Aw: Re: Re: Re: [ANN] U-Boot v2020.07-rc1 released

[Marek Vasut]

On 5/1/20 7:48 PM, Frank Wunderlich wrote:
>>>> Gesendet: Freitag, 01. Mai 2020 um 17:39 Uhr
>>>> Von: "Marek Vasut" <marex at denx.de>
>>>> Build failed, please fix:
>>>> https://gitlab.denx.de/u-boot/custodians/u-boot-usb/pipelines/3054
> 
> could you try if all tests passing after this Patch?
> 
> regards Frank
> 
> commit 9c4a3633e92dbcd51aa60ff14693adc900e3c816
> Author: Frank Wunderlich <frank-w at public-files.de>
> Date:   Fri May 1 19:32:12 2020 +0200
> 
>     fix build-error for xilinx-board caused by xhci-Patches
> 
>     Fixes: "usb: dwc3: use the phy bulk API to get phys"
> 
> diff --git a/drivers/usb/host/xhci-dwc3.c b/drivers/usb/host/xhci-dwc3.c
> index 9fcfa39d4b..563db1a426 100644
> --- a/drivers/usb/host/xhci-dwc3.c
> +++ b/drivers/usb/host/xhci-dwc3.c
> @@ -19,8 +19,7 @@
>  #include <linux/usb/otg.h>
> 
>  struct xhci_dwc3_platdata {
> -       struct phy *usb_phys;
> -       int num_phys;
> +       struct phy_bulk *usb_phys;
>  };
> 
>  void dwc3_set_mode(struct dwc3 *dwc3_reg, u32 mode)
> @@ -125,7 +124,7 @@ static int xhci_dwc3_probe(struct udevice *dev)
>         hcor = (struct xhci_hcor *)((uintptr_t)hccr +
>                         HC_LENGTH(xhci_readl(&(hccr)->cr_capbase)));
> 
> -       ret = dwc3_setup_phy(dev, &plat->usb_phys, &plat->num_phys);
> +       ret = dwc3_setup_phy(dev, plat->usb_phys);
>         if (ret && (ret != -ENOTSUPP))
>                 return ret;
> 
> @@ -168,7 +167,7 @@ static int xhci_dwc3_remove(struct udevice *dev)
>  {
>         struct xhci_dwc3_platdata *plat = dev_get_platdata(dev);
> 
> -       dwc3_shutdown_phy(dev, plat->usb_phys, plat->num_phys);
> +       dwc3_shutdown_phy(dev, plat->usb_phys);
> 
>         return xhci_deregister(dev);
>  }

It's a build failure, build it for versal_virt and see if the error is
gone. Is it ?