[PATCH] cmd: test: Add operators to deal with hexadecimal numbers.

[Christoph Muellner]

The DLUG states the following:
  Almost all U-Boot commands expect numbers to be entered in hexadecimal
  input format.

Besides this fact, also most commands output hex values.

Given this facts, we need to be able to use the information provided
by to/from commands in scripts. The test command does not support
operating on hexadecimal input formats. This leads to very surprising
tests like this (simple_strtol("ff", 10) == 0):

  => if test "ff" -eq 0; then echo "equal"; fi
  equal
  =>

This patch introduces comparison operators for the test command,
that allow parameters in hexadecimal format. So the test above
can be implemented as follows:

  => if test "ff" -heq 0; then echo "equal"; fi
  =>

[1] https://www.denx.de/wiki/view/DULG/UBootCommandLineInterface

Signed-off-by: Christoph Muellner <christoph.muellner at theobroma-systems.com>

---

 cmd/test.c | 36 ++++++++++++++++++++++++++++++++++++
 1 file changed, 36 insertions(+)

diff --git a/cmd/test.c b/cmd/test.c
index 258bfd8806..dbaf23596b 100644
--- a/cmd/test.c
+++ b/cmd/test.c
@@ -25,6 +25,12 @@
 #define OP_INT_GT	14
 #define OP_INT_GE	15
 #define OP_FILE_EXISTS	16
+#define OP_HEX_EQ	17
+#define OP_HEX_NEQ	18
+#define OP_HEX_LT	19
+#define OP_HEX_LE	20
+#define OP_HEX_GT	21
+#define OP_HEX_GE	22
 
 const struct {
 	int arg;
@@ -48,6 +54,12 @@ const struct {
 	{0, "-z", OP_STR_EMPTY, 2},
 	{0, "-n", OP_STR_NEMPTY, 2},
 	{0, "-e", OP_FILE_EXISTS, 4},
+	{1, "-heq", OP_HEX_EQ, 3},
+	{1, "-hne", OP_HEX_NEQ, 3},
+	{1, "-hlt", OP_HEX_LT, 3},
+	{1, "-hle", OP_HEX_LE, 3},
+	{1, "-hgt", OP_HEX_GT, 3},
+	{1, "-hge", OP_HEX_GE, 3},
 };
 
 static int do_test(cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[])
@@ -139,6 +151,30 @@ static int do_test(cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[])
 		case OP_FILE_EXISTS:
 			expr = file_exists(ap[1], ap[2], ap[3], FS_TYPE_ANY);
 			break;
+		case OP_HEX_EQ:
+			expr = simple_strtol(ap[0], NULL, 16) ==
+					simple_strtol(ap[2], NULL, 16);
+			break;
+		case OP_HEX_NEQ:
+			expr = simple_strtol(ap[0], NULL, 16) !=
+					simple_strtol(ap[2], NULL, 16);
+			break;
+		case OP_HEX_LT:
+			expr = simple_strtol(ap[0], NULL, 16) <
+					simple_strtol(ap[2], NULL, 16);
+			break;
+		case OP_HEX_LE:
+			expr = simple_strtol(ap[0], NULL, 16) <=
+					simple_strtol(ap[2], NULL, 16);
+			break;
+		case OP_HEX_GT:
+			expr = simple_strtol(ap[0], NULL, 16) >
+					simple_strtol(ap[2], NULL, 16);
+			break;
+		case OP_HEX_GE:
+			expr = simple_strtol(ap[0], NULL, 16) >=
+					simple_strtol(ap[2], NULL, 16);
+			break;
 		}
 
 		switch (op) {
-- 
2.20.1