[PATCH v2 5/5] rockchip: spl: Move board_early_init_f after cpu timer

[Suniel Mahesh]

On Thu, Mar 19, 2020 at 3:43 PM Jagan Teki <jagan at amarulasolutions.com> wrote:
>
> Custom board_early_init_f not only deal with simple gpio
> configuration but also have a possibility to access clocks
> to process any clock related operations like checking reset
> cause state and etc.
>
> So, call it once the rockchip timer initialization done instead
> of calling first place of board_init_f which doesn't have any
> rockchip init code before.
>
> This specific concern was tested with checking reset reason
> via board_early_init_f, which indeed require a clk probe.
>
> Signed-off-by: Jagan Teki <jagan at amarulasolutions.com>
> ---
> Changes for v2:
> - none
>
>  arch/arm/mach-rockchip/spl.c | 5 +++--
>  1 file changed, 3 insertions(+), 2 deletions(-)
>
> diff --git a/arch/arm/mach-rockchip/spl.c b/arch/arm/mach-rockchip/spl.c
> index 48ab0e60c6..4b4e756247 100644
> --- a/arch/arm/mach-rockchip/spl.c
> +++ b/arch/arm/mach-rockchip/spl.c
> @@ -120,8 +120,6 @@ void board_init_f(ulong dummy)
>         debug("\nspl:debug uart enabled in %s\n", __func__);
>  #endif
>
> -       board_early_init_f();
> -
>         ret = spl_early_init();
>         if (ret) {
>                 printf("spl_early_init() failed: %d\n", ret);
> @@ -135,6 +133,9 @@ void board_init_f(ulong dummy)
>         /* Init ARM arch timer in arch/arm/cpu/armv7/arch_timer.c */
>         timer_init();
>  #endif
> +
> +       board_early_init_f();
> +
>  #if !defined(CONFIG_TPL) || defined(CONFIG_SPL_OS_BOOT)
>         debug("\nspl:init dram\n");
>         ret = uclass_get_device(UCLASS_RAM, 0, &dev);
> --
> 2.17.1
>

Tested-by: Suniel Mahesh <sunil at amarulasolutions.com>