[PATCH V2 03/14] ARM: dts: stm32: Repair SDMMC1 operation on AV96

[Patrice CHOTARD]

Hi Marek

On 3/31/20 2:48 AM, Marek Vasut wrote:
> The SD uses different pinmux for the D123DIRline, use such a pinmux,
> otherwise there is a pinmux collision on the AV96. Add missing SD
> voltage regulator switch and enable SDR104 operation.
>
> Signed-off-by: Marek Vasut <marex at denx.de>
> Cc: Patrick Delaunay <patrick.delaunay at st.com>
> Cc: Patrice Chotard <patrice.chotard at st.com>

Reviewed-by: Patrice Chotard <patrice.chotard at st.com>

Thanks

> ---
> V2: New patch
> ---
>  .../arm/dts/stm32mp157a-avenger96-u-boot.dtsi |  2 +-
>  arch/arm/dts/stm32mp157a-avenger96.dts        | 25 ++++++++++++++++---
>  2 files changed, 22 insertions(+), 5 deletions(-)
>
> diff --git a/arch/arm/dts/stm32mp157a-avenger96-u-boot.dtsi b/arch/arm/dts/stm32mp157a-avenger96-u-boot.dtsi
> index 8dcd8866e8..47bfbb8d77 100644
> --- a/arch/arm/dts/stm32mp157a-avenger96-u-boot.dtsi
> +++ b/arch/arm/dts/stm32mp157a-avenger96-u-boot.dtsi
> @@ -150,7 +150,7 @@
>  	};
>  };
>  
> -&sdmmc1_dir_pins_a {
> +&sdmmc1_dir_pins_b {
>  	u-boot,dm-spl;
>  	pins1 {
>  		u-boot,dm-spl;
> diff --git a/arch/arm/dts/stm32mp157a-avenger96.dts b/arch/arm/dts/stm32mp157a-avenger96.dts
> index 3065593bf2..1e9b45b69d 100644
> --- a/arch/arm/dts/stm32mp157a-avenger96.dts
> +++ b/arch/arm/dts/stm32mp157a-avenger96.dts
> @@ -76,6 +76,20 @@
>  			default-state = "off";
>  		};
>  	};
> +
> +	sd_switch: regulator-sd_switch {
> +		compatible = "regulator-gpio";
> +		regulator-name = "sd_switch";
> +		regulator-min-microvolt = <1800000>;
> +		regulator-max-microvolt = <2900000>;
> +		regulator-type = "voltage";
> +		regulator-always-on;
> +
> +		gpios = <&gpioi 5 GPIO_ACTIVE_HIGH>;
> +		gpios-states = <0>;
> +		states = <1800000 0x1>,
> +			 <2900000 0x0>;
> +	};
>  };
>  
>  &ethernet0 {
> @@ -296,15 +310,18 @@
>  
>  &sdmmc1 {
>  	pinctrl-names = "default", "opendrain", "sleep";
> -	pinctrl-0 = <&sdmmc1_b4_pins_a &sdmmc1_dir_pins_a>;
> -	pinctrl-1 = <&sdmmc1_b4_od_pins_a>;
> -	pinctrl-2 = <&sdmmc1_b4_sleep_pins_a>;
> -	broken-cd;
> +	pinctrl-0 = <&sdmmc1_b4_pins_a &sdmmc1_dir_pins_b>;
> +	pinctrl-1 = <&sdmmc1_b4_od_pins_a &sdmmc1_dir_pins_b>;
> +	pinctrl-2 = <&sdmmc1_b4_sleep_pins_a &sdmmc1_dir_sleep_pins_b>;
> +	cd-gpios = <&gpioi 8 GPIO_ACTIVE_LOW>;
> +	disable-wp;
>  	st,sig-dir;
>  	st,neg-edge;
>  	st,use-ckin;
> +	sd-uhs-sdr104;
>  	bus-width = <4>;
>  	vmmc-supply = <&vdd_sd>;
> +	vqmmc-supply = <&sd_switch>;
>  	status = "okay";
>  };
>