[PATCH] imx8qxp_mek: Fix the console command line string

Fabio Estevam festevam at gmail.com
Mon Mar 2 18:24:05 CET 2020

Hi Stefano,

On Mon, Feb 17, 2020 at 3:17 PM Fabio Estevam <festevam at gmail.com> wrote:
> Currently the expansion of the console variable leads to
> the following kernel command line:
> console=ttyLP0,${baudrate} earlycon root=/dev/mmcblk1p2 rootwait rw
> , which causes the console to not show characters after the LPUART driver
> is probed as the 'baudrate' variable is not properly translated.
> Fix it by splitting the console variable in two parts: one for the
> ttyLP0 part and the other one for the baudrate, which matches the way
> it is done on other i.MX targets.
> Tested by successfully booting a mainline kernel on a i.MX8QXP MEK
> board.
> Signed-off-by: Fabio Estevam <festevam at gmail.com>
> ---
> Anatolij's patch is needed for booting:
> https://lists.denx.de/pipermail/u-boot/2020-February/400417.html

Could you please apply this one and Anatolij's patch for the upcoming
2020.04 release?

Also, we have some pending i.MX6 patches converting drivers to DM that
would be nice to be applied to 2020.04 as well.

We would like to have all i.MX6 NXP development boards converted to DM
on 2020.04.


More information about the U-Boot mailing list