[PATCH] include/configs: ls1012aqds: add default environment variable

[Biwen Li]

This adds default environment variable for ls1012aqds

Signed-off-by: Biwen Li <biwen.li at nxp.com>
---
 include/configs/ls1012aqds.h | 67 ++++++++++++++++++++++++++++++++++++
 1 file changed, 67 insertions(+)

diff --git a/include/configs/ls1012aqds.h b/include/configs/ls1012aqds.h
index fb0d1ba6b2..80cd50ac36 100644
--- a/include/configs/ls1012aqds.h
+++ b/include/configs/ls1012aqds.h
@@ -110,5 +110,72 @@
 #define CONFIG_SYS_MEMTEST_START	0x80000000
 #define CONFIG_SYS_MEMTEST_END		0x9fffffff
 
+#undef CONFIG_EXTRA_ENV_SETTINGS
+#define CONFIG_EXTRA_ENV_SETTINGS		\
+	"verify=no\0"				\
+	"fdt_high=0xffffffffffffffff\0"		\
+	"initrd_high=0xffffffffffffffff\0"	\
+	"fdt_addr=0x00f00000\0"			\
+	"kernel_addr=0x01000000\0"		\
+	"kernelheader_addr=0x600000\0"		\
+	"scriptaddr=0x80000000\0"		\
+	"scripthdraddr=0x80080000\0"		\
+	"fdtheader_addr_r=0x80100000\0"		\
+	"kernelheader_addr_r=0x80200000\0"	\
+	"kernel_addr_r=0x96000000\0"		\
+	"fdt_addr_r=0x90000000\0"		\
+	"load_addr=0xa0000000\0"		\
+	"kernel_size=0x2800000\0"		\
+	"kernelheader_size=0x40000\0"		\
+	"console=ttyS0,115200\0"		\
+	BOOTENV					\
+	"boot_scripts=ls1012aqds_boot.scr\0"	\
+	"boot_script_hdr=hdr_ls1012aqds_bs.out\0"	\
+	"scan_dev_for_boot_part="		\
+	     "part list ${devtype} ${devnum} devplist; "	\
+	     "env exists devplist || setenv devplist 1; "	\
+	     "for distro_bootpart in ${devplist}; do "		\
+		  "if fstype ${devtype} "			\
+		      "${devnum}:${distro_bootpart} "		\
+		      "bootfstype; then "			\
+		      "run scan_dev_for_boot; "	\
+		  "fi; "			\
+	      "done\0"				\
+	"scan_dev_for_boot="				  \
+		"echo Scanning ${devtype} "		  \
+				"${devnum}:${distro_bootpart}...; "  \
+		"for prefix in ${boot_prefixes}; do "	  \
+			"run scan_dev_for_scripts; "	  \
+		"done;"					  \
+		"\0"					  \
+	"boot_a_script="				  \
+		"load ${devtype} ${devnum}:${distro_bootpart} "  \
+			"${scriptaddr} ${prefix}${script}; "    \
+		"env exists secureboot && load ${devtype} "     \
+			"${devnum}:${distro_bootpart} "		\
+			"${scripthdraddr} ${prefix}${boot_script_hdr}; " \
+			"env exists secureboot "	\
+			"&& esbc_validate ${scripthdraddr};"    \
+		"source ${scriptaddr}\0"	  \
+	"installer=load mmc 0:2 $load_addr "	\
+		   "/flex_installer_arm64.itb; "	\
+		   "bootm $load_addr#$board\0"	\
+	"qspi_bootcmd=pfe stop; echo Trying load from qspi..;"	\
+		"sf probe 0:0 && sf read $load_addr "	\
+		"$kernel_addr $kernel_size; env exists secureboot "	\
+		"&& sf read $kernelheader_addr_r $kernelheader_addr "	\
+		"$kernelheader_size && esbc_validate ${kernelheader_addr_r}; " \
+		"bootm $load_addr#$board\0"
+
+#undef CONFIG_BOOTCOMMAND
+#ifdef CONFIG_TFABOOT
+#undef QSPI_NOR_BOOTCOMMAND
+#define QSPI_NOR_BOOTCOMMAND "pfe stop; run distro_bootcmd; run qspi_bootcmd; "\
+			     "env exists secureboot && esbc_halt;"
+#else
+#define CONFIG_BOOTCOMMAND "pfe stop; run distro_bootcmd; run qspi_bootcmd; "\
+			   "env exists secureboot && esbc_halt;"
+#endif
+
 #include <asm/fsl_secure_boot.h>
 #endif /* __LS1012AQDS_H__ */
-- 
2.17.1