using
+ *         instruction 35h. QE is set via Writ Status instruction 01h with
+ *         two data bytes where bit 1 of the second byte is one.
+ *         [...]
+ */
+#define BFPT_DWORD15_QER_MASK			GENMASK(22, 20)
+#define BFPT_DWORD15_QER_NONE			(0x0UL << 20) /* Micron */
+#define BFPT_DWORD15_QER_SR2_BIT1_BUGGY		(0x1UL << 20)
+#define BFPT_DWORD15_QER_SR1_BIT6		(0x2UL << 20) /* Macronix */
+#define BFPT_DWORD15_QER_SR2_BIT7		(0x3UL << 20)
+#define BFPT_DWORD15_QER_SR2_BIT1_NO_RD		(0x4UL << 20)
+#define BFPT_DWORD15_QER_SR2_BIT1		(0x5UL << 20) /* Spansion */
+
+struct sfdp_bfpt {
+	u32	dwords[BFPT_DWORD_MAX];
+};
+
 static int spi_nor_read_write_reg(struct spi_nor *nor, struct spi_mem_op
 		*op, void *buf)
 {
@@ -1518,118 +1630,6 @@ read_err:
 	return ret;
 }
 
-struct sfdp_parameter_header {
-	u8		id_lsb;
-	u8		minor;
-	u8		major;
-	u8		length; /* in double words */
-	u8		parameter_table_pointer[3]; /* byte address */
-	u8		id_msb;
-};
-
-#define SFDP_PARAM_HEADER_ID(p)	(((p)->id_msb << 8) | (p)->id_lsb)
-#define SFDP_PARAM_HEADER_PTP(p) \
-	(((p)->parameter_table_pointer[2] << 16) | \
-	 ((p)->parameter_table_pointer[1] <<  8) | \
-	 ((p)->parameter_table_pointer[0] <<  0))
-
-#define SFDP_BFPT_ID		0xff00	/* Basic Flash Parameter Table */
-#define SFDP_SECTOR_MAP_ID	0xff81	/* Sector Map Table */
-#define SFDP_SST_ID		0x01bf	/* Manufacturer specific Table */
-
-#define SFDP_SIGNATURE		0x50444653U
-#define SFDP_JESD216_MAJOR	1
-#define SFDP_JESD216_MINOR	0
-#define SFDP_JESD216A_MINOR	5
-#define SFDP_JESD216B_MINOR	6
-
-struct sfdp_header {
-	u32		signature; /* Ox50444653U <=> "SFDP" */
-	u8		minor;
-	u8		major;
-	u8		nph; /* 0-base number of parameter headers */
-	u8		unused;
-
-	/* Basic Flash Parameter Table. */
-	struct sfdp_parameter_header	bfpt_header;
-};
-
-/* Basic Flash Parameter Table */
-
-/*
- * JESD216 rev B defines a Basic Flash Parameter Table of 16 DWORDs.
- * They are indexed from 1 but C arrays are indexed from 0.
- */
-#define BFPT_DWORD(i)		((i) - 1)
-#define BFPT_DWORD_MAX		16
-
-/* The first version of JESB216 defined only 9 DWORDs. */
-#define BFPT_DWORD_MAX_JESD216			9
-
-/* 1st DWORD. */
-#define BFPT_DWORD1_FAST_READ_1_1_2		BIT(16)
-#define BFPT_DWORD1_ADDRESS_BYTES_MASK		GENMASK(18, 17)
-#define BFPT_DWORD1_ADDRESS_BYTES_3_ONLY	(0x0UL << 17)
-#define BFPT_DWORD1_ADDRESS_BYTES_3_OR_4	(0x1UL << 17)
-#define BFPT_DWORD1_ADDRESS_BYTES_4_ONLY	(0x2UL << 17)
-#define BFPT_DWORD1_DTR				BIT(19)
-#define BFPT_DWORD1_FAST_READ_1_2_2		BIT(20)
-#define BFPT_DWORD1_FAST_READ_1_4_4		BIT(21)
-#define BFPT_DWORD1_FAST_READ_1_1_4		BIT(22)
-
-/* 5th DWORD. */
-#define BFPT_DWORD5_FAST_READ_2_2_2		BIT(0)
-#define BFPT_DWORD5_FAST_READ_4_4_4		BIT(4)
-
-/* 11th DWORD. */
-#define BFPT_DWORD11_PAGE_SIZE_SHIFT		4
-#define BFPT_DWORD11_PAGE_SIZE_MASK		GENMASK(7, 4)
-
-/* 15th DWORD. */
-
-/*
- * (from JESD216 rev B)
- * Quad Enable Requirements (QER):
- * - 000b: Device does not have a QE bit. Device detects 1-1-4 and 1-4-4
- *         reads based on instruction. DQ3/HOLD# functions are hold during
- *         instruction phase.
- * - 001b: QE is bit 1 of status register 2. It is set via Write Status with
- *         two data bytes where bit 1 of the second byte is one.
- *         [...]
- *         Writing only one byte to the status register has the side-effect of
- *         clearing status register 2, including the QE bit. The 100b code is
- *         used if writing one byte to the status register does not modify
- *         status register 2.
- * - 010b: QE is bit 6 of status register 1. It is set via Write Status with
- *         one data byte where bit 6 is one.
- *         [...]
- * - 011b: QE is bit 7 of status register 2. It is set via Write status
- *         register 2 instruction 3Eh with one data byte where bit 7 is one.
- *         [...]
- *         The status register 2 is read using instruction 3Fh.
- * - 100b: QE is bit 1 of status register 2. It is set via Write Status with
- *         two data bytes where bit 1 of the second byte is one.
- *         [...]
- *         In contrast to the 001b code, writing one byte to the status
- *         register does not modify status register 2.
- * - 101b: QE is bit 1 of status register 2. Status register 1 is read using
- *         Read Status instruction 05h. Status register2 is read using
- *         instruction 35h. QE is set via Writ Status instruction 01h with
- *         two data bytes where bit 1 of the second byte is one.
- *         [...]
- */
-#define BFPT_DWORD15_QER_MASK			GENMASK(22, 20)
-#define BFPT_DWORD15_QER_NONE			(0x0UL << 20) /* Micron */
-#define BFPT_DWORD15_QER_SR2_BIT1_BUGGY		(0x1UL << 20)
-#define BFPT_DWORD15_QER_SR1_BIT6		(0x2UL << 20) /* Macronix */
-#define BFPT_DWORD15_QER_SR2_BIT7		(0x3UL << 20)
-#define BFPT_DWORD15_QER_SR2_BIT1_NO_RD		(0x4UL << 20)
-#define BFPT_DWORD15_QER_SR2_BIT1		(0x5UL << 20) /* Spansion */
-
-struct sfdp_bfpt {
-	u32	dwords[BFPT_DWORD_MAX];
-};
-
 /* Fast Read settings. */
 
 static void
-- 
2.25.0



More information about the U-Boot mailing list