[PATCH 2/3] armv8/ls1043ardb: RGMII ports require internal delay

[Madalin Bucur]

The correct setting for the RGMII ports on LS1043ARDB is to
enable delay on both Rx and Tx so the interface mode used must
be PHY_INTERFACE_MODE_RGMII_ID. There is a pull-up that turns
on Rx internal delay by default and the u-boot does not
override that (yet) so in u-boot the interface is functional.
In Linux the PHY driver is clearing the Rx delay for the
"rgmii-txid" mode and the reception does not work.
Changing the RGMII mode to internal delay here ensures that
device tree fix-ups for the PHY connection type turn on both
Tx and Rx internal delay in Linux.

Fixes: 5a78a472f666 ("armv8/ls1043a: RGMII PHY requires internal
	delay on Tx")
Signed-off-by: Madalin Bucur <madalin.bucur at oss.nxp.com>
---
 drivers/net/fm/ls1043.c | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

diff --git a/drivers/net/fm/ls1043.c b/drivers/net/fm/ls1043.c
index cd510f2..ba4da69 100644
--- a/drivers/net/fm/ls1043.c
+++ b/drivers/net/fm/ls1043.c
@@ -65,12 +65,12 @@ phy_interface_t fman_port_enet_if(enum fm_port port)
 	if (port == FM1_DTSEC3)
 		if ((rcwsr13 & FSL_CHASSIS2_RCWSR13_EC1) ==
 				FSL_CHASSIS2_RCWSR13_EC1_DTSEC3_RGMII) {
-			return PHY_INTERFACE_MODE_RGMII_TXID;
+			return PHY_INTERFACE_MODE_RGMII_ID;
 		}
 	if (port == FM1_DTSEC4)
 		if ((rcwsr13 & FSL_CHASSIS2_RCWSR13_EC2) ==
 				FSL_CHASSIS2_RCWSR13_EC2_DTSEC4_RGMII) {
-			return PHY_INTERFACE_MODE_RGMII_TXID;
+			return PHY_INTERFACE_MODE_RGMII_ID;
 		}
 
 	/* handle SGMII */
-- 
2.1.0