May 2020 Archives by date

• Messages sorted by: [ thread ] [ subject ] [ author ]
• More info on this list...

Starting: Fri May 1 00:04:54 CEST 2020
Ending: Sun May 31 22:52:16 CEST 2020
Messages: 4691

• Pull request for UEFI sub-system for efi-2020-07-rc2   Tom Rini
• [PATCH v2 1/8] iopoll: Add dealy to read poll   Tom Rini
• [ANN] U-Boot v2020.07-rc1 released   Tom Rini
• [PATCH 2/8] net: dwc_eth_qos: Fix the software reset   Stephen Warren
• [PATCH 3/8] net: dwc_eth_qos: Add option "snps, reset-gpio" phy-rst gpio for stm32   Stephen Warren
• [PATCH 4/8] net: dwc_eth_qos: Move interface() to eqos_ops struct   Stephen Warren
• [PATCH 3/8] net: dwc_eth_qos: Add option "snps, reset-gpio" phy-rst gpio for stm32   Stephen Warren
• [PATCH 5/8] net: dwc_eth_qos: Make clk_rx and clk_tx optional   Stephen Warren
• [PATCH 7/8] net: dwc_eth_qos: Export common struct and interface at head file   Stephen Warren
• [PATCH 8/8] net: gmac_rockchip: Add dwc_eth_qos support   Stephen Warren
• [PATCH v3 0/7] x86: efi: Add a 64-bit coreboot payload   Simon Glass
• [PATCH v3 1/7] x86: Move coreboot-table detection to common 32/64-bit code   Simon Glass
• [PATCH v3 2/7] x86: Allow building an SPL image for coreboot   Simon Glass
• [PATCH v3 3/7] x86: Move work-around out of cpu_jump_to_64bit_uboot()   Simon Glass
• [PATCH v3 4/7] x86: Update SPL for coreboot   Simon Glass
• [PATCH v3 5/7] x86: coreboot: Allow building an SPL image   Simon Glass
• [PATCH v3 6/7] x86: Add an indication of 32/64-bit to bdinfo   Simon Glass
• [PATCH v3 7/7] x86: Add a 64-bit coreboot build   Simon Glass
• [PATCH v3 6/7] x86: Add an indication of 32/64-bit to bdinfo   Heinrich Schuchardt
• [PATCH v3 7/7] x86: Add a 64-bit coreboot build   Heinrich Schuchardt
• [PATCH v3 6/7] x86: Add an indication of 32/64-bit to bdinfo   Simon Glass
• [PATCH v4 6/7] x86: Add an indication of 32/64-bit to bdinfo   Simon Glass
• [PATCH v2 2/2] Makefile: Only build dtc if needed   Simon Glass
• [PATCH v3 7/7] x86: Add a 64-bit coreboot build   Simon Glass
• [PATCH v3 7/7] x86: Add a 64-bit coreboot build   Heinrich Schuchardt
• [PATCH v4 6/7] x86: Add an indication of 32/64-bit to bdinfo   Heinrich Schuchardt
• [PATCH 8/8] qemu: arm64: Add documentation for capsule update   Sughosh Ganu
• [PATCH] efi_loader: fixe unreachable statement in efi_sigstore_parse_siglist   Heinrich Schuchardt
• [PATCH] efi_loader: factor out the common code from efi_transfer_secure_state()   Heinrich Schuchardt
• [PATCH v7 04/14] test: dm: phy: add a test item for the phy_bulk API   Jagan Teki
• [PATCH v2 1/9] usb: dwc3: add dis_enblslpm_quirk   Jagan Teki
• [PATCH 01/10] efi_loader: disk: add efi_disk_is_system_part()   Heinrich Schuchardt
• [PATCH v2 9/9] configs: evb-rk3399: update support usb3.0 host   Jagan Teki
• [PATCH v2 5/9] phy: rockchip: add a new driver for type-c phy   Jagan Teki
• [PATCH v2 7/9] ARM: dts: rk3399: amend dwc3 related nodes   Jagan Teki
• [PATCH v2 0/9] Add Rockchip RK3399 USB3.0 Host support   Jagan Teki
• [RESEND 1/4] powerpc: Enable device tree support for P1010RDB   Biwen Li
• [RESEND 2/4] powerpc: P1010RDB: Compile legacy PCIe routines conditionally   Biwen Li
• [RESEND 3/4] powerpc: P1010RDB: Disable legacy PCIe driver when DM_PCI is enabled   Biwen Li
• [RESEND 4/4] configs: P1010RDB: Enable PCIe driver   Biwen Li
• am65x build issues   Jan Kiszka
• [ANN] U-Boot v2020.07-rc1 released   Marek Vasut
• [RESEND 1/4] powerpc: Enable device tree support for P1010RDB   Priyanka Jain (OSS)
• [v2 01/27] rtc: ds1337: Add driver model support   Priyanka Jain (OSS)
• [PATCH 3/8] qemu: arm64: Add support for efi firmware management protocol routines   Heinrich Schuchardt
• [PATCH v3 1/7] x86: Move coreboot-table detection to common 32/64-bit code   Bin Meng
• [PATCH v3 2/7] x86: Allow building an SPL image for coreboot   Bin Meng
• [PATCH v3 3/7] x86: Move work-around out of cpu_jump_to_64bit_uboot()   Bin Meng
• [PATCH v3 4/7] x86: Update SPL for coreboot   Bin Meng
• [PATCH v3 5/7] x86: coreboot: Allow building an SPL image   Bin Meng
• [PATCH v4 6/7] x86: Add an indication of 32/64-bit to bdinfo   Bin Meng
• [PATCH v3 1/7] x86: Move coreboot-table detection to common 32/64-bit code   Bin Meng
• [PATCH v3 2/7] x86: Allow building an SPL image for coreboot   Bin Meng
• [PATCH v3 3/7] x86: Move work-around out of cpu_jump_to_64bit_uboot()   Bin Meng
• [RFC][PATCH] mkimage: fit: Do not tail-pad fitImage with external data   Marek Vasut
• [PATCH v3 4/7] x86: Update SPL for coreboot   Bin Meng
• [PATCH v3 5/7] x86: coreboot: Allow building an SPL image   Bin Meng
• [PATCH v4 6/7] x86: Add an indication of 32/64-bit to bdinfo   Bin Meng
• [PATCH v2 7/7] rockchip: make_fit_atf: add signature handling   Kever Yang
• [PATCH v3 7/7] x86: Add a 64-bit coreboot build   Bin Meng
• [PATCH v3 1/2] net: fec: Add possibility to enable TXC delay   Stefano Babic
• [v2 1/4] powerpc: Enable device tree support for P1010RDB   Biwen Li
• [v2 2/4] powerpc: P1010RDB: Compile legacy PCIe routines conditionally   Biwen Li
• [v2 3/4] powerpc: P1010RDB: Disable legacy PCIe driver when DM_PCI is enabled   Biwen Li
• [v2 4/4] configs: P1010RDB: Enable PCIe driver   Biwen Li
• [v3 01/27] rtc: ds1337: Add driver model support   Biwen Li
• [v3 02/27] rtc: pt7c4338: Add driver model support   Biwen Li
• [v3 03/27] powerpc: create dts component of i2c to build up an SoC   Biwen Li
• [v3 04/27] dm: powerpc: P5040DS: add i2c DM support   Biwen Li
• [v3 05/27] configs: P5040DS: enable DM_I2C   Biwen Li
• [v3 06/27] dm: powerpc: P1020: add i2c DM support   Biwen Li
• [v3 07/27] configs: P1020RDB: enable DM_I2C and DM_RTC   Biwen Li
• [v3 08/27] dts: powerpc: P2020RDB: add i2c node   Biwen Li
• [v3 09/27] configs: P2020RDB: enable DM_I2C and DM_RTC   Biwen Li
• [v3 10/27] dm: powerpc: P2041RDB: add i2c DM support   Biwen Li
• [v3 11/27] config: P2041RDB: enable DM_I2C   Biwen Li
• [v3 12/27] powerpc: dts: P3041: add i2c node   Biwen Li
• [v3 13/27] configs: P3041DS: enable DM_I2C   Biwen Li
• [v3 14/27] powerpc: dts: P4080: add i2c node   Biwen Li
• [v3 15/27] configs: P4080DS: enable DM_I2C   Biwen Li
• [v3 16/27] dm: powerpc: T1023/T1024: add i2c DM support   Biwen Li
• [v3 17/27] configs: T1024RDB: enable DM_I2C and DM_RTC   Biwen Li
• [v3 18/27] dm: ppc: p1010: add i2c DM support   Biwen Li
• [v3 19/27] configs: P1010: Enable DM_I2C and DM_RTC   Biwen Li
• [v3 20/27] dm: ppc: MPC8548CDS: add i2c DM support   Biwen Li
• [v3 21/27] configs: MPC8548CDS: enable DM_I2C   Biwen Li
• [v3 22/27] dm: ppc: T4240: add i2c DM support   Biwen Li
• [v3 23/27] configs: T4240RDB: enable DM_I2C   Biwen Li
• [v3 24/27] dm: powerpc: T2080/T2081: add i2c DM support   Biwen Li
• [v3 25/27] configs: T2080: enable DM_I2C   Biwen Li
• [v3 26/27] dm: powerpc: T1040/T1042: add i2c DM support   Biwen Li
• [v3 27/27] configs: T1042D4RDB: enable DM_I2C and DM_RTC   Biwen Li
• [v4] dm: ppc: MPC8548CDS: add i2c DM support   Biwen Li
• Pull request v3: u-boot-spi/master   Tom Rini
• [PATCH v7 0/9] dm: Add programmatic generation of ACPI tables (part A)   Simon Glass
• pull request of u-boot-fsl-qoriq for v2020.07   Priyanka Jain (OSS)
• [PATCH] rtc: pcf2127: don't add/subtract 1 to tm_mon   Rasmus Villemoes
• [PATCH v5 0/1] x86: efi: Add a 64-bit coreboot payload   Simon Glass
• [PATCH v5 1/1] x86: Add a 64-bit 'coreboot64' build   Simon Glass
• [PATCH V2 1/9] uclass: cpu: Add new API to get udevice for current CPU   Peng Fan
• [PATCH V2 2/9] cpu: sandbox: support is_current   Peng Fan
• [PATCH V2 3/9] test: cpu: test current cpu   Peng Fan
• [PATCH V2 4/9] common: board_f: Use cpu_get_current_dev in print_cpuinfo   Peng Fan
• [PATCH V2 5/9] cpu: imx8: reimplement get cpu count   Peng Fan
• [PATCH V2 6/9] cpu: imx8: support a72 as boot cpu   Peng Fan
• [PATCH V2 7/9] cpu: imx8: fix get core name and rate   Peng Fan
• [PATCH V2 8/9] cpu: imx_cpu: Print the CPU temperature for iMX8QM A72   Peng Fan
• [PATCH V2 9/9] cpu: imx8: show RevC instead of Rev? at boot log   Peng Fan
• Aw: Re: [ANN] U-Boot v2020.07-rc1 released   Frank Wunderlich
• [PATCH V2 resend 0/4] support i.MX module fuse   Peng Fan
• [PATCH V2 resend 1/4] imx: add module fuse support   Peng Fan
• [PATCH V2 resend 2/4] i2c: mxc: add fuse check   Peng Fan
• [PATCH V2 resend 3/4] usb: mx6: add fuse check   Peng Fan
• [PATCH V2 resend 4/4] net: fec: add fuse check   Peng Fan
• getting battery status from RTC driver   Rasmus Villemoes
• [PATCH v2 1/8] iopoll: Add dealy to read poll   Jagan Teki
• [PATCH] actions: Fix syntax for enabling SYS_RELOC_GD_ENV_ADDR   Tom Rini
• [PATCH 0/5] some sysreset patches (mostly for mpc83xx)   Rasmus Villemoes
• [PATCH 1/5] sysreset: mpc83xx: use scnprintf instead of snprintf   Rasmus Villemoes
• [PATCH 2/5] sysreset: mpc83xx: shuffle newline logic in mpc83xx_sysreset_get_status   Rasmus Villemoes
• [PATCH 3/5] sysreset: mpc83xx: fix CONFIG_IS_ENABLED logic   Rasmus Villemoes
• [PATCH 4/5] sysreset: mpc83xx: add output in case of cold boot   Rasmus Villemoes
• [PATCH 5/5] sysreset: move print_resetinfo() to sysreset-uclass.c   Rasmus Villemoes
• [PATCH] image: Add support for ZSTD decompression   Tom Rini
• [RFC][PATCH] mkimage: fit: Do not tail-pad fitImage with external data   Tom Rini
• Aw: Re: [ANN] U-Boot v2020.07-rc1 released   Marek Vasut
• [PATCH] image: Add support for ZSTD decompression   Robert Marko
• Aw: Re: [ANN] U-Boot v2020.07-rc1 released   Marek Vasut
• [PATCH V2] mkimage: fit: Do not tail-pad fitImage with external data   Marek Vasut
• [PATCH V4 13/13] net: smc911x: Add DM support   Marek Vasut
• Aw: Re: Re: [ANN] U-Boot v2020.07-rc1 released   Frank Wunderlich
• Aw: Re: Re: [ANN] U-Boot v2020.07-rc1 released   Marek Vasut
• [ANN] U-Boot v2020.07-rc1 released   Anatolij Gustschin
• [PULL] u-boot-sh/next network cleanup part 1   Marek Vasut
• [ANN] U-Boot v2020.07-rc1 released   Marek Vasut
• [PATCH v2 3/5] verdin-imx8mm: Change board phy skew values for our ksz9031   sbabic at denx.de
• [PATCH] imx8qxp_mek: Remove SPL watchdog option   sbabic at denx.de
• [PATCH 7/8] ARM: imx8m: Fix reset in SPL on Toradex iMX8MM Verdin   sbabic at denx.de
• [PATCH] dt-bindings: pinctrl: imxrt1020: remove useless comment   sbabic at denx.de
• [PATCH 1/3] ARM: reset: use do_reset in SPL/TPL if SYSRESET was not enabled for them   sbabic at denx.de
• [PATCH] ARM: imx: imx8m: Do not warn about cpu-idle-states if missing   sbabic at denx.de
• [PATCH v3 1/2] net: fec: Add possibility to enable TXC delay   sbabic at denx.de
• [PATCH 6/8] ARM: imx8m: Fix reset in SPL on NXP iMX8MP EVK   sbabic at denx.de
• [Patch v5 3/7] treewide: Remove unused FSL QSPI config options for IMX platforms   sbabic at denx.de
• [PATCH v3 2/2] config: apalis-imx8: Enable FEC TXC delay   sbabic at denx.de
• [PATCH 3/8] ARM: imx8m: Don't use the addr parameter of reset_cpu()   sbabic at denx.de
• [PATCH 2/2] mx8mq_evk: Remove unrelated comment   sbabic at denx.de
• [PATCH 5/8] ARM: imx8m: Fix reset in SPL on NXP iMX8MN EVK   sbabic at denx.de
• [PATCH] arm: dts: imx8mm: sync dts from Linux Kernel 5.6.7   sbabic at denx.de
• [PATCH 3/3] imx: imx8m: Don't use the addr parameter of reset_cpu   sbabic at denx.de
• [PATCH] imx8: Run SPL with caches enabled   sbabic at denx.de
• [PATCH 1/2] imx8mp_evk: Remove unrelated comment   sbabic at denx.de
• [PATCH 4/8] ARM: imx8m: Fix reset in SPL on NXP iMX8MM EVK   sbabic at denx.de
• [PATCH 1/8] ARM: imx8m: Do not define do_reset() if sysreset is enabled   sbabic at denx.de
• [PATCH] imx8qxp_mek: Run with caches enabled   sbabic at denx.de
• [PATCH] arm: imx: Add support for Google's Coral Dev Board   sbabic at denx.de
• [PATCH 2/8] ARM: imx8m: Fix indentation of reset_cpu() function   sbabic at denx.de
• [PATCH v2 5/5] board: apalis_imx6: Add KSZ9131 phy skew settings   sbabic at denx.de
• [PATCH v2 1/5] net: phy: micrel: Use defines for PHY_IDs and MASK   sbabic at denx.de
• [PATCH v2 4/5] board: verdin-imx8mm: Add KSZ9131 phy skew settings   sbabic at denx.de
• [PATCH 2/3] imx: imx8m*: Remove do_reset from board files   sbabic at denx.de
• [PATCH v2 2/5] net: phy: micrel: Add basic support for KSZ9131   sbabic at denx.de
• [PATCH 1/2] spi: Zap sh_spi driver   Jagan Teki
• [PATCH 2/2] spi: Zap lpc32xx_ssp driver-related code   Jagan Teki
• [PATCH 2/2] sunxi: defconfig for FriendlyArm nanopi-duo2   Jagan Teki
• [PATCH] image: Add support for ZSTD decompression   Tom Rini
• [PATCH] board: sunxi: enable status LED in SPL   Jagan Teki
• [PATCH 1/2] spi: Zap sh_spi driver   Marek Vasut
• [PATCH] sunxi: A20-OLinuXino-Lime2: enable PHY config to fix broken ethernet   Jagan Teki
• [PATCH 1/2] spi: Zap sh_spi driver   Jagan Teki
• [PATCH] sunxi: add support for Banana Pi P2 Zero board   Jagan Teki
• [PATCH 1/4] mach-sunxi: Refactor sunxi SPI-SPL   Jagan Teki
• [PATCH] sunxi: A20-OLinuXino-Lime2: enable PHY config to fix broken ethernet   Anatolij Gustschin
• reset on mpc83xx   Christophe Leroy
• [PATCH v7 10/14] xhci: mediatek: Add support for MTK xHCI host controller   Jagan Teki
• Aw: Re: Re: Re: [ANN] U-Boot v2020.07-rc1 released   Frank Wunderlich
• Aw: Re: Re: Re: [ANN] U-Boot v2020.07-rc1 released   Marek Vasut
• Aw: Re: Re: Re: Re: [ANN] U-Boot v2020.07-rc1 released   Frank Wunderlich
• [PATCH 1/2] phy: Fix node description of phy_get_by_node   Jagan Teki
• [PATCH 2/2] phy: Use _nodev naming convention if non-device clients   Jagan Teki
• [PATCH] clk: Fix clk func names in comments   Jagan Teki
• Aw: Re: Re: Re: Re: [ANN] U-Boot v2020.07-rc1 released   Marek Vasut
• [PATCH v5 1/4] omap: mmc: Avoid using libfdt with of-platdata   Tom Rini
• Commits missing sign-off from Maintainer/Custodian   Tom Rini
• [PATCH 4/8] x86: slimbootloader: Support 64-bit operation   Park, Aiden
• [PATCH 1/8] x86: Add a new X86_RUN_64BIT_ONLY to Kconfig   Park, Aiden
• [PATCH 1/1] .readthedocs.yml: fix type docs/   Heinrich Schuchardt
• [PATCH] imx8mq_phanbell: Run SPL with caches enabled   Fabio Estevam
• [PATCH v3] cmd: mvebu: bubt: fix quoted string split across lines   Joel Johnson
• [PATCH v2] configs: migrate CONFIG_SYS_ARM_CACHE_* in Kconfig   Tom Rini
• [PATCH] tiny-printf: Support %i   Tom Rini
• [PATCH v2 1/3] common/board_r: arm: Merge initr_enable_interrupts into interrupts_init   Tom Rini
• [PATCH v2 2/3] cmd/bedbug.c: Make bedbug_init have a return value   Tom Rini
• [PATCH v2 3/3] common/board_r: Drop initr_bedbug wrapper   Tom Rini
• [PATCH v2 1/3] arm: caches: protect dram_bank_mmu_setup access to bi_dram   Tom Rini
• [PATCH v2 2/3] arm: caches: add DCACHE_DEFAULT_OPTION   Tom Rini
• [PATCH v2 3/3] arm: caches: manage phys_addr_t overflow in mmu_set_region_dcache_behaviour   Tom Rini
• [PATCH] doc: describe the analysis of crash dumps   Tom Rini
• [PATCH v1 1/3] timer MediaTek use upstream compatible   Tom Rini
• [PATCH v1 2/3] watchdog MediaTek add upstream compatible   Tom Rini
• [PATCH v1 3/3] arm: enable distro boot for bananapi-r2   Tom Rini
• [PATCH 1/2] tools/mkimage: fix handling long filenames   Tom Rini
• [PATCH 2/2] tools/fit-image: print a warning when cmd-line for dtc might be truncated   Tom Rini
• [PATCH 1/1] cmd/gpt: avoid NULL check before free()   Tom Rini
• [PATCH 1/1] fs: ext4: avoid NULL check before free()   Tom Rini
• [PATCH 1/1] hush: avoid NULL check before free()   Tom Rini
• [PATCH v3 1/2] test/py: vboot: add a test to check fit signature on fit with padding   Tom Rini
• [PATCH v3 2/2] rsa: sig: fix config signature check for fit with padding   Tom Rini
• [PATCH v3] malloc: dlmalloc: add an ability for the malloc to be re-init/init multiple times   Tom Rini
• [PATCH] rtc: pcf2127: don't add/subtract 1 to tm_mon   Tom Rini
• [PATCH 1/1] .readthedocs.yml: fix type docs/   Tom Rini
• [PATCH] actions: Fix syntax for enabling SYS_RELOC_GD_ENV_ADDR   Tom Rini
• [PATCH 1/2] patman: Sort the command line options   Bin Meng
• [PATCH 2/2] patman: Add an option to create patches without binary contents   Bin Meng
• Pull request: u-boot-rockchip-20200501   Kever Yang
• [PATCH v3 1/3] iopoll: Add read_poll_timeout common API   Jagan Teki
• [PATCH v3 2/3] iopoll: Add dealy to read poll   Jagan Teki
• [PATCH v3 3/3] iopoll: Add readl_poll_sleep_timeout   Jagan Teki
• ReadTheDocs integration   Heinrich Schuchardt
• [yocto] Which recipe for Linux tools to run u-boot command inside Linux?   Jupiter
• [PATCH v1 00/10] mips: Add initial Octeon MIPS64 base support   Stefan Roese
• [PATCH v1 01/10] mips: octeon: Initial minimal support for the Marvell Octeon SoC   Stefan Roese
• [PATCH v1 02/10] mips: cache: Allow using CONFIG_MIPS_L2_CACHE without CONFIG_MIPS_CM   Stefan Roese
• [PATCH v1 03/10] mips: cache: Don't use cache operations with CONFIG_MIPS_CACHE_COHERENT   Stefan Roese
• [PATCH v1 04/10] mips: traps: Set WG bit in EBase register on Octeon   Stefan Roese
• [PATCH v1 05/10] mips: Rename CONFIG_CPU_CAVIUM_OCTEON to CONFIG_CPU_MIPS64_OCTEON   Stefan Roese
• [PATCH v1 06/10] mips: mipsregs.h: Add more register macros for Octeon port   Stefan Roese
• [PATCH v1 07/10] mips: mipsregs.h: Sync with linux v5.7.0-rc3 version   Stefan Roese
• [PATCH v1 08/10] sysreset: Add Octeon sysreset driver   Stefan Roese
• [PATCH v1 09/10] mips: octeon: dts: Add Octeon 3 cn73xx base dtsi file   Stefan Roese
• [PATCH v1 10/10] mips: octeon: Add minimal Octeon 3 EBB7304 EVK support   Stefan Roese
• [PATCH v3 1/4] imxrt1050-evk: README: change dd command destination   sbabic at denx.de
• [PATCH v3 2/4] imxrt1020-evk: README: change dd command destination   sbabic at denx.de
• [PATCH 3/5] Revert "imx: defconfig: Enable CONFIG_SPL_FORCE_MMC_BOOT"   sbabic at denx.de
• [PATCH 1/5] imx: spl: return boot mode for asked MMC device in spl_mmc_boot_mode()   sbabic at denx.de
• [PATCH v3 3/4] video: mxsfb: add clk_enable()   sbabic at denx.de
• [PATCH v3 4/4] clk: imx: clk-imxrt1050: fix lcdif clock gate   sbabic at denx.de
• [PATCH 4/5] imx: spl: Remove ifdefs in spl_mmc_boot_mode()   sbabic at denx.de
• [PATCH 2/5] Revert "imx: Introduce CONFIG_SPL_FORCE_MMC_BOOT to force MMC boot on falcon mode"   sbabic at denx.de
• [PATCH 5/5] imx: spl: Fix use of removed SPL_FAT_SUPPORT config   sbabic at denx.de
• [GIT PULL] Pull request: u-boot-imx u-boot-imx-20200502   Stefano Babic
• [PATCH v8 00/14] Add support for MediaTek xHCI host controller   Frank Wunderlich
• [PATCH v8 01/14] dm: core: Add function to get child count of ofnode or device   Frank Wunderlich
• [PATCH v8 02/14] test: dm: add test item for ofnode_get_child_count()   Frank Wunderlich
• [PATCH v8 03/14] phy: Add API for a bulk of phys   Frank Wunderlich
• [PATCH v8 04/14] test: dm: phy: add a test item for the phy_bulk API   Frank Wunderlich
• [PATCH v8 05/14] usb: dwc3: use the phy bulk API to get phys   Frank Wunderlich
• [PATCH v8 06/14] usb: dwc2_udc_otg: use the phy bulk API to get phys   Frank Wunderlich
• [PATCH v8 07/14] phy: phy-mtk-tphy: add support USB phys   Frank Wunderlich
• [PATCH v8 08/14] phy: phy-mtk-tphy: add support new version   Frank Wunderlich
• [PATCH v8 09/14] phy: phy-mtk-tphy: add a new reference clock   Frank Wunderlich
• [PATCH v8 10/14] xhci: mediatek: Add support for MTK xHCI host controller   Frank Wunderlich
• [PATCH v8 11/14] arm: dts: mt7629: add usb related nodes   Frank Wunderlich
• [PATCH v8 12/14] dt-bindings: phy-mtk-tphy: add properties of address mapping and clocks   Frank Wunderlich
• [PATCH v8 13/14] dt-bindings: usb: mtk-xhci: Add binding for MediaTek xHCI host controller   Frank Wunderlich
• [PATCH v8 14/14] MAINTAINERS: MediaTek: add USB related files   Frank Wunderlich
• [PATCH v7 00/22] RISC-V SiFive FU540 support SPL   Pragnesh Patel
• [PATCH v7 01/22] misc: add driver for the SiFive otp controller   Pragnesh Patel
• [PATCH v7 02/22] riscv: sifive: fu540: Use OTP DM driver for serial environment variable   Pragnesh Patel
• [PATCH v7 03/22] riscv: Add _image_binary_end for SPL   Pragnesh Patel
• [PATCH v7 04/22] lib: Makefile: build crc7.c when CONFIG_MMC_SPI   Pragnesh Patel
• [PATCH v7 05/22] riscv: sifive: dts: fu540: Add board -u-boot.dtsi files   Pragnesh Patel
• [PATCH v7 06/22] sifive: fu540: add ddr driver   Pragnesh Patel
• [PATCH v7 07/22] sifive: dts: fu540: Add DDR controller and phy register settings   Pragnesh Patel
• [PATCH v7 08/22] riscv: sifive: dts: fu540: add U-Boot dmc node   Pragnesh Patel
• [PATCH v7 09/22] clk: sifive: fu540-prci: Add clock enable and disable ops   Pragnesh Patel
• [PATCH v7 10/22] clk: sifive: fu540-prci: ddr and ethernet clock initialization in SPL   Pragnesh Patel
• [PATCH v7 11/22] riscv: dts: sifive: Sync hifive-unleashed-a00 dts from linux   Pragnesh Patel
• [PATCH v7 12/22] sifive: dts: fu540: Enable gpio in U-Boot SPL   Pragnesh Patel
• [PATCH v7 13/22] riscv: cpu: fu540: Add support for cpu fu540   Pragnesh Patel
• [PATCH v7 14/22] riscv: Add place-holder for driver compilation   Pragnesh Patel
• [PATCH v7 15/22] riscv: sifive: dts: fu540: Add clock for cpus node   Pragnesh Patel
• [PATCH v7 16/22] riscv: Enable cpu clock if it is present   Pragnesh Patel
• [PATCH v7 17/22] riscv: sifive: fu540: add SPL configuration   Pragnesh Patel
• [PATCH v7 18/22] configs: fu540: Add config options for U-Boot SPL   Pragnesh Patel
• [PATCH v7 19/22] sifive: dts: fu540: Enable L2 Cache in U-Boot   Pragnesh Patel
• [PATCH v7 20/22] riscv: sifive: fu540: enable all cache ways from U-Boot proper   Pragnesh Patel
• [PATCH v7 21/22] doc: sifive: fu540: Add description for OpenSBI generic platform   Pragnesh Patel
• [PATCH v7 22/22] doc: sifive: fu540: Add description for RISC-V FU540 U-Boot SPL   Pragnesh Patel
• [PATCH v7 04/22] lib: Makefile: build crc7.c when CONFIG_MMC_SPI   Heinrich Schuchardt
• [PATCH v8 00/14] Add support for MediaTek xHCI host controller   Marek Vasut
• [PATCH v7 04/22] lib: Makefile: build crc7.c when CONFIG_MMC_SPI   Bin Meng
• [PATCH] sunxi: add support for Banana Pi P2 Zero board   Maxime Ripard
• [PATCH v7 10/22] clk: sifive: fu540-prci: ddr and ethernet clock initialization in SPL   Bin Meng
• [PATCH v7 01/22] misc: add driver for the SiFive otp controller   Bin Meng
• [PATCH v7 02/22] riscv: sifive: fu540: Use OTP DM driver for serial environment variable   Bin Meng
• [PATCH v7 03/22] riscv: Add _image_binary_end for SPL   Bin Meng
• [PATCH v7 04/22] lib: Makefile: build crc7.c when CONFIG_MMC_SPI   Bin Meng
• [PATCH v7 06/22] sifive: fu540: add ddr driver   Bin Meng
• [PATCH v7 07/22] sifive: dts: fu540: Add DDR controller and phy register settings   Bin Meng
• [PATCH v7 08/22] riscv: sifive: dts: fu540: add U-Boot dmc node   Bin Meng
• [PATCH v7 09/22] clk: sifive: fu540-prci: Add clock enable and disable ops   Bin Meng
• [PATCH v7 13/22] riscv: cpu: fu540: Add support for cpu fu540   Bin Meng
• [PATCH 1/4] mach-sunxi: Refactor sunxi SPI-SPL   Benedikt-Alexander Mokroß
• [PATCH v7 14/22] riscv: Add place-holder for driver compilation   Bin Meng
• [PATCH v7 15/22] riscv: sifive: dts: fu540: Add clock for cpus node   Bin Meng
• [PATCH v7 16/22] riscv: Enable cpu clock if it is present   Bin Meng
• [PATCH v7 17/22] riscv: sifive: fu540: add SPL configuration   Bin Meng
• [PATCH v7 18/22] configs: fu540: Add config options for U-Boot SPL   Bin Meng
• [PATCH v7 20/22] riscv: sifive: fu540: enable all cache ways from U-Boot proper   Bin Meng
• [PATCH v7 21/22] doc: sifive: fu540: Add description for OpenSBI generic platform   Bin Meng
• [PATCH v7 22/22] doc: sifive: fu540: Add description for RISC-V FU540 U-Boot SPL   Bin Meng
• [PATCH v7 04/22] lib: Makefile: build crc7.c when CONFIG_MMC_SPI   Heinrich Schuchardt
• [PATCH v5 1/1] x86: Add a 64-bit 'coreboot64' build   Bin Meng
• [PATCH] Actions: S700 Calculate SDRAM size   Amit Singh Tomar
• [PATCH v5 1/1] x86: Add a 64-bit 'coreboot64' build   Heinrich Schuchardt
• [PATCH v5 1/1] x86: Add a 64-bit 'coreboot64' build   Bin Meng
• [PATCH v5 1/1] x86: Add a 64-bit 'coreboot64' build   Bin Meng
• [PATCH v5 1/1] x86: Add a 64-bit 'coreboot64' build   Heinrich Schuchardt
• [PATCH 1/1] cmd: efidebug: simplify UEFI protocol calls   Heinrich Schuchardt
• [PATCH 1/1] efi_loader: eliminate efi_get_(non)volatile_variable   Heinrich Schuchardt
• [PATCH v7 21/22] doc: sifive: fu540: Add description for OpenSBI generic platform   Pragnesh Patel
• [PATCH v7 20/22] riscv: sifive: fu540: enable all cache ways from U-Boot proper   Pragnesh Patel
• [PATCH v7 18/22] configs: fu540: Add config options for U-Boot SPL   Pragnesh Patel
• [PATCH v7 13/22] riscv: cpu: fu540: Add support for cpu fu540   Pragnesh Patel
• [PATCH v7 07/22] sifive: dts: fu540: Add DDR controller and phy register settings   Pragnesh Patel
• [PATCH v7 10/22] clk: sifive: fu540-prci: ddr and ethernet clock initialization in SPL   Pragnesh Patel
• [PATCH 2/2] net: pcnet: Switch to PCI memory access   Daniel Schwierzeck
• [PATCH 2/2] net: pcnet: Switch to PCI memory access   Daniel Schwierzeck
• [PATCH v7 21/22] doc: sifive: fu540: Add description for OpenSBI generic platform   Bin Meng
• [PATCH v7 21/22] doc: sifive: fu540: Add description for OpenSBI generic platform   Pragnesh Patel
• [PATCH v7 21/22] doc: sifive: fu540: Add description for OpenSBI generic platform   Bin Meng
• [PATCH v7 21/22] doc: sifive: fu540: Add description for OpenSBI generic platform   Pragnesh Patel
• [PATCH v7 04/22] lib: Makefile: build crc7.c when CONFIG_MMC_SPI   Jagan Teki
• [PATCH v7 01/22] misc: add driver for the SiFive otp controller   Jagan Teki
• [PATCH] clk: fix the console output of clk_register   Dario Binacchi
• [PATCH] video: omap: change include order   Dario Binacchi
• [PATCH v7 01/22] misc: add driver for the SiFive otp controller   Pragnesh Patel
• [PATCH] spi: fix dev parameter in dev_* calls   Dario Binacchi
• [PATCH v7 01/22] misc: add driver for the SiFive otp controller   Jagan Teki
• [PATCH 0/4] change the clk-mux get_rate helper   Dario Binacchi
• [PATCH 1/4] clk: ccf: mux: change include order   Dario Binacchi
• [PATCH 2/4] clk: ccf: mux: fix typo   Dario Binacchi
• [PATCH 3/4] clk: ccf: mux: fix access to the sandbox register   Dario Binacchi
• [PATCH 4/4] clk: ccf: mux: change the get_rate helper   Dario Binacchi
• [PATCH v7 06/22] sifive: fu540: add ddr driver   Jagan Teki
• [PATCH v7 10/22] clk: sifive: fu540-prci: ddr and ethernet clock initialization in SPL   Jagan Teki
• [PATCH v7 01/22] misc: add driver for the SiFive otp controller   Pragnesh Patel
• [PATCH v7 19/22] sifive: dts: fu540: Enable L2 Cache in U-Boot   Jagan Teki
• [PATCH v7 22/22] doc: sifive: fu540: Add description for RISC-V FU540 U-Boot SPL   Jagan Teki
• [PATCH v7 14/22] riscv: Add place-holder for driver compilation   Jagan Teki
• [PATCH v7 06/22] sifive: fu540: add ddr driver   Pragnesh Patel
• [PATCH v7 13/22] riscv: cpu: fu540: Add support for cpu fu540   Jagan Teki
• [PATCH v7 10/22] clk: sifive: fu540-prci: ddr and ethernet clock initialization in SPL   Pragnesh Patel
• [PATCH v7 19/22] sifive: dts: fu540: Enable L2 Cache in U-Boot   Pragnesh Patel
• [PATCH v7 10/22] clk: sifive: fu540-prci: ddr and ethernet clock initialization in SPL   Jagan Teki
• [PATCH v7 15/22] riscv: sifive: dts: fu540: Add clock for cpus node   Jagan Teki
• [PATCH v7 18/22] configs: fu540: Add config options for U-Boot SPL   Jagan Teki
• [PATCH v7 22/22] doc: sifive: fu540: Add description for RISC-V FU540 U-Boot SPL   Pragnesh Patel
• [PATCH v7 18/22] configs: fu540: Add config options for U-Boot SPL   Jagan Teki
• [PATCH v7 19/22] sifive: dts: fu540: Enable L2 Cache in U-Boot   Jagan Teki
• [PATCH v7 18/22] configs: fu540: Add config options for U-Boot SPL   Jagan Teki
• [PATCH v7 00/22] RISC-V SiFive FU540 support SPL   Jagan Teki
• [PATCH v7 16/22] riscv: Enable cpu clock if it is present   Sean Anderson
• [PATCH v3 0/8] A small set of arm cleanups   Trevor Woerner
• [PATCH v3 1/8] arm: lpc32xx: move SoC to mach-lpc32xx   Trevor Woerner
• [PATCH v3 2/8] arch/arm/Makefile: sort machine names   Trevor Woerner
• [PATCH v3 3/8] rename symbol: CONFIG_ORION5X -> CONFIG_ARCH_ORION5X   Trevor Woerner
• [PATCH v3 4/8] arm: orion5x: finish moving SoC to mach-orion5x   Trevor Woerner
• [PATCH v3 5/8] rename symbol: CONFIG_KIRKWOOD -> CONFIG_ARCH_KIRKWOOD   Trevor Woerner
• [PATCH v3 6/8] rename symbol: CONFIG_TEGRA -> CONFIG_ARCH_TEGRA   Trevor Woerner
• [PATCH v3 7/8] rename symbol: CONFIG_STM32 -> CONFIG_ARCH_STM32   Trevor Woerner
• [PATCH v3 8/8] drivers/reset/Kconfig: fix typo   Trevor Woerner
• [PATCH 1/8] x86: Add a new X86_RUN_64BIT_ONLY to Kconfig   Simon Glass
• [PATCH] clk: Fix clk func names in comments   Simon Glass
• [PATCH V2] mkimage: fit: Do not tail-pad fitImage with external data   Simon Glass
• [PATCH 1/2] patman: Sort the command line options   Simon Glass
• [PATCH 2/2] patman: Add an option to create patches without binary contents   Simon Glass
• [PATCH v3] cmd: mvebu: bubt: fix quoted string split across lines   Simon Glass
• [PATCH V2 3/9] test: cpu: test current cpu   Simon Glass
• [PATCH V2 1/9] uclass: cpu: Add new API to get udevice for current CPU   Simon Glass
• [PATCH V2 2/9] cpu: sandbox: support is_current   Simon Glass
• [PATCH V2 8/9] cpu: imx_cpu: Print the CPU temperature for iMX8QM A72   Simon Glass
• [PATCH 4/4] clk: ccf: mux: change the get_rate helper   Simon Glass
• [PATCH 5/5] sysreset: move print_resetinfo() to sysreset-uclass.c   Simon Glass
• [PATCH v9 18/21] riscv: Enable cpu clock if it is present   Sean Anderson
• [PATCH v9 00/21] riscv: Add Sipeed Maix support   Sean Anderson
• [PATCH v9 01/21] clk: Always use the supplied struct clk   Sean Anderson
• [PATCH v9 02/21] clk: Check that ops of composite clock components exist before calling   Sean Anderson
• [PATCH v9 03/21] clk: Unconditionally recursively en-/dis-able clocks   Sean Anderson
• [PATCH v9 04/21] clk: Fix clk_get_by_* handling of index   Sean Anderson
• [PATCH v9 05/21] clk: Add K210 pll support   Sean Anderson
• [PATCH v9 06/21] clk: Add a bypass clock for K210   Sean Anderson
• [PATCH v9 07/21] clk: Add K210 clock support   Sean Anderson
• [PATCH v9 08/21] dm: Add support for simple-pm-bus   Sean Anderson
• [PATCH v9 09/21] dm: Fix error handling for dev_read_addr_ptr   Sean Anderson
• [PATCH v9 10/21] reset: Add generic reset driver   Sean Anderson
• [PATCH v9 11/21] lib: Always set errno in hcreate_r   Sean Anderson
• [PATCH v9 12/21] riscv: Add headers for asm/global_data.h   Sean Anderson
• [PATCH v9 13/21] riscv: Clear pending interrupts before enabling IPIs   Sean Anderson
• [PATCH v9 14/21] riscv: Clean up IPI initialization code   Sean Anderson
• [PATCH v9 15/21] riscv: Add option to support RISC-V privileged spec 1.9   Sean Anderson
• [PATCH v9 16/21] riscv: Allow use of reset drivers   Sean Anderson
• [PATCH v9 17/21] riscv: Try to get cpu frequency from a "clocks" node if it exists   Sean Anderson
• [PATCH v9 18/21] riscv: Enable cpu clock if it is present   Sean Anderson
• [PATCH v9 19/21] riscv: Add device tree for K210 and Sipeed Maix BitM   Sean Anderson
• [PATCH v9 20/21] doc: riscv: Add documentation for Sipeed Maix Bit   Sean Anderson
• [PATCH v9 21/21] riscv: Add Sipeed Maix support   Sean Anderson
• [PATCH v9 00/21] riscv: Add Sipeed Maix support   Sean Anderson
• [PATCH v10 00/21] riscv: Add Sipeed Maix support   Sean Anderson
• [PATCH v10 01/21] clk: Always use the supplied struct clk   Sean Anderson
• [PATCH v10 02/21] clk: Check that ops of composite clock components exist before calling   Sean Anderson
• [PATCH v10 03/21] clk: Unconditionally recursively en-/dis-able clocks   Sean Anderson
• [PATCH v10 04/21] clk: Fix clk_get_by_* handling of index   Sean Anderson
• [PATCH v10 05/21] clk: Add K210 pll support   Sean Anderson
• [PATCH v10 06/21] clk: Add a bypass clock for K210   Sean Anderson
• [PATCH v10 07/21] clk: Add K210 clock support   Sean Anderson
• [PATCH v10 08/21] dm: Add support for simple-pm-bus   Sean Anderson
• [PATCH v10 09/21] dm: Fix error handling for dev_read_addr_ptr   Sean Anderson
• [PATCH v10 10/21] reset: Add generic reset driver   Sean Anderson
• [PATCH v10 11/21] lib: Always set errno in hcreate_r   Sean Anderson
• [PATCH v10 12/21] riscv: Add headers for asm/global_data.h   Sean Anderson
• [PATCH v10 13/21] riscv: Clear pending interrupts before enabling IPIs   Sean Anderson
• [PATCH v10 14/21] riscv: Clean up IPI initialization code   Sean Anderson
• [PATCH v10 15/21] riscv: Add option to support RISC-V privileged spec 1.9   Sean Anderson
• [PATCH v10 16/21] riscv: Allow use of reset drivers   Sean Anderson
• [PATCH v10 17/21] riscv: Try to get cpu frequency from a "clocks" node if it exists   Sean Anderson
• [PATCH v10 18/21] riscv: Enable cpu clock if it is present   Sean Anderson
• [PATCH v10 19/21] riscv: Add device tree for K210 and Sipeed Maix BitM   Sean Anderson
• [PATCH v10 20/21] doc: riscv: Add documentation for Sipeed Maix Bit   Sean Anderson
• [PATCH v10 21/21] riscv: Add Sipeed Maix support   Sean Anderson
• [PATCH v7 22/22] doc: sifive: fu540: Add description for RISC-V FU540 U-Boot SPL   Anup Patel
• [PATCH v7 21/22] doc: sifive: fu540: Add description for OpenSBI generic platform   Anup Patel
• [PATCH v7 22/22] doc: sifive: fu540: Add description for RISC-V FU540 U-Boot SPL   Pragnesh Patel
• [PATCH 0/3] net: tsec: Fix issues of DM driver   Zhiqiang Hou
• [PATCH 1/3] doc: dt-bindings: tsec: Correct the Ethernet port compatible string   Zhiqiang Hou
• [PATCH 2/3] net: tsec: Access eTSEC registers using virtual address   Zhiqiang Hou
• [PATCH 3/3] net: tsec: Access TBI PHY through the corresponding MII   Zhiqiang Hou
• [PATCH v8 00/14] Add support for MediaTek xHCI host controller   Frank Wunderlich
• [PATCH v7 16/22] riscv: Enable cpu clock if it is present   Pragnesh Patel
• [PATCH v7 00/22] RISC-V SiFive FU540 support SPL   Pragnesh Patel
• [PATCH v7 18/22] configs: fu540: Add config options for U-Boot SPL   Pragnesh Patel
• [PATCH v7 19/22] sifive: dts: fu540: Enable L2 Cache in U-Boot   Pragnesh Patel
• [PATCH v7 15/22] riscv: sifive: dts: fu540: Add clock for cpus node   Pragnesh Patel
• [PATCH v7 10/22] clk: sifive: fu540-prci: ddr and ethernet clock initialization in SPL   Pragnesh Patel
• [PATCH v7 13/22] riscv: cpu: fu540: Add support for cpu fu540   Pragnesh Patel
• [PATCH v7 14/22] riscv: Add place-holder for driver compilation   Pragnesh Patel
• [PATCH v7 04/22] lib: Makefile: build crc7.c when CONFIG_MMC_SPI   Pragnesh Patel
• [PATCH] image: Add support for ZSTD decompression   Robert Marko
• What is the right way to run fw_setenv for selecting different ECC or dtb files?   Jupiter
• [PATCH 1/3] doc: dt-bindings: tsec: Correct the Ethernet port compatible string   Vladimir Oltean
• [PATCH] rsa: fix alignment issue when getting public exponent   Heiko Stuebner
• libfdt issue - key verification fails with longer key-name   Heiko Stuebner
• [PATCH 3/3] net: tsec: Access TBI PHY through the corresponding MII   Vladimir Oltean
• [PATCH 2/3] net: tsec: Access eTSEC registers using virtual address   Vladimir Oltean
• [PATCH v8 00/14] Add support for MediaTek xHCI host controller   Marek Vasut
• [PATCH] rsa: fix alignment issue when getting public exponent   Philipp Tomsich
• [PATCH 1/4] clk: clk-imx8mm: Add flexspi clock and fix set parent   Peng Fan
• [PATCH 2/4] clk: clk-imx8mn: Update clock tree and support set parent   Peng Fan
• [PATCH 3/4] clk: imx8mm/8mn: Add USB clocks   Peng Fan
• [PATCH 4/4] clk: imx8mp: Update imx8mp ccf clock driver   Peng Fan
• [PATCH] pinctrl: nxp: scu: Check the pad partition before set pinmux   Peng Fan
• [PATCH] sf: Add Macronix MX25R6435F SPI NOR flash to flash parameters array   Peng Fan
• [PATCH] dm: serial: introduce puts hook   Peng Fan
• [PATCH V2] imx: Add support for i.MX8MM Beacon EmbeddedWorks devkit.   Adam Ford
• [PATCH V2 1/9] uclass: cpu: Add new API to get udevice for current CPU   Peng Fan
• [PATCH v2 8/8] rockchip: Enable PCIe/M.2 on rock960 board   Manivannan Sadhasivam
• [PATCH 1/3] doc: dt-bindings: tsec: Correct the Ethernet port compatible string   Z.q. Hou
• [PATCH 3/3] net: tsec: Access TBI PHY through the corresponding MII   Z.q. Hou
• [PATCH 2/3] net: tsec: Access eTSEC registers using virtual address   Z.q. Hou
• [PATCH V3 1/9] uclass: cpu: Add new API to get udevice for current CPU   Peng Fan
• [PATCH V3 2/9] cpu: sandbox: support is_current   Peng Fan
• [PATCH V3 3/9] test: cpu: test current cpu   Peng Fan
• [PATCH V3 4/9] common: board_f: Use cpu_get_current_dev in print_cpuinfo   Peng Fan
• [PATCH V3 5/9] cpu: imx8: reimplement get cpu count   Peng Fan
• [PATCH V3 6/9] cpu: imx8: support a72 as boot cpu   Peng Fan
• [PATCH V3 7/9] cpu: imx8: fix get core name and rate   Peng Fan
• [PATCH V3 8/9] cpu: imx_cpu: Print the CPU temperature for iMX8QM A72   Peng Fan
• [PATCH V3 9/9] cpu: imx8: show RevC instead of Rev? at boot log   Peng Fan
• [PATCH 3/3] net: tsec: Access TBI PHY through the corresponding MII   Vladimir Oltean
• [PATCH] video: omap: change include order   Lokesh Vutla
• [PATCH 5/5] power: imx8: Replace SC_R_LAST with SC_R_NONE   Anatolij Gustschin
• [PATCH 00/13] imx: tmu support and scu thermal update   Peng Fan
• [PATCH 01/13] thermal: imx_scu_thermal: Update driver for i.MX8QM thermal sensor   Peng Fan
• [PATCH 02/13] thermal: Add thermal driver for i.MX8M   Peng Fan
• [PATCH 03/13] thermal: imx_tmu: Add support for thermal sensor on iMX8MM   Peng Fan
• [PATCH 04/13] thermal: imx_tmu: support TMU arch level initialization   Peng Fan
• [PATCH 05/13] thermal: imx_tmu: Fix for temperature out of range   Peng Fan
• [PATCH 06/13] thermal: imx_tmu: Check the TEMP range for iMX8MM   Peng Fan
• [PATCH 07/13] thermal: imx_tmu: support i.MX8MP   Peng Fan
• [PATCH 08/13] imx8mm: Load fuse for TMU TCALIV and TASR   Peng Fan
• [PATCH 09/13] imx: i.MX8MN: Enable loading TASR and TCALIV from fuse   Peng Fan
• [PATCH 10/13] imx: load calibration parameters from fuse for i.MX8MP   Peng Fan
• [PATCH 11/13] imx8mp: Set default SNSR25C for TMU probe1   Peng Fan
• [PATCH 12/13] imx: regs: add more fuse bank structure   Peng Fan
• [PATCH 13/13] imx: cpu: support tmu   Peng Fan
• [PATCH 1/4] sata: ahsata: Fix resource leak   Peng Fan
• [PATCH 2/4] sata: ahsata: Fix wrong operand for checking SERR DIAG_X   Peng Fan
• [PATCH 3/4] sata: dwc_ahsata: Fix incorrect free   Peng Fan
• [PATCH 4/4] sata: dwc_ahsata: Fix memory issue in reset_sata   Peng Fan
• [PATCH 1/1] efi_loader: eliminate efi_set_(non)volatile_variable   Heinrich Schuchardt
• [PATCH 1/1] efi_loader: correct comments for efi_status_t   Heinrich Schuchardt
• [PATCH 1/2] misc: fuse: Update imx8 fuse driver for 8QM   Peng Fan
• [PATCH 2/2] misc: scu: Increase the timeout for MU communication   Peng Fan
• [PATCH 1/5] imx8: power: Add PD device lookup interface to power domain uclass   Peng Fan
• [PATCH 2/5] power: imx8-power-domain: Set DM_FLAG_DEFAULT_PD_CTRL_OFF flag   Peng Fan
• [PATCH 3/5] power: imx8: remove the resource owned check before power off   Peng Fan
• [PATCH 4/5] power: imx8: Check owned resource in power on   Peng Fan
• [PATCH 5/5] power: imx8: Replace SC_R_LAST with SC_R_NONE   Peng Fan
• [PATCH V2 1/8] net: eth-uclass: add return value check   Peng Fan
• [PATCH V2 2/8] net: Add eth phy generic driver for shared MDIO   Peng Fan
• [PATCH V2 3/8] net: Update eQos driver and FEC driver to use eth phy interfaces   Peng Fan
• [PATCH V2 4/8] net: phy: realtek: add rx delay support for RTL8211F   Peng Fan
• [PATCH V2 5/8] net: dwc_eth_qos: add dwc eqos for imx support   Peng Fan
• [PATCH V2 6/8] net: eqos: implement callbaks to get interface and set txclk rate   Peng Fan
• [PATCH V2 7/8] fec: Move imx_get_mac_from_fuse declare to imx file   Peng Fan
• [PATCH V2 8/8] eQos: Implement the read_rom_hwaddr callback   Peng Fan
• [PATCH 3/3] net: tsec: Access TBI PHY through the corresponding MII   Z.q. Hou
• [PATCHv2 0/3] net: tsec: Fix issues of DM driver   Zhiqiang Hou
• [PATCHv2 1/3] doc: dt-bindings: tsec: Correct the Ethernet port compatible string   Zhiqiang Hou
• [PATCHv2 2/3] net: tsec: Access eTSEC registers using virtual address   Zhiqiang Hou
• [PATCHv2 3/3] net: tsec: Access TBI PHY through the corresponding MII   Zhiqiang Hou
• [PATCH 2/2] net: pcnet: Switch to PCI memory access   Marek Vasut
• [PATCH V2] ARM: imx: pico-imx8mq: Add support for Technexion Pico-iMX8MQ   Stefano Babic
• [PATCH 10/13] imx: load calibration parameters from fuse for i.MX8MP   Fabio Estevam
• [PATCH V2 resend 1/4] imx: add module fuse support   Stefano Babic
• [PATCH] sh: Enable ffunction-sections and fdata-sections   Marek Vasut
• [PATCHv2 3/3] net: tsec: Access TBI PHY through the corresponding MII   Vladimir Oltean
• [PATCH v4 0/2] add brcm iproc gpio driver   Rayagonda Kokatanur
• [PATCH v4 1/2] drivers: gpio: add broadcom iproc gpio driver support   Rayagonda Kokatanur
• [PATCH v4 2/2] gpio: do not include <asm/arch/gpio.h> on TARGET_BCMNS3   Rayagonda Kokatanur
• [PATCH v7 16/22] riscv: Enable cpu clock if it is present   Sean Anderson
• [PATCH] net: pcnet: fix I/O primitives for memory access   Daniel Schwierzeck
• [RFC PATCH 0/3] DM_MDIO for fsl_tsec driver   Vladimir Oltean
• [RFC PATCH 1/3] phy: make phy_connect_fixed work with a null mdio bus   Vladimir Oltean
• [RFC PATCH 2/3] configs: enable DM_MDIO for LS1021A-TWR and LS1021A-TSN   Vladimir Oltean
• [RFC PATCH 3/3] net: tsec: convert fsl_pq_mdio to DM_MDIO   Vladimir Oltean
• [PATCH v2] video: omap: change include order   Dario Binacchi
• [PATCH 1/2] arm: mvebu: armada-370-xp.dtsi: add u-boot, dm-pre-reloc to spi0   Ezra Buehler
• [PATCH 0/2] Fix boot from SPI flash on Synology DS414   Ezra Buehler
• [PATCH 2/2] arm: mvebu: ds414: define CONFIG_SYS_U_BOOT_OFFS   Ezra Buehler
• Bisected: mmc cause reboot loops on N900   Pali Rohár
• [PATCH v3 0/4] patman: Add changelog customization options   Sean Anderson
• [PATCH v3 1/4] patman: Modify functional tests for new behavior   Sean Anderson
• [PATCH v3 2/4] patman: Suppress empty changelog entries   Sean Anderson
• [PATCH v3 3/4] patman: Add new tags for finer-grained changelog control   Sean Anderson
• [PATCH v3 4/4] patman: Support multi-line changes in changelogs   Sean Anderson
• [PATCH 5/5] power: imx8: Replace SC_R_LAST with SC_R_NONE   Peng Fan
• [PATCH 10/13] imx: load calibration parameters from fuse for i.MX8MP   Peng Fan
• [PATCH V2 resend 1/4] imx: add module fuse support   Peng Fan
• [PATCH v2 7/7] rockchip: make_fit_atf: add signature handling   Heiko Stübner
• [PATCH v2] arm: dts: uDPU: switch default PHY speed to 3.125Gbit   Stefan Roese
• [PATCH v7 16/22] riscv: Enable cpu clock if it is present   Pragnesh Patel
• [PATCH v7 04/22] lib: Makefile: build crc7.c when CONFIG_MMC_SPI   Pragnesh Patel
• [PATCH v3] cmd: mvebu: bubt: fix quoted string split across lines   Stefan Roese
• [PATCH] Actions: S700 Calculate SDRAM size   Manivannan Sadhasivam
• [PATCHv2 3/3] net: tsec: Access TBI PHY through the corresponding MII   Z.q. Hou
• [PATCH 0/2] fixes for basic espressobin support   Peter Vollmer
• [RFC PATCH 1/3] phy: make phy_connect_fixed work with a null mdio bus   Z.q. Hou
• [PATCH 1/2] arm64: armada-37xx: dts: sync armada-3720-espressobin.dts with u-boot-marvell   Peter Vollmer
• [PATCH 2/2] arm64: armada-37xx: espressobin: enable SD card and network   Peter Vollmer
• [RFC PATCH 3/3] net: tsec: convert fsl_pq_mdio to DM_MDIO   Z.q. Hou
• sd-card is not working on espressobin   Stefan Roese
• Please pull u-boot-marvell/master   Stefan Roese
• [PATCH v1 0/2] add broadcom spi driver   Rayagonda Kokatanur
• [PATCH v1 1/2] driver: spi: add brcm iproc qspi support.   Rayagonda Kokatanur
• [PATCH v1 2/2] drivers: spi: add commands for micron SPI   Rayagonda Kokatanur
• [PATCH v5 1/4] omap: mmc: Avoid using libfdt with of-platdata   Bartosz Golaszewski
• [PATCH v5 1/1] x86: Add a 64-bit 'coreboot64' build   Bin Meng
• [PATCH V3 1/9] uclass: cpu: Add new API to get udevice for current CPU   sbabic at denx.de
• [PATCH V3 3/9] test: cpu: test current cpu   sbabic at denx.de
• [PATCH 2/5] usb: gadget: sdp: use CONFIG_SDP_LOADADDR as default load address   sbabic at denx.de
• [PATCH V3 5/9] cpu: imx8: reimplement get cpu count   sbabic at denx.de
• [PATCH V3 4/9] common: board_f: Use cpu_get_current_dev in print_cpuinfo   sbabic at denx.de
• [PATCH 1/5] spl: sdp: call board_usb_init at spl_sdp_load_image   sbabic at denx.de
• [PATCH 5/5] spl: sdp: Add DM gadget support for sdp   sbabic at denx.de
• [PATCH V3 2/9] cpu: sandbox: support is_current   sbabic at denx.de
• [PATCH V3 6/9] cpu: imx8: support a72 as boot cpu   sbabic at denx.de
• [PATCH 4/5] spl: sdp: Add a callback to clean up USB driver   sbabic at denx.de
• [PATCH V3 9/9] cpu: imx8: show RevC instead of Rev? at boot log   sbabic at denx.de
• [PATCH 3/5] spl: sdp: Add CONFIG_SPL_SDP_USB_DEV for USB device   sbabic at denx.de
• [PATCH V3 8/9] cpu: imx_cpu: Print the CPU temperature for iMX8QM A72   sbabic at denx.de
• [PATCH V3 7/9] cpu: imx8: fix get core name and rate   sbabic at denx.de
• [PATCH v2] imx: support for conga-QMX8 board   Stefano Babic
• [PATCH v2 1/2] patman: Sort the command line options   Bin Meng
• [PATCH v2 2/2] patman: Add an option to create patches without binary contents   Bin Meng
• AW: sd-card is not working on espressobin   Moritz Berghof
• [PATCH 1/2] arm: mvebu: armada-370-xp.dtsi: add u-boot,dm-pre-reloc to spi0   Chris Packham
• [RFC PATCH 3/3] net: tsec: convert fsl_pq_mdio to DM_MDIO   Vladimir Oltean
• [PATCH v3 1/2] timer: mpc83xx_timer: fix build with CONFIG_{HW_,}WATCHDOG   Rasmus Villemoes
• [PATCH] spi: fsl_dspi: Introduce DT bindings for CS-to-SCK and SCK-to-CS delays   Vladimir Oltean
• [PATCH v2 0/3] Add reboot mode support   Nandor Han
• [PATCH v2 1/3] reboot-mode: add support for reboot mode control   Nandor Han
• [PATCH v2 2/3] reboot-mode: read the boot mode from GPIOs status   Nandor Han
• [PATCH v2 3/3] reboot-mode: read the boot mode from RTC memory   Nandor Han
• [PATCH] Actions: S700 Calculate SDRAM size   Amit Tomer
• Please pull u-boot-x86   Bin Meng
• [PATCH v3 1/5] net: phy: Add missing kernel doc to phy functions   Michal Simek
• [PATCH v3 2/5] net: phy: Fix kernel doc issues in phy.h   Michal Simek
• [PATCH v3 3/5] net: phy: Add helper routines to set and clear bits   Michal Simek
• [PATCH v3 4/5] net: phy: Add support for TI PHY init   Michal Simek
• What is the right way to run fw_setenv for selecting different ECC or dtb files?   Jupiter
• [PATCH] driver: net: fm: minor fix in DM ETH support   Madalin Bucur
• [PATCH] MAINTAINERS: add QorIQ DPAA   Madalin Bucur
• [PATCH 1/1] test: stabilize test_efi_secboot   Heinrich Schuchardt
• [PATCH] cache: l2x0: Fix missing write to Auxiliary Control Register   Ley Foon Tan
• [PULL] u-boot-sh/next network cleanup part 1   Tom Rini
• [PATCH V2] mkimage: fit: Do not tail-pad fitImage with external data   Tom Rini
• [PULL] u-boot-sh/next network cleanup part 1   Marek Vasut
• [PATCH v2 00/16] add initial support for broadcom NS3 soc   Rayagonda Kokatanur
• [PATCH v2 01/16] board: ns3: add support for Broadcom Northstar 3   Rayagonda Kokatanur
• [PATCH v2 02/16] arm: cpu: armv8: add L3 memory flush support   Rayagonda Kokatanur
• [PATCH v2 03/16] configs: ns3: enable clock subsystem   Rayagonda Kokatanur
• [PATCH v2 04/16] arm: dts: ns3: add clock dt node   Rayagonda Kokatanur
• [PATCH v2 05/16] dt-bindings: memory: ns3: add memory definitions   Rayagonda Kokatanur
• [PATCH v2 06/16] board: ns3: add api to save boot parameters passed from BL31   Rayagonda Kokatanur
• [PATCH v2 07/16] board: ns3: default reset type to L3   Rayagonda Kokatanur
• [PATCH v2 08/16] dt-bindings: memory: ns3: update GIC LPI address   Rayagonda Kokatanur
• [PATCH v2 09/16] board: ns3: program GIC LPI tables   Rayagonda Kokatanur
• [PATCH v2 10/16] configs: ns3: enable GIC ITS LPI table programing   Rayagonda Kokatanur
• [PATCH v2 11/16] dt-bindings: memory: ns3: add ddr memory definition   Rayagonda Kokatanur
• [PATCH v2 12/16] board: ns3: define ddr memory layout   Rayagonda Kokatanur
• [PATCH v2 13/16] board: ns3: limit U-boot relocation within 16MB memory   Rayagonda Kokatanur
• [PATCH v2 14/16] include/configs: ns3: add env variables for Linux boot   Rayagonda Kokatanur
• [PATCH v2 15/16] include/configs: ns3: add support for flashing images   Rayagonda Kokatanur
• [PATCH v2 16/16] MAINTAINERS: update maintainers for broadcom ns3 platform   Rayagonda Kokatanur
• [PATCH] drivers: net: fsl-mc: fixup msi-map property   Laurentiu Tudor
• [PATCH] cmd: mem: Remove CONFIG_SYS_MEMTEST_SCRATCH mapping   Michal Simek
• [PATCH] drivers: crypto: mod_exp_sw: Re-add DM_FLAG_PRE_RELOC   Jan Kiszka
• [PATCH 0/4] Various build dependency fixes   Jan Kiszka
• [PATCH 1/4] kbuild: efi: Avoid rebuilding efi targets   Jan Kiszka
• [PATCH 2/4] kbuild: spl: Fix parallel build   Jan Kiszka
• [PATCH 3/4] kbuild: spl: Add shrunk arch-dtbs to targets list   Jan Kiszka
• [PATCH 4/4] kbuild: arm: Fix duplicate builds of dtbs   Jan Kiszka
• [PATCH 10/13] imx: load calibration parameters from fuse for i.MX8MP   Fabio Estevam
• [PATCH v2 00/10] USB host support for Raspberry Pi 4 board   Sylwester Nawrocki
• [PATCH v2 01/10] usb: xhci: Add missing cache flush in the scratchpad array initialization   Sylwester Nawrocki
• [PATCH v2 02/10] usb: xhci: Use only 32-bit accesses in xhci_writeq/xhci_readq   Sylwester Nawrocki
• [PATCH v2 03/10] pci: Move some PCIe register offset definitions to a common header   Sylwester Nawrocki
• [PATCH v2 04/10] rpi4: shorten a mapping for the DRAM   Sylwester Nawrocki
• [PATCH v2 05/10] rpi4: add a mapping for the PCIe XHCI controller MMIO registers (ARM 64bit)   Sylwester Nawrocki
• [PATCH v2 06/10] rpi4: add a mapping for the PCIe XHCI controller MMIO registers (ARM 32bit)   Sylwester Nawrocki
• [PATCH v2 07/10] linux/bitfield.h: Add primitives for manipulating bitfields both in host- and fixed-endian   Sylwester Nawrocki
• [PATCH v2 08/10] pci: Add some PCI Express capability register offset definitions   Sylwester Nawrocki
• [PATCH v2 09/10] pci: Add driver for Broadcom STB PCIe controller   Sylwester Nawrocki
• [PATCH v2 10/10] config: Enable support for the XHCI controller on RPI4 board   Sylwester Nawrocki
• [PATCH V2 1/9] uclass: cpu: Add new API to get udevice for current CPU   Simon Glass
• [RFC PATCH 1/2] arch: x86: apl: Only load VBT if CONFIG_HAVE_VBT is enabled   Simon Glass
• [RFC PATCH 2/2] arch: x86: apl: Use devicetree for FSP configuration   Simon Glass
• [PATCH V2 1/9] uclass: cpu: Add new API to get udevice for current CPU   Peng Fan
• [PATCH] image: Add support for ZSTD decompression   Tom Rini
• [PATCH v5 1/4] omap: mmc: Avoid using libfdt with of-platdata   Simon Glass
• [PATCH V2 1/6] dt-bindings: imx_rsrc: add SC_R_NONE   Peng Fan
• [PATCH V2 2/6] imx8: power: Add PD device lookup interface to power domain uclass   Peng Fan
• [PATCH V2 3/6] power: imx8-power-domain: Set DM_FLAG_DEFAULT_PD_CTRL_OFF flag   Peng Fan
• [PATCH V2 4/6] power: imx8: remove the resource owned check before power off   Peng Fan
• [PATCH V2 5/6] power: imx8: Check owned resource in power on   Peng Fan
• [PATCH V2 6/6] imx8: Replace SC_R_LAST with SC_R_NONE in DTB   Peng Fan
• Pull request: u-boot-rockchip-20200501   Tom Rini
• [PATCH] net: pcnet: fix I/O primitives for memory access   Tom Rini
• [PATCH 0/3] Move memtest configurations to Kconfig   Michal Simek
• [PATCH 1/3] treewide: mem: Remove alternate memtest setup from Mox and x530   Michal Simek
• [PATCH 2/3] treewide: mem: Enable MEMTEST via defconfig   Michal Simek
• [PATCH 3/3] treewide: mem: Move mtest related defines to Kconfig   Michal Simek
• ReadTheDocs integration   Tom Rini
• [PATCH] arm: versal: Fix xspi0 boot mode   Michal Simek
• [PATCH] mmc: zynq_sdhci: Remove global pointer   Michal Simek
• [PATCH 00/14] mtd: nand: i.MX update   Peng Fan
• [PATCH 01/14] mtd: gpmi: change the BCH layout setting for large oob NAND   Peng Fan
• [PATCH 02/14] mtd: gpmi: provide the option to use legacy bch geometry   Peng Fan
• [PATCH 03/14] nand: mxs: fix the bitflips for erased page when uncorrectable error   Peng Fan
• [PATCH 04/14] nand: mxs: correct bitflip for erased NAND page   Peng Fan
• [PATCH 05/14] mxs_nand: Add support for i.MX8M   Peng Fan
• [PATCH 06/14] nand: Update SPL MXS NAND mini driver   Peng Fan
• [PATCH 07/14] mxs_nand: Update compatible string for i.MX6SX   Peng Fan
• [PATCH 08/14] mtd: nand: mxs_nand: add i.MX6QP compatible string   Peng Fan
• [PATCH 09/14] mtd: mxs_nand: fix the gf_13/14 definition issue   Peng Fan
• [PATCH 10/14] nand: mxs_nand: make imx8mm can use hardware BCH and randomizer   Peng Fan
• [PATCH 11/14] mtd: nand: support GPMI NAND driver for i.MX8   Peng Fan
• [PATCH 12/14] MXS_NAND: Add clock support for iMX8   Peng Fan
• [PATCH 13/14] mxs_nand: don't check zero count when ECC reading with randomizer   Peng Fan
• [PATCH 14/14] nand: enable the Randomizer module for i.mx7 and i.mx8   Peng Fan
• [PATCH] cmd: mem: Remove CONFIG_SYS_MEMTEST_SCRATCH mapping   Simon Glass
• [PATCH v2 2/2] patman: Add an option to create patches without binary contents   Simon Glass
• [PATCH 1/4] sata: ahsata: Fix resource leak   Simon Glass
• [PATCH 2/4] sata: ahsata: Fix wrong operand for checking SERR DIAG_X   Simon Glass
• [PATCH 3/4] sata: dwc_ahsata: Fix incorrect free   Simon Glass
• [PATCH] rsa: fix alignment issue when getting public exponent   Simon Glass
• [PATCH] dm: serial: introduce puts hook   Simon Glass
• [PATCH v4 1/2] drivers: gpio: add broadcom iproc gpio driver support   Simon Glass
• [PATCH v3 1/4] patman: Modify functional tests for new behavior   Simon Glass
• [PATCH] dm: serial: introduce puts hook   Peng Fan
• [PATCH v2] imx: support for conga-QMX8 board   Oliver Graute
• [PATCH 6/8] ARM: imx8m: Fix reset in SPL on NXP iMX8MP EVK   Fabio Estevam
• [PATCH 1/4] sata: ahsata: Fix resource leak   Peng Fan
• [PATCH 6/8] ARM: imx8m: Fix reset in SPL on NXP iMX8MP EVK   Marek Vasut
• [PATCH v3 4/4] patman: Support multi-line changes in changelogs   Simon Glass
• [PATCH v3 2/4] patman: Suppress empty changelog entries   Simon Glass
• [PATCH v3 3/4] patman: Add new tags for finer-grained changelog control   Simon Glass
• [PATCH] cmd: mem: Remove CONFIG_SYS_MEMTEST_SCRATCH mapping   Stefan Roese
• [PATCH 6/8] ARM: imx8m: Fix reset in SPL on NXP iMX8MP EVK   Harald Seiler
• [PATCH v2 1/2] arm: dts: bcm283x: Allow UARTs to work before relocation   Matthias Brugger
• [PATCH v2 2/2] arm: bcm283x: serial: Move ofdata reading to probe() method   Matthias Brugger
• [PATCH 6/8] ARM: imx8m: Fix reset in SPL on NXP iMX8MP EVK   Fabio Estevam
• [PATCH] dm: serial: introduce puts hook   Simon Glass
• [PATCH 6/8] ARM: imx8m: Fix reset in SPL on NXP iMX8MP EVK   Harald Seiler
• [PATCH 6/8] ARM: imx8m: Fix reset in SPL on NXP iMX8MP EVK   Fabio Estevam
• [PATCH] rsa: fix alignment issue when getting public exponent   Heiko Stübner
• [PATCH v7 18/22] configs: fu540: Add config options for U-Boot SPL   Pragnesh Patel
• [PATCH v5 0/2] add brcm iproc gpio driver   Rayagonda Kokatanur
• [PATCH v5 1/2] drivers: gpio: add broadcom iproc gpio driver support   Rayagonda Kokatanur
• [PATCH v5 2/2] gpio: do not include <asm/arch/gpio.h> on TARGET_BCMNS3   Rayagonda Kokatanur
• [PATCH v8 00/14] Add support for MediaTek xHCI host controller   Frank Wunderlich
• [PATCH v3 4/5] net: phy: Add support for TI PHY init   Dan Murphy
• [PATCH v3 2/4] patman: Suppress empty changelog entries   Sean Anderson
• [PATCH] rsa: fix alignment issue when getting public exponent   Simon Glass
• [PATCH v8 00/14] Add support for MediaTek xHCI host controller   Tom Rini
• [GIT PULL] Pull request: u-boot-imx u-boot-imx-20200502   Tom Rini
• Please pull u-boot-marvell/master   Tom Rini
• Please pull u-boot-x86   Tom Rini
• [PATCH] clk: Fix clk func names in comments   Jagan Teki
• [PATCH 1/2] arm: mvebu: armada-370-xp.dtsi: add u-boot,dm-pre-reloc to spi0   Ezra Buehler
• [PATCH 1/4] kbuild: efi: Avoid rebuilding efi targets   Heinrich Schuchardt
• [PATCH v3 2/4] patman: Suppress empty changelog entries   Simon Glass
• [PATCH v5 1/2] drivers: gpio: add broadcom iproc gpio driver support   Simon Glass
• [PATCH v4 0/4] patman: Add changelog customization options   Sean Anderson
• [PATCH v4 1/4] patman: Suppress empty changelog entries   Sean Anderson
• [PATCH v4 2/4] patman: Add new tags for finer-grained changelog control   Sean Anderson
• [PATCH v4 3/4] patman: Support multi-line changes in changelogs   Sean Anderson
• [PATCH v4 4/4] patman: Modify functional tests for new behavior   Sean Anderson
• [PATCH v4 0/5] TI Ethernet PHY changes   Dan Murphy
• [PATCH v4 1/5] net: phy: Add missing kernel doc to phy functions   Dan Murphy
• [PATCH v4 2/5] net: phy: Fix kernel doc issues in phy.h   Dan Murphy
• [PATCH v4 3/5] net: phy: Add helper routines to set and clear bits   Dan Murphy
• [PATCH v4 4/5] net: phy: Add support for TI PHY init   Dan Murphy
• [PATCH v4 5/5] net: phy: Add DP8382x phy registration to TI PHY init   Dan Murphy
• [PATCH 0/6] rtc: add rtc_{read,write}8_array and rtc command   Rasmus Villemoes
• [PATCH 1/6] rtc: add rtc_read8_array helper and ->read8_array method   Rasmus Villemoes
• [PATCH 2/6] rtc: add rtc_write8_array() helper   Rasmus Villemoes
• [PATCH 3/6] rtc: fall back to ->{read, write}8_array if ->{read, write}8 are not provided   Rasmus Villemoes
• [PATCH 4/6] rtc: pcf2127: provide ->read8_array method   Rasmus Villemoes
• [PATCH 5/6] rtc: pcf2127: provide ->write8_array method   Rasmus Villemoes
• [PATCH 6/6] rtc: add rtc command   Rasmus Villemoes
• [U-Boot] [PATCH v2 13/18] autoboot: Tidy up use of menukey   Da Xue
• [U-Boot] [PATCH v2 13/18] autoboot: Tidy up use of menukey   Da Xue
• [PATCH] mpc83xx: remove redundant MPC83xx_RESET #define   Rasmus Villemoes
• [PATCH 00/36] Tidy up the 'bd' command.   Simon Glass
• [PATCH 01/36] bdinfo: nds32: Use generic bd_info   Simon Glass
• [PATCH 02/36] bdinfo: riscv: Use generic bd_info   Simon Glass
• [PATCH 03/36] bdinfo: m68k: Drop bd_info->bi_ipbfreq   Simon Glass
• [PATCH 04/36] bdinfo: xtensa: Create a generic do_bdinfo for xtensa   Simon Glass
• [PATCH 05/36] bdinfo: mips: Use the generic bd command   Simon Glass
• [PATCH 06/36] bdinfo: nios2: Use the generic bd command   Simon Glass
• [PATCH 07/36] bdinfo: microblaze: Use the generic bd command   Simon Glass
• [PATCH 08/36] bdinfo: sh: Use the generic bd command   Simon Glass
• [PATCH 09/36] bdinfo: x86: Use the generic bd command   Simon Glass
• [PATCH 10/36] bdinfo: sandbox: Use the generic bd command   Simon Glass
• [PATCH 11/36] bdinfo: nds32: Use the generic bd command   Simon Glass
• [PATCH 12/36] bdinfo: riscv: Use the generic bd command   Simon Glass
• [PATCH 13/36] bdinfo: arm: Use the generic bd command   Simon Glass
• [PATCH 14/36] bdinfo: Drop the option to not use the generic 'bd' command   Simon Glass
• [PATCH 15/36] bdinfo: Drop unused __maybe_unused   Simon Glass
• [PATCH 16/36] bdinfo: microblaze: sh: nios2: Drop arch-specific flash info   Simon Glass
• [PATCH 17/36] bdinfo: Drop unnecessary inline on functions   Simon Glass
• [PATCH 18/36] bdinfo: Drop print_std_bdinfo()   Simon Glass
• [PATCH 19/36] bdinfo: ppc: Drop arch-specific print_baudrate()   Simon Glass
• [PATCH 20/36] bdinfo: sh: arc: Drop arch-specific print_bi_mem()   Simon Glass
• [PATCH 21/36] bdinfo: Drop print_bi_boot_params()   Simon Glass
• [PATCH 22/36] bdinfo: Drop print_bi_flash()   Simon Glass
• [PATCH 23/36] bdinfo: Drop print_cpu_word_size()   Simon Glass
• [PATCH 24/36] bdinfo: net: ppc: Drop bi_enet1addr and other similar info   Simon Glass
• [PATCH 25/36] bdinfo: net: ppc: Drop prints for CONFIG_HAS_ETHn   Simon Glass
• [PATCH 26/36] bdinfo: net: Drop legacy ethernet bdinfo   Simon Glass
• [PATCH 27/36] bdinfo: net: Inline print_eths()   Simon Glass
• [PATCH 28/36] bdinfo: net: Inline print_eth_ip_addr()   Simon Glass
• [PATCH 29/36] bdinfo: Export some basic printing functions   Simon Glass
• [PATCH 30/36] bdinfo: arm: Move ARM-specific info into its own file   Simon Glass
• [PATCH 31/36] bdinfo: ppc: Move PPC-specific info into its own file   Simon Glass
• [PATCH 32/36] bdinfo: m68k: Move m68k-specific info into its own file   Simon Glass
• [PATCH 33/36] bdinfo: m68k: ppc: Move arch-specific code from bdinfo   Simon Glass
• [PATCH 34/36] bdinfo: Update the file comments   Simon Glass
• [PATCH 35/36] bdinfo: dm: Update fb_base when using driver model   Simon Glass
• [PATCH 36/36] bdinfo: x86: vesa: Update fb_base to the correct value   Simon Glass
• [PATCH 01/36] bdinfo: nds32: Use generic bd_info   Rick Chen
• [PATCH 02/36] bdinfo: riscv: Use generic bd_info   Rick Chen
• [PATCH 11/36] bdinfo: nds32: Use the generic bd command   Rick Chen
• [PATCH 12/36] bdinfo: riscv: Use the generic bd command   Rick Chen
• [PATCH v10 14/21] riscv: Clean up IPI initialization code   Rick Chen
• [PATCH 10/13] imx: load calibration parameters from fuse for i.MX8MP   Peng Fan
• [PATCH v5 1/2] drivers: gpio: add broadcom iproc gpio driver support   Rayagonda Kokatanur
• [PATCH 1/2] arm: mvebu: armada-370-xp.dtsi: add u-boot,dm-pre-reloc to spi0   Stefan Roese
• [PATCH v5 1/4] omap: mmc: Avoid using libfdt with of-platdata   Faiz Abbas
• [PATCH 1/2] arm: mvebu: armada-370-xp.dtsi: add u-boot,dm-pre-reloc to spi0   Ezra Buehler
• [PATCH 0/4] QSPI bugfixes of NXP layerscape platforms   Kuldeep Singh
• [PATCH 1/4] configs: ls1012a: Increase CONFIG_SYS_MALLOC_LEN size   Kuldeep Singh
• [PATCH 2/4] configs: ls1012a: Reduce CONFIG_ENV_SIZE to 0x2000   Kuldeep Singh
• [PATCH 3/4] configs: nxp: Enable CONFIG_SYS_RELOC_GD_ENV_ADDR   Kuldeep Singh
• [PATCH 4/4] configs: ls1012a: Unset ENV_ADDR value   Kuldeep Singh
• [PATCH v3 00/17] mtd: spi-nor-core: add xSPI Octal DTR support   Vignesh Raghavendra
• Calling i2c set speed twice for i2c_mux_bus   Michal Simek
• pull request of u-boot-mpc85xx for v2020.07   Priyanka Jain
• [PATCH v2 0/2] gpio: add gpio open-drain & open-source emulation   Neil Armstrong
• [PATCH v2 1/2] gpio: emulate open drain & open source in dm_gpio_set_value()   Neil Armstrong
• [PATCH v2 2/2] test: dm: update test for open-drain/open-source emulation in gpio-uclass   Neil Armstrong
• [PATCH 6/8] ARM: imx8m: Fix reset in SPL on NXP iMX8MP EVK   Harald Seiler
• [PATCH 1/2] arm: mvebu: armada-370-xp.dtsi: add u-boot,dm-pre-reloc to spi0   Stefan Roese
• [PATCH v10 20/21] doc: riscv: Add documentation for Sipeed Maix Bit   Rick Chen
• [RFC PATCH 3/3] net: tsec: convert fsl_pq_mdio to DM_MDIO   Madalin Bucur (OSS)
• Fwd: Re: ZynqMP boot: no messages from SPL other than "Debug uart enabled"   Major A
• [PATCH] configs: rpi_arm64: sync env size with rpi_{3,4}_defconfig   Marek Szyprowski
• Pull request for UEFI sub-system for efi-2020-07-rc2 (2)   Heinrich Schuchardt
• [PATCH 6/8] ARM: imx8m: Fix reset in SPL on NXP iMX8MP EVK   Marek Vasut
• [PATCH v2 07/10] linux/bitfield.h: Add primitives for manipulating bitfields both in host- and fixed-endian   Bin Meng
• [PATCH v2 10/10] config: Enable support for the XHCI controller on RPI4 board   Bin Meng
• [PATCH 3/8] qemu: arm64: Add support for efi firmware management protocol routines   Grant Likely
• [PATCH v2 10/10] config: Enable support for the XHCI controller on RPI4 board   Nicolas Saenz Julienne
• [PATCH v2 10/10] config: Enable support for the XHCI controller on RPI4 board   Marek Szyprowski
• [PATCH 00/13] powerpc: covert p1010, p1020 and p2020 RDB board   Zhiqiang Hou
• [PATCH 01/13] net: fsl_pq_mdio: Add the compatible "fsl, gianfar-mdio" support   Zhiqiang Hou
• [PATCH 02/13] net: tsec: Add the compatible string "gianfar" support   Zhiqiang Hou
• [PATCH 03/13] powerpc: mpc8xxx: Don't compile cpu_eth_init() when DM_ETH enabled   Zhiqiang Hou
• [PATCH 04/13] fsl: p1_p2_rdb: Move vsc7835 firmware uploading to board_early_init_r()   Zhiqiang Hou
• [PATCH 05/13] configs: p1_p2_rdb: Add the default address of vsc7385 firmware   Zhiqiang Hou
• [PATCH 06/13] dts: powerpc: p1020rdb: Add eTSEC DT nodes   Zhiqiang Hou
• [PATCH 07/13] powerpc: p1_p2_rdb: Don't compile board_eth_init() when DM_ETH enabled   Zhiqiang Hou
• [PATCH 08/13] configs: P1020RDB: Enable DM_ETH config   Zhiqiang Hou
• [PATCH 09/13] dts: powerpc: p1010rdb: Add eTSEC DT nodes   Zhiqiang Hou
• [PATCH 10/13] powerpc: p1010rdb: Compile legacy ethernet init function when no DM_ETH   Zhiqiang Hou
• [PATCH 11/13] configs: P1010RDB: Enable DM_ETH config   Zhiqiang Hou
• [PATCH 12/13] dts: powerpc: p2020rdb: Add eTSEC DT nodes   Zhiqiang Hou
• [PATCH 13/13] configs: P2020RDB: Enable DM_ETH config   Zhiqiang Hou
• [PATCH] cmd: gpt: add eMMC and GPT support   Rayagonda Kokatanur
• [PATCH v2 2/2] usb: xhci: Load Raspberry Pi 4 VL805's firmware   Matthias Brugger
• [PATCH] cmd: gpt: add eMMC and GPT support   Rayagonda Kokatanur
• [PATCH v1 1/1] cmd: gpt: add eMMC and GPT support   Rayagonda Kokatanur
• [PATCH] imx: Kconfig: enable IMX_BOOTAUX for i.MX8M   Peng Fan
• [PATCH 00/10] imx: imx8qm/qxp update   Peng Fan
• [PATCH 01/10] imx: imx8qm/qxp: reserving DDR memory for M4   Peng Fan
• [PATCH 02/10] imx: imx8qm/qxp: Fix issue in get_effective_memsize   Peng Fan
• [PATCH 03/10] imx: imx8qm/qxp: add get_board_serial   Peng Fan
• [PATCH 04/10] imx: imx8qm/imx8qxp: Power down the resources before SPL jump to u-boot   Peng Fan
• [PATCH 05/10] imx: imx8qm/qxp: Recover SPL data section for partition reboot   Peng Fan
• [PATCH 06/10] imx8: Select boot device dynamically   Peng Fan
• [PATCH 07/10] imx: imx8qm/qxp: check whether m4 partition booted   Peng Fan
• [PATCH 08/10] imx: imx8qm: update fdt_file according to m4 state   Peng Fan
• [PATCH 09/10] imx: imx8qxp: update fdt_file according to m4 state   Peng Fan
• [PATCH 10/10] imx8: cpu: check resource owned after sid fail   Peng Fan
• [PATCH v2 2/2] usb: xhci: Load Raspberry Pi 4 VL805's firmware   Peter Robinson
• [PATCH v2 2/2] usb: xhci: Load Raspberry Pi 4 VL805's firmware   Nicolas Saenz Julienne
• [RFC] arm: dts: imx: imx8qm: usb support   Oliver Graute
• [RFC] arm: dts: imx: imx8qm: usb support   Peng Fan
• [PATCH V2] mkimage: fit: Do not tail-pad fitImage with external data   Alex Kiernan
• [PATCH V2] mkimage: fit: Do not tail-pad fitImage with external data   Marek Vasut
• [PATCH v2 2/2] usb: xhci: Load Raspberry Pi 4 VL805's firmware   Matthias Brugger
• [PATCH v2 2/2] usb: xhci: Load Raspberry Pi 4 VL805's firmware   Nicolas Saenz Julienne
• [PATCH v2 05/10] rpi4: add a mapping for the PCIe XHCI controller MMIO registers (ARM 64bit)   Matthias Brugger
• [PATCH 0/6] imx: nandbcb update   Peng Fan
• [PATCH 1/6] nandbcb: fix the issue cannot support gf_14 NAND boot   Peng Fan
• [PATCH 2/6] nandbcb: support i.MX8M   Peng Fan
• [PATCH 3/6] nandbcb: add nandbcb dump command for i.MX8MM   Peng Fan
• [PATCH 4/6] nandbcb: add nandbcb dump command for i.MX6   Peng Fan
• [PATCH 5/6] cmd: nandbcb: Reconstruct the nandbcb tool for all platforms   Peng Fan
• [PATCH 6/6] nandbcb: read boot search count from fuse for imx8qxp   Peng Fan
• [PATCH v2 05/10] rpi4: add a mapping for the PCIe XHCI controller MMIO registers (ARM 64bit)   Matthias Brugger
• [PATCH v2 00/10] USB host support for Raspberry Pi 4 board   Nicolas Saenz Julienne
• [PATCH v2 05/10] rpi4: add a mapping for the PCIe XHCI controller MMIO registers (ARM 64bit)   Marek Szyprowski
• [PATCH v2 05/10] rpi4: add a mapping for the PCIe XHCI controller MMIO registers (ARM 64bit)   Matthias Brugger
• [PATCH v2 09/10] pci: Add driver for Broadcom STB PCIe controller   Nicolas Saenz Julienne
• [PULL] u-boot-usb/master   Marek Vasut
• [PATCH v2 06/10] rpi4: add a mapping for the PCIe XHCI controller MMIO registers (ARM 32bit)   Matthias Brugger
• [PATCH v2 06/10] rpi4: add a mapping for the PCIe XHCI controller MMIO registers (ARM 32bit)   Marek Szyprowski
• [PATCH] config: Enable USB Keyboard support on RPi4   Nicolas Saenz Julienne
• [PATCH v2 2/2] usb: xhci: Load Raspberry Pi 4 VL805's firmware   Matthias Brugger
• [PATCH v2 2/2] usb: xhci: Load Raspberry Pi 4 VL805's firmware   Nicolas Saenz Julienne
• [PATCH] config: Enable USB Keyboard support on RPi4   Sylwester Nawrocki
• [PATCH v2 09/10] pci: Add driver for Broadcom STB PCIe controller   Nicolas Saenz Julienne
• [PATCH v7 04/22] lib: Makefile: build crc7.c when CONFIG_MMC_SPI   Pragnesh Patel
• [PATCH v5 1/2] drivers: gpio: add broadcom iproc gpio driver support   Simon Glass
• [PATCH v5 1/2] drivers: gpio: add broadcom iproc gpio driver support   Simon Glass
• [PATCH] cmd: gpt: add eMMC and GPT support   Simon Glass
• [PATCH] cmd: gpt: add eMMC and GPT support   Simon Glass
• [PATCH v5 1/4] omap: mmc: Avoid using libfdt with of-platdata   Bartosz Golaszewski
• [PATCH v3 0/2] usb: xhci: Load Raspberry Pi 4 VL805's firmware   Nicolas Saenz Julienne
• [PATCH v3 1/2] arm: rpi: Add function to trigger VL805's firmware load   Nicolas Saenz Julienne
• [PATCH v3 2/2] usb: xhci: Load Raspberry Pi 4 VL805's firmware   Nicolas Saenz Julienne
• pull request of u-boot-mpc85xx for v2020.07   Tom Rini
• [PATCH V2] mkimage: fit: Do not tail-pad fitImage with external data   Alex Kiernan
• [PATCH V2] mkimage: fit: Do not tail-pad fitImage with external data   Marek Vasut
• [PATCH] cmd: gpt: add eMMC and GPT support   Heinrich Schuchardt
• [PATCH v10 20/21] doc: riscv: Add documentation for Sipeed Maix Bit   Sean Anderson
• [PATCH 3/8] qemu: arm64: Add support for efi firmware management protocol routines   Heinrich Schuchardt
• [PATCH 3/8] qemu: arm64: Add support for efi firmware management protocol routines   Grant Likely
• [PATCH v4 0/6] Introduce DSA Ethernet switch class and Felix driver   Claudiu Manoil
• [PATCH v4 1/6] net: introduce DSA class for Ethernet switches   Claudiu Manoil
• [PATCH v4 2/6] drivers: net: add a DSA sandbox driver   Claudiu Manoil
• [PATCH v4 3/6] test: dm: add a simple unit test for DSA class   Claudiu Manoil
• [PATCH v4 4/6] drivers: net: add Felix DSA switch driver   Claudiu Manoil
• [PATCH v4 5/6] arm: dts: ls1028a: adds Ethernet switch node and its dependencies   Claudiu Manoil
• [PATCH v4 6/6] configs: ls1028a: enable the Ethernet switch driver in defconfig   Claudiu Manoil
• [PATCH v5 1/2] drivers: gpio: add broadcom iproc gpio driver support   Rayagonda Kokatanur
• [PATCH V2] mkimage: fit: Do not tail-pad fitImage with external data   Tom Rini
• [PATCH V2] mkimage: fit: Do not tail-pad fitImage with external data   Marek Vasut
• [PATCH V2] mkimage: fit: Do not tail-pad fitImage with external data   Tom Rini
• [PATCH v6 0/2] add brcm iproc gpio driver   Rayagonda Kokatanur
• [PATCH v6 1/2] drivers: gpio: add broadcom iproc gpio driver support   Rayagonda Kokatanur
• [PATCH v6 2/2] gpio: do not include <asm/arch/gpio.h> on TARGET_BCMNS3   Rayagonda Kokatanur
• [PATCH 3/8] qemu: arm64: Add support for efi firmware management protocol routines   Heinrich Schuchardt
• [PATCH V2] mkimage: fit: Do not tail-pad fitImage with external data   Marek Vasut
• [PATCH V2] mkimage: fit: Do not tail-pad fitImage with external data   Tom Rini
• [PATCH V2] mkimage: fit: Do not tail-pad fitImage with external data   Marek Vasut
• [PATCH V2] mkimage: fit: Do not tail-pad fitImage with external data   Simon Glass
• Pull request for UEFI sub-system for efi-2020-07-rc2 (2)   Tom Rini
• [PATCH v10 20/21] doc: riscv: Add documentation for Sipeed Maix Bit   Sean Anderson
• [PATCH v2 2/4] regmap: Allow providing read/write callbacks through struct regmap_config   Pratyush Yadav
• raspberrypi cm3 v2019.07 not working   Belisko Marek
• [PATCH 0/2] u-boot support for ODROID-C4   Beniamino Galvani
• [PATCH 1/2] arm: dts: import ODROID-C4 device tree   Beniamino Galvani
• [PATCH 2/2] boards: amlogic: add ODROID-C4 support   Beniamino Galvani
• [PULL] u-boot-usb/master   Tom Rini
• [PATCH V2] mkimage: fit: Do not tail-pad fitImage with external data   Michael Walle
• [PATCH 2/2] phy: Use _nodev naming convention if non-device clients   Jagan Teki
• [PATCH] image: Add support for ZSTD decompression   Robert Marko
• [PATCH 01/10] efi_loader: disk: add efi_disk_is_system_part()   Heinrich Schuchardt
• [PATCH] efi_loader: factor out the common code from efi_transfer_secure_state()   Heinrich Schuchardt
• [PATCH] efi_loader: fixe unreachable statement in efi_sigstore_parse_siglist   Heinrich Schuchardt
• [PATCH] lib/crypto, efi_loader: move some headers to include/crypto   Heinrich Schuchardt
• [PATCH] lib/crypto, efi_loader: avoid multiple inclusions of header files   Heinrich Schuchardt
• [PATCH] sifive: fix palmer's email address   Palmer Dabbelt
• [PATCH 1/1] efi_loader: remove redundant assignment in dp_fill()   Heinrich Schuchardt
• [PATCH 1/1] efi_loader: error handling in efi_set_variable_common().   Heinrich Schuchardt
• [PATCH 1/1] efi_loader: use logical and in do_env_print_efi()   Heinrich Schuchardt
• [PATCH 0/1] fw_setenv always locks flash whenever it tries to write   Ivan Mikhaylov
• [PATCH 1/1] [PATCH] fw_setenv: lock the flash only if it was locked before   Ivan Mikhaylov
• [PATCH v2 1/9] usb: dwc3: add dis_enblslpm_quirk   Frank Wang
• [PATCH v8 00/14] Add support for MediaTek xHCI host controller   Chunfeng Yun
• [PATCH v7 10/14] xhci: mediatek: Add support for MTK xHCI host controller   Chunfeng Yun
• [PATCH v2 5/9] phy: rockchip: add a new driver for type-c phy   Frank Wang
• [PATCH v8 05/14] usb: dwc3: use the phy bulk API to get phys   Chunfeng Yun
• [PATCH v5 5/6] test: log: test syslog logging driver   Simon Glass
• [PATCH 2/6] rtc: add rtc_write8_array() helper   Simon Glass
• [PATCH 1/6] rtc: add rtc_read8_array helper and ->read8_array method   Simon Glass
• [PATCH 3/6] rtc: fall back to ->{read,write}8_array if ->{read,write}8 are not provided   Simon Glass
• [PATCH 4/6] rtc: pcf2127: provide ->read8_array method   Simon Glass
• [PATCH 5/6] rtc: pcf2127: provide ->write8_array method   Simon Glass
• [PATCH 6/6] rtc: add rtc command   Simon Glass
• Calling i2c set speed twice for i2c_mux_bus   Simon Glass
• [v3 01/27] rtc: ds1337: Add driver model support   Priyanka Jain (OSS)
• [v2 1/4] powerpc: Enable device tree support for P1010RDB   Priyanka Jain (OSS)
• [PATCH v3 1/2] arm: rpi: Add function to trigger VL805's firmware load   Bin Meng
• [PATCH] config: Enable USB Keyboard support on RPi4   Bin Meng
• [PATCH v10 20/21] doc: riscv: Add documentation for Sipeed Maix Bit   Rick Chen
• [PATCH v10 20/21] doc: riscv: Add documentation for Sipeed Maix Bit   Sean Anderson
• [PATCH] powerpc: dts: p1010: add i2c node   Priyanka Jain (OSS)
• [PATCH] doc: fix references to README.qe_firmware   Priyanka Jain (OSS)
• [PATCH v8 05/14] usb: dwc3: use the phy bulk API to get phys   Frank Wunderlich
• [PATCH v2 0/7] rockchip: PHY drivers (USB)   Jagan Teki
• [PATCH v2 1/7] clk: rk3399: Enable/Disable the USB2PHY clk   Jagan Teki
• [PATCH v2 2/7] clk: rk3399: Set empty for TCPHY assigned-clocks   Jagan Teki
• [PATCH v2 3/7] clk: rk3399: Enable/Disable TCPHY clocks   Jagan Teki
• [PATCH v2 4/7] phy: rockchip: Add Rockchip USB2PHY driver   Jagan Teki
• [PATCH v2 5/7] arm64: dts: rk3399: Move u2phy into root port   Jagan Teki
• [PATCH v2 6/7] phy: rockchip: Add Rockchip USB TypeC PHY driver   Jagan Teki
• [PATCH v2 7/7] usb: dwc3: add dis_del_phy_power_chg_quirk   Jagan Teki
• [PATCH 0/2] u-boot support for ODROID-C4   Neil Armstrong
• [PATCH 01/36] bdinfo: nds32: Use generic bd_info   Bin Meng
• [PATCH 02/36] bdinfo: riscv: Use generic bd_info   Bin Meng
• [PATCH 03/36] bdinfo: m68k: Drop bd_info->bi_ipbfreq   Bin Meng
• [PATCH 04/36] bdinfo: xtensa: Create a generic do_bdinfo for xtensa   Bin Meng
• [PATCH 05/36] bdinfo: mips: Use the generic bd command   Bin Meng
• [PATCH 06/36] bdinfo: nios2: Use the generic bd command   Bin Meng
• [PATCH 07/36] bdinfo: microblaze: Use the generic bd command   Bin Meng
• [PATCH 08/36] bdinfo: sh: Use the generic bd command   Bin Meng
• [PATCH 09/36] bdinfo: x86: Use the generic bd command   Bin Meng
• [PATCH 10/36] bdinfo: sandbox: Use the generic bd command   Bin Meng
• [PATCH 11/36] bdinfo: nds32: Use the generic bd command   Bin Meng
• [PATCH 12/36] bdinfo: riscv: Use the generic bd command   Bin Meng
• [PATCH 13/36] bdinfo: arm: Use the generic bd command   Bin Meng
• [PATCH 14/36] bdinfo: Drop the option to not use the generic 'bd' command   Bin Meng
• [PATCH 15/36] bdinfo: Drop unused __maybe_unused   Bin Meng
• [PATCH 16/36] bdinfo: microblaze: sh: nios2: Drop arch-specific flash info   Bin Meng
• [PATCH 17/36] bdinfo: Drop unnecessary inline on functions   Bin Meng
• [PATCH 18/36] bdinfo: Drop print_std_bdinfo()   Bin Meng
• [PATCH 19/36] bdinfo: ppc: Drop arch-specific print_baudrate()   Bin Meng
• [PATCH 20/36] bdinfo: sh: arc: Drop arch-specific print_bi_mem()   Bin Meng
• [PATCH 21/36] bdinfo: Drop print_bi_boot_params()   Bin Meng
• [PATCH 22/36] bdinfo: Drop print_bi_flash()   Bin Meng
• [PATCH 23/36] bdinfo: Drop print_cpu_word_size()   Bin Meng
• [PATCH 24/36] bdinfo: net: ppc: Drop bi_enet1addr and other similar info   Bin Meng
• [PATCH 25/36] bdinfo: net: ppc: Drop prints for CONFIG_HAS_ETHn   Bin Meng
• [PATCH 26/36] bdinfo: net: Drop legacy ethernet bdinfo   Bin Meng
• [PATCH 27/36] bdinfo: net: Inline print_eths()   Bin Meng
• [PATCH 28/36] bdinfo: net: Inline print_eth_ip_addr()   Bin Meng
• [PATCH 29/36] bdinfo: Export some basic printing functions   Bin Meng
• [PATCH 30/36] bdinfo: arm: Move ARM-specific info into its own file   Bin Meng
• [PATCH 31/36] bdinfo: ppc: Move PPC-specific info into its own file   Bin Meng
• [PATCH 32/36] bdinfo: m68k: Move m68k-specific info into its own file   Bin Meng
• [PATCH 33/36] bdinfo: m68k: ppc: Move arch-specific code from bdinfo   Bin Meng
• [PATCH 34/36] bdinfo: Update the file comments   Bin Meng
• [PATCH 35/36] bdinfo: dm: Update fb_base when using driver model   Bin Meng
• [PATCH 36/36] bdinfo: x86: vesa: Update fb_base to the correct value   Bin Meng
• [PATCH] fastboot: getvar: fix partition-size return value   Gary Bisson
• [PATCH 1/6] rtc: add rtc_read8_array helper and ->read8_array method   Rasmus Villemoes
• [PATCH v3 1/2] arm: rpi: Add function to trigger VL805's firmware load   Nicolas Saenz Julienne
• [PATCH v2 09/10] pci: Add driver for Broadcom STB PCIe controller   Sylwester Nawrocki
• [PATCH 0/2] add CONFIG_ENV_SECT_SIZE_AUTO   Rasmus Villemoes
• [PATCH 1/2] env/sf.c: use a variable to hold the sector size   Rasmus Villemoes
• [PATCH 2/2] env: add CONFIG_ENV_SECT_SIZE_AUTO   Rasmus Villemoes
• [PATCH v2 7/7] rockchip: make_fit_atf: add signature handling   Heiko Stübner
• [PATCH 2/2] env: add CONFIG_ENV_SECT_SIZE_AUTO   Joakim Tjernlund
• [PATCH v2 09/10] pci: Add driver for Broadcom STB PCIe controller   Sylwester Nawrocki
• [PATCH 20/36] bdinfo: sh: arc: Drop arch-specific print_bi_mem()   Alexey Brodkin
• [PATCH 2/2] env: add CONFIG_ENV_SECT_SIZE_AUTO   Rasmus Villemoes
• [PATCH 2/2] env: add CONFIG_ENV_SECT_SIZE_AUTO   Joakim Tjernlund
• [PATCH 00/36] Tidy up the 'bd' command.   Alexey Brodkin
• [PATCH 2/2] env: add CONFIG_ENV_SECT_SIZE_AUTO   Rasmus Villemoes
• [PATCH 2/2] env: add CONFIG_ENV_SECT_SIZE_AUTO   Joakim Tjernlund
• [PATCH 2/2] env: add CONFIG_ENV_SECT_SIZE_AUTO   Rasmus Villemoes
• [PATCH V2] mkimage: fit: Do not tail-pad fitImage with external data   Michael Walle
• [PATCH 2/2] env: add CONFIG_ENV_SECT_SIZE_AUTO   Joakim Tjernlund
• [PATCH 2/2] env: add CONFIG_ENV_SECT_SIZE_AUTO   Joakim Tjernlund
• [PATCH v8 05/14] usb: dwc3: use the phy bulk API to get phys   Chunfeng Yun
• [PATCH v2 1/2] drivers: usb: musb: Fail if the ctrl mod register is missing   Arnaud Ferraris
• [PATCH v2 2/2] drivers: usb: musb: ti: Use dev_err instead of pr_err   Arnaud Ferraris
• [PATCH 2/2] env: add CONFIG_ENV_SECT_SIZE_AUTO   Rasmus Villemoes
• [PATCH v2 1/2] drivers: usb: musb: Fail if the ctrl mod register is missing   Marek Vasut
• [PATCH] usb: dwc3: fix NULL pointer issue   Chunfeng Yun
• [PATCH 2/2] env: add CONFIG_ENV_SECT_SIZE_AUTO   Joakim Tjernlund
• [PATCH] board: sunxi: enable status LED in SPL   Arnaud Ferraris
• [PATCH] board: puma: use dtb given on the commandline instead of using u-boot.dtb   Heiko Stuebner
• [PATCH 2/2] env: add CONFIG_ENV_SECT_SIZE_AUTO   Joakim Tjernlund
• [PATCH v2 7/7] usb: dwc3: add dis_del_phy_power_chg_quirk   Marek Vasut
• [PATCH v4 0/8] A small set of arm cleanups   Trevor Woerner
• [PATCH v4 1/8] arm: lpc32xx: move SoC to mach-lpc32xx   Trevor Woerner
• [PATCH v4 2/8] arch/arm/Makefile: sort machine names   Trevor Woerner
• [PATCH v4 3/8] rename symbol: CONFIG_ORION5X -> CONFIG_ARCH_ORION5X   Trevor Woerner
• [PATCH v4 4/8] arm: orion5x: finish moving SoC to mach-orion5x   Trevor Woerner
• [PATCH v4 5/8] rename symbol: CONFIG_KIRKWOOD -> CONFIG_ARCH_KIRKWOOD   Trevor Woerner
• [PATCH v4 6/8] rename symbol: CONFIG_TEGRA -> CONFIG_ARCH_TEGRA   Trevor Woerner
• [PATCH v4 7/8] rename symbol: CONFIG_STM32 -> CONFIG_ARCH_STM32   Trevor Woerner
• [PATCH v4 8/8] drivers/reset/Kconfig: fix typo   Trevor Woerner
• [PATCH V2] mkimage: fit: Do not tail-pad fitImage with external data   Alex Kiernan
• [PATCH V2] mkimage: fit: Do not tail-pad fitImage with external data   Alex Kiernan
• [PATCH v3 2/2] efi_loader: identify EFI system partition   Patrick Wildt
• [RFC] dm: uclass: add functions to get device by platdata   Walter Lozano
• [PATCH] mtd: nand: raw: mxs_nand changes for nandbcb   Peng Fan
• [PATCH] board: atmel: Fix compiler warning 'board_usb_hw_init()' not used   Eugen.Hristev at microchip.com
• [PATCH V2] mkimage: fit: Do not tail-pad fitImage with external data   Tom Rini
• [PATCH 1/3] log: Allow LOG_DEBUG to always enable log output   Simon Glass
• [PATCH 2/3] lib: Allow MD5 to be enabled in SPL   Simon Glass
• [PATCH 3/3] lib: Allow hexdump to be used in SPL   Simon Glass
• [PATCH] cmd: avb: free partition buffer upon verify completion   Gary Bisson
• [PATCH 22/36] bdinfo: Drop print_bi_flash()   Tom Rini
• [PATCH V2] mkimage: fit: Do not tail-pad fitImage with external data   Marek Vasut
• [PATCH V2] mkimage: fit: Do not tail-pad fitImage with external data   Tom Rini
• [PATCH V2] mkimage: fit: Do not tail-pad fitImage with external data   Marek Vasut
• [PATCH V2] mkimage: fit: Do not tail-pad fitImage with external data   Tom Rini
• [PATCH V2] mkimage: fit: Do not tail-pad fitImage with external data   Marek Vasut
• [PATCH 00/36] Tidy up the 'bd' command.   Simon Glass
• [PATCH 22/36] bdinfo: Drop print_bi_flash()   Simon Glass
• [PATCH 26/36] bdinfo: net: Drop legacy ethernet bdinfo   Simon Glass
• [PATCH] cmd: gpt: add eMMC and GPT support   Simon Glass
• [PATCH v2 09/10] pci: Add driver for Broadcom STB PCIe controller   Simon Glass
• [U-Boot] [PATCH v2 13/18] autoboot: Tidy up use of menukey   Simon Glass
• [PATCH v2 2/2] test: dm: update test for open-drain/open-source emulation in gpio-uclass   Simon Glass
• [PATCH v2 1/2] gpio: emulate open drain & open source in dm_gpio_set_value()   Simon Glass
• Calling i2c set speed twice for i2c_mux_bus   Simon Glass
• [PATCH v2 2/4] regmap: Allow providing read/write callbacks through struct regmap_config   Simon Glass
• [PATCH v2 1/2] gpio: emulate open drain & open source in dm_gpio_set_value()   Tom Rini
• [PATCH 3/8] qemu: arm64: Add support for efi firmware management protocol routines   Grant Likely
• [PATCH] Revert "mkimage: fit: Do not tail-pad fitImage with external data"   Tom Rini
• [PATCH] Revert "mkimage: fit: Do not tail-pad fitImage with external data"   Marek Vasut
• [PATCH 19/36] bdinfo: ppc: Drop arch-specific print_baudrate()   Stefan Roese
• [PATCH 24/36] bdinfo: net: ppc: Drop bi_enet1addr and other similar info   Stefan Roese
• [PATCH 25/36] bdinfo: net: ppc: Drop prints for CONFIG_HAS_ETHn   Stefan Roese
• [PATCH 31/36] bdinfo: ppc: Move PPC-specific info into its own file   Stefan Roese
• [PATCH 33/36] bdinfo: m68k: ppc: Move arch-specific code from bdinfo   Stefan Roese
• [PATCH 3/3] lib: Allow hexdump to be used in SPL   Stefan Roese
• [PATCH] Revert "mkimage: fit: Do not tail-pad fitImage with external data"   Tom Rini
• [PATCH] Revert "mkimage: fit: Do not tail-pad fitImage with external data"   Marek Vasut
• [PATCH 05/36] bdinfo: mips: Use the generic bd command   Daniel Schwierzeck
• [PATCH] Revert "mkimage: fit: Do not tail-pad fitImage with external data"   Tom Rini
• [PATCH V2] mkimage: fit: Do not tail-pad fitImage with external data   Alex Kiernan
• [PATCH V2] mkimage: fit: Do not tail-pad fitImage with external data   Marek Vasut
• [PATCH 07/36] bdinfo: microblaze: Use the generic bd command   Daniel Schwierzeck
• [PATCH V2] mkimage: fit: Do not tail-pad fitImage with external data   Tom Rini
• [PATCH] misc: i2c_eeprom: implement different probe test eeprom offset   Eugen Hristev
• [PATCH 30/36] bdinfo: arm: Move ARM-specific info into its own file   Daniel Schwierzeck
• [PATCH 10/13] imx: load calibration parameters from fuse for i.MX8MP   Fabio Estevam
• [PATCH V2] mkimage: fit: Do not tail-pad fitImage with external data   Marek Vasut
• [PATCH] Revert "mkimage: fit: Do not tail-pad fitImage with external data"   Marek Vasut
• [PATCH 0/2] test: fix naming of test functions in the log test suite   Heinrich Schuchardt
• [PATCH 1/2] test: describe naming conventions for macro UNIT_TEST   Heinrich Schuchardt
• [PATCH 2/2] test: fix naming of test functions in the log test suite   Heinrich Schuchardt
• [PATCH] lib: rsa: Fix unaligned 64-bit fdt accesses   Jan Kiszka
• [PATCH V2] mkimage: fit: Do not tail-pad fitImage with external data   Tom Rini
• [PATCH V2] mkimage: fit: Do not tail-pad fitImage with external data   Marek Vasut
• [PATCH] misc: i2c_eeprom: implement different probe test eeprom offset   Baruch Siach
• [PATCH V2] mkimage: fit: Do not tail-pad fitImage with external data   Tom Rini
• [PATCH 1/6] env: Convert CONFIG_DELAY_ENVIRONMENT to Kconfig   Ovidiu Panait
• [PATCH 2/6] board_r: env: Use IS_ENABLED() instead of #ifdefs   Ovidiu Panait
• [PATCH 3/6] board_r: Introduce CONFIG_PCI_INIT_R Kconfig option   Ovidiu Panait
• [PATCH 4/6] qemu_arm64_defconfig: Enable CONFIG_PCI_INIT_R   Ovidiu Panait
• [PATCH 5/6] qemu_arm_defconfig: Enable CONFIG_PCI_INIT_R   Ovidiu Panait
• [PATCH 6/6] qemu-x86*_defconfig: Enable CONFIG_PCI_INIT_R   Ovidiu Panait
• [PATCH V2] mkimage: fit: Do not tail-pad fitImage with external data   Marek Vasut
• [PATCH 1/1] efi_loader: put device tree into EfiACPIReclaimMemory   Heinrich Schuchardt
• [PATCH 1/2] armv8: ls1028a: move FSL_LAYERSCAPE to kconfig   Michael Walle
• [PATCH 2/2] board: kontron: add sl28 support   Michael Walle
• [PATCH v2 1/2] net: cortina_ni: Addd eth support for Cortina Access CAxxxx SoCs   Tom Rini
• [PATCH 1/2] JFFS2: Process obsolete nodes as well as accurate ones   Tom Rini
• [PATCH 0/6] EFI variable support via OP-TEE   Ilias Apalodimas
• [PATCH 1/6] charset: Add support for calculating bytes occupied by a u16 string   Ilias Apalodimas
• [PATCH 2/6] efi_loader: Add headers for EDK2 StandAloneMM communication   Ilias Apalodimas
• [PATCH 3/6] efi_loader: Implement EFI variable handling via OP-TEE   Ilias Apalodimas
• [PATCH 4/6] cmd: efidebug: Add support for querying UEFI variable storage   Ilias Apalodimas
• [PATCH 5/6] MAINTAINERS: Add maintainer for EFI variables via OP-TEE   Ilias Apalodimas
• [PATCH 6/6] doc: uefi.rst: Add OP-TEE variable storage config options   Ilias Apalodimas
• [PATCH v3 00/12] phy: atheros: dt bindings and cleanup   Michael Walle
• [PATCH v3 01/12] phy: atheros: Make RGMII Tx delays actually configurable for AR8035   Michael Walle
• [PATCH v3 02/12] phy: atheros: Use common functions for RGMII internal delays   Michael Walle
• [PATCH v3 03/12] phy: atheros: Clarify the configuration of the CLK_25M output pin   Michael Walle
• [PATCH v3 04/12] phy: atheros: Explicitly disable RGMII delays   Michael Walle
• [PATCH v3 05/12] phy: atheros: Clarify the intention of ar8021_config   Michael Walle
• [PATCH v3 06/12] phy: atheros: fix AR8021 PHY ID mask   Michael Walle
• [PATCH v3 07/12] phy: atheros: use defines for PHY IDs   Michael Walle
• [PATCH v3 08/12] phy: atheros: introduce debug read and write functions   Michael Walle
• [PATCH v3 09/12] phy: atheros: move delay config to common function   Michael Walle
• [PATCH v3 10/12] phy: atheros: add device tree bindings and config   Michael Walle
• [PATCH v3 11/12] phy: atheros: ar8035: remove static clock config   Michael Walle
• [PATCH v3 12/12] phy: atheros: consolidate {ar8031|ar8035}_config()   Michael Walle
• [PATCH v2 1/2] armv8: ls1028a: move FSL_LAYERSCAPE to kconfig   Michael Walle
• [PATCH v2 2/2] board: kontron: add sl28 support   Michael Walle
• [PATCH v3 00/12] phy: atheros: dt bindings and cleanup   Michael Walle
• [PATCH v3 00/12] phy: atheros: dt bindings and cleanup   Tom Rini
• [PATCH] lib: rsa: Fix unaligned 64-bit fdt accesses   Tom Rini
• [PATCH 32/36] bdinfo: m68k: Move m68k-specific info into its own file   Angelo Dureghello
• raspberrypi cm3 v2019.07 not working   Belisko Marek
• [PATCH v4 00/12] phy: atheros: dt bindings and cleanup   Michael Walle
• [PATCH v4 01/12] phy: atheros: Make RGMII Tx delays actually configurable for AR8035   Michael Walle
• [PATCH v4 02/12] phy: atheros: Use common functions for RGMII internal delays   Michael Walle
• [PATCH v4 03/12] phy: atheros: Clarify the configuration of the CLK_25M output pin   Michael Walle
• [PATCH v4 04/12] phy: atheros: Explicitly disable RGMII delays   Michael Walle
• [PATCH v4 05/12] phy: atheros: Clarify the intention of ar8021_config   Michael Walle
• [PATCH v4 06/12] phy: atheros: fix AR8021 PHY ID mask   Michael Walle
• [PATCH v4 07/12] phy: atheros: use defines for PHY IDs   Michael Walle
• [PATCH v4 08/12] phy: atheros: introduce debug read and write functions   Michael Walle
• [PATCH v4 09/12] phy: atheros: move delay config to common function   Michael Walle
• [PATCH v4 10/12] phy: atheros: add device tree bindings and config   Michael Walle
• [PATCH v4 11/12] phy: atheros: ar8035: remove static clock config   Michael Walle
• [PATCH v4 12/12] phy: atheros: consolidate {ar8031|ar8035}_config()   Michael Walle
• [PATCH 0/6] patman: Fixes to allow patman to work with Zephyr OS   Simon Glass
• [PATCH 1/6] patman: Fix 'warning' typo   Simon Glass
• [PATCH 2/6] patman: Support emacs mode with checkpatch   Simon Glass
• [PATCH 3/6] patman: Don't try to process checkpatch lines twice   Simon Glass
• [PATCH 4/6] patman: Handle checkpatch output with notes and code   Simon Glass
• [PATCH 5/6] patman: Support warnings in the patch subject   Simon Glass
• [PATCH 6/6] patman: Complain if a checkpatch line is not understood   Simon Glass
• [PATCH v4 4/4] patman: Modify functional tests for new behavior   Simon Glass
• TPM: remove duplicate definitions   Patrick Wildt
• [PATCH 1/2] test: describe naming conventions for macro UNIT_TEST   Stephen Warren
• [PATCH 10/13] imx: load calibration parameters from fuse for i.MX8MP   Peng Fan
• efi_loader: efi_variable_parse_signature() returns NULL on error   Patrick Wildt
• efi_loader: pkcs7_parse_message() returns error pointer   Patrick Wildt
• [PATCH 1/1] test: stabilize test_efi_secboot   AKASHI Takahiro
• [PATCH 08/10] cmd: add "efidebug capsule" command   AKASHI Takahiro
• [PATCH 8/8] qemu: arm64: Add documentation for capsule update   Akashi Takahiro
• [PATCH 10/13] imx: load calibration parameters from fuse for i.MX8MP   Fabio Estevam
• [PATCH 3/8] qemu: arm64: Add support for efi firmware management protocol routines   Akashi Takahiro
• [PATCH 04/10] efi_loader: capsule: add capsule_on_disk support   AKASHI Takahiro
• [PATCH] cmd: mem: Remove CONFIG_SYS_MEMTEST_SCRATCH mapping   Heiko Schocher
• [PATCH] arm: dtsi: sama5d2: Add uart4 definition to sama5d2.dtsi   Tiaki Rice
• [PATCH] cmd: mem: Remove CONFIG_SYS_MEMTEST_SCRATCH mapping   Michal Simek
• [PATCH] lib: rsa: Fix unaligned 64-bit fdt accesses   Jan Kiszka
• [PATCH 1/1] efi_loader: fix 'efidebug bootorder'   AKASHI Takahiro
• [PATCH] rsa: fix alignment issue when getting public exponent   Jan Kiszka
• efi_loader: efi_variable_parse_signature() returns NULL on error   AKASHI Takahiro
• efi_loader: efi_variable_parse_signature() returns NULL on error   AKASHI Takahiro
• [PATCH] configs: mt7629: support usb host and udisk   Chunfeng Yun
• [PATCH 5/8] efi_loader: Make the pkcs7 header parsing function an extern   Akashi Takahiro
• [RFC PATCH 1/2] arch: x86: apl: Only load VBT if CONFIG_HAVE_VBT is enabled   Bernhard Messerklinger
• Antwort: Re: [RFC PATCH 2/2] arch: x86: apl: Use devicetree for FSP configuration   Bernhard Messerklinger
• [PATCH v2 0/2] Move FSP configuration to devicetree   Bernhard Messerklinger
• [PATCH v2 1/2] arch: x86: apl: Only load VBT if CONFIG_HAVE_VBT is enabled   Bernhard Messerklinger
• [PATCH v2 2/2] arch: x86: apl: Use devicetree for FSP configuration   Bernhard Messerklinger
• [PATCH v3 0/7] Add Rockchip RK3399 USB3.0 Host support   Frank Wang
• [PATCH v3 1/7] usb: dwc3: add dis_enblslpm_quirk   Frank Wang
• [PATCH v3 2/7] usb: dwc3: add dis_u2_freeclk_exists_quirk   Frank Wang
• [PATCH v3 3/7] usb: dwc3: amend UTMI/UTMIW phy interface setup   Frank Wang
• [PATCH v3 4/7] usb: dwc3: add make compatible for rockchip platform   Frank Wang
• [PATCH v3 5/7] driver: usb: drop legacy rockchip xhci driver   Frank Wang
• [PATCH v3 6/7] ARM: dts: rk3399-evb: usb3.0 host support   Frank Wang
• [PATCH v3 7/7] configs: evb-rk3399: update support usb3.0 host   Frank Wang
• [PATCH v3 6/7] ARM: dts: rk3399-evb: usb3.0 host support   Peter Robinson
• Calling i2c set speed twice for i2c_mux_bus   Michal Simek
• [PATCH 6/8] efi: capsule: Add support for uefi capsule authentication   Akashi Takahiro
• [PATCH v2] misc: i2c_eeprom: implement different probe test eeprom offset   Eugen Hristev
• [PATCH] misc: i2c_eeprom: implement different probe test eeprom offset   Eugen.Hristev at microchip.com
• [PATCH v2 2/4] regmap: Allow providing read/write callbacks through struct regmap_config   Vignesh Raghavendra
• [PATCH] arm: dtsi: sama5d2: Add uart4 definition to sama5d2.dtsi   Eugen.Hristev at microchip.com
• [PATCH] cmd: mem: Remove CONFIG_SYS_MEMTEST_SCRATCH mapping   Heiko Schocher
• [PATCH] misc: i2c_eeprom: implement different probe test eeprom offset   Heiko Schocher
• Calling i2c set speed twice for i2c_mux_bus   Heiko Schocher
• [PATCH] misc: i2c_eeprom: implement different probe test eeprom offset   Eugen.Hristev at microchip.com
• [PATCH] arm: dtsi: sama5d2: Add uart4 definition to sama5d2.dtsi   Eugen.Hristev at microchip.com
• [PATCH v2 1/2] JFFS2: Process obsolete nodes as well as accurate ones   Petr Borsodi
• [PATCH v2 2/2] JFFS2: Add useful fields into lists   Petr Borsodi
• [PATCH v2] misc: i2c_eeprom: implement different probe test eeprom offset   Heiko Schocher
• [PATCH] ARC: HSDK: add reset for EHCI   Eugeniy Paltsev
• [PATCH 5/8] efi_loader: Make the pkcs7 header parsing function an extern   Sughosh Ganu
• [PATCH] arm: dtsi: sama5d2: Add uart4 definition to sama5d2.dtsi   Tiaki Rice
• [PATCH 6/8] efi: capsule: Add support for uefi capsule authentication   Sughosh Ganu
• [PATCH] arm: dtsi: sama5d2: Add uart4 definition to sama5d2.dtsi   Eugen.Hristev at microchip.com
• [PATCH] imx8mp_evk: Make SPL binary size smaller   Fabio Estevam
• [PATCH] imx8mp_evk: Make SPL binary size smaller   Marek Vasut
• [PATCH 04/10] efi_loader: capsule: add capsule_on_disk support   Sughosh Ganu
• [PATCH] imx8mp_evk: Make SPL binary size smaller   Harald Seiler
• wandboard does not boot with current mainline   Heiko Schocher
• [PATCH] kbuild: add -Werror=implicit-function-declaration   Masahiro Yamada
• [PATCH] imx8mp_evk: Make SPL binary size smaller   Fabio Estevam
• wandboard does not boot with current mainline   Heiko Schocher
• [PATCH] scripts/get_default_envs.sh: preserve order of multiple entries for same variable   Tom Rini
• [PATCH] include/eeprom.h: fix build errors   Tom Rini
• [PATCH] menu: add support for client defined statusline function   Tom Rini
• [PATCH v3 1/7] arm: juno: Fix Juno address variables   Tom Rini
• [PATCH v3 2/7] uart: pl011: Add proper DM clock support   Tom Rini
• [PATCH v3 3/7] arm: juno: Fix UART clock rate   Tom Rini
• [PATCH v3 4/7] arm: juno: Enable OF_CONTROL   Tom Rini
• [PATCH v3 5/7] arm: juno: Use PSCI based reset   Tom Rini
• [PATCH v3 6/7] arm: juno: enable USB   Tom Rini
• [PATCH v3 7/7] arm: vexpress64: Remove unneeded CONFIG_ check   Tom Rini
• [PATCH v2] cmd: cache: Fix non-cached memory cachability   Tom Rini
• [PATCH] rsa: fix alignment issue when getting public exponent   Tom Rini
• [PATCH] cache: l2x0: Fix missing write to Auxiliary Control Register   Tom Rini
• [PATCH] rsa: fix alignment issue when getting public exponent   Tom Rini
• [PATCH] Revert "mkimage: fit: Do not tail-pad fitImage with external data"   Tom Rini
• [PATCH] ARM: uniphier: delete or replace <common.h> includes   Masahiro Yamada
• [PATCH] ARM: uniphier: select DM_ETH   Masahiro Yamada
• [PATCH] mtd: rawnand: denali: deassert write protect pin   Masahiro Yamada
• [PATCH] include/eeprom.h: fix build errors   Rasmus Villemoes
• Bisected: omap_hsmmc 3.3V IO voltage incompatible with N900 (Was: Re: Bisected: mmc cause reboot loops on N900)   Faiz Abbas
• efi_loader: efi_variable_parse_signature() returns NULL on error   Heinrich Schuchardt
• [PATCH] x86: mtrr: Drop the mask display when changing an mtrr   Simon Glass
• [PATCH] arm: dtsi: sama5d2: Add uart4 definition to sama5d2.dtsi   Tiaki Rice
• [PATCH] x86: mtrr: Drop the mask display when changing an mtrr   Bin Meng
• [PATCH] arm: dtsi: sama5d2: Add uart4 definition to sama5d2.dtsi   Eugen.Hristev at microchip.com
• [PATCH v3 1/3] iopoll: Add read_poll_timeout common API   Jagan Teki
• [PATCH 2/2] phy: Use _nodev naming convention if non-device clients   Jagan Teki
• [PATCH 2/2] spi: Zap lpc32xx_ssp driver-related code   Jagan Teki
• wandboard does not boot with current mainline   Tom Rini
• [PATCH] clk: Fix clk func names in comments   Jagan Teki
• [PATCH] sf: Add Macronix MX25R6435F SPI NOR flash to flash parameters array   Jagan Teki
• efi_loader: pkcs7_parse_message() returns error pointer   Heinrich Schuchardt
• [PATCH v2] misc: i2c_eeprom: implement different probe test eeprom offset   Baruch Siach
• [PATCH v2] misc: i2c_eeprom: implement different probe test eeprom offset   Eugen.Hristev at microchip.com
• Bisected: omap_hsmmc 3.3V IO voltage incompatible with N900 (Was: Re: Bisected: mmc cause reboot loops on N900)   Pali Rohár
• efi_loader: pkcs7_parse_message() returns error pointer   Heinrich Schuchardt
• fatload failes on 2G file   Oliver Graute
• [PATCH] Makefile: add file 'defconfig' to clean target   Heinrich Schuchardt
• [PATCH][v4 6/6] board: tbs2910: add documentation   Soeren Moch
• [PATCH v2 1/1] efi_loader: put device tree into EfiACPIReclaimMemory   Heinrich Schuchardt
• [PATCH v2] drivers: crypto: mod_exp_sw: Re-add DM_FLAG_PRE_RELOC   Jan Kiszka
• [PATCH] lib: rsa: Also check for presence of r-squared property   Jan Kiszka
• Setting up test.py for a platform with 2 U-Boots?   Tom Rini
• [PATCH v4 01/12] phy: atheros: Make RGMII Tx delays actually configurable for AR8035   Tom Rini
• [PATCH v4 02/12] phy: atheros: Use common functions for RGMII internal delays   Tom Rini
• [PATCH v4 03/12] phy: atheros: Clarify the configuration of the CLK_25M output pin   Tom Rini
• [PATCH v4 04/12] phy: atheros: Explicitly disable RGMII delays   Tom Rini
• [PATCH v4 05/12] phy: atheros: Clarify the intention of ar8021_config   Tom Rini
• [PATCH v4 06/12] phy: atheros: fix AR8021 PHY ID mask   Tom Rini
• [PATCH v4 07/12] phy: atheros: use defines for PHY IDs   Tom Rini
• [PATCH v4 08/12] phy: atheros: introduce debug read and write functions   Tom Rini
• [PATCH v4 09/12] phy: atheros: move delay config to common function   Tom Rini
• [PATCH v4 10/12] phy: atheros: add device tree bindings and config   Tom Rini
• [PATCH v4 11/12] phy: atheros: ar8035: remove static clock config   Tom Rini
• [PATCH v4 12/12] phy: atheros: consolidate {ar8031|ar8035}_config()   Tom Rini
• [PATCH] arm: mvebu: Convert CRS305-1G-4S board to CRS3xx-98DX3236   Luka Kovacic
• [PATCH 0/2] u-boot support for ODROID-C4   Beniamino Galvani
• [PATCH v2] arm: mvebu: Convert CRS305-1G-4S board to CRS3xx-98DX3236   Luka Kovacic
• [PATCH 1/1] efi_loader: fix 'efidebug bootorder'   Heinrich Schuchardt
• [PATCH V2] mkimage: fit: Do not tail-pad fitImage with external data   Samuel Holland
• [PATCH 3/8] qemu: arm64: Add support for efi firmware management protocol routines   Heinrich Schuchardt
• [PATCH 8/8] qemu: arm64: Add documentation for capsule update   Heinrich Schuchardt
• [PATCH 1/1] test: stabilize test_efi_secboot   Heinrich Schuchardt
• wandboard does not boot with current mainline   Fabio Estevam
• [PATCH] net: tftp: fix progress marker for file transfer   Ravik Hasija
• [PATCH] sunxi: Silence warning about non-static inline function   Samuel Holland
• [PATCH] spl: Always define preloader_console_init   Samuel Holland
• [PATCH 1/1] test: stabilize test_efi_secboot   AKASHI Takahiro
• [PATCH 1/3] net: sun8i_emac: Use consistent clock bitfield definitions   Samuel Holland
• [PATCH 2/3] net: sun8i_emac: Add support for the H6 variant   Samuel Holland
• [PATCH 3/3] sunxi: H6: Enable Ethernet on the Pine H64   Samuel Holland
• Setting up test.py for a platform with 2 U-Boots?   Stephen Warren
• efi_loader: efi_variable_parse_signature() returns NULL on error   Patrick Wildt
• [PATCH] ARC: DTS: cleanup USB node names   Eugeniy Paltsev
• [PATCH 1/3] spl: fit: Minimally parse OS properties with FIT_IMAGE_TINY   Samuel Holland
• [PATCH 2/3] mksunxi_fit_atf.sh: Update FIT component descriptions   Samuel Holland
• [PATCH 3/3] sunxi: Add support for including SCP firmware   Samuel Holland
• [PATCH 3/8] qemu: arm64: Add support for efi firmware management protocol routines   Akashi Takahiro
• efi_loader: pkcs7_parse_message() returns error pointer   AKASHI Takahiro
• [PATCH v3 6/7] ARM: dts: rk3399-evb: usb3.0 host support   Frank Wang
• [PATCH 6/8] efi: capsule: Add support for uefi capsule authentication   Akashi Takahiro
• [PATCH 5/8] efi_loader: Make the pkcs7 header parsing function an extern   Akashi Takahiro
• [PATCH] imx8mp_evk: Make SPL binary size smaller   Fabio Estevam
• [RFC PATCH 2/2] arch: x86: apl: Use devicetree for FSP configuration   Simon Glass
• [PATCH v2 2/4] regmap: Allow providing read/write callbacks through struct regmap_config   Simon Glass
• [PATCH] kbuild: add -Werror=implicit-function-declaration   Simon Glass
• [PATCH] ARM: uniphier: delete or replace <common.h> includes   Simon Glass
• [PATCH 1/2] test: describe naming conventions for macro UNIT_TEST   Simon Glass
• [PATCH v1 1/3] drivers: pinctrl-single: handle different register width   Simon Glass
• [PATCH v1 2/3] drivers: pinctrl-single: add support to parse gpio properties   Simon Glass
• [PATCH v1 3/3] drivers: pinctrl-single: add request api   Simon Glass
• [PATCH v4 5/5] doc: add bind/unbind command documentation   Simon Glass
• [RFC] dm: uclass: add functions to get device by platdata   Simon Glass
• U-CLASS SPI Bus and Devices   Simon Glass
• [PATCH V2] mkimage: fit: Do not tail-pad fitImage with external data   Marek Vasut
• [PATCH] imx8mp_evk: Make SPL binary size smaller   Marek Vasut
• [PATCH] kbuild: add -Werror=implicit-function-declaration   Masahiro Yamada
• [PATCH v2] ARM: dts: sama5d2: Add uart4 definition   Tiaki Rice
• [PATCH] ARM: uniphier: delete or replace <common.h> includes   Masahiro Yamada
• USB keyboard with XHCI on x86?   Simon Glass
• USB keyboard with XHCI on x86?   Marek Vasut
• [PATCH] ARM: uniphier: delete or replace <common.h> includes   Simon Glass
• USB keyboard with XHCI on x86?   Simon Glass
• [PATCH] imx8mp_evk: Make SPL binary size smaller   Fabio Estevam
• USB keyboard with XHCI on x86?   Marek Vasut
• [PATCH] imx8mp_evk: Make SPL binary size smaller   Marek Vasut
• USB keyboard with XHCI on x86?   Bin Meng
• [PATCH] kbuild: add -Werror=implicit-function-declaration   Simon Glass
• [PATCH] imx8mp_evk: Make SPL binary size smaller   Fabio Estevam
• wandboard does not boot with current mainline   Heiko Schocher
• [PATCH] ddr: k3-am654: EMIF Tool update to 2.02 for IO optimizations and fixes   praneeth at ti.com
• wandboard does not boot with current mainline   Heiko Schocher
• [PATCH] imx8mp_evk: Make SPL binary size smaller   Fabio Estevam
• Pull request for UEFI sub-system for efi-2020-07-rc2 (3)   Heinrich Schuchardt
• [PATCH] cmd: efidebug: add a comment against Coverity check (300329)   AKASHI Takahiro
• [PATCH] cmd: efidebug: fix a wrong handling of arguments   AKASHI Takahiro
• [PATCH] efi_loader: variable: fix an reachable statement   AKASHI Takahiro
• [PATCH] efi_loader: variable: check a return value of uuid__str_to_bin()   AKASHI Takahiro
• [PATCH] cmd: env: fix unreachable statements   AKASHI Takahiro
• [PATCH] efi_loader: image_loader: fix a Coverity check against array access   AKASHI Takahiro
• [PATCH v7 04/22] lib: Makefile: build crc7.c when CONFIG_MMC_SPI   Pragnesh Patel
• [PATCH v2 1/1] cmd: gpt: add eMMC and GPT support   Rayagonda Kokatanur
• [PATCH] drivers: net: fsl-mc: fixup msi-map property   Diana Madalina Craciun
• [PATCH v2 1/1] cmd: gpt: add eMMC and GPT support   Michael Nazzareno Trimarchi
• [PATCH] ARM: uniphier: delete or replace <common.h> includes   Masahiro Yamada
• [PATCH] spl: Always define preloader_console_init   Stefan Roese
• No subject   Patrick Wildt
• [PATCH 2/3] mksunxi_fit_atf.sh: Update FIT component descriptions   Patrick Wildt
• [PATCH 1/3] spl: fit: Minimally parse OS properties with FIT_IMAGE_TINY   Patrick Wildt
• [PATCH v2 09/10] pci: Add driver for Broadcom STB PCIe controller   Nicolas Saenz Julienne
• imx: move ATF to the back of the FIT to fix loading over yModem   Patrick Wildt
• [RFC] dm: uclass: add functions to get device by platdata   Walter Lozano
• [PATCH v2 0/2] Calculate SDRAM size for Actions OWL SoCs   Amit Singh Tomar
• [PATCH v2 1/2] Actions: OWL: Calculate SDRAM size   Amit Singh Tomar
• [PATCH v2 2/2] arm: actions: remove "CONFIG_SYS_SDRAM_SIZE" for Actions Owl Semi SoCs   Amit Singh Tomar
• [PATCH v2 09/10] pci: Add driver for Broadcom STB PCIe controller   Sylwester Nawrocki
• [PATCH] imx8mp_evk: Make SPL binary size smaller   Fabio Estevam
• [PATCH] imx8mp_evk: Make SPL binary size smaller   Marek Vasut
• [PATCH] imx8mp_evk: Make SPL binary size smaller   Marek Vasut
• [PATCH] imx8mp_evk: Make SPL binary size smaller   Fabio Estevam
• wandboard does not boot with current mainline   Fabio Estevam
• [PATCH] musb-new: Use predefined configuration data for SUN50I_H6   Roman Stratiienko
• wandboard does not boot with current mainline   Heiko Schocher
• [PATCH 0/8] CLK: ARC: HSDK: add separate clock map for HSDK-4xD   Eugeniy Paltsev
• [PATCH 1/8] CLK: ARC: HSDK: avoid code duplication   Eugeniy Paltsev
• [PATCH 2/8] CLK: ARC: HSDK: drop unused offset   Eugeniy Paltsev
• [PATCH 3/8] CLK: ARC: HSDK: use appropriate config data types   Eugeniy Paltsev
• [PATCH 4/8] CLK: ARC: HSDK: driver cleanup   Eugeniy Paltsev
• [PATCH 5/8] CLK: ARC: HSDK: prepare for multiple clock maps support   Eugeniy Paltsev
• [PATCH 6/8] CLK: ARC: HSDK: make set_clock optional   Eugeniy Paltsev
• [PATCH 7/8] CLK: ARC: HSDK: define clock map with DT binding constants   Eugeniy Paltsev
• [PATCH 8/8] CLK: ARC: HSDK: add separate clock map for HSDK-4xD   Eugeniy Paltsev
• [PATCH v2] Nokia RX-51: Add automated test for running RX-51 build in qemu   Pali Rohár
• [PATCH u-boot-marvell 00/11] Armada 37xx: port comphy to generic-phys (PLEASE TEST)   Tomasz Maciej Nowak
• [PATCH v2 09/10] pci: Add driver for Broadcom STB PCIe controller   Simon Glass
• wandboard does not boot with current mainline   Tom Rini
• [PATCH v2] Nokia RX-51: Add automated test for running RX-51 build in qemu   Tom Rini
• [RFC] dm: uclass: add functions to get device by platdata   Simon Glass
• wandboard does not boot with current mainline   Heiko Schocher
• [PATCH] efi_loader: variable: fix an reachable statement   Heinrich Schuchardt
• [PATCH v2 09/10] pci: Add driver for Broadcom STB PCIe controller   Jim Quinlan
• [PATCH] spl: Always define preloader_console_init   Lokesh Vutla
• [PATCH v2 09/10] pci: Add driver for Broadcom STB PCIe controller   Nicolas Saenz Julienne
• [PATCH 4/4] kbuild: arm: Fix duplicate builds of dtbs   Andrew F. Davis
• [PATCH] imx8mp_evk: Make SPL binary size smaller   Fabio Estevam
• [PATCH 4/4] kbuild: arm: Fix duplicate builds of dtbs   Jan Kiszka
• [PATCH] config: Enable USB Keyboard support on RPi4   Matthias Brugger
• [PATCH] cmd: env: fix unreachable statements   Heinrich Schuchardt
• [PATCH] cmd: env: fix unreachable statements   Tom Rini
• [PATCH] config: Enable USB Keyboard support on RPi4   Sylwester Nawrocki
• [PATCH v3 7/7] configs: evb-rk3399: update support usb3.0 host   Jagan Teki
• [PATCH] cmd: env: fix unreachable statements   Heinrich Schuchardt
• [PATCH] cmd: env: fix unreachable statements   Tom Rini
• [PATCH v3 7/7] configs: evb-rk3399: update support usb3.0 host   Marek Vasut
• [PATCH v3 7/7] configs: evb-rk3399: update support usb3.0 host   Jagan Teki
• [PATCH 1/2] configs: migrate CONFIG_SET_DFU_ALT_INFO to defconfigs   Tom Rini
• [PATCH 2/2] configs: migrate CONFIG_SYS_MTDPARTS_RUNTIME to defconfigs   Tom Rini
• [PATCH] cmd: mem: Remove CONFIG_SYS_MEMTEST_SCRATCH mapping   Tom Rini
• [PATCH 1/3] treewide: mem: Remove alternate memtest setup from Mox and x530   Tom Rini
• [PATCH 2/3] treewide: mem: Enable MEMTEST via defconfig   Tom Rini
• [PATCH 3/3] treewide: mem: Move mtest related defines to Kconfig   Tom Rini
• [PATCH] kbuild: add -Werror=implicit-function-declaration   Tom Rini
• [PATCH v3 2/7] usb: dwc3: add dis_u2_freeclk_exists_quirk   Jagan Teki
• [PATCH v2 09/10] pci: Add driver for Broadcom STB PCIe controller   Simon Glass
• [PATCH v2 1/1] cmd: gpt: add eMMC and GPT support   Simon Glass
• [PATCH] Makefile: add file 'defconfig' to clean target   Simon Glass
• wandboard does not boot with current mainline   Simon Glass
• [PATCH] ARM: uniphier: delete or replace <common.h> includes   Simon Glass
• [PATCH] kbuild: add -Werror=implicit-function-declaration   Simon Glass
• [PATCH v3 7/7] configs: evb-rk3399: update support usb3.0 host   Marek Vasut
• [PATCH v3 1/7] usb: dwc3: add dis_enblslpm_quirk   Jagan Teki
• [PATCH v2 00/22] common: Further reduce the size of common.h   Tom Rini
• [PATCH] usb: dwc3: Add disable u2mac linestate check quirk   Jagan Teki
• [PATCH] usb: dwc3: Add disable u2mac linestate check quirk   Marek Vasut
• [PATCH V2] mkimage: fit: Do not tail-pad fitImage with external data   Tom Rini
• [PATCH] usb: dwc3: Add disable u2mac linestate check quirk   Jagan Teki
• [PATCH v3 7/7] configs: evb-rk3399: update support usb3.0 host   Jagan Teki
• [PATCH] usb: dwc3: Add disable u2mac linestate check quirk   Marek Vasut
• efi_loader: tighten PE verification code?   Patrick Wildt
• [PATCH V2] mkimage: fit: Do not tail-pad fitImage with external data   Marek Vasut
• [PATCH] config: Enable USB Keyboard support on RPi4   Matthias Brugger
• [PATCH V2] mkimage: fit: Do not tail-pad fitImage with external data   Tom Rini
• raspberrypi cm3 v2019.07 not working   Belisko Marek
• Pull request for UEFI sub-system for efi-2020-07-rc2 (3)   Tom Rini
• [PATCH v2 06/10] rpi4: add a mapping for the PCIe XHCI controller MMIO registers (ARM 32bit)   Matthias Brugger
• raspberrypi cm3 v2019.07 not working   Matthias Brugger
• raspberrypi cm3 v2019.07 not working   Belisko Marek
• [PATCH v2 1/2] env: add SAVEENV as an alias of the CMD_SAVEENV symbol   Tom Rini
• [PATCH v2 2/2] env/sf.c: honour CONFIG_SPL_SAVEENV   Tom Rini
• [PATCH 1/4] sata: ahsata: Fix resource leak   Tom Rini
• [PATCH 2/4] sata: ahsata: Fix wrong operand for checking SERR DIAG_X   Tom Rini
• [PATCH 3/4] sata: dwc_ahsata: Fix incorrect free   Tom Rini
• [PATCH 4/4] sata: dwc_ahsata: Fix memory issue in reset_sata   Tom Rini
• [PATCH 1/2] test: describe naming conventions for macro UNIT_TEST   Tom Rini
• [PATCH 2/2] test: fix naming of test functions in the log test suite   Tom Rini
• [PATCH] rpi_4_defconfig: add missing CONFIG_ARCH_FIXUP_FDT_MEMORY   Matthias Brugger
• [PATCH] rpi_4_defconfig: add missing CONFIG_ARCH_FIXUP_FDT_MEMORY   Matthias Brugger
• [PATCH 3/8] net: dwc_eth_qos: Add option "snps, reset-gpio" phy-rst gpio for stm32   David Wu
• [PATCH 3/8] net: dwc_eth_qos: Add option "snps,reset-gpio" phy-rst gpio for stm32   David Wu
• [PATCH v3 7/7] configs: evb-rk3399: update support usb3.0 host   Frank Wang
• [PATCH 4/8] net: dwc_eth_qos: Move interface() to eqos_ops struct   David Wu
• [PATCH 3/8] net: dwc_eth_qos: Add option "snps, reset-gpio" phy-rst gpio for stm32   David Wu
• [PATCH 1/1] efi_selftest: add unit test functions to HTML documentation   Heinrich Schuchardt
• [PATCH 5/8] net: dwc_eth_qos: Make clk_rx and clk_tx optional   David Wu
• [PATCH 5/8] net: dwc_eth_qos: Make clk_rx and clk_tx optional   David Wu
• [PATCH 6/8] net: dwc_eth_qos: Split eqos_start() to get link speed   David Wu
• [PATCH 1/6] charset: Add support for calculating bytes occupied by a u16 string   Heinrich Schuchardt
• [PATCH 8/8] net: gmac_rockchip: Add dwc_eth_qos support   David Wu
• [PATCH v2 1/2] Actions: OWL: Calculate SDRAM size   Manivannan Sadhasivam
• [PATCH v3 0/2] Calculate SDRAM size for Actions OWL SoCs   Amit Singh Tomar
• [PATCH v3 1/2] Actions: OWL: Calculate SDRAM size   Amit Singh Tomar
• [PATCH v3 2/2] arm: actions: remove "CONFIG_SYS_SDRAM_SIZE" for Actions Owl Semi SoCs   Amit Singh Tomar
• [PATCH 0/2] lib: charset: function descriptions   Heinrich Schuchardt
• [PATCH 1/2] lib: charset: correct function descriptions   Heinrich Schuchardt
• [PATCH 2/2] doc: add Unicode functions to API description   Heinrich Schuchardt
• [PATCH v2 1/2] Actions: OWL: Calculate SDRAM size   Amit Tomer
• [PATCH 1/1] test: unit test for u16_strsize()   Heinrich Schuchardt
• [PATCH 1/1] test: unit test for u16_strsize()   Ilias Apalodimas
• [PATCH 1/2] arm: mvebu: armada-370-xp.dtsi: add u-boot,dm-pre-reloc to spi0   Ezra Buehler
• [PATCH 2/6] efi_loader: Add headers for EDK2 StandAloneMM communication   Heinrich Schuchardt
• [PATCH v4 0/2] Calculate SDRAM size for Actions OWL SoCs   Amit Singh Tomar
• [PATCH v4 1/2] Actions: OWL: Calculate SDRAM size   Amit Singh Tomar
• [PATCH v4 2/2] arm: actions: remove "CONFIG_SYS_SDRAM_SIZE" for Actions Owl Semi SoCs   Amit Singh Tomar
• [PATCH 3/6] efi_loader: Implement EFI variable handling via OP-TEE   Heinrich Schuchardt
• [PATCH 5/6] MAINTAINERS: Add maintainer for EFI variables via OP-TEE   Heinrich Schuchardt
• [PATCH 6/6] doc: uefi.rst: Add OP-TEE variable storage config options   Heinrich Schuchardt
• [PATCH 4/6] cmd: efidebug: Add support for querying UEFI variable storage   Heinrich Schuchardt
• [PATCH 3/8] qemu: arm64: Add support for efi firmware management protocol routines   Heinrich Schuchardt
• [PATCH v4 1/2] Actions: OWL: Calculate SDRAM size   Manivannan Sadhasivam
• [PATCH v4 2/2] arm: actions: remove "CONFIG_SYS_SDRAM_SIZE" for Actions Owl Semi SoCs   Manivannan Sadhasivam
• [PATCH V2] ARM: omap3_logic boards: Convert to DM_ETH   Adam Ford
• [PATCH] kbuild: add -Werror=implicit-function-declaration   Masahiro Yamada
• [PATCH v7 10/22] clk: sifive: fu540-prci: ddr and ethernet clock initialization in SPL   Pragnesh Patel
• [PATCH 1/2] arm: mvebu: armada-370-xp.dtsi: add u-boot,dm-pre-reloc to spi0   Stefan Roese
• [PATCH 0/3] Fix the SPL loading of a FIT image from NAND   Dario Binacchi
• [PATCH 1/3] spl: fix format of function documentation   Dario Binacchi
• [PATCH 2/3] spl: fit: fail fit loading in case of FDT appending error   Dario Binacchi
• [PATCH 3/3] spl: fit: nand: fix fit loading in case of bad blocks   Dario Binacchi
• [PATCH 2/3] spl: fit: fail fit loading in case of FDT appending error   Stefan Roese
• [PATCH v1 0/7] add Ethernet support for S700   Amit Singh Tomar
• [PATCH v1 1/7] clk: actions: Add Ethernet clocks   Amit Singh Tomar
• [PATCH v1 2/7] net: phy: realtek: Add support for RTL8201F PHY module.   Amit Singh Tomar
• [PATCH v1 3/7] net: phy: realtek: Introduce PHY_RTL8201F_S700_RMII_TIMINGS to adjust rx/tx timings   Amit Singh Tomar
• [PATCH v1 4/7] net: designware: s700: Add glue code for S700 mac   Amit Singh Tomar
• [PATCH v1 5/7] arm: dts: s700: add node for ethernet controller   Amit Singh Tomar
• [PATCH v1 6/7] owl: Kconfig: Enable DM eth for OWL platform   Amit Singh Tomar
• [PATCH v1 7/7] configs: Enable mac and phy configs   Amit Singh Tomar
• [PATCH v8 00/21] RISC-V SiFive FU540 support SPL   Pragnesh Patel
• [PATCH v8 01/21] misc: add driver for the SiFive otp controller   Pragnesh Patel
• [PATCH v8 02/21] riscv: sifive: fu540: Use OTP DM driver for serial environment variable   Pragnesh Patel
• [PATCH v8 03/21] riscv: Add _image_binary_end for SPL   Pragnesh Patel
• [PATCH v8 04/21] lib: Makefile: build crc7.c when CONFIG_MMC_SPI   Pragnesh Patel
• [PATCH v8 05/21] riscv: sifive: dts: fu540: Add board -u-boot.dtsi files   Pragnesh Patel
• [PATCH v8 06/21] sifive: fu540: add ddr driver   Pragnesh Patel
• [PATCH v8 07/21] sifive: dts: fu540: Add DDR controller and phy register settings   Pragnesh Patel
• [PATCH v8 08/21] riscv: sifive: dts: fu540: add U-Boot dmc node   Pragnesh Patel
• [PATCH v8 09/21] clk: sifive: fu540-prci: Add clock enable and disable ops   Pragnesh Patel
• [PATCH v8 10/21] clk: sifive: fu540-prci: Add ddr clock initialization in SPL   Pragnesh Patel
• [PATCH v8 11/21] clk: sifive: fu540-prci: Add ehternet clock initialization in SPL   Pragnesh Patel
• [PATCH v8 12/21] riscv: dts: sifive: Sync hifive-unleashed-a00 dts from linux   Pragnesh Patel
• [PATCH v8 13/21] riscv: cpu: fu540: Add support for cpu fu540   Pragnesh Patel
• [PATCH v8 14/21] riscv: Add place-holder for driver compilation   Pragnesh Patel
• [PATCH v8 15/21] riscv: sifive: fu540: add SPL configuration   Pragnesh Patel
• [PATCH v8 16/21] sifive: fu540: Add sample SD gpt partition layout   Pragnesh Patel
• [PATCH v8 17/21] sifive: fu540: Add U-Boot proper sector start   Pragnesh Patel
• [PATCH v8 18/21] configs: fu540: Add config options for U-Boot SPL   Pragnesh Patel
• [PATCH v8 19/21] sifive: dts: fu540: Enable L2 Cache in U-Boot   Pragnesh Patel
• [PATCH v8 20/21] riscv: sifive: fu540: enable all cache ways from U-Boot proper   Pragnesh Patel
• [PATCH v8 21/21] doc: sifive: fu540: Add description for OpenSBI generic platform   Pragnesh Patel
• [PATCH 1/1] tools: mkimage: use /* fallthrough */ as needed   Heinrich Schuchardt
• [PATCH 1/1] tools: mkimage: use /* fallthrough */ as needed   Heinrich Schuchardt
• [PATCH 1/1] tools: ftdgrep: use /* fallthrough */ as needed   Heinrich Schuchardt
• [PATCH 1/1] cmd: efidebug: fix -Werror=type-limits warning   Heinrich Schuchardt
• spl: allow board_spl_fit_post_load() to fail   Patrick Wildt
• [PATCH 1/1] i2c: observe scl_count in i2c_deblock_gpio_loop()   Heinrich Schuchardt
• Pull request: u-boot-spi/master   Jagan Teki
• [PATCH v2] Nokia RX-51: Add automated test for running RX-51 build in qemu   Lokesh Vutla
• [PATCH v2] Nokia RX-51: Add automated test for running RX-51 build in qemu   Pali Rohár
• spl: allow board_spl_fit_post_load() to fail   Heinrich Schuchardt
• [PATCH v2 8/8] rockchip: Enable PCIe/M.2 on rock960 board   Jagan Teki
• [PATCH v3 0/6] rockchip: Add PCIe host support   Jagan Teki
• [PATCH v3 1/6] clk: rk3399: Add enable/disable clks   Jagan Teki
• [PATCH v3 2/6] clk: rk3399: Enable/Disable the PCIEPHY clk   Jagan Teki
• [PATCH v3 3/6] pci: Add Rockchip PCIe controller driver   Jagan Teki
• [PATCH v3 4/6] pci: Add Rockchip PCIe PHY controller driver   Jagan Teki
• [PATCH v3 5/6] rockchip: Enable PCIe/M.2 on rk3399 board w/ M.2   Jagan Teki
• [PATCH v3 6/6] rockchip: Enable PCIe/M.2 on rock960 board   Jagan Teki
• [PATCH][v4 6/6] board: tbs2910: add documentation   Denis 'GNUtoo' Carikli
• spl: allow board_spl_fit_post_load() to fail   Patrick Wildt
• [PATCH][v4 6/6] board: tbs2910: add documentation   Denis 'GNUtoo' Carikli
• spl: allow board_spl_fit_post_load() to fail   Heinrich Schuchardt
• spl: allow board_spl_fit_post_load() to fail   Patrick Wildt
• [PATCH v2 2/2] env/sf.c: honour CONFIG_SPL_SAVEENV   Rasmus Villemoes
• [PATCH 2/3] mksunxi_fit_atf.sh: Update FIT component descriptions   Samuel Holland
• [PATCH 2/3] mksunxi_fit_atf.sh: Update FIT component descriptions   Patrick Wildt
• [PATCH 1/1] common/board_f: avoid -Wtype-limits warning   Heinrich Schuchardt
• [PATCH 1/1] tools: value checks in rkcommon_check_params()   Heinrich Schuchardt
• [PATCH v8 06/21] sifive: fu540: add ddr driver   Giulio Benetti
• [PATCH v2 0/2] Fix boot from SPI flash on Synology DS414   Ezra Buehler
• [PATCH v2 1/2] arm: mvebu: ds414: add u-boot,dm-pre-reloc to spi0   Ezra Buehler
• [PATCH v2 2/2] arm: mvebu: ds414: define CONFIG_SYS_U_BOOT_OFFS   Ezra Buehler
• [PATCH 01/10] net: rtl8139: Factor out device name assignment   Marek Vasut
• [PATCH 02/10] net: rtl8139: Switch from malloc()+memset() to calloc()   Marek Vasut
• [PATCH 03/10] net: rtl8139: Use dev->iobase instead of custom ioaddr   Marek Vasut
• [PATCH 04/10] net: rtl8139: Clean up bus_to_phys()/phys_to_bus() macros   Marek Vasut
• [PATCH 05/10] net: rtl8139: Introduce device private data   Marek Vasut
• [PATCH 06/10] net: rtl8139: Pass private data into rtl8139_eeprom_delay()   Marek Vasut
• [PATCH 07/10] net: rtl8139: Split out common and non-DM functions   Marek Vasut
• [PATCH 08/10] net: rtl8139: Use PCI_DEVICE() to define PCI device compat list   Marek Vasut
• [PATCH 09/10] net: rtl8139: Read HW address from EEPROM only on probe   Marek Vasut
• [PATCH 10/10] net: rtl8139: Add DM support   Marek Vasut
• [PATCH 1/2] sh: r2dplus: Enable board_eth_init only for non-DM case   Marek Vasut
• [PATCH 2/2] sh: r2dplus: Switch to DM ETH   Marek Vasut
• [PATCH 1/5] sh: Set gd->malloc_base if MALLOC_F_LEN is set   Marek Vasut
• [PATCH 2/5] serial: sh: Improve FIFO empty check on RX   Marek Vasut
• [PATCH 3/5] sh: r2dplus: Add SCIF1 to the basic DT   Marek Vasut
• [PATCH 4/5] sh: r2dplus: Enable DM_SERIAL and DM_CLK   Marek Vasut
• [PATCH 5/5] sh: r2dplus: Enable HUSH   Marek Vasut
• [PATCH v2 2/2] env/sf.c: honour CONFIG_SPL_SAVEENV   Tom Rini
• [PATCH v2] Nokia RX-51: Add automated test for running RX-51 build in qemu   Tom Rini
• Pull request: u-boot-spi/master   Tom Rini
• [PATCH v3 0/2] Basic Kontron SMARC-sAL28 board support   Michael Walle
• [PATCH v3 1/2] armv8: ls1028a: move FSL_LAYERSCAPE to kconfig   Michael Walle
• [PATCH v3 2/2] board: kontron: add sl28 support   Michael Walle
• [PATCH v2 0/2] Fix boot from SPI flash on Synology DS414   Chris Packham
• [PATCH v8 06/21] sifive: fu540: add ddr driver   Pragnesh Patel
• [PATCH v8 06/21] sifive: fu540: add ddr driver   Pragnesh Patel
• [PATCH v7 01/22] misc: add driver for the SiFive otp controller   Jagan Teki
• [PATCH][v4 6/6] board: tbs2910: add documentation   Soeren Moch
• [PATCH v7 14/22] riscv: Add place-holder for driver compilation   Jagan Teki
• [PATCH v8 18/21] configs: fu540: Add config options for U-Boot SPL   Jagan Teki
• [PATCH v7 19/22] sifive: dts: fu540: Enable L2 Cache in U-Boot   Jagan Teki
• [PATCH] cmd: avb: free partition buffer upon verify completion   Igor Opaniuk
• [PATCH 5/8] efi_loader: Make the pkcs7 header parsing function an extern   Sughosh Ganu
• [PATCH 6/8] efi: capsule: Add support for uefi capsule authentication   Sughosh Ganu
• [PATCH 3/8] qemu: arm64: Add support for efi firmware management protocol routines   Sughosh Ganu
• [PATCH 1/1] tools: ftdgrep: use /* fallthrough */ as needed   Masahiro Yamada
• rk3399 single channel lpddr4 setup   Jagan Teki
• [PATCH 2/2] odroid-c2: enable USB host controller   Beniamino Galvani
• Pull request: u-boot-spi/master   Jagan Teki
• [PATCH] imx8mp_evk: Make SPL binary size smaller   Peng Fan
• [PATCH V2] usb: ehci-omap: Add Support DM_USB and OF_CONTROL   Adam Ford
• [PATCH] imx8mp_evk: Make SPL binary size smaller   Marek Vasut
• [PATCH V2] usb: ehci-omap: Add Support DM_USB and OF_CONTROL   Marek Vasut
• [PULL] u-boot-sh/master   Marek Vasut
• [PATCH v2 00/22] common: Further reduce the size of common.h   Simon Glass
• [PATCH v8 19/21] sifive: dts: fu540: Enable L2 Cache in U-Boot   Jagan Teki
• [PATCH v6 1/2] usb: Update struct usb_device to indicate speed enum   Simon Glass
• [PATCH v6 2/2] pci: Fix typo in definition for PCI_DEV   Simon Glass
• [PATCH v6 1/2] usb: Update struct usb_device to indicate speed enum   Marek Vasut
• [PATCH] test: Use ut_asserteq_mem() where possible   Simon Glass
• [PATCH v3 00/22] common: Further reduce the size of common.h   Simon Glass
• [PATCH v3 01/22] common: Drop uuid.h from common header   Simon Glass
• [PATCH v3 02/22] flash: Tidy up coding style for flash functions   Simon Glass
• [PATCH v3 03/22] common: Drop flash.h from common header   Simon Glass
• [PATCH v3 04/22] arm: Don't include common.h in header files   Simon Glass
• [PATCH v3 05/22] common: Drop net.h from common header   Simon Glass
• [PATCH v3 06/22] part: Drop disk_partition_t typedef   Simon Glass
• [PATCH v3 07/22] common: Drop part.h from common header   Simon Glass
• [PATCH v3 08/22] bootstage: Use BOOTSTAGE instead of BOOTSTATE   Simon Glass
• [PATCH v3 09/22] common: Drop bootstage.h from common header   Simon Glass
• [PATCH v3 10/22] common: Drop image.h from common header   Simon Glass
• [PATCH v3 11/22] common: Drop init.h from common header   Simon Glass
• [PATCH v3 12/22] command: Remove the cmd_tbl_t typedef   Simon Glass
• [PATCH v3 13/22] Fix some checkpatch warnings in calls to debug()   Simon Glass
• [PATCH v3 14/22] common: Drop log.h from common header   Simon Glass
• [PATCH v3 15/22] common: Drop asm/ptrace.h from common header   Simon Glass
• [PATCH v3 16/22] common: Drop asm_offsets.h from common header   Simon Glass
• [PATCH v3 17/22] common: Drop linux/bug.h from common header   Simon Glass
• [PATCH v3 18/22] common: Drop linux/stringify.h from common header   Simon Glass
• [PATCH v3 19/22] Fix some checkpatch warnings in calls to udelay()   Simon Glass
• [PATCH v3 20/22] common: Drop linux/delay.h from common header   Simon Glass
• [PATCH v3 21/22] Use __ASSEMBLY__ as the assembly macros   Simon Glass
• [PATCH v3 22/22] common: Drop linux/bitops.h from common header   Simon Glass
• [PATCH v2] test: Use ut_asserteq_mem() where possible   Simon Glass
• [PATCH] test: Use ut_asserteq_mem() where possible   Heinrich Schuchardt
• [PATCH V2] mkimage: fit: Do not tail-pad fitImage with external data   Marek Vasut
• Pull request: u-boot-spi/master   Tom Rini
• [PATCH 0/2] mtd: spi-nand: Update Toshiba support   Robert Marko
• [PATCH 1/2] mtd: spinand: toshiba: Rename function name to change suffix and prefix (8Gbit)   Robert Marko
• [PATCH 2/2] mtd: spinand: toshiba: Support for new Kioxia Serial NAND   Robert Marko
• Pull request v2: u-boot-spi/master   Jagan Teki
• [PATCH v2 00/39] Tidy up the 'bd' command.   Simon Glass
• [PATCH v2 01/39] tbs2910: Drop the 'bd' command   Simon Glass
• [PATCH v2 02/39] bdinfo: nds32: Use generic bd_info   Simon Glass
• [PATCH v2 03/39] bdinfo: riscv: Use generic bd_info   Simon Glass
• [PATCH v2 04/39] bdinfo: m68k: Drop bd_info->bi_ipbfreq   Simon Glass
• [PATCH v2 05/39] bdinfo: xtensa: Create a generic do_bdinfo for xtensa   Simon Glass
• [PATCH v2 06/39] bdinfo: mips: Use the generic bd command   Simon Glass
• [PATCH v2 07/39] bdinfo: nios2: Use the generic bd command   Simon Glass
• [PATCH v2 08/39] bdinfo: microblaze: Use the generic bd command   Simon Glass
• [PATCH v2 09/39] bdinfo: sh: Use the generic bd command   Simon Glass
• [PATCH v2 10/39] bdinfo: x86: Use the generic bd command   Simon Glass
• [PATCH v2 11/39] bdinfo: sandbox: Use the generic bd command   Simon Glass
• [PATCH v2 12/39] bdinfo: nds32: Use the generic bd command   Simon Glass
• [PATCH v2 13/39] bdinfo: riscv: Use the generic bd command   Simon Glass
• [PATCH v2 14/39] bdinfo: powerpc: Use the generic bd command   Simon Glass
• [PATCH v2 15/39] bdinfo: m68k: Use the generic bd command   Simon Glass
• [PATCH v2 16/39] bdinfo: arm: Use the generic bd command   Simon Glass
• [PATCH v2 17/39] bdinfo: arc: Use the generic bd command   Simon Glass
• [PATCH v2 18/39] bdinfo: Drop the option to not use the generic 'bd' command   Simon Glass
• [PATCH v2 19/39] bdinfo: Drop unused __maybe_unused   Simon Glass
• [PATCH v2 20/39] bdinfo: microblaze: sh: nios2: Drop arch-specific flash info   Simon Glass
• [PATCH v2 21/39] bdinfo: Drop unnecessary inline on functions   Simon Glass
• [PATCH v2 22/39] bdinfo: Drop print_std_bdinfo()   Simon Glass
• [PATCH v2 23/39] bdinfo: ppc: Drop arch-specific print_baudrate()   Simon Glass
• [PATCH v2 24/39] bdinfo: sh: arc: Drop arch-specific print_bi_mem()   Simon Glass
• [PATCH v2 25/39] bdinfo: Drop print_bi_boot_params()   Simon Glass
• [PATCH v2 26/39] bdinfo: Drop print_bi_flash()   Simon Glass
• [PATCH v2 27/39] bdinfo: Drop print_cpu_word_size()   Simon Glass
• [PATCH v2 28/39] bdinfo: net: ppc: Drop bi_enet1addr and other similar info   Simon Glass
• [PATCH v2 29/39] bdinfo: net: ppc: Drop prints for CONFIG_HAS_ETHn   Simon Glass
• [PATCH v2 30/39] bdinfo: net: Drop legacy ethernet bdinfo   Simon Glass
• [PATCH v2 31/39] bdinfo: net: Inline print_eth_ip_addr()   Simon Glass
• [PATCH v2 32/39] bdinfo: Export some basic printing functions   Simon Glass
• [PATCH v2 33/39] bdinfo: arm: Move ARM-specific info into its own file   Simon Glass
• [PATCH v2 34/39] bdinfo: ppc: Move PPC-specific info into its own file   Simon Glass
• [PATCH v2 35/39] bdinfo: m68k: Move m68k-specific info into its own file   Simon Glass
• [PATCH v2 36/39] bdinfo: m68k: ppc: Move arch-specific code from bdinfo   Simon Glass
• [PATCH v2 37/39] bdinfo: Update the file comments   Simon Glass
• [PATCH v2 38/39] bdinfo: dm: Update fb_base when using driver model   Simon Glass
• [PATCH v2 39/39] bdinfo: x86: vesa: Update fb_base to the correct value   Simon Glass
• [PATCH v3 1/6] clk: rk3399: Add enable/disable clks   Suniel Mahesh
• [PATCH v3 2/6] clk: rk3399: Enable/Disable the PCIEPHY clk   Suniel Mahesh
• [PATCH v3 3/6] pci: Add Rockchip PCIe controller driver   Suniel Mahesh
• [PATCH v3 4/6] pci: Add Rockchip PCIe PHY controller driver   Suniel Mahesh
• [PATCH v3 5/6] rockchip: Enable PCIe/M.2 on rk3399 board w/ M.2   Suniel Mahesh
• [PATCH v3 1/6] clk: rk3399: Add enable/disable clks   Suniel Mahesh
• [PATCH v2 00/35] dm: Add programmatic generation of ACPI tables (part B)   Simon Glass
• [PATCH v2 01/35] dm: core: Add an ACPI name for the root node   Simon Glass
• [PATCH v2 02/35] acpi: Add a function to get a device path and scope   Simon Glass
• [PATCH v2 03/35] acpi: Add a way to check device status   Simon Glass
• [PATCH v2 04/35] irq: Add a method to convert an interrupt to ACPI   Simon Glass
• [PATCH v2 05/35] acpi: Support generation of ACPI code   Simon Glass
• [PATCH v2 06/35] acpi: Support generation of interrupt descriptor   Simon Glass
• [PATCH v2 07/35] gpio: Add a method to convert a GPIO to ACPI   Simon Glass
• [PATCH v2 08/35] acpi: Support string output   Simon Glass
• [PATCH v2 09/35] acpi: Support generation of GPIO descriptor   Simon Glass
• [PATCH v2 10/35] acpi: Support generation of a GPIO/irq for a device   Simon Glass
• [PATCH v2 11/35] acpi: Support generation of I2C descriptor   Simon Glass
• [PATCH v2 12/35] acpi: Support generation of SPI descriptor   Simon Glass
• [PATCH v2 13/35] acpigen: Support writing a length   Simon Glass
• [PATCH v2 14/35] acpigen: Support writing a package   Simon Glass
• [PATCH v2 15/35] acpi: Support writing an integer   Simon Glass
• [PATCH v2 16/35] acpi: Support writing a string   Simon Glass
• [PATCH v2 17/35] acpi: Support writing a name   Simon Glass
• [PATCH v2 18/35] acpi: Support writing a UUID   Simon Glass
• [PATCH v2 19/35] acpi: Support writing Device Properties objects via _DSD   Simon Glass
• [PATCH v2 20/35] acpi: Support writing a GPIO   Simon Glass
• [PATCH v2 21/35] acpi: Support copying properties from device tree to ACPI   Simon Glass
• [PATCH v2 22/35] acpi: Add support for various misc ACPI opcodes   Simon Glass
• [PATCH v2 23/35] acpi: Add support for writing a Power Resource   Simon Glass
• [PATCH v2 24/35] acpi: Add support for writing a GPIO power sequence   Simon Glass
• [PATCH v2 25/35] acpi: Add support for a generic power sequence   Simon Glass
• [PATCH v2 26/35] acpi: Add support for SSDT generation   Simon Glass
• [PATCH v2 27/35] x86: acpi: Move MADT down a bit   Simon Glass
• [PATCH v2 28/35] acpi: Record the items added to SSDT   Simon Glass
• [PATCH v2 29/35] acpi: Support ordering SSDT data by device   Simon Glass
• [PATCH v2 30/35] x86: Allow devices to write an SSDT   Simon Glass
• [PATCH v2 31/35] acpi: Add support for DSDT generation   Simon Glass
• [PATCH v2 32/35] x86: Allow devices to write to DSDT   Simon Glass
• [PATCH v2 33/35] pci: Avoid a crash in device_is_on_pci_bus()   Simon Glass
• [PATCH v2 34/35] dm: acpi: Enhance acpi_get_name()   Simon Glass
• [PATCH v2 35/35] acpi: Add an acpi split command   Simon Glass
• [PATCH 07/36] bdinfo: microblaze: Use the generic bd command   Simon Glass
• [PATCH 13/18] common: Drop asm/ptrace.h from common header   Simon Glass
• [PATCH 1/1] common/board_f: avoid -Wtype-limits warning   Simon Glass
• efi_loader: tighten PE verification code?   Simon Glass
• [PATCH] kbuild: add -Werror=implicit-function-declaration   Simon Glass
• [PATCH v2 1/2] arch: x86: apl: Only load VBT if CONFIG_HAVE_VBT is enabled   Simon Glass
• [PATCH v2 2/2] arch: x86: apl: Use devicetree for FSP configuration   Simon Glass
• efi_loader: tighten PE verification code?   Patrick Wildt
• [PATCH v2 2/2] arch: x86: apl: Use devicetree for FSP configuration   Simon Glass
• USB keyboard with XHCI on x86?   Simon Glass
• TPM: remove duplicate definitions   Simon Glass
• [PATCH] kbuild: add -Werror=implicit-function-declaration   Masahiro Yamada
• [PATCH] kbuild: add -Werror=implicit-function-declaration   Marek Vasut
• efi_loader: tighten PE verification code?   AKASHI Takahiro
• [PATCH 6/8] efi: capsule: Add support for uefi capsule authentication   Akashi Takahiro
• [PATCH 1/8] semihosting: Change semihosting file operation functions into global symbols   Akashi Takahiro
• [PATCH] omap3logic: Return omap3logic boards to OF_PLATDATA in SPL   Lokesh Vutla
• [PATCH v3 21/22] Use __ASSEMBLY__ as the assembly macros   Masahiro Yamada
• wandboard does not boot with current mainline   Heiko Schocher
• [PATCH v7 01/22] misc: add driver for the SiFive otp controller   Pragnesh Patel
• [PATCH v7 14/22] riscv: Add place-holder for driver compilation   Pragnesh Patel
• [PATCH v8 18/21] configs: fu540: Add config options for U-Boot SPL   Pragnesh Patel
• [PATCH v7 19/22] sifive: dts: fu540: Enable L2 Cache in U-Boot   Pragnesh Patel
• [PATCH v8 19/21] sifive: dts: fu540: Enable L2 Cache in U-Boot   Pragnesh Patel
• [PATCH 1/2] imx: imx8mp_evk: fix boot issue   Peng Fan
• [PATCH 2/2] imx8mp_evk: simplify board spl code   Peng Fan
• [PATCH v2 0/3] Fix the SPL loading of a FIT image from NAND   Dario Binacchi
• [PATCH v2 1/3] spl: fix format of function documentation   Dario Binacchi
• [PATCH v2 2/3] spl: fit: fail fit loading in case of FDT appending error   Dario Binacchi
• [PATCH v2 3/3] spl: fit: nand: fix fit loading in case of bad blocks   Dario Binacchi
• [PATCH v3 11/22] common: Drop init.h from common header   Masahiro Yamada
• [PATCH v2 2/2] env/sf.c: honour CONFIG_SPL_SAVEENV   Rasmus Villemoes
• [PATCH v7 14/22] riscv: Add place-holder for driver compilation   Jagan Teki
• [PATCH v7 19/22] sifive: dts: fu540: Enable L2 Cache in U-Boot   Jagan Teki
• [PATCH 1/1] test: stabilize test_efi_secboot   AKASHI Takahiro
• [PATCH v2 00/11] Add dwc_eth_qos support for rockchip   David Wu
• [PATCH v2 01/11] net: dwc_eth_qos: Use dev_ functions calls to get FDT data   David Wu
• [PATCH v2 02/11] net: dwc_eth_qos: Add option "snps, reset-gpio" phy-rst gpio for stm32   David Wu
• [PATCH v2 03/11] net: dwc_eth_qos: Move interface() to eqos_ops structure   David Wu
• [PATCH v2 04/11] net: dwc_eth_qos: Make clk_rx and clk_tx optional   David Wu
• [PATCH v3 11/22] common: Drop init.h from common header   Masahiro Yamada
• [PATCH v2 05/11] net: dwc_eth_qos: Split eqos_start() to get link speed   David Wu
• [PATCH v2 06/11] net: dwc_eth_qos: make eqos_start_clks and eqos_stop_clks optional   David Wu
• [PATCH v2 07/11] net: dwc_eth_qos: Export common struct and interface at head file   David Wu
• [PATCH v2 08/11] net: gmac_rockchip: Add dwc_eth_qos support   David Wu
• [PATCH v7 19/22] sifive: dts: fu540: Enable L2 Cache in U-Boot   Pragnesh Patel
• [PATCH v2 09/11] net: dwc_eth_qos: Add eqos_rockchip_ops   David Wu
• [PATCH v2 10/11] net: dwc_eth_qos: Add EQOS_MAC_MDIO_ADDRESS_CR_100_150 for Rockchip   David Wu
• [PATCH v2 10/11] net: dwc_eth_qos: Add EQOS_MAC_MDIO_ADDRESS_CR_100_150 for Rockchip   David Wu
• [PATCH v2 11/11] net: gmac_rockchip: Add RV1126 gmac support   David Wu
• [PATCH v2 10/11] net: dwc_eth_qos: Add EQOS_MAC_MDIO_ADDRESS_CR_100_150 for Rockchip   David Wu
• [PATCH v7 14/22] riscv: Add place-holder for driver compilation   Pragnesh Patel
• [PATCH V2 1/2] imx: imx8mp_evk: fix boot issue   Peng Fan
• [PATCH V2 2/2] imx8mp_evk: simplify board spl code   Peng Fan
• [PATCH v7 19/22] sifive: dts: fu540: Enable L2 Cache in U-Boot   Jagan Teki
• [PATCH v7 19/22] sifive: dts: fu540: Enable L2 Cache in U-Boot   Pragnesh Patel
• [PATCH v4 00/16] Add Rockchip RK3399 USB3.0 Host support   Frank Wang
• [PATCH v4 01/16] clk: rk3399: Enable/Disable the USB2PHY clk   Frank Wang
• [PATCH v4 02/16] clk: rk3399: Set empty for TCPHY assigned-clocks   Frank Wang
• [PATCH v4 03/16] clk: rk3399: Enable/Disable TCPHY clocks   Frank Wang
• [PATCH v4 04/16] phy: rockchip: Add Rockchip USB2PHY driver   Frank Wang
• [PATCH v4 05/16] arm64: dts: rk3399: Move u2phy into root port   Frank Wang
• [PATCH v4 06/16] phy: rockchip: Add Rockchip USB TypeC PHY driver   Frank Wang
• [PATCH v4 07/16] usb: dwc3: add dis_enblslpm_quirk   Frank Wang
• [PATCH v4 08/16] usb: dwc3: add dis_u2_freeclk_exists_quirk   Frank Wang
• [PATCH v4 09/16] usb: dwc3: Add disable u2mac linestate check quirk   Frank Wang
• [PATCH v4 10/16] usb: dwc3: Enable AutoRetry feature in the controller   Frank Wang
• [PATCH v4 11/16] usb: dwc3: amend UTMI/UTMIW phy interface setup   Frank Wang
• [PATCH v4 12/16] usb: dwc3: add make compatible for rockchip platform   Frank Wang
• [PATCH v4 13/16] driver: usb: drop legacy rockchip xhci driver   Frank Wang
• [PATCH v4 14/16] ARM: dts: rk3399-evb: usb3.0 host support   Frank Wang
• [PATCH v4 15/16] configs: evb-rk3399: update support usb3.0 host   Frank Wang
• [PATCH v4 16/16] roc-rk3399-pc: Enable USB3.0 Host   Frank Wang
• [PATCH] armv8: cache_v8: fix mmu_set_region_dcache_behaviour   Peng Fan
• [PATCH 3/6] efi_loader: Implement EFI variable handling via OP-TEE   Ilias Apalodimas
• [PATCH 5/6] MAINTAINERS: Add maintainer for EFI variables via OP-TEE   Ilias Apalodimas
• [PATCH v7 19/22] sifive: dts: fu540: Enable L2 Cache in U-Boot   Jagan Teki
• [PATCH v2 1/1] efi_loader: put device tree into EfiACPIReclaimMemory   Grant Likely
• [PATCH 4/6] cmd: efidebug: Add support for querying UEFI variable storage   Ilias Apalodimas
• [PATCH v4 07/16] usb: dwc3: add dis_enblslpm_quirk   Jagan Teki
• [PATCH v4 08/16] usb: dwc3: add dis_u2_freeclk_exists_quirk   Jagan Teki
• [PATCH 6/6] doc: uefi.rst: Add OP-TEE variable storage config options   Ilias Apalodimas
• [PATCH v8 15/21] riscv: sifive: fu540: add SPL configuration   Jagan Teki
• [PATCH v7 19/22] sifive: dts: fu540: Enable L2 Cache in U-Boot   Bin Meng
• [PATCH v7 19/22] sifive: dts: fu540: Enable L2 Cache in U-Boot   Jagan Teki
• [PATCH] cmd: avb: free partition buffer upon verify completion   Gary Bisson
• Status i.MX U-Boot patches   Stefano Babic
• [PATCH v7 19/22] sifive: dts: fu540: Enable L2 Cache in U-Boot   Pragnesh Patel
• Status i.MX U-Boot patches   Peng Fan
• [PATCH v8 15/21] riscv: sifive: fu540: add SPL configuration   Pragnesh Patel
• [PATCH v7 19/22] sifive: dts: fu540: Enable L2 Cache in U-Boot   Bin Meng
• [PATCH v4 12/16] usb: dwc3: add make compatible for rockchip platform   Marek Vasut
• [PATCH 0/6] imx: clean up sip file   Peng Fan
• [PATCH 1/6] imx8: misc: use arm_smccc_smc   Peng Fan
• [PATCH 2/6] imx8m: soc: use arm_smccc_smc   Peng Fan
• [PATCH 3/6] imx: bootaux: use arm_smccc_smc   Peng Fan
• [PATCH 4/6] imx8: fuse: use arm_smccc_smc   Peng Fan
• [PATCH 5/6] imx: power-domain: use arm_smccc_smc   Peng Fan
• [PATCH 6/6] imx: remove imx sip file   Peng Fan
• [PATCH 0/8] imx: drivers: ddr: ddr driver update   Peng Fan
• [PATCH 1/8] driver: ddr: imx: skip ddr_ss_gpr config on imx8mn   Peng Fan
• [PATCH 2/8] driver: ddr: imx: correct the pwrctl setting of selfref_en on imx8m   Peng Fan
• [PATCH 3/8] imx8mp: ddr: Add inline ECC feature support   Peng Fan
• [PATCH 4/8] drivers: ddr: imx8m: add print for DRAM rate   Peng Fan
• [PATCH v7 19/22] sifive: dts: fu540: Enable L2 Cache in U-Boot   Pragnesh Patel
• [PATCH 3/6] efi_loader: Implement EFI variable handling via OP-TEE   Ilias Apalodimas
• [PATCH v7 19/22] sifive: dts: fu540: Enable L2 Cache in U-Boot   Bin Meng
• [PATCH v2] cmd: avb: free partition buffer upon verify completion   Gary Bisson
• [PATCH 11/13] imx8mp: Set default SNSR25C for TMU probe1   sbabic at denx.de
• [PATCH V2 8/8] eQos: Implement the read_rom_hwaddr callback   sbabic at denx.de
• [PATCH] imx8mq_phanbell: Run SPL with caches enabled   sbabic at denx.de
• [PATCH 03/10] imx: imx8qm/qxp: add get_board_serial   sbabic at denx.de
• [PATCH 01/10] imx: imx8qm/qxp: reserving DDR memory for M4   sbabic at denx.de
• [PATCH V2 1/8] net: eth-uclass: add return value check   sbabic at denx.de
• [PATCH 07/14] mxs_nand: Update compatible string for i.MX6SX   sbabic at denx.de
• [PATCH] mtd: nand: raw: mxs_nand changes for nandbcb   sbabic at denx.de
• [PATCH 10/14] nand: mxs_nand: make imx8mm can use hardware BCH and randomizer   sbabic at denx.de
• [PATCH 1/2] misc: fuse: Update imx8 fuse driver for 8QM   sbabic at denx.de
• [PATCH V2 4/6] power: imx8: remove the resource owned check before power off   sbabic at denx.de
• [PATCH 08/14] mtd: nand: mxs_nand: add i.MX6QP compatible string   sbabic at denx.de
• [PATCH 6/6] nandbcb: read boot search count from fuse for imx8qxp   sbabic at denx.de
• [PATCH 09/10] imx: imx8qxp: update fdt_file according to m4 state   sbabic at denx.de
• [PATCH 3/6] nandbcb: add nandbcb dump command for i.MX8MM   sbabic at denx.de
• [PATCH 03/13] thermal: imx_tmu: Add support for thermal sensor on iMX8MM   sbabic at denx.de
• [PATCH 08/13] imx8mm: Load fuse for TMU TCALIV and TASR   sbabic at denx.de
• [PATCH 11/14] mtd: nand: support GPMI NAND driver for i.MX8   sbabic at denx.de
• [PATCH 14/14] nand: enable the Randomizer module for i.mx7 and i.mx8   sbabic at denx.de
• [PATCH 01/14] mtd: gpmi: change the BCH layout setting for large oob NAND   sbabic at denx.de
• [PATCH 05/13] thermal: imx_tmu: Fix for temperature out of range   sbabic at denx.de
• [PATCH V2 6/8] net: eqos: implement callbaks to get interface and set txclk rate   sbabic at denx.de
• [PATCH 04/10] imx: imx8qm/imx8qxp: Power down the resources before SPL jump to u-boot   sbabic at denx.de
• [PATCH V2 3/6] power: imx8-power-domain: Set DM_FLAG_DEFAULT_PD_CTRL_OFF flag   sbabic at denx.de
• [PATCH 01/13] thermal: imx_scu_thermal: Update driver for i.MX8QM thermal sensor   sbabic at denx.de
• Status i.MX U-Boot patches   Stefano Babic
• [PATCH 13/13] imx: cpu: support tmu   sbabic at denx.de
• [PATCH 02/13] thermal: Add thermal driver for i.MX8M   sbabic at denx.de
• [PATCH V2 resend 3/4] usb: mx6: add fuse check   sbabic at denx.de
• [PATCH 2/6] nandbcb: support i.MX8M   sbabic at denx.de
• [PATCH V2 resend 1/4] imx: add module fuse support   sbabic at denx.de
• [PATCH 06/14] nand: Update SPL MXS NAND mini driver   sbabic at denx.de
• [PATCH 02/14] mtd: gpmi: provide the option to use legacy bch geometry   sbabic at denx.de
• [PATCH V2 resend 4/4] net: fec: add fuse check   sbabic at denx.de
• [PATCH 04/14] nand: mxs: correct bitflip for erased NAND page   sbabic at denx.de
• [PATCH 06/10] imx8: Select boot device dynamically   sbabic at denx.de
• [PATCH 4/6] nandbcb: add nandbcb dump command for i.MX6   sbabic at denx.de
• [PATCH V2] ARM: imx: pico-imx8mq: Add support for Technexion Pico-iMX8MQ   sbabic at denx.de
• [PATCH V2 3/8] net: Update eQos driver and FEC driver to use eth phy interfaces   sbabic at denx.de
• [PATCH V2 2/6] imx8: power: Add PD device lookup interface to power domain uclass   sbabic at denx.de
• [PATCH V2 resend 2/4] i2c: mxc: add fuse check   sbabic at denx.de
• [PATCH V2 7/8] fec: Move imx_get_mac_from_fuse declare to imx file   sbabic at denx.de
• [PATCH 05/10] imx: imx8qm/qxp: Recover SPL data section for partition reboot   sbabic at denx.de
• [PATCH 06/13] thermal: imx_tmu: Check the TEMP range for iMX8MM   sbabic at denx.de
• [PATCH 05/14] mxs_nand: Add support for i.MX8M   sbabic at denx.de
• [PATCH 02/10] imx: imx8qm/qxp: Fix issue in get_effective_memsize   sbabic at denx.de
• [PATCH V2 6/6] imx8: Replace SC_R_LAST with SC_R_NONE in DTB   sbabic at denx.de
• [PATCH 12/14] MXS_NAND: Add clock support for iMX8   sbabic at denx.de
• [PATCH 07/10] imx: imx8qm/qxp: check whether m4 partition booted   sbabic at denx.de
• [PATCH 09/14] mtd: mxs_nand: fix the gf_13/14 definition issue   sbabic at denx.de
• [PATCH 07/13] thermal: imx_tmu: support i.MX8MP   sbabic at denx.de
• [PATCH 5/6] cmd: nandbcb: Reconstruct the nandbcb tool for all platforms   sbabic at denx.de
• [PATCH 12/13] imx: regs: add more fuse bank structure   sbabic at denx.de
• [PATCH 09/13] imx: i.MX8MN: Enable loading TASR and TCALIV from fuse   sbabic at denx.de
• [PATCH V2 1/6] dt-bindings: imx_rsrc: add SC_R_NONE   sbabic at denx.de
• [PATCH 2/2] misc: scu: Increase the timeout for MU communication   sbabic at denx.de
• [PATCH 10/10] imx8: cpu: check resource owned after sid fail   sbabic at denx.de
• [PATCH] pinctrl: nxp: scu: Check the pad partition before set pinmux   sbabic at denx.de
• [PATCH V2 2/8] net: Add eth phy generic driver for shared MDIO   sbabic at denx.de
• [PATCH 04/13] thermal: imx_tmu: support TMU arch level initialization   sbabic at denx.de
• [PATCH 08/10] imx: imx8qm: update fdt_file according to m4 state   sbabic at denx.de
• [PATCH V2 5/6] power: imx8: Check owned resource in power on   sbabic at denx.de
• [PATCH 13/14] mxs_nand: don't check zero count when ECC reading with randomizer   sbabic at denx.de
• [PATCH V2 5/8] net: dwc_eth_qos: add dwc eqos for imx support   sbabic at denx.de
• [PATCH 10/13] imx: load calibration parameters from fuse for i.MX8MP   sbabic at denx.de
• [PATCH 1/6] nandbcb: fix the issue cannot support gf_14 NAND boot   sbabic at denx.de
• [PATCH V2] imx: Add support for i.MX8MM Beacon EmbeddedWorks devkit.   sbabic at denx.de
• [PATCH V2 4/8] net: phy: realtek: add rx delay support for RTL8211F   sbabic at denx.de
• [PATCH 03/14] nand: mxs: fix the bitflips for erased page when uncorrectable error   sbabic at denx.de
• [PATCH 2/6] efi_loader: Add headers for EDK2 StandAloneMM communication   Ilias Apalodimas
• [GIT PULL] Pull request: u-boot-imx u-boot-imx-20200511   Stefano Babic
• [PATCH v7 19/22] sifive: dts: fu540: Enable L2 Cache in U-Boot   Pragnesh Patel
• [PATCH v2 1/1] efi_loader: put device tree into EfiACPIReclaimMemory   Heinrich Schuchardt
• [PATCH v2 2/4] regmap: Allow providing read/write callbacks through struct regmap_config   Yadav, Pratyush
• [PATCH V2 1/2] imx: imx8mp_evk: fix boot issue   Fabio Estevam
• [PATCH V2 2/2] imx8mp_evk: simplify board spl code   Fabio Estevam
• [PATCH v2 1/2] arm: mvebu: ds414: add u-boot, dm-pre-reloc to spi0   Stefan Roese
• [PATCH v2 2/2] arm: mvebu: ds414: define CONFIG_SYS_U_BOOT_OFFS   Stefan Roese
• [PATCH V2 1/2] imx: imx8mp_evk: fix boot issue   Peng Fan
• [PATCH V2 2/2] imx8mp_evk: simplify board spl code   Peng Fan
• [GIT PULL] TI changes for v2020.07-rc2   Lokesh Vutla
• [PATCH] configs: ti: Fix usage of undefined variable overlay_files   Lokesh Vutla
• [PATCH] arm: K3: Increase default SYSFW image size allocation   Lokesh Vutla
• [PATCH] net: ethernet: ti: am65-cpsw-nuss: enable 10Mbps link speed in rgmii mode   Lokesh Vutla
• [PATCH v2] video: omap: change include order   Lokesh Vutla
• [PATCH] imx8mp_evk: Add a README file   Fabio Estevam
• [PATCH 00/11] Fixes for Nokia RX-51   Lokesh Vutla
• [PATCH 6/8] net: dwc_eth_qos: Split eqos_start() to get link speed   Patrice CHOTARD
• [PATCH 2/2] odroid-c2: enable USB host controller   Neil Armstrong
• [PATCH v2 0/2] gpio: add gpio open-drain & open-source emulation   Neil Armstrong
• [PATCH 1/2] arm: dts: khadas-vim3: include meson-g12-common-u-boot.dtsi to enable HDMI output   Neil Armstrong
• [PATCH 2/2] configs: khadas-vim3: enable HDMI output   Neil Armstrong
• [PATCH 1/2] tpm: add #ifndef to fix redeclaration build errors   Johannes Holland
• [PATCH 2/2] spi: add support for all spi modes with soft spi   Johannes Holland
• Calling i2c set speed twice for i2c_mux_bus   Michal Simek
• [PING][PATCH] Optionally: Set the serial# environment variable on the i.MX7.   Stefano Babic
• Pull request v2: u-boot-spi/master   Tom Rini
• [PATCH 1/9] arm: stm32mp: spl: add bsec driver in SPL   Patrice CHOTARD
• [Uboot-stm32] [PATCH 2/9] ARM: dts: stm32: add cpufreq support on stm32mp15x   Patrice CHOTARD
• [Uboot-stm32] [PATCH 3/9] board: st: create common file stpmic1.c   Patrice CHOTARD
• [PATCH 4/9] stm32mp1: clk: configure pll1 with OPP   Patrice CHOTARD
• [PATCH 5/9] ARM: stm32: Add board_early_init_f() to SPL   Patrice CHOTARD
• [PATCH 6/9] arm: stm32mp: add weak function to save vddcore   Patrice CHOTARD
• [Uboot-stm32] [PATCH 7/9] board: st: stpmic1: add function stmpic_buck1_set   Patrice CHOTARD
• [Uboot-stm32] [PATCH 8/9] board: stm32mp1: update vddcore in SPL   Patrice CHOTARD
• [Uboot-stm32] [PATCH 9/9] ARM: dts: stm32mp1: use OPP information for PLL1 settings in SPL   Patrice CHOTARD
• [Uboot-stm32] [PATCH v2 07/12] board: stm32mp1: remove bootdelay configuration for usb or serial boot   Patrice CHOTARD
• [Uboot-stm32] [PATCH v2 04/12] board: stm32mp1: update management of boot-led   Patrice CHOTARD
• [PATCH v2 02/12] arm: stm32mp: spl: update error management in board_init_f   Patrice CHOTARD
• [PATCH] clk: stm32mp1: fix CK_MPU calculation   Patrice CHOTARD
• [PATCH 1/5] imx8mm_evk: Select the watchdog driver   Fabio Estevam
• [PATCH 2/5] imx8mn_ddr4_evk: Select the watchdog driver   Fabio Estevam
• [PATCH 3/5] imx8mm_beacon: Select the watchdog driver   Fabio Estevam
• [PATCH 4/5] imx8mp_evk: Select the watchdog driver   Fabio Estevam
• [PATCH 5/5] verdin-imx8mm: Select the watchdog driver   Fabio Estevam
• [PATCH] mmc: stm32_sdmmc2: change the displayed config name   Patrice CHOTARD
• [Uboot-stm32] [PATCH] ARM: dts: stm32mp1: DT alignment with Linux 5.7-rc2   Patrice CHOTARD
• FW: mmc: zynq_sdhci: transfer fails with 8-bit data bus   Benedikt Grassl
• [PATCH 4/8] drivers: ddr: imx8m: add print for DRAM rate   Fabio Estevam
• [PATCH 3/5] imx8mm_beacon: Select the watchdog driver   Adam Ford
• [PATCH 1/2] imx: imx8mp_evk: fix boot issue   Fabio Estevam
• Status i.MX U-Boot patches   Fabio Estevam
• [PATCH 4/8] drivers: ddr: imx8m: add print for DRAM rate   Adam Ford
• Calling i2c set speed twice for i2c_mux_bus   Heiko Schocher
• [PATCH 4/8] drivers: ddr: imx8m: add print for DRAM rate   Stefano Babic
• [PATCH 5/5] verdin-imx8mm: Select the watchdog driver   Igor Opaniuk
• Pull request for UEFI sub-system for efi-2020-07-rc2-4   Heinrich Schuchardt
• [GIT PULL] Pull request: u-boot-imx u-boot-imx-20200511   Tom Rini
• [PATCH v2 2/2] env/sf.c: honour CONFIG_SPL_SAVEENV   Tom Rini
• [PATCH 0/6 v2] EFI variable support via OP-TEE   Ilias Apalodimas
• [PATCH 1/5 v2] efi_loader: Add headers for EDK2 StandAloneMM communication   Ilias Apalodimas
• [PATCH 2/5 v2] efi_loader: Implement EFI variable handling via OP-TEE   Ilias Apalodimas
• [PATCH 3/5 v2] cmd: efidebug: Add support for querying UEFI variable storage   Ilias Apalodimas
• [PATCH 4/5 v2] MAINTAINERS: Add maintainer for EFI variables via OP-TEE   Ilias Apalodimas
• [PATCH 5/5 v2] doc: uefi.rst: Add OP-TEE variable storage config options   Ilias Apalodimas
• [GIT PULL] TI changes for v2020.07-rc2   Tom Rini
• [PATCH 5/5 v2] doc: uefi.rst: Add OP-TEE variable storage config options   Heinrich Schuchardt
• [PATCH 4/5 v2] MAINTAINERS: Add maintainer for EFI variables via OP-TEE   Heinrich Schuchardt
• [PATCH 1/1] tools: ftdgrep: use /* fallthrough */ as needed   Tom Rini
• [PATCH 3/5 v2] cmd: efidebug: Add support for querying UEFI variable storage   Heinrich Schuchardt
• [PATCH v3 7/9] rockchip: dts: rk3328: Sync device tree files from Linux   Kurt Miller
• [PATCH 1/1] tools: ftdgrep: use /* fallthrough */ as needed   Heinrich Schuchardt
• Setting up test.py for a platform with 2 U-Boots?   Tom Rini
• [PATCH V2] mkimage: fit: Do not tail-pad fitImage with external data   Tom Rini
• [PATCH 1/5 v2] efi_loader: Add headers for EDK2 StandAloneMM communication   Heinrich Schuchardt
• [RFC] am65x_evm_r5: Disable serial output   Tom Rini
• [PATCH v2 06/10] rpi4: add a mapping for the PCIe XHCI controller MMIO registers (ARM 32bit)   Tom Rini
• [PATCH v2 06/10] rpi4: add a mapping for the PCIe XHCI controller MMIO registers (ARM 32bit)   Matthias Brugger
• [PATCH] kbuild: add -Werror=implicit-function-declaration   Simon Glass
• [PATCH v2 2/4] regmap: Allow providing read/write callbacks through struct regmap_config   Simon Glass
• Calling i2c set speed twice for i2c_mux_bus   Simon Glass
• [PATCH v3 11/22] common: Drop init.h from common header   Simon Glass
• [PATCH v3 21/22] Use __ASSEMBLY__ as the assembly macros   Simon Glass
• [PATCH] kbuild: add -Werror=implicit-function-declaration   Tom Rini
• [PATCH v3 21/22] Use __ASSEMBLY__ as the assembly macros   Tom Rini
• Pull request for UEFI sub-system for efi-2020-07-rc2-4   Tom Rini
• [ANN] U-Boot v2020.07-rc2 released   Tom Rini
• [PATCH 3/8] imx8mp: ddr: Add inline ECC feature support   Fabio Estevam
• [PATCH v4 0/5] TI Ethernet PHY changes   Dan Murphy
• [PATCH 4/8] drivers: ddr: imx8m: add print for DRAM rate   Peng Fan
• [PATCH 3/8] imx8mp: ddr: Add inline ECC feature support   Peng Fan
• [PATCH 1/2] imx: imx8mp_evk: fix boot issue   Peng Fan
• [PATCH v4 12/16] usb: dwc3: add make compatible for rockchip platform   Frank Wang
• [PATCH v7 19/22] sifive: dts: fu540: Enable L2 Cache in U-Boot   Bin Meng
• [PATCH 1/2] imx: imx8mp_evk: fix boot issue   Peng Fan
• Coreboot tests in gitlab?   Simon Glass
• [PATCH V2 0/7] imx: drivers: ddr: ddr driver update   Peng Fan
• [PATCH V2 1/7] driver: ddr: imx: skip ddr_ss_gpr config on imx8mn   Peng Fan
• [PATCH V2 2/7] driver: ddr: imx: correct the pwrctl setting of selfref_en on imx8m   Peng Fan
• [PATCH V2 3/7] drivers: ddr: imx8mp: Add inline ECC feature support   Peng Fan
• [PATCH] usb: max3420: add the gadget driver   Jassi Brar
• [PATCH 6/8] net: dwc_eth_qos: Split eqos_start() to get link speed   David Wu
• Coreboot tests in gitlab?   Bin Meng
• [PATCH 1/1] tools: mkimage: use /* fallthrough */ as needed   Punit Agrawal
• [PATCH v2 00/35] dm: Add programmatic generation of ACPI tables (part B)   Bin Meng
• mmc: zynq_sdhci: transfer fails with 8-bit data bus   Michal Simek
• [PATCH 3/5 v2] cmd: efidebug: Add support for querying UEFI variable storage   Ilias Apalodimas
• [PATCH 1/5 v2] efi_loader: Add headers for EDK2 StandAloneMM communication   Ilias Apalodimas
• [PATCH 1/5 v2] efi_loader: Add headers for EDK2 StandAloneMM communication   Ilias Apalodimas
• [PATCH] configs: ls1046a: Define ENV_ADDR value   Priyanka Jain (OSS)
• [GIT PULL] TI changes for v2020.07-rc2   Vignesh Raghavendra
• [RFC] am65x_evm_r5: Disable serial output   Lokesh Vutla
• [PATCH] arm64: versal: Let U-Boot to update memory node by default   Michal Simek
• [PATCH] clk: versal: Remove alt_ref_clk from clock sources   Michal Simek
• [PATCH] firmware: zynqmp: Change panic logic in zynqmp_pmufw_load_config_object()   Michal Simek
• [PATCH v3 1/2] sandbox, test: add test for GPIO_HOG function   Heiko Schocher
• [PATCH] configs: ls1046a: Define ENV_ADDR value   Kuldeep Singh
• [PATCH] usb: dwc3: Add versal compatibility string to dwc3 glue ids   Michal Simek
• [EXT] Re: [Patch v4] net: pfe_eth: Use spi_flash_read API to access flash memory   Priyanka Jain (OSS)
• [PATCH 0/5] fpga: zynqpl: Add support for AES engine   Michal Simek
• [PATCH 1/5] fpga: zynqpl: Correct PL bitstream loading sequence for zynqaes   Michal Simek
• [PATCH 2/5] fpga: zynqpl: Check fpga config completion   Michal Simek
• [PATCH 3/5] fpga: zynqpl: Check if aes engine is enabled   Michal Simek
• [PATCH 4/5] fpga: zynqpl: Flush dcache only for non-bitstream data   Michal Simek
• [PATCH 5/5] fpga: zynqpl: Add zynq aes load & loadp commands   Michal Simek
• [PATCH 0/5] xilinx: DT/Kconfig changes   Michal Simek
• [PATCH 1/5] arm: zynq: Enable alternative memory test   Michal Simek
• [PATCH 2/5] arm64: versal: Enable config to map TCM and OCM   Michal Simek
• [PATCH 3/5] arm64: zynqmp: Reduce console buffer size   Michal Simek
• [PATCH 4/5] arm64: zynqmp: Fix si570 clock output names and references   Michal Simek
• [PATCH 5/5] arm64: zynqmp: Change spi-max-frequency for qspi mini   Michal Simek
• [PATCH v4 12/16] usb: dwc3: add make compatible for rockchip platform   Marek Vasut
• [PATCH] usb: dwc3: Add versal compatibility string to dwc3 glue ids   Marek Vasut
• [PATCH v3 1/2] sandbox, test: add test for GPIO_HOG function   Heiko Schocher
• [PATCH v3 0/3] Move FSP configuration to devicetree   Bernhard Messerklinger
• [PATCH v3 1/3] arch: x86: apl: Only load VBT if CONFIG_HAVE_VBT is enabled   Bernhard Messerklinger
• [PATCH v3 2/3] arch: x86: apl: Use devicetree for FSP-M configuration   Bernhard Messerklinger
• [PATCH v3 3/3] arch: x86: apl: Use devicetree for FSP-S configuration   Bernhard Messerklinger
• [PATCH v7 19/22] sifive: dts: fu540: Enable L2 Cache in U-Boot   Jagan Teki
• [PATCH v1 0/2] add brcm iproc pcie driver   Rayagonda Kokatanur
• [PATCH v1 1/2] drivers: pci: add api to get dma regions   Rayagonda Kokatanur
• [PATCH v1 2/2] drivers: pcie: add Broadcom IPROC PCIe RC driver   Rayagonda Kokatanur
• [PATCH v2 00/11] Add dwc_eth_qos support for rockchip   Patrice CHOTARD
• [PATCH 1/3] cmd: optee_rpmb command for read/write of rpmb from optee   Priyanka Jain (OSS)
• [PATCH 3/3] configs: lx2160a: Enable OPTEE support   Priyanka Jain (OSS)
• [PATCH] firmware: zynqmp: Change panic logic in zynqmp_pmufw_load_config_object()   Luca Ceresoli
• [PATCH 01/29] dts: P1020: Add ESPI DT nodes   Priyanka Jain
• [PATCH v6 1/4] dm: spi: Convert Freescale ESPI driver to driver model   Priyanka Jain
• raspberrypi cm3 v2019.07 not working   Belisko Marek
• [PATCH] armv8: ls1012a: Pass PPFE firmware to Linux through FDT.   Priyanka Jain (OSS)
• [PULL u-boot] Please pull u-boot-amlogic-20200511   Neil Armstrong
• [PATCH V2 0/5] imx8mp: evk: fix boot and update   Peng Fan
• [PATCH V2 1/5] imx8mp_evk: spl: drop useless code   Peng Fan
• [PATCH V2 2/5] imx8mp_evk: spl: drop timer_init   Peng Fan
• [PATCH V2 3/5] imx8mp_evk: spl: use spl_early_init   Peng Fan
• [PATCH V2 4/5] imx8mp_evk: spl: no need the code since spl framework could do that   Peng Fan
• [PATCH V2 5/5] imx: imx8mp_evk: fix boot issue   Peng Fan
• [PATCH 2/5] spl: romapi: avoid copy data when get fit image size   Peng Fan
• [PATCH 0/5] spl: imx: update and fix   Peng Fan
• [PATCH 1/5] spl: romapi: Fix issue for stream mode with secure boot enabled   Peng Fan
• [PATCH 2/5] spl: romapi: avoid copy data when get fit image size   Peng Fan
• [PATCH 3/5] spl: imx: Change USB boot device type   Peng Fan
• [PATCH 4/5] spl: imx8m: add QSPI boot dev   Peng Fan
• [PATCH 5/5] spl: fit: remove useless CONFIG_IMX_HAB   Peng Fan
• [PATCH 0/5] spl: imx: update and fix   Peng Fan
• [PATCH] MAINTAINERS: add QorIQ DPAA   Priyanka Jain
• [RESEND PATCH v2 00/11] Add dwc_eth_qos support for rockchip   David Wu
• [RESEND PATCH v2 01/11] net: dwc_eth_qos: Use dev_ functions calls to get FDT data   David Wu
• [RESEND PATCH v2 02/11] net: dwc_eth_qos: Add option "snps, reset-gpio" phy-rst gpio for stm32   David Wu
• [RESEND PATCH v2 03/11] net: dwc_eth_qos: Move interface() to eqos_ops structure   David Wu
• [RESEND PATCH v2 04/11] net: dwc_eth_qos: Make clk_rx and clk_tx optional   David Wu
• [RESEND PATCH v2 05/11] net: dwc_eth_qos: Split eqos_start() to get link speed   David Wu
• [RESEND PATCH v2 06/11] net: dwc_eth_qos: make eqos_start_clks and eqos_stop_clks optional   David Wu
• [RESEND PATCH v2 07/11] net: dwc_eth_qos: Export common struct and interface at head file   David Wu
• [RESEND PATCH v2 08/11] net: gmac_rockchip: Add dwc_eth_qos support   David Wu
• [RESEND PATCH v2 09/11] net: dwc_eth_qos: Add eqos_rockchip_ops   David Wu
• [RESEND PATCH v2 10/11] net: dwc_eth_qos: Add EQOS_MAC_MDIO_ADDRESS_CR_100_150 for Rockchip   David Wu
• [RESEND PATCH v2 11/11] net: gmac_rockchip: Add RV1126 gmac support   David Wu
• [PATCH v2 00/11] Add dwc_eth_qos support for rockchip   David Wu
• [PATCH 1/2] mmc: sdhci: Use debug for not supported SDMA info message   matthias.bgg at kernel.org
• [PATCH 2/2] configs: rpi_arm64: enable SDHCI SDMA support   matthias.bgg at kernel.org
• [PATCH] arch: arm: uDPU: fix PHY mode definition to sgmii-2500   Jakov Petrina
• [PATCH 3/3] configs: ls2080aqds_tfa_defconfig: enable DM_ETH and related   Priyanka Jain (OSS)
• [PATCH 3/3] configs: ls2080aqds_tfa_defconfig: enable DM_ETH and related   Ioana Ciornei
• [PATCH] configs: rpi_arm64: sync env size with rpi_{3,4}_defconfig   Matthias Brugger
• [Patch V4 0/3] Support SDMA mode on RPI4 target - 32bit   Matthias Brugger
• [PATCH] rpi_4_defconfig: add missing CONFIG_ARCH_FIXUP_FDT_MEMORY   Matthias Brugger
• [Patch v2] configs: ls1046a: Define ENV_ADDR value   Kuldeep Singh
• [PATCH v2 06/10] rpi4: add a mapping for the PCIe XHCI controller MMIO registers (ARM 32bit)   Sylwester Nawrocki
• [PATCH 1/2] rockchip: spl: do full dram_init instead of only probing   Heiko Stuebner
• [PATCH 2/2] spl: add fixed memory node in target fdt also when loading ATF   Heiko Stuebner
• raspberrypi cm3 v2019.07 not working   Matthias Brugger
• raspberrypi cm3 v2019.07 not working   Belisko Marek
• [PATCH v2 17/39] bdinfo: arc: Use the generic bd command   Alexey Brodkin
• raspberrypi cm3 v2019.07 not working   Matthias Brugger
• [PATCH] rpi_4_defconfig: add missing CONFIG_ARCH_FIXUP_FDT_MEMORY   LABBE Corentin
• [PATCH] MAINTAINERS: add QorIQ DPAA   Madalin Bucur (OSS)
• raspberrypi cm3 v2019.07 not working   Belisko Marek
• [PATCH] rpi_4_defconfig: add missing CONFIG_ARCH_FIXUP_FDT_MEMORY   Matthias Brugger
• raspberrypi cm3 v2019.07 not working   Matthias Brugger
• [PATCH V2 1/5] imx8mp_evk: spl: drop useless code   Fabio Estevam
• [PATCH 1/2] imx: imx8mp_evk: fix boot issue   Fabio Estevam
• raspberrypi cm3 v2019.07 not working   Matthias Brugger
• Antwort: Re: [PATCH v2 00/35] dm: Add programmatic generation of ACPI tables (part B)   Wolfgang Wallner
• [PATCH V2 1/5] imx8mp_evk: spl: drop useless code   Peng Fan
• [PATCH] dt-bindings: vendor-prefixes: Add U-Boot bootloader prefix   Linus Walleij
• [PATCH v2 06/10] rpi4: add a mapping for the PCIe XHCI controller MMIO registers (ARM 32bit)   Marek Szyprowski
• [GIT PULL] TI changes for v2020.07-rc2   Tom Rini
• [PATCH V2 1/5] imx8mp_evk: spl: drop useless code   Fabio Estevam
• [RFC] am65x_evm_r5: Disable serial output   Tom Rini
• Antwort: [PATCH v2] test: Use ut_asserteq_mem() where possible   Wolfgang Wallner
• Antwort: Re: [PATCH v2 00/35] dm: Add programmatic generation of ACPI tables (part B)   Andy Shevchenko
• [PATCH 1/2] mmc: sdhci: Use debug for not supported SDMA info message   Peng Fan
• [PATCH 2/2] configs: rpi_arm64: enable SDHCI SDMA support   Peng Fan
• [PATCH v4 0/3] gpio: add possibility to search for gpio label name   Heiko Schocher
• [PATCH v4 1/3] gpio-uclass.c: save the GPIOD flags also in the gpio descriptor   Heiko Schocher
• [PATCH v4 2/3] sandbox, test: add test for GPIO_HOG function   Heiko Schocher
• [PATCH v4 3/3] gpio: search for gpio label if gpio is not found through bank name   Heiko Schocher
• [PATCH 1/1] imx: rom api: fix image offset computation   Sébastien Szymanski
• [PATCH v2] cmd: avb: free partition buffer upon verify completion   Igor Opaniuk
• [RFC PATCH 0/2] ARM: arbitrary virtual-physical mappings for RPi4 XHCI support   Marek Szyprowski
• [RFC PATCH 1/2] arm: provide a function for boards init code to modify MMU virtual-physical map   Marek Szyprowski
• [RFC PATCH 2/2] rpi4: add a mapping for the PCIe XHCI controller MMIO registers (ARM 32bit)   Marek Szyprowski
• [ANN] U-Boot v2020.07-rc2 released   Heiko Schocher
• [PATCH v2 1/1] efi_loader: put device tree into EfiACPIReclaimMemory   Grant Likely
• [PATCH v1 5/7] arm: dts: s700: add node for ethernet controller   André Przywara
• [PATCH v1 5/7] arm: dts: s700: add node for ethernet controller   Tom Rini
• [PATCH v3 2/7] uart: pl011: Add proper DM clock support   André Przywara
• [PATCH v1 5/7] arm: dts: s700: add node for ethernet controller   Amit Tomer
• [PATCH v1 5/7] arm: dts: s700: add node for ethernet controller   Amit Tomer
• [PATCH v1 5/7] arm: dts: s700: add node for ethernet controller   Tom Rini
• [PATCH v1 5/7] arm: dts: s700: add node for ethernet controller   André Przywara
• [PATCH v1 5/7] arm: dts: s700: add node for ethernet controller   André Przywara
• [PATCH v1 5/7] arm: dts: s700: add node for ethernet controller   Tom Rini
• [RFC PATCH 1/2] arm: provide a function for boards init code to modify MMU virtual-physical map   Sylwester Nawrocki
• [PATCH] dt-bindings: vendor-prefixes: Add U-Boot bootloader prefix   Rob Herring
• [PATCH v1 5/7] arm: dts: s700: add node for ethernet controller   Amit Tomer
• [PATCH v1 5/7] arm: dts: s700: add node for ethernet controller   André Przywara
• [PATCH v2 09/10] pci: Add driver for Broadcom STB PCIe controller   Sylwester Nawrocki
• [PATCH v3 00/17] mtd: spi-nor-core: add xSPI Octal DTR support   Jagan Teki
• [PATCH v2 09/10] pci: Add driver for Broadcom STB PCIe controller   Jim Quinlan
• [PATCH] ARM: dts: stm32: Synchronize DDR setttings on DH SoMs   Marek Vasut
• [PATCH 1/1] imx: rom api: fix image offset computation   Patrick Wildt
• [PATCH 1/2] [RFC] ARM: stm32: Make bsec available in SPL   Marek Vasut
• [PATCH 2/2] [RFC] clk: stm32mp1: Handle SoC speed grade configs   Marek Vasut
• [PATCH v1 1/2] driver: spi: add brcm iproc qspi support.   Jagan Teki
• [PATCH v3 00/17] mtd: spi-nor-core: add xSPI Octal DTR support   Pratyush Yadav
• [PATCH] phy: sun4i-usb: Align H6 initialization logic with the kernel   Roman Stratiienko
• [PULL] u-boot-usb/master   Marek Vasut
• [PATCH v3 0/9] USB host support for Raspberry Pi 4 board (64-bit)   Sylwester Nawrocki
• [PATCH v3 1/9] usb: xhci: Add missing cache flush in the scratchpad array initialization   Sylwester Nawrocki
• [PATCH v3 2/9] usb: xhci: Use only 32-bit accesses in xhci_writeq/xhci_readq   Sylwester Nawrocki
• [PATCH v3 3/9] pci: Move some PCIe register offset definitions to a common header   Sylwester Nawrocki
• [PATCH v3 4/9] rpi4: shorten a mapping for the DRAM   Sylwester Nawrocki
• [PATCH v3 5/9] rpi4: add a mapping for the PCIe XHCI controller MMIO registers (ARM 64bit)   Sylwester Nawrocki
• [PATCH v3 6/9] linux/bitfield.h: Add primitives for manipulating bitfields both in host- and fixed-endian   Sylwester Nawrocki
• [PATCH v3 7/9] pci: Add some PCI Express capability register offset definitions   Sylwester Nawrocki
• [PATCH v3 8/9] pci: Add driver for Broadcom BCM2711 SoC PCIe controller   Sylwester Nawrocki
• [PATCH v3 9/9] configs: Enable support for the XHCI controller on RPI4 board (ARM 64-bit)   Sylwester Nawrocki
• [RESEND PATCH v3 6/9] linux/bitfield.h: Add primitives for manipulating bitfields both in host- and fixed-endian   Sylwester Nawrocki
• [PPC] Internet connection on qemu-ppce500   kosai1111
• [PATCH][v4 6/6] board: tbs2910: add documentation   Soeren Moch
• [PATCH v1 5/7] arm: dts: s700: add node for ethernet controller   Tom Rini
• [PULL u-boot] Please pull u-boot-amlogic-20200511   Tom Rini
• raspberrypi cm3 v2019.07 not working   Belisko Marek
• [PULL] u-boot-usb/master   Tom Rini
• [PATCH 1/4] clk: clk-imx8mm: Add flexspi clock and fix set parent   Adam Ford
• [PATCH 1/4] clk: clk-imx8mm: Add flexspi clock and fix set parent   Fabio Estevam
• Antwort: Re: [PATCH v2 00/35] dm: Add programmatic generation of ACPI tables (part B)   Simon Glass
• U-CLASS SPI Bus and Devices   Rudolf J Streif
• [PATCH v4 12/16] usb: dwc3: add make compatible for rockchip platform   Frank Wang
• [PATCH v1 1/2] drivers: pci: add api to get dma regions   Simon Glass
• [PATCH v1 2/2] drivers: pcie: add Broadcom IPROC PCIe RC driver   Simon Glass
• [PATCH v1 2/2] drivers: pcie: add Broadcom IPROC PCIe RC driver   Rayagonda Kokatanur
• [PATCH v1 2/2] drivers: pcie: add Broadcom IPROC PCIe RC driver   Simon Glass
• [PATCH 1/1] tools: ftdgrep: use /* fallthrough */ as needed   Tom Rini
• [ANN] U-Boot v2020.07-rc2 released   Heiko Schocher
• [PATCH] MAINTAINERS: POWERPC MPC8XX: Update email address   Christophe Leroy
• [ANN] U-Boot v2020.07-rc2 released   Heinrich Schuchardt
• [ANN] U-Boot v2020.07-rc2 released   Heiko Schocher
• [PATCH 2/5 v2] efi_loader: Implement EFI variable handling via OP-TEE   Heinrich Schuchardt
• [PATCH v9 00/18] RISC-V SiFive FU540 support SPL   Pragnesh Patel
• [PATCH v9 01/18] misc: add driver for the SiFive otp controller   Pragnesh Patel
• [PATCH v9 02/18] riscv: sifive: fu540: Use OTP DM driver for serial environment variable   Pragnesh Patel
• [PATCH v9 03/18] riscv: Add _image_binary_end for SPL   Pragnesh Patel
• [PATCH v9 04/18] lib: Makefile: build crc7.c when CONFIG_MMC_SPI   Pragnesh Patel
• [PATCH v9 05/18] riscv: sifive: dts: fu540: Add board -u-boot.dtsi files   Pragnesh Patel
• [PATCH v9 06/18] sifive: fu540: add ddr driver   Pragnesh Patel
• [PATCH v9 07/18] sifive: dts: fu540: Add DDR controller and phy register settings   Pragnesh Patel
• [PATCH v9 08/18] riscv: sifive: dts: fu540: add U-Boot dmc node   Pragnesh Patel
• [PATCH v9 09/18] clk: sifive: fu540-prci: Add clock enable and disable ops   Pragnesh Patel
• [PATCH v9 10/18] clk: sifive: fu540-prci: Add ddr clock initialization   Pragnesh Patel
• [PATCH v9 11/18] clk: sifive: fu540-prci: release ethernet clock reset   Pragnesh Patel
• [PATCH v9 12/18] riscv: dts: sifive: Sync hifive-unleashed-a00 dts from linux   Pragnesh Patel
• [PATCH v9 13/18] riscv: cpu: fu540: Add support for cpu fu540   Pragnesh Patel
• [PATCH v9 14/18] riscv: sifive: fu540: add SPL configuration   Pragnesh Patel
• [PATCH v9 15/18] sifive: fu540: Add sample SD gpt partition layout   Pragnesh Patel
• [PATCH v9 16/18] sifive: fu540: Add U-Boot proper sector start   Pragnesh Patel
• [PATCH v9 17/18] configs: fu540: Add config options for U-Boot SPL   Pragnesh Patel
• [PATCH v9 18/18] doc: sifive: fu540: Add description for OpenSBI generic platform   Pragnesh Patel
• [PATCH v3 14/17] mtd: spi-nor-core: Perform a Soft Reset on shutdown   Jagan Teki
• [PATCH v3 15/17] mtd: spi-nor-core: Perform a Soft Reset on boot   Jagan Teki
• [PATCH v9 11/18] clk: sifive: fu540-prci: release ethernet clock reset   Jagan Teki
• [PATCH v5 00/16] Add Rockchip RK3399 USB3.0 Host support   Frank Wang
• [PATCH v5 01/16] clk: rk3399: Enable/Disable the USB2PHY clk   Frank Wang
• [PATCH v5 02/16] clk: rk3399: Set empty for TCPHY assigned-clocks   Frank Wang
• [PATCH v5 03/16] clk: rk3399: Enable/Disable TCPHY clocks   Frank Wang
• [PATCH v5 04/16] phy: rockchip: Add Rockchip USB2PHY driver   Frank Wang
• [PATCH v5 05/16] arm64: dts: rk3399: Move u2phy into root port   Frank Wang
• [PATCH v5 06/16] phy: rockchip: Add Rockchip USB TypeC PHY driver   Frank Wang
• [PATCH v5 07/16] usb: dwc3: add dis_enblslpm_quirk   Frank Wang
• [PATCH v5 08/16] usb: dwc3: add dis_u2_freeclk_exists_quirk   Frank Wang
• [PATCH v5 09/16] usb: dwc3: Add disable u2mac linestate check quirk   Frank Wang
• [PATCH v5 10/16] usb: dwc3: Enable AutoRetry feature in the controller   Frank Wang
• [PATCH v5 11/16] usb: dwc3: amend UTMI/UTMIW phy interface setup   Frank Wang
• [PATCH v5 12/16] usb: dwc3: add make compatible for rockchip platform   Frank Wang
• [PATCH v5 13/16] driver: usb: drop legacy rockchip xhci driver   Frank Wang
• [PATCH v5 14/16] ARM: dts: rk3399-evb: usb3.0 host support   Frank Wang
• [PATCH v5 15/16] configs: evb-rk3399: update support usb3.0 host   Frank Wang
• [PATCH v5 16/16] roc-rk3399-pc: Enable USB3.0 Host   Frank Wang
• [PATCH v9 11/18] clk: sifive: fu540-prci: release ethernet clock reset   Pragnesh Patel
• [PATCH v9 11/18] clk: sifive: fu540-prci: release ethernet clock reset   Jagan Teki
• [PATCH v9 11/18] clk: sifive: fu540-prci: release ethernet clock reset   Pragnesh Patel
• [PATCH v2] rpi_4_defconfig: add missing CONFIG_ARCH_FIXUP_FDT_MEMORY   Corentin Labbe
• [RESEND PATCH v2 01/11] net: dwc_eth_qos: Use dev_ functions calls to get FDT data   Patrice CHOTARD
• [PATCH 2/5 v2] efi_loader: Implement EFI variable handling via OP-TEE   Ilias Apalodimas
• [RESEND PATCH v2 02/11] net: dwc_eth_qos: Add option "snps,reset-gpio" phy-rst gpio for stm32   Patrice CHOTARD
• [RESEND PATCH v2 03/11] net: dwc_eth_qos: Move interface() to eqos_ops structure   Patrice CHOTARD
• [RESEND PATCH v2 04/11] net: dwc_eth_qos: Make clk_rx and clk_tx optional   Patrice CHOTARD
• [RESEND PATCH v2 05/11] net: dwc_eth_qos: Split eqos_start() to get link speed   Patrice CHOTARD
• [RESEND PATCH v2 06/11] net: dwc_eth_qos: make eqos_start_clks and eqos_stop_clks optional   Patrice CHOTARD
• [RESEND PATCH v2 07/11] net: dwc_eth_qos: Export common struct and interface at head file   Patrice CHOTARD
• [RESEND PATCH v2 09/11] net: dwc_eth_qos: Add eqos_rockchip_ops   Patrice CHOTARD
• [RESEND PATCH v2 10/11] net: dwc_eth_qos: Add EQOS_MAC_MDIO_ADDRESS_CR_100_150 for Rockchip   Patrice CHOTARD
• [PATCH v3 15/17] mtd: spi-nor-core: Perform a Soft Reset on boot   Pratyush Yadav
• [PATCH 1/2] arm: dts: khadas-vim3: include meson-g12-common-u-boot.dtsi to enable HDMI output   Neil Armstrong
• [PATCH 2/2] configs: khadas-vim3: enable HDMI output   Neil Armstrong
• [PATCH 1/2] [RFC] ARM: stm32: Make bsec available in SPL   Patrick DELAUNAY
• [PATCH v9 04/18] lib: Makefile: build crc7.c when CONFIG_MMC_SPI   Heinrich Schuchardt
• [PATCH 2/2] [RFC] clk: stm32mp1: Handle SoC speed grade configs   Patrick DELAUNAY
• [PATCH] regulator: fix: enable gpio when requested   Mark Kettenis
• [PATCH v3 9/9] configs: Enable support for the XHCI controller on RPI4 board (ARM 64-bit)   Sylwester Nawrocki
• [PATCH] ARM: dts: stm32: Synchronize DDR setttings on DH SoMs   Patrick DELAUNAY
• Antwort: Re: [PATCH v2 00/35] dm: Add programmatic generation of ACPI tables (part B)   Andy Shevchenko
• [PATCH v3 15/17] mtd: spi-nor-core: Perform a Soft Reset on boot   Jagan Teki
• [PATCH] net: dwc_eth_qos: Pad descriptors to cacheline size   Patrick DELAUNAY
• [PATCH] lib: rsa: avoid overriding the object name when already specified   Bastian Krause
• [PATCH v2] rpi_4_defconfig: add missing CONFIG_ARCH_FIXUP_FDT_MEMORY   Matthias Brugger
• [PATCH 2/2] [RFC] clk: stm32mp1: Handle SoC speed grade configs   Marek Vasut
• [PATCH v3 15/17] mtd: spi-nor-core: Perform a Soft Reset on boot   Pratyush Yadav
• [PATCH v4 12/16] usb: dwc3: add make compatible for rockchip platform   Marek Vasut
• [PATCH v2] rpi_4_defconfig: add missing CONFIG_ARCH_FIXUP_FDT_MEMORY   LABBE Corentin
• [PATCH 1/2] mmc: sdhci: Use debug for not supported SDMA info message   Matthias Brugger
• [PATCH 2/2] configs: rpi_arm64: enable SDHCI SDMA support   Matthias Brugger
• [PATCH] stm32mp1: Fix warning display when 1.5A power supply is used   Patrick DELAUNAY
• [PATCH 1/2] rpi: Kconfig option for initial page reservation   Matthias Brugger
• [PATCH 2/2] rpi: use the newly-added RPI_EFI_NR_SPIN_PAGES   Matthias Brugger
• Antwort: [PATCH v2 03/35] acpi: Add a way to check device status   Wolfgang Wallner
• [PATCH 2/2] [RFC] clk: stm32mp1: Handle SoC speed grade configs   Patrick DELAUNAY
• [PATCH 0/4] mach-sunxi: sunxi SPI-NAND-SPL   Benedikt-Alexander Mokroß
• [PATCH] ARM: dts: stm32: Synchronize DDR setttings on DH SoMs   Patrick DELAUNAY
• [PATCH] ARM: dts: stm32: Synchronize DDR setttings on DH SoMs   Marek Vasut
• [PATCH 2/2] [RFC] clk: stm32mp1: Handle SoC speed grade configs   Marek Vasut
• USB gadget ethernet status ?   Joakim Tjernlund
• [PATCH v1 01/10] mips: octeon: Initial minimal support for the Marvell Octeon SoC   Daniel Schwierzeck
• [RESEND PATCH v2 02/11] net: dwc_eth_qos: Add option "snps,reset-gpio" phy-rst gpio for stm32   Patrick DELAUNAY
• Using a 'cpu' command to print CPU information   Ivan Kapaev
• [PATCH v3 0/2] usb: xhci: Load Raspberry Pi 4 VL805's firmware   Nicolas Saenz Julienne
• [RESEND PATCH v2 01/11] net: dwc_eth_qos: Use dev_ functions calls to get FDT data   Patrick DELAUNAY
• [PATCH v1 02/10] mips: cache: Allow using CONFIG_MIPS_L2_CACHE without CONFIG_MIPS_CM   Daniel Schwierzeck
• [RESEND PATCH v2 01/11] net: dwc_eth_qos: Use dev_ functions calls to get FDT data   Marek Vasut
• Antwort: [PATCH v2 04/35] irq: Add a method to convert an interrupt to ACPI   Wolfgang Wallner
• [PATCH] lib: rsa: avoid overriding the object name when already specified   George McCollister
• [PATCH v1 03/10] mips: cache: Don't use cache operations with CONFIG_MIPS_CACHE_COHERENT   Daniel Schwierzeck
• [PATCH v1 04/10] mips: traps: Set WG bit in EBase register on Octeon   Daniel Schwierzeck
• [PATCH v1 05/10] mips: Rename CONFIG_CPU_CAVIUM_OCTEON to CONFIG_CPU_MIPS64_OCTEON   Daniel Schwierzeck
• [RESEND PATCH v2 04/11] net: dwc_eth_qos: Make clk_rx and clk_tx optional   Patrick DELAUNAY
• [RESEND PATCH v2 04/11] net: dwc_eth_qos: Make clk_rx and clk_tx optional   Marek Vasut
• [PATCH] BDINFO: ARC: print info about relocations   Alexey Brodkin
• [PATCH v2 1/1] imx: rom api: fix image offset computation   Sébastien Szymanski
• [PATCH 00/13] x86: cbfs: Various clean-ups to CBFS implementation   Simon Glass
• [PATCH 01/13] cbfs: Rename the result variable   Simon Glass
• [PATCH 02/13] cbfs: Use ulong consistently   Simon Glass
• [PATCH 03/13] cbfs: Use bool type for whether initialised   Simon Glass
• [PATCH 04/13] cbfs: Adjust return value of file_cbfs_next_file()   Simon Glass
• [PATCH 05/13] cbfs: Adjust file_cbfs_load_header() to use cbfs_priv   Simon Glass
• [PATCH 06/13] cbfs: Adjust cbfs_load_header_ptr() to use cbfs_priv   Simon Glass
• [PATCH 07/13] cbfs: Unify the two header loaders   Simon Glass
• [PATCH 08/13] cbfs: Use void * for the position pointers   Simon Glass
• [PATCH 09/13] cbfs: Record the start address in cbfs_priv   Simon Glass
• [PATCH 10/13] cbfs: Return the error code from file_cbfs_init()   Simon Glass
• [PATCH 11/13] cbfs: Change file_cbfs_find_uncached() to return an error   Simon Glass
• [PATCH 12/13] cbfs: Allow reading a file from a CBFS given its base addr   Simon Glass
• [PATCH 13/13] cbfs: Don't require the CBFS size with cbfs_init_mem()   Simon Glass
• [PATCH 1/1] tools: ftdgrep: use /* fallthrough */ as needed   Tom Rini
• [PATCH v1 10/10] mips: octeon: Add minimal Octeon 3 EBB7304 EVK support   Daniel Schwierzeck
• [ANN] U-Boot v2020.07-rc2 released   Tom Rini
• [ANN] U-Boot v2020.07-rc2 released   Marek Vasut
• [ANN] U-Boot v2020.07-rc2 released   Tom Rini
• [PATCH v1 08/10] sysreset: Add Octeon sysreset driver   Daniel Schwierzeck
• [PATCH v3 1/1] cmd: gpt: add eMMC and GPT support   Rayagonda Kokatanur
• [U-Boot] Please pull ARC fixes for v2020.07-rc3   Alexey Brodkin
• [PATCH] imx: Update MTD partitions layout for display5 (i.MX6Q) board   Lukasz Majewski
• [PATCH 1/1] tools: ftdgrep: use /* fallthrough */ as needed   Masahiro Yamada
• [PATCH 1/1] tools: ftdgrep: use /* fallthrough */ as needed   Tom Rini
• [PATCH] usb: max3420: add the gadget driver   Marek Vasut
• [PATCH 8/9] board: stm32mp1: update vddcore in SPL   Patrick DELAUNAY
• [PATCH 2/2] rpi: use the newly-added RPI_EFI_NR_SPIN_PAGES   Kyle Evans
• [PATCH 1/1] tools: ftdgrep: use /* fallthrough */ as needed   Masahiro Yamada
• [PATCH 1/1] tools: ftdgrep: use /* fallthrough */ as needed   Tom Rini
• [PATCH 0/4] Making veyrons boot, 2020 edition   Urja Rannikko
• [PATCH 1/4] rockchip: spl: veyron speedy boots from SPI   Urja Rannikko
• [PATCH 2/4] rockchip: veyron: move board_early_init_f to _r (after reloc)   Urja Rannikko
• [PATCH 3/4] rockchip: spl-boot-order: do not attempt to access fdt if OF_PLATDATA   Urja Rannikko
• [PATCH 4/4] defconfig: veyron: no need for CONFIG_SPL_PINCTRL_FULL   Urja Rannikko
• [PATCH 0/2] mtd: spi-nand: Update Toshiba support   Jagan Teki
• [PATCH] rockchip: rk3328: rock64 - fix gen3 SPL hang   Kurt Miller
• [PATCH] rockchip: rk3328: rock64 - fix gen3 SPL hang   Matwey V. Kornilov
• [PATCH] rockchip: rk3328: rock64 - fix gen3 SPL hang   Kurt Miller
• [RFC 0/6] improve OF_PLATDATA support   Walter Lozano
• [RFC 1/6] dtoc: add support to scan drivers   Walter Lozano
• [RFC 2/6] core: extend struct driver_info to point to device   Walter Lozano
• [RFC 3/6] dtoc: extend dtoc to use struct driver_info when linking nodes   Walter Lozano
• [RFC 4/6] dtoc: update tests to match new platdata   Walter Lozano
• [RFC 5/6] dtoc: update dtb_platdata to support cd-gpios   Walter Lozano
• [RFC 6/6] dtoc add test for cd-gpios   Walter Lozano
• [PATCH 1/1] tools: ftdgrep: use /* fallthrough */ as needed   Tom Rini
• [PATCH v1 01/10] mips: octeon: Initial minimal support for the Marvell Octeon SoC   Daniel Schwierzeck
• [PATCH] Makefile: remove m68k GCC 3.4 workaround   Masahiro Yamada
• [PATCH] mmc: fsl_esdhc: read register once for card inserted status   Yangbo Lu
• [PATCH] mmc: fsl_esdhc: workaround for hardware 3.3v IO reliability issue   Yangbo Lu
• [ANN] U-Boot v2020.07-rc2 released   Heiko Schocher
• [PATCH v3 7/9] rockchip: dts: rk3328: Sync device tree files from Linux   Chen-Yu Tsai
• [RESEND PATCH] usb: dwc3: fix NULL pointer issue   Chunfeng Yun
• [RESEND PATCH] configs: mt7629: support usb host and udisk   Chunfeng Yun
• [PATCH] phy: sun4i-usb: Align H6 initialization logic with the kernel   Roman Stratiienko
• [PATCH] musb-new: Use predefined configuration data for SUN50I_H6   Roman Stratiienko
• [PATCH] net: gem: Disable PCS autonegotiation in case of fixed-link   Michal Simek
• [PATCH v1] i2c: octeon_i2c: Add I2C controller driver for Octeon   Stefan Roese
• [PATCH V2 1/6] ARM: stm32: Add default config for DHCOR   Patrick DELAUNAY
• [PATCH V3 1/6] ARM: stm32: Add default config for DHCOR   Patrick DELAUNAY
• [PATCH V3 3/6] ARM: stm32: Implement board coding on AV96   Patrick DELAUNAY
• [PATCH V3 2/6] ARM: stm32: Add board_early_init_f() to SPL   Patrick DELAUNAY
• [PATCH V3 4/6] ram: stm32mp1: Add support for multiple configs   Patrick DELAUNAY
• [PATCH V3 5/6] ARM: dts: stm32: Rework DDR DT inclusion   Patrick DELAUNAY
• [PATCH V3 6/6] ARM: stm32: Implement DDR3 coding on DHCOR SoM   Patrick DELAUNAY
• [PATCH v1 01/10] mips: octeon: Initial minimal support for the Marvell Octeon SoC   Stefan Roese
• [PATCH v1 02/10] mips: cache: Allow using CONFIG_MIPS_L2_CACHE without CONFIG_MIPS_CM   Stefan Roese
• [PATCH v1 03/10] mips: cache: Don't use cache operations with CONFIG_MIPS_CACHE_COHERENT   Stefan Roese
• [PATCH v5 1/4] omap: mmc: Avoid using libfdt with of-platdata   Faiz Abbas
• [PATCH v1 04/10] mips: traps: Set WG bit in EBase register on Octeon   Stefan Roese
• Antwort: [PATCH v2 05/35] acpi: Support generation of ACPI code   Wolfgang Wallner
• [PATCH v1 05/10] mips: Rename CONFIG_CPU_CAVIUM_OCTEON to CONFIG_CPU_MIPS64_OCTEON   Stefan Roese
• [PATCH v1 10/10] mips: octeon: Add minimal Octeon 3 EBB7304 EVK support   Stefan Roese
• [GIT PULL] rpi: updates for v2020.07   Matthias Brugger
• How to use TPM in u-boot for Secure Boot?   ROHIT YADAV
• [PATCH v1 08/10] sysreset: Add Octeon sysreset driver   Stefan Roese
• [PATCH v2 1/2] arm: dts: bcm283x: Allow UARTs to work before relocation   Matthias Brugger
• [PATCH v1 01/10] mips: octeon: Initial minimal support for the Marvell Octeon SoC   Stefan Roese
• [PATCH 00/11] stm32mp1: migrate MTD and DFU configuration in Kconfig   Patrick DELAUNAY
• [PATCH] dm: core: Reorder include files in read.c   Stefan Roese
• [PATCH 00/18] stm32mp1: add command stm32prog   Patrick DELAUNAY
• [PATCH v2 00/12] stm32mp1: several board and arch updates   Patrick DELAUNAY
• [PATCH] stm32mp1: Fix warning display when 1.5A power supply is used   Patrick DELAUNAY
• [PATCH] ARM: dts: stm32: Fix AV96 and DHCOR split   Patrick DELAUNAY
• [PATCH] ARM: dts: stm32: Synchronize DDR setttings on DH SoMs   Patrick DELAUNAY
• [PATCH 1/2] ARM: stm32: Define I2C EEPROM bus and address on DHCOM   Patrick DELAUNAY
• [PATCH 2/2] ARM: stm32: Hog GPIO PF7 high on DHCOM to unlock SPI NOR nWP   Patrick DELAUNAY
• [PATCH v4 1/2] arm: stm32mp: activate data cache in SPL and before relocation   Patrick DELAUNAY
• [PATCH v4 2/2] arm: stm32mp: activate data cache on DDR in SPL   Patrick DELAUNAY
• [PATCH] mmc: stm32_sdmmc2: change the displayed config name   Patrick DELAUNAY
• [PATCH] clk: stm32mp1: fix CK_MPU calculation   Patrick DELAUNAY
• [PATCH] ARM: dts: stm32mp1: DT alignment with Linux 5.7-rc2   Patrick DELAUNAY
• [PATCH] armv8: ls1012a: Pass PPFE firmware to Linux through FDT.   Chaitanya Sakinam
• [PATCH v2 00/12] mips: Add initial Octeon MIPS64 base support   Stefan Roese
• [PATCH v2 01/12] mips: start.S: Add CONFIG_MIPS_INIT_JUMP_OFFSET   Stefan Roese
• [PATCH v2 02/12] mips: start.S: Don't call mips_cache_reset() on ARCH_OCTEON   Stefan Roese
• [PATCH v2 03/12] mips: cache: Allow using CONFIG_MIPS_L2_CACHE without CONFIG_MIPS_CM   Stefan Roese
• [PATCH v2 04/12] mips: cache: Make flush_cache() weak to enable overwrite   Stefan Roese
• [PATCH v2 05/12] mips: time: Only compile the weak get_tbclk() when needed   Stefan Roese
• [PATCH v2 06/12] mips: traps: Set WG bit in EBase register on Octeon   Stefan Roese
• [PATCH v2 07/12] mips: mipsregs.h: Add more register macros for Octeon port   Stefan Roese
• [PATCH v2 08/12] mips: mipsregs.h: Sync with linux v5.7.0-rc3 version   Stefan Roese
• [PATCH v2 09/12] sysreset: Add Octeon sysreset driver   Stefan Roese
• [PATCH v2 10/12] mips: octeon: Initial minimal support for the Marvell Octeon SoC   Stefan Roese
• [PATCH v2 11/12] mips: octeon: dts: Add Octeon 3 cn73xx base dtsi file   Stefan Roese
• [PATCH v2 12/12] mips: octeon: Add minimal Octeon 3 EBB7304 EVK support   Stefan Roese
• [PULL] Pull request: u-boot-stm/master =u-boot-stm32-20200514   Patrick DELAUNAY
• [PATCH v10 00/18] RISC-V SiFive FU540 support SPL   Pragnesh Patel
• [PATCH v10 01/18] misc: add driver for the SiFive otp controller   Pragnesh Patel
• [PATCH v10 02/18] riscv: sifive: fu540: Use OTP DM driver for serial environment variable   Pragnesh Patel
• [PATCH v10 03/18] riscv: Add _image_binary_end for SPL   Pragnesh Patel
• [PATCH v10 04/18] lib: Makefile: build crc7.c when CONFIG_MMC_SPI   Pragnesh Patel
• [PATCH v10 05/18] riscv: sifive: dts: fu540: Add board -u-boot.dtsi files   Pragnesh Patel
• [PATCH v10 06/18] sifive: fu540: add ddr driver   Pragnesh Patel
• [PATCH v10 07/18] sifive: dts: fu540: Add DDR controller and phy register settings   Pragnesh Patel
• [PATCH v10 08/18] riscv: sifive: dts: fu540: add U-Boot dmc node   Pragnesh Patel
• [PATCH v10 09/18] clk: sifive: fu540-prci: Add clock enable and disable ops   Pragnesh Patel
• [PATCH v10 10/18] clk: sifive: fu540-prci: Add ddr clock initialization   Pragnesh Patel
• [PATCH v10 11/18] clk: sifive: fu540-prci: Release ethernet clock reset   Pragnesh Patel
• [PATCH v10 12/18] riscv: dts: sifive: Sync hifive-unleashed-a00 dts from linux   Pragnesh Patel
• [PATCH v10 13/18] riscv: cpu: fu540: Add support for cpu fu540   Pragnesh Patel
• [PATCH v10 14/18] riscv: sifive: fu540: add SPL configuration   Pragnesh Patel
• [PATCH v10 15/18] sifive: fu540: Add sample SD gpt partition layout   Pragnesh Patel
• [PATCH v10 16/18] sifive: fu540: Add U-Boot proper sector start   Pragnesh Patel
• [PATCH v10 17/18] configs: fu540: Add config options for U-Boot SPL   Pragnesh Patel
• [PATCH v10 18/18] doc: sifive: fu540: Add description for OpenSBI generic platform   Pragnesh Patel
• [PATCH 0/5] sf: Cleanup   Jagan Teki
• [PATCH 1/5] mtd: spi: Call sst_write in _write ops   Jagan Teki
• [PATCH 2/5] cmd: sf Drop reassignment of new into flash   Jagan Teki
• [PATCH 3/5] env: sf: Preserve and free the previous flash   Jagan Teki
• [PATCH 4/5] mtd: sf: Drop plat from sf_probe   Jagan Teki
• [PATCH 5/5] mtd: spi: Use IS_ENABLED to prevent ifdef   Jagan Teki
• [PATCH 01/10] kconfiglib: Update to the 14.1.0 release   Tom Rini
• [PATCH 02/10] kconfig: Add scripts/Kconfig.include from v4.19   Tom Rini
• [PATCH 03/10] Don't start ad-hoc games with -Wno-maybe-initialized   Tom Rini
• [PATCH 04/10] tegra: Convert from ACCESS_ONCE to READ/WRITE_ONCE   Tom Rini
• [PATCH 05/10] x86: Convert from ACCESS_ONCE to READ/WRITE_ONCE   Tom Rini
• [PATCH 06/10] socfpga: Mark socfpga_fpga_add() as static inline in the non-FPGA case   Tom Rini
• [PATCH 07/10] compiler*.h: sync include/linux/compiler*.h with Linux 5.7-rc5   Tom Rini
• [PATCH 08/10] compiler_types.h: Re-introduce CONFIG_OPTIMIZE_INLINING for U-Boot   Tom Rini
• [PATCH 09/10] compilers: Introduce options for forcing inlining on SPL/TPL   Tom Rini
• [PATCH 10/10] socfpga: Enable optimized inlining on stratix10   Tom Rini
• [PATCH 0/4] bootefi fixes for aarch64/layerscape   Michael Walle
• [PATCH 1/4] efi_loader: aarch64: align runtime section to 64kb   Michael Walle
• [PATCH 2/4] efi_loader: check alignment in efi_add_memory_map()   Michael Walle
• [PATCH 3/4] fsl-layerscape: align first parameter of efi_add_memory_map()   Michael Walle
• [PATCH 4/4] efi_loader: call smp_kick_all_cpus()   Michael Walle
• [PATCH v2 35/39] bdinfo: m68k: Move m68k-specific info into its own file   Angelo Dureghello
• [PATCH] net: dwc_eth_qos: update the compatible supported for STM32   Patrick Delaunay
• [PATCH] dm: core: Reorder include files in read.c   Simon Glass
• [PATCH] sf: Drop spl_flash_get_sw_write_prot   Jagan Teki
• [PATCH 06/10] socfpga: Mark socfpga_fpga_add() as static inline in the non-FPGA case   Marek Vasut
• [PATCH 10/10] socfpga: Enable optimized inlining on stratix10   Marek Vasut
• [PATCH] dm: core: Reorder include files in read.c   Stefan Roese
• [RESEND PATCH] net: dwc_eth_qos: update the compatible supported for STM32   Patrick Delaunay
• [PATCH] x86: coreboot: add SMBIOS cbmem entry parsing   Christian Gmeiner
• [RFC PATCH] mtd: spi: Drop redundent SPI flash driver   Jagan Teki
• [Uboot-stm32] [RESEND PATCH] net: dwc_eth_qos: update the compatible supported for STM32   Patrice CHOTARD
• [PATCH v3 1/2] sandbox, test: add test for GPIO_HOG function   Patrick DELAUNAY
• [PATCH v2 1/2] arm: dts: bcm283x: Allow UARTs to work before relocation   Simon Glass
• [PATCH v1] gpio: octeon_gpio: Add GPIO controller driver for Octeon   Stefan Roese
• [PATCH v5 1/4] omap: mmc: Avoid using libfdt with of-platdata   Tom Rini
• [PATCH v5 1/4] omap: mmc: Avoid using libfdt with of-platdata   Faiz Abbas
• [PATCH v5 1/4] omap: mmc: Avoid using libfdt with of-platdata   Tom Rini
• [PATCH v5 1/4] omap: mmc: Avoid using libfdt with of-platdata   Simon Glass
• [PATCH v2 04/35] irq: Add a method to convert an interrupt to ACPI   Simon Glass
• Antwort: Re: [PATCH v2 00/35] dm: Add programmatic generation of ACPI tables (part B)   Simon Glass
• [PATCH 5/5] mtd: spi: Use IS_ENABLED to prevent ifdef   Daniel Schwierzeck
• Antwort: Re: [PATCH v2 00/35] dm: Add programmatic generation of ACPI tables (part B)   Andy Shevchenko
• [PATCH] ARM: imx6: Fetch MAC address in board_init_late() on DH iMX6 PDK2   Marek Vasut
• [PATCH v3 7/9] rockchip: dts: rk3328: Sync device tree files from Linux   Kurt Miller
• [U-Boot] Please pull ARC fixes for v2020.07-rc3   Tom Rini
• [GIT PULL] rpi: updates for v2020.07   Tom Rini
• [PULL] Pull request: u-boot-stm/master =u-boot-stm32-20200514   Tom Rini
• [PATCH 2/4] kbuild: spl: Fix parallel build   Tom Rini
• [PATCH 3/4] kbuild: spl: Add shrunk arch-dtbs to targets list   Tom Rini
• [PATCH v5 1/4] omap: mmc: Avoid using libfdt with of-platdata   Simon Glass
• u-boot DT configuration node   Rob Herring
• [PATCH 1/2] mtd: spi: Separate dm vs nodm SF code   Jagan Teki
• [PATCH 2/2] sf: Simplify probe for dm code   Jagan Teki
• [PATCH v2 5/5] mtd: spi: Use CONFIG_IS_ENABLED to prevent ifdef   Jagan Teki
• [PATCH 1/4] efi_loader: aarch64: align runtime section to 64kb   Heinrich Schuchardt
• [PATCH 2/4] efi_loader: check alignment in efi_add_memory_map()   Heinrich Schuchardt
• [PATCH 3/4] fsl-layerscape: align first parameter of efi_add_memory_map()   Heinrich Schuchardt
• [PATCH 4/4] efi_loader: call smp_kick_all_cpus()   Heinrich Schuchardt
• u-boot DT configuration node   Michal Simek
• [PATCH 2/4] efi_loader: check alignment in efi_add_memory_map()   Michael Walle
• [PATCH 1/4] efi_loader: aarch64: align runtime section to 64kb   Michael Walle
• [PATCH v7 0/8] Cortina Access Drivers Package 2   Alex Nemirovsky
• [PATCH v7 1/8] mmc: ca_dw_mmc: Misc cleanup of driver   Alex Nemirovsky
• [PATCH v7 2/8] board: presidio-asic: update eMMC DT information   Alex Nemirovsky
• [PATCH v7 3/8] i2c: i2c-cortina: added CAxxxx I2C support   Alex Nemirovsky
• [PATCH v7 4/8] board: presidio-asic: Add I2C support   Alex Nemirovsky
• [PATCH v7 5/8] led: led_cortina: Add CAxxx LED support   Alex Nemirovsky
• [PATCH v7 6/8] board: presidio: add LED support   Alex Nemirovsky
• [PATCH v7 7/8] spi: ca_sflash: Add CAxxxx SPI Flash Controller   Alex Nemirovsky
• [PATCH v7 8/8] board: presidio-asic: Add SPI NOR support   Alex Nemirovsky
• [PATCH 4/4] efi_loader: call smp_kick_all_cpus()   Alexander Graf
• [PATCH 4/4] efi_loader: call smp_kick_all_cpus()   Michael Walle
• [PATCH 1/4] efi_loader: aarch64: align runtime section to 64kb   Heinrich Schuchardt
• [PATCH 1/4] efi_loader: aarch64: align runtime section to 64kb   Michael Walle
• [PATCH 2/4] efi_loader: check alignment in efi_add_memory_map()   Heinrich Schuchardt
• [PATCH 1/4] efi_loader: aarch64: align runtime section to 64kb   Heinrich Schuchardt
• [PATCH v2] Nokia RX-51: Add automated test for running RX-51 build in qemu   Pali Rohár
• [PATCH 1/4] efi_loader: aarch64: align runtime section to 64kb   Heinrich Schuchardt
• [PATCH v3 1/1] cmd: gpt: add eMMC and GPT support   Heinrich Schuchardt
• [PATCH v2] Nokia RX-51: Add automated test for running RX-51 build in qemu   Tom Rini
• [PATCH 1/4] rockchip: spl: veyron speedy boots from SPI   Kever Yang
• [PATCH 2/4] rockchip: veyron: move board_early_init_f to _r (after reloc)   Kever Yang
• [PATCH 3/4] rockchip: spl-boot-order: do not attempt to access fdt if OF_PLATDATA   Kever Yang
• [PATCH 4/4] defconfig: veyron: no need for CONFIG_SPL_PINCTRL_FULL   Kever Yang
• [PATCH 1/2] rockchip: spl: do full dram_init instead of only probing   Kever Yang
• [PATCH 2/2] spl: add fixed memory node in target fdt also when loading ATF   Kever Yang
• [PATCH v5 01/16] clk: rk3399: Enable/Disable the USB2PHY clk   Kever Yang
• [PATCH v5 02/16] clk: rk3399: Set empty for TCPHY assigned-clocks   Kever Yang
• [PATCH v5 03/16] clk: rk3399: Enable/Disable TCPHY clocks   Kever Yang
• [PATCH v5 04/16] phy: rockchip: Add Rockchip USB2PHY driver   Kever Yang
• [PATCH v5 05/16] arm64: dts: rk3399: Move u2phy into root port   Kever Yang
• [PATCH v5 06/16] phy: rockchip: Add Rockchip USB TypeC PHY driver   Kever Yang
• [PATCH v5 09/16] usb: dwc3: Add disable u2mac linestate check quirk   Kever Yang
• [PATCH v5 10/16] usb: dwc3: Enable AutoRetry feature in the controller   Kever Yang
• [PATCH v5 12/16] usb: dwc3: add make compatible for rockchip platform   Kever Yang
• [PATCH v5 13/16] driver: usb: drop legacy rockchip xhci driver   Kever Yang
• Re: [PATCH v5 14/16] ARM: dts: rk3399-evb: usb3.0 host support【请注意，邮件由linux-rockchip-bounces+kever.yang=rock-chips.com at lists.infradead.org代发】   Kever Yang
• [PATCH v5 15/16] configs: evb-rk3399: update support usb3.0 host   Kever Yang
• [PATCH v5 16/16] roc-rk3399-pc: Enable USB3.0 Host   Kever Yang
• [PATCH v3 1/6] clk: rk3399: Add enable/disable clks   Kever Yang
• Re: [PATCH v3 2/6] clk: rk3399: Enable/Disable the PCIEPHY clk【请注意，邮件由linux-rockchip-bounces+kever.yang=rock-chips.com at lists.infradead.org代发】   Kever Yang
• [PATCH v3 4/6] pci: Add Rockchip PCIe PHY controller driver   Kever Yang
• [PATCH v3 6/6] rockchip: Enable PCIe/M.2 on rock960 board   Kever Yang
• [PATCH v3 5/6] rockchip: Enable PCIe/M.2 on rk3399 board w/ M.2   Kever Yang
• [PATCH 1/1] tools: value checks in rkcommon_check_params()   Kever Yang
• [PATCH 5/5] mtd: spi: Use IS_ENABLED to prevent ifdef   Stefan Roese
• [PATCH] debug_uart: Add CR before and after announce string   Stefan Roese
• [PATCH v3 1/1] cmd: gpt: add eMMC and GPT support   Rayagonda Kokatanur
• [PATCH] debug_uart: Add CR before and after announce string   Bin Meng
• [PATCH v3 1/2] sandbox, test: add test for GPIO_HOG function   Heiko Schocher
• [PATCH] buildman: Remove _of_#_ from results directory paths   Ovidiu Panait
• [PATCH v3 1/1] cmd: gpt: add eMMC and GPT support   Heinrich Schuchardt
• [PATCH v2 0/3] boards: ls1088aqds: transition to CONFIG_DM_ETH   Ioana Ciornei
• [PATCH v2 1/3] arm: dts: ls1088aqds: add CONFIG_MULTI_DTB_FIT support   Ioana Ciornei
• [PATCH v2 2/3] board: ls1088aqds: transition to DM_ETH   Ioana Ciornei
• [PATCH v2 3/3] configs: ls1088aqds_tfa_defconfig: enable DM_ETH and related   Ioana Ciornei
• [PATCH v2 0/3] boards: ls2080aqds: transition to CONFIG_DM_ETH   Ioana Ciornei
• [PATCH v2 1/3] board: ls2080aqds: transition to DM_ETH   Ioana Ciornei
• [PATCH v2 2/3] arm: dts: ls2080aqds: add CONFIG_MULTI_DTB_FIT support   Ioana Ciornei
• [PATCH v2 3/3] configs: ls2080aqds_tfa_defconfig: enable DM_ETH and related   Ioana Ciornei
• [PATCH v3 1/2] sandbox, test: add test for GPIO_HOG function   Patrick DELAUNAY
• [PATCH] mmc: retry CMD1 in mmc_send_op_cond() until the eMMC is ready   haibo.chen at nxp.com
• [PATCH 4/5] mtd: sf: Drop plat from sf_probe   Pratyush Yadav
• [PATCH v2] configs: ls1088ardb: Add support for usb boot target   Era Tiwari 
• [PATCH 5/5] mtd: spi: Use IS_ENABLED to prevent ifdef   Rasmus Villemoes
• [PATCH 3/5] env: sf: Preserve and free the previous flash   Pratyush Yadav
• rockpro64: Enable HDMI output   Marcin Juszkiewicz
• [PATCH v2] Nokia RX-51: Add automated test for running RX-51 build in qemu   Pali Rohár
• [PATCH 5/5] mtd: spi: Use IS_ENABLED to prevent ifdef   Rasmus Villemoes
• [PATCH v3 15/17] mtd: spi-nor-core: Perform a Soft Reset on boot   Jagan Teki
• [PATCH 3/5] env: sf: Preserve and free the previous flash   Jagan Teki
• [PATCH 2/3] power: pmic: rk8xx: bind rk808 RTC   Kever Yang
• [PATCH 3/5] env: sf: Preserve and free the previous flash   Pratyush Yadav
• [PATCH 2/3] power: pmic: rk8xx: bind rk808 RTC   Suniel Mahesh
• [PATCH v2] rpi_4_defconfig: add missing CONFIG_ARCH_FIXUP_FDT_MEMORY   Jaehoon Chung
• [PATCH v7 1/8] mmc: ca_dw_mmc: Misc cleanup of driver   Jaehoon Chung
• Re: [U-Boot] [PATCH v3 06/21] efi: Correct header order in efi_memory   sheridanco.82801 at gmail.com
• [PATCH V2] ARM: imx: pico-imx8mq: Add support for Technexion Pico-iMX8MQ   Oliver Graute
• [PATCH V2] ARM: imx: pico-imx8mq: Add support for Technexion Pico-iMX8MQ   Marek Vasut
• [PATCH] net: tftp: Add client support for RFC 7440   Ramon Fried
• [PATCH] net: tftp: Add client support for RFC 7440   Marek Vasut
• [PATCH] mmc: bcm283x: fix int to pointer cast   Seung-Woo Kim
• [PATCH 1/2] rockchip: spl: do full dram_init instead of only probing   Heiko Stübner
• [PATCH] mmc: bcm283x: fix int to pointer cast   Jaehoon Chung
• [RFC PATCH v2 0/2] ARM: arbitrary virtual-physical mappings for RPi4 XHCI support   Marek Szyprowski
• [RFC PATCH v2 1/2] arm: provide a function for boards init code to modify MMU virtual-physical map   Marek Szyprowski
• [RFC PATCH v2 2/2] rpi4: add a mapping for the PCIe XHCI controller MMIO registers (ARM 32bit)   Marek Szyprowski
• [PATCH 1/4] efi_loader: aarch64: align runtime section to 64kb   Michael Walle
• [PATCH 2/5 v2] efi_loader: Implement EFI variable handling via OP-TEE   Heinrich Schuchardt
• [PATCH] imx: imx8qm_rom7720_a1: update README   Oliver Graute
• [PATCH 2/5 v2] efi_loader: Implement EFI variable handling via OP-TEE   Ilias Apalodimas
• [PATCH] rsa: don't use malloc.h in rsa-sign.c   Jonathan Gray
• [PATCH v2] configs: ls1088ardb: Add support for usb boot target   Era Tiwari
• [PATCH v2] Nokia RX-51: Add automated test for running RX-51 build in qemu   Tom Rini
• U-Boot custodian workflow   Remy Bohmer
• [PATCH v2] Nokia RX-51: Add automated test for running RX-51 build in qemu   Pali Rohár
• [PATCH v2] Nokia RX-51: Add automated test for running RX-51 build in qemu   Tom Rini
• [PATCH v2] Nokia RX-51: Add automated test for running RX-51 build in qemu   Pali Rohár
• [PATCH v2] Nokia RX-51: Add automated test for running RX-51 build in qemu   Tom Rini
• [PATCH v2] Nokia RX-51: Add automated test for running RX-51 build in qemu   Pali Rohár
• [PATCH v5 0/3] gpio: add possibility to search for gpio label name   Heiko Schocher
• [PATCH v5 1/3] gpio-uclass.c: save the GPIOD flags also in the gpio descriptor   Heiko Schocher
• [PATCH v5 2/3] sandbox, test: add test for GPIO_HOG function   Heiko Schocher
• [PATCH v5 3/3] gpio: search for gpio label if gpio is not found through bank name   Heiko Schocher
• [PATCH v2] Nokia RX-51: Add automated test for running RX-51 build in qemu   Tom Rini
• [PATCH 1/2] test/py: efi_secboot should not assume sbin is in the path   Heinrich Schuchardt
• [PATCH v10 17/18] configs: fu540: Add config options for U-Boot SPL   Jagan Teki
• [PATCH v2] Nokia RX-51: Add automated test for running RX-51 build in qemu   Pali Rohár
• [PATCH 3/3] lib: Allow hexdump to be used in SPL   Tom Rini
• [PATCH v2] Nokia RX-51: Add automated test for running RX-51 build in qemu   Tom Rini
• [PATCH 1/3] log: Allow LOG_DEBUG to always enable log output   Tom Rini
• [PATCH v5 1/3] gpio-uclass.c: save the GPIOD flags also in the gpio descriptor   Patrick DELAUNAY
• [PATCH 0/6 v3] EFI variable support via OP-TEE   Ilias Apalodimas
• [PATCH 1/6 v3] efi_loader: Add headers for EDK2 StandAloneMM communication   Ilias Apalodimas
• [PATCH 2/6 v3] efi_loader: Implement EFI variable handling via OP-TEE   Ilias Apalodimas
• [PATCH 3/6 v3] cmd: efidebug: Add support for querying UEFI variable storage   Ilias Apalodimas
• [PATCH 4/6 v3] MAINTAINERS: Add maintainer for EFI variables via OP-TEE   Ilias Apalodimas
• [PATCH 5/6 v3] doc: uefi.rst: Add OP-TEE variable storage config options   Ilias Apalodimas
• [PATCH 6/6 v3] configs: lx2160a: Add default config for lx2160a using StMM in OP-TEE   Ilias Apalodimas
• [PATCH v4 1/8] arm: lpc32xx: move SoC to mach-lpc32xx   Tom Rini
• [PATCH v4 2/8] arch/arm/Makefile: sort machine names   Tom Rini
• [PATCH v4 3/8] rename symbol: CONFIG_ORION5X -> CONFIG_ARCH_ORION5X   Tom Rini
• [PATCH v4 4/8] arm: orion5x: finish moving SoC to mach-orion5x   Tom Rini
• [PATCH v4 5/8] rename symbol: CONFIG_KIRKWOOD -> CONFIG_ARCH_KIRKWOOD   Tom Rini
• [PATCH v4 6/8] rename symbol: CONFIG_TEGRA -> CONFIG_ARCH_TEGRA   Tom Rini
• [PATCH v4 7/8] rename symbol: CONFIG_STM32 -> CONFIG_ARCH_STM32   Tom Rini
• [PATCH v4 8/8] drivers/reset/Kconfig: fix typo   Tom Rini
• [PATCH 2/3] lib: Allow MD5 to be enabled in SPL   Tom Rini
• [PATCH v2 1/2] JFFS2: Process obsolete nodes as well as accurate ones   Tom Rini
• [PATCH v2 2/2] JFFS2: Add useful fields into lists   Tom Rini
• [PATCH] Makefile: add file 'defconfig' to clean target   Tom Rini
• [PATCH] lib: rsa: Also check for presence of r-squared property   Tom Rini
• [PATCH] spl: Always define preloader_console_init   Tom Rini
• [PATCH 1/1] tools: mkimage: use /* fallthrough */ as needed   Tom Rini
• [PATCH 1/1] tools: ftdgrep: use /* fallthrough */ as needed   Tom Rini
• [PATCH 1/1] common/board_f: avoid -Wtype-limits warning   Tom Rini
• [PATCH v6 1/2] usb: Update struct usb_device to indicate speed enum   Tom Rini
• [PATCH v6 2/2] pci: Fix typo in definition for PCI_DEV   Tom Rini
• [PATCH] MAINTAINERS: POWERPC MPC8XX: Update email address   Tom Rini
• [PATCH] lib: rsa: avoid overriding the object name when already specified   Tom Rini
• [PATCH] Makefile: remove m68k GCC 3.4 workaround   Tom Rini
• [RESEND PATCH] configs: mt7629: support usb host and udisk   Tom Rini
• [PATCH] rsa: don't use malloc.h in rsa-sign.c   Tom Rini
• [PATCH v3 00/22] common: Further reduce the size of common.h   Simon Glass
• [PATCH v3 1/1] cmd: gpt: add eMMC and GPT support   Simon Glass
• [PATCH v3 00/22] common: Further reduce the size of common.h   Tom Rini
• [PATCH 1/6] env: Convert CONFIG_DELAY_ENVIRONMENT to Kconfig   Tom Rini
• [PATCH 2/6] board_r: env: Use IS_ENABLED() instead of #ifdefs   Tom Rini
• [PATCH 3/6] board_r: Introduce CONFIG_PCI_INIT_R Kconfig option   Tom Rini
• [PATCH 4/6] qemu_arm64_defconfig: Enable CONFIG_PCI_INIT_R   Tom Rini
• [PATCH 5/6] qemu_arm_defconfig: Enable CONFIG_PCI_INIT_R   Tom Rini
• [PATCH 6/6] qemu-x86*_defconfig: Enable CONFIG_PCI_INIT_R   Tom Rini
• [PATCH] mmc: bcm283x: fix int to pointer cast   Seung-Woo Kim
• [PATCH v10 17/18] configs: fu540: Add config options for U-Boot SPL   Pragnesh Patel
• [PATCH V3] usb: ehci-omap: Add Support for DM_USB and OF_CONTROL   Adam Ford
• [ANN] U-Boot v2020.07-rc2 released   Peng Fan
• [PATCH 6/6 v3] configs: lx2160a: Add default config for lx2160a using StMM in OP-TEE   Heinrich Schuchardt
• patman: ImportError   Stefan Bosch
• [ANN] U-Boot v2020.07-rc2 released   Tom Rini
• [PATCH V3] usb: ehci-omap: Add Support for DM_USB and OF_CONTROL   Marek Vasut
• [PATCH] arm: mach-k3: j721e_init: Add support for backup boot modes   Faiz Abbas
• [PATCH 4/4] efi_loader: call smp_kick_all_cpus()   Michael Walle
• [PATCH] efi_loader: round the memory area in efi_add_memory_map()   Michael Walle
• [PATCH] Azure: Add 'tools-only' build for macOS X hosts   Tom Rini
• [PATCH 1/5] libfdt: Export overlay_apply_node() as fdt_overlay_apply_node()   Marek Vasut
• [PATCH v2] net: tftp: Add client support for RFC 7440   Ramon Fried
• [PATCH 1/2] cpu: imx8: fix type and rate detection   Anatolij Gustschin
• [PATCH 2/2] thermal: imx_scu_thermal: fix getting DT alert property value   Anatolij Gustschin
• [PATCH] patman: Avoid circular dependency between command and tools   Simon Glass
• patman: ImportError   Simon Glass
• [PATCH] patman: Avoid circular dependency between command and tools   Simon Glass
• [PATCH] Azure: Add 'tools-only' build for macOS X hosts   Jonathan Gray
• [PATCH] efi_loader: round the memory area in efi_add_memory_map()   Heinrich Schuchardt
• [PATCH v2 0/2] add broadcom spi driver   Rayagonda Kokatanur
• [PATCH v2 1/2] driver: spi: add brcm iproc qspi support.   Rayagonda Kokatanur
• [PATCH v2 2/2] drivers: spi: add commands for micron SPI   Rayagonda Kokatanur
• [PATCH 02/10] efi_loader: add option to initialise EFI subsystem early   Heinrich Schuchardt
• [PATCH 03/10] efi_loader: define UpdateCapsule api   Heinrich Schuchardt
• [PATCH v1 00/15] add basic driver support for broadcom NS3 soc   Rayagonda Kokatanur
• [PATCH v1 01/15] configs: ns3: enable pinctrl driver   Rayagonda Kokatanur
• [PATCH v1 02/15] dt-bindings: pinctrl: add ns3 pads definition   Rayagonda Kokatanur
• [PATCH v1 03/15] arm: dts: ns3: add pinctrl node   Rayagonda Kokatanur
• [PATCH v1 04/15] arm: dts: ns3: add gpio node   Rayagonda Kokatanur
• [PATCH v1 05/15] configs: ns3: enable BCM IPROC mmc driver   Rayagonda Kokatanur
• [PATCH v1 06/15] arm: dts: ns3: add emmc node   Rayagonda Kokatanur
• [PATCH v1 07/15] configs: ns3: enable mmc commands   Rayagonda Kokatanur
• [PATCH v1 08/15] arm: dts: ns3: add qspi node   Rayagonda Kokatanur
• [PATCH v1 09/15] arm: dts: ns3: add i2c node   Rayagonda Kokatanur
• [PATCH v1 10/15] arm: dts: ns3: add PAXB PCIe host and phy node   Rayagonda Kokatanur
• [PATCH v1 11/15] configs: ns3: enable gpt commands   Rayagonda Kokatanur
• [PATCH v1 12/15] configs: ns3: enable EXT4 and FAT fs support   Rayagonda Kokatanur
• [PATCH v1 13/15] configs: ns3: enable sp805 watchdog driver   Rayagonda Kokatanur
• [PATCH v1 14/15] arm: dts: ns3: add sp805 watchdog node   Rayagonda Kokatanur
• [PATCH v1 15/15] board: ns3: start sp805 watchdog service   Rayagonda Kokatanur
• [PATCH v1 0/3] add FIT image support for broadcom NS3 soc   Rayagonda Kokatanur
• [PATCH v1 1/3] configs: ns3: enable FIT config   Rayagonda Kokatanur
• [PATCH v1 2/3] board: ns3: add FIT image its file   Rayagonda Kokatanur
• [PATCH v1 3/3] board: ns3: add development keys used in FIT   Rayagonda Kokatanur
• [PATCH v1 0/3] add optee support for broadcom NS3 soc   Rayagonda Kokatanur
• [PATCH v1 1/3] board: ns3: add optee based bnxt fw load driver   Rayagonda Kokatanur
• [PATCH v1 2/3] configs: ns3: enable tee and optee driver   Rayagonda Kokatanur
• [PATCH v1 3/3] arm: dts: ns3: add optee node   Rayagonda Kokatanur
• [PATCH v1 0/3] add elog support for broadcom NS3 soc   Rayagonda Kokatanur
• [PATCH v1 1/3] common: ns3: add error logging support   Rayagonda Kokatanur
• [PATCH v1 2/3] board: ns3: kconfig: extend board kconfig with specific commands   Rayagonda Kokatanur
• [PATCH v1 3/3] cmd: bcm: add broadcom error log setup command   Rayagonda Kokatanur
• [PATCH v1 0/3] add custome commands for broadcom NS3 soc   Rayagonda Kokatanur
• [PATCH v1 1/3] cmd: bcm: add nitro boot command   Rayagonda Kokatanur
• [PATCH v1 2/3] cmd: bcm: add nitro image load commands   Rayagonda Kokatanur
• [PATCH v1 3/3] cmd: bcm: add command for chimp hand shake   Rayagonda Kokatanur
• [PATCH 1/2] cpu: imx8: fix type and rate detection   Peng Fan
• [PATCH 2/2] thermal: imx_scu_thermal: fix getting DT alert property value   Peng Fan
• [PATCH v2] efi_loader: round the memory area in efi_add_memory_map()   Michael Walle
• [PATCH v2] efi_loader: round the memory area in efi_add_memory_map()   Heinrich Schuchardt
• [PATCH 2/2] thermal: imx_scu_thermal: fix getting DT alert property value   Anatolij Gustschin
• Issue with 'ubi part' ubi_io_read: error -74 (ECC error)   Jupiter
• [PATCH v9 04/18] lib: Makefile: build crc7.c when CONFIG_MMC_SPI   Bin Meng
• [PATCH v10 06/18] sifive: fu540: add ddr driver   Bin Meng
• [PATCH v2] Nokia RX-51: Add automated test for running RX-51 build in qemu   Pali Rohár
• [PATCH v3] Nokia RX-51: Add automated test for running RX-51 build in qemu   Pali Rohár
• [PATCH v10 17/18] configs: fu540: Add config options for U-Boot SPL   Bin Meng
• [PATCH v10 18/18] doc: sifive: fu540: Add description for OpenSBI generic platform   Bin Meng
• [PATCH v10 07/18] sifive: dts: fu540: Add DDR controller and phy register settings   Bin Meng
• [PATCH v10 10/18] clk: sifive: fu540-prci: Add ddr clock initialization   Bin Meng
• [PATCH v10 11/18] clk: sifive: fu540-prci: Release ethernet clock reset   Bin Meng
• [PATCH v10 13/18] riscv: cpu: fu540: Add support for cpu fu540   Bin Meng
• [PATCH] x86: mtrr: Drop the mask display when changing an mtrr   Bin Meng
• patman: ImportError   Stefan Bosch
• [PATCH v2 01/39] tbs2910: Drop the 'bd' command   Bin Meng
• [PATCH v2 14/39] bdinfo: powerpc: Use the generic bd command   Bin Meng
• [PATCH v2 15/39] bdinfo: m68k: Use the generic bd command   Bin Meng
• [PATCH v2 16/39] bdinfo: arm: Use the generic bd command   Bin Meng
• [PATCH v2 17/39] bdinfo: arc: Use the generic bd command   Bin Meng
• [PATCH v2 26/39] bdinfo: Drop print_bi_flash()   Bin Meng
• [PATCH v2 30/39] bdinfo: net: Drop legacy ethernet bdinfo   Bin Meng
• [PATCH v3 1/3] arch: x86: apl: Only load VBT if CONFIG_HAVE_VBT is enabled   Bin Meng
• [PATCH v3 2/3] arch: x86: apl: Use devicetree for FSP-M configuration   Bin Meng
• [PATCH v9 04/18] lib: Makefile: build crc7.c when CONFIG_MMC_SPI   Heinrich Schuchardt
• [PATCH v3 3/3] arch: x86: apl: Use devicetree for FSP-S configuration   Bin Meng
• [PATCH] x86: coreboot: add SMBIOS cbmem entry parsing   Bin Meng
• [PATCH v10 13/18] riscv: cpu: fu540: Add support for cpu fu540   Pragnesh Patel
• [PATCH v9 04/18] lib: Makefile: build crc7.c when CONFIG_MMC_SPI   Bin Meng
• [PATCH v10 17/18] configs: fu540: Add config options for U-Boot SPL   Pragnesh Patel
• [PATCH v10 06/18] sifive: fu540: add ddr driver   Pragnesh Patel
• [PATCH v2 01/35] dm: core: Add an ACPI name for the root node   Bin Meng
• [PATCH v10 17/18] configs: fu540: Add config options for U-Boot SPL   Bin Meng
• [PATCH 2/2] thermal: imx_scu_thermal: fix getting DT alert property value   Peng Fan
• [ANN] U-Boot v2020.07-rc2 released   Peng Fan
• [PATCH 2/2] thermal: imx_scu_thermal: fix getting DT alert property value   Anatolij Gustschin
• [PATCH v2 02/35] acpi: Add a function to get a device path and scope   Bin Meng
• [PATCH 01/15] net: pcnet: Drop typedef struct pcnet_priv_t   Marek Vasut
• [PATCH 02/15] net: pcnet: Drop PCNET_HAS_PROM   Marek Vasut
• [PATCH 03/15] net: pcnet: Use PCI_DEVICE() to define PCI device compat list   Marek Vasut
• [PATCH 04/15] net: pcnet: Simplify private data allocation   Marek Vasut
• [PATCH 05/15] net: pcnet: Replace memset+malloc with calloc   Marek Vasut
• [PATCH 06/15] net: pcnet: Move private data allocation to initialize   Marek Vasut
• [PATCH 07/15] net: pcnet: Move initialize function at the end   Marek Vasut
• [PATCH 08/15] net: pcnet: Drop useless forward declarations   Marek Vasut
• [PATCH 09/15] net: pcnet: Wrap devbusfn into private data   Marek Vasut
• [PATCH 10/15] net: pcnet: Pass private data through dev->priv   Marek Vasut
• [PATCH 11/15] net: pcnet: Wrap iobase into private data   Marek Vasut
• [PATCH 12/15] net: pcnet: Wrap name and enetaddr into private data   Marek Vasut
• [PATCH 13/15] net: pcnet: Split common and non-DM functions   Marek Vasut
• [PATCH 14/15] net: pcnet: Add DM support   Marek Vasut
• [PATCH 15/15] net: pcnet: Add Kconfig entries   Marek Vasut
• [PATCH v2] efi_loader: round the memory area in efi_add_memory_map()   Heinrich Schuchardt
• [PATCH 0/7 v4] EFI variable support via OP-TEE   Ilias Apalodimas
• [PATCH 1/7 v4] efi_loader: Add headers for EDK2 StandAloneMM communication   Ilias Apalodimas
• [PATCH 2/7 v4] efi_loader: Implement EFI variable handling via OP-TEE   Ilias Apalodimas
• [PATCH 3/7 v4] cmd: efidebug: Add support for querying UEFI variable storage   Ilias Apalodimas
• [PATCH 4/7 v4] MAINTAINERS: Add maintainer for EFI variables via OP-TEE   Ilias Apalodimas
• [PATCH 5/7 v4] doc: uefi.rst: Add OP-TEE variable storage config options   Ilias Apalodimas
• [PATCH 6/7 v4] configs: lx2160a: Add default config for lx2160a using StMM in OP-TEE   Ilias Apalodimas
• [PATCH 7/7 v4] dts: nxp2160ardb: add op-tee node   Ilias Apalodimas
• [PATCH v2] net: tftp: Add client support for RFC 7440   Beniamino Galvani
• [PATCH 1/2] test/py: efi_secboot should not assume sbin is in the path   AKASHI Takahiro
• [PATCH 03/10] efi_loader: define UpdateCapsule api   AKASHI Takahiro
• [PATCH 02/10] efi_loader: add option to initialise EFI subsystem early   AKASHI Takahiro
• [PATCH 02/10] kconfig: Add scripts/Kconfig.include from v4.19   Masahiro Yamada
• [PATCH 0/3] x86: Correct SPI memory-mapping query   Simon Glass
• [PATCH 1/3] x86: spi: Add a way to access the SPI mapping via registers   Simon Glass
• [PATCH 2/3] x86: spi: Rewrite logic for obtaining the SPI memory map   Simon Glass
• [PATCH 3/3] x86: spl: Print the error on SPL failure   Simon Glass
• [PATCH v3 1/3] arch: x86: apl: Only load VBT if CONFIG_HAVE_VBT is enabled   Simon Glass
• [PATCH v3 2/3] arch: x86: apl: Use devicetree for FSP-M configuration   Simon Glass
• [PATCH v3 3/3] arch: x86: apl: Use devicetree for FSP-S configuration   Simon Glass
• [PATCH 1/5] libfdt: Export overlay_apply_node() as fdt_overlay_apply_node()   Simon Glass
• [PATCH] mpc83xx, abb: remove suvd3 board   Heiko Schocher
• [PATCH] bdinfo: Show information about fdt blob via bdinfo   Heiko Schocher
• [PATCH] bdinfo: Show information about fdt blob via bdinfo   Bin Meng
• [PATCH] arm: mach-k3: Enable dcache in SPL   Jan Kiszka
• [PATCH v2] efi_loader: round the memory area in efi_add_memory_map()   Matthias Brugger
• Pull request for UEFI sub-system for efi-2020-07-rc3   Heinrich Schuchardt
• [PATCH v2 1/3] board: ls2080aqds: transition to DM_ETH   Priyanka Jain
• [PATCH] mmc: bcm283x: fix int to pointer cast   Matthias Brugger
• Antwort: Re: [PATCH v2 04/35] irq: Add a method to convert an interrupt to ACPI   Wolfgang Wallner
• [PATCH v2] net: tftp: Add client support for RFC 7440   Ramon Fried
• [PATCH v3] net: tftp: Add client support for RFC 7440   Ramon Fried
• [PATCH] spi: zynq_[q]spi: Convert config's to macro's   Michal Simek
• [PATCH] arm64: xilinx: Print fpga error value in hex   Michal Simek
• [PATCH 15/15] net: pcnet: Add Kconfig entries   Daniel Schwierzeck
• [PATCH v2 1/3] board: ls2080aqds: transition to DM_ETH   Ioana Ciornei
• [PATCH 15/15] net: pcnet: Add Kconfig entries   Marek Vasut
• [PATCH v4 0/3] Move FSP configuration to devicetree   Bernhard Messerklinger
• [PATCH v4 1/3] arch: x86: apl: Only load VBT if CONFIG_HAVE_VBT is enabled   Bernhard Messerklinger
• [PATCH v4 2/3] arch: x86: apl: Use devicetree for FSP-M configuration   Bernhard Messerklinger
• [PATCH v4 3/3] arch: x86: apl: Use devicetree for FSP-S configuration   Bernhard Messerklinger
• [PATCH v3 0/3] boards: ls2080aqds: transition to CONFIG_DM_ETH   Ioana Ciornei
• [PATCH v3 1/3] board: ls2080aqds: transition to DM_ETH   Ioana Ciornei
• [PATCH v3 2/3] arm: dts: ls2080aqds: add CONFIG_MULTI_DTB_FIT support   Ioana Ciornei
• [PATCH v3 3/3] configs: ls2080aqds_tfa_defconfig: enable DM_ETH and related   Ioana Ciornei
• [PATCH v2] ARM: dts: sama5d2: Add uart4 definition   Eugen.Hristev at microchip.com
• [PATCH 3/5] env: sf: Preserve and free the previous flash   Jagan Teki
• [PATCH] Azure: Add 'tools-only' build for macOS X hosts   Tom Rini
• [RFC PATCH v3 0/3] ARM: arbitrary virtual-physical mappings for RPi4 XHCI support   Marek Szyprowski
• [RFC PATCH v3 1/3] arm: provide a function for boards init code to modify MMU virtual-physical map   Marek Szyprowski
• [RFC PATCH v3 2/3] mmc: bcm283x: fix int to pointer cast   Marek Szyprowski
• [RFC PATCH v3 3/3] rpi4: add a mapping for the PCIe XHCI controller MMIO registers (ARM 32bit)   Marek Szyprowski
• [PATCH v3 10/17] mtd: spi-nor-core: Get command opcode extension type from BFPT   Pragnesh Patel
• Pull request for UEFI sub-system for efi-2020-07-rc3   Tom Rini
• [PATCH] bdinfo: Show information about fdt blob via bdinfo   Tom Rini
• [PATCH 02/10] kconfig: Add scripts/Kconfig.include from v4.19   Tom Rini
• [PATCH 3/5] env: sf: Preserve and free the previous flash   Pratyush Yadav
• u-boot DT configuration node   Rob Herring
• [PATCH 15/15] net: pcnet: Add Kconfig entries   Daniel Schwierzeck
• u-boot DT configuration node   Michal Simek
• [PATCH v3 1/4] lib: rsa: distinguish between tpl and spl for CONFIG_RSA_VERIFY   Heiko Stuebner
• [PATCH v3 2/4] lib: rsa: take spl/non-spl into account when building rsa_verify_with_pkey()   Heiko Stuebner
• [PATCH v3 3/4] spl: fit: select SPL_HASH_SUPPORT for SPL_FIT_SIGNATURE   Heiko Stuebner
• [PATCH v3 4/4] spl: fit: select SPL_CRYPTO_SUPPORT for SPL_FIT_SIGNATURE   Heiko Stuebner
• [PATCH v3.1 2/4] lib: rsa: take spl/non-spl into account when building rsa_verify_with_pkey()   Heiko Stuebner
• [PATCH v3 1/4] lib: rsa: distinguish between tpl and spl for CONFIG_RSA_VERIFY   Philipp Tomsich
• [PATCH 4/4] kbuild: arm: Fix duplicate builds of dtbs   Andrew F. Davis
• [PATCH 1/8] semihosting: Change semihosting file operation functions into global symbols   Heinrich Schuchardt
• [PATCH 02/10] kconfig: Add scripts/Kconfig.include from v4.19   Tom Rini
• [PATCH 2/8] semihosting: Add support for writing to a file   Heinrich Schuchardt
• [PATCH 3/8] qemu: arm64: Add support for efi firmware management protocol routines   Grant Likely
• [PATCH v2 2/4] mx6cuboxi: customize board_boot_order to access eMMC   Walter Lozano
• [PATCH 4/4] kbuild: arm: Fix duplicate builds of dtbs   Jan Kiszka
• U-Boot custodian workflow   Tom Rini
• [PATCH v4 0/5] TI Ethernet PHY changes   Grygorii Strashko
• [PATCH 4/4] efi_loader: call smp_kick_all_cpus()   Tom Rini
• [PATCH v3 10/17] mtd: spi-nor-core: Get command opcode extension type from BFPT   Pratyush Yadav
• [PATCH 4/4] efi_loader: call smp_kick_all_cpus()   Heinrich Schuchardt
• [PATCH] kconfig: show compiler version text in the top comment   Tom Rini
• [PATCH v1 00/15] add basic driver support for broadcom NS3 soc   Tom Rini
• [PATCH 4/4] efi_loader: call smp_kick_all_cpus()   Tom Rini
• [PATCH] rockchip: rk3328: rock64 - fix gen3 SPL hang   Kurt Miller
• [RFC PATCH v3 3/3] rpi4: add a mapping for the PCIe XHCI controller MMIO registers (ARM 32bit)   Simon Glass
• [PATCH 2/2] thermal: imx_scu_thermal: fix getting DT alert property value   Fabio Estevam
• U-Boot DM device tree and Linux device tree - what are the differences and why?   Rudolf J Streif
• [PATCH 02/10] kconfig: Add scripts/Kconfig.include from v4.19   Masahiro Yamada
• [v2, 1/2] mmc: fsl_esdhc: read register once for card inserted status   Yangbo Lu
• [v2, 2/2] mmc: fsl_esdhc: workaround for hardware 3.3v IO reliability issue   Yangbo Lu
• [v2, 1/2] mmc: fsl_esdhc: read register once for card inserted status   Peng Fan
• [v2, 2/2] mmc: fsl_esdhc: workaround for hardware 3.3v IO reliability issue   Peng Fan
• [PATCH] mmc: retry CMD1 in mmc_send_op_cond() until the eMMC is ready   Peng Fan
• [PATCH] bdinfo: Show information about fdt blob via bdinfo   Heiko Schocher
• [PATCH 2/2] thermal: imx_scu_thermal: fix getting DT alert property value   Heiko Schocher
• U-Boot DM device tree and Linux device tree - what are the differences and why?   Rudolf J Streif
• [PATCH] net: tftp: fix option validation as per RFCs   Ravik Hasija
• TPM 2.0   Kamal R. Prasad
• [PATCH v4 0/3] Move FSP configuration to devicetree   Bin Meng
• [PATCH v7 3/8] i2c: i2c-cortina: added CAxxxx I2C support   Heiko Schocher
• [PATCH v7 4/8] board: presidio-asic: Add I2C support   Heiko Schocher
• [PATCH v1] i2c: octeon_i2c: Add I2C controller driver for Octeon   Heiko Schocher
• [PATCH] arm: mach-k3: Enable dcache in SPL   Lokesh Vutla
• [PATCH] arm: mach-k3: Enable dcache in SPL   Jan Kiszka
• [PATCH] arm: mach-k3: Enable dcache in SPL   Jan Kiszka
• [PATCH v11 00/18] RISC-V SiFive FU540 support SPL   Pragnesh Patel
• [PATCH v11 01/18] misc: add driver for the SiFive otp controller   Pragnesh Patel
• [PATCH v11 02/18] riscv: sifive: fu540: Use OTP DM driver for serial environment variable   Pragnesh Patel
• [PATCH v11 03/18] riscv: Add _image_binary_end for SPL   Pragnesh Patel
• [PATCH v11 04/18] lib: Makefile: build crc7.c when CONFIG_MMC_SPI   Pragnesh Patel
• [PATCH v11 05/18] riscv: sifive: dts: fu540: Add board -u-boot.dtsi files   Pragnesh Patel
• [PATCH v11 06/18] sifive: fu540: add ddr driver   Pragnesh Patel
• [PATCH v11 07/18] sifive: dts: fu540: Add DDR controller and phy register settings   Pragnesh Patel
• [PATCH v11 08/18] riscv: sifive: dts: fu540: add U-Boot dmc node   Pragnesh Patel
• [PATCH v11 09/18] clk: sifive: fu540-prci: Add clock enable and disable ops   Pragnesh Patel
• [PATCH v11 10/18] clk: sifive: fu540-prci: Add ddr clock initialization   Pragnesh Patel
• [PATCH v11 11/18] clk: sifive: fu540-prci: Release ethernet clock reset   Pragnesh Patel
• [PATCH v11 12/18] riscv: dts: sifive: Sync hifive-unleashed-a00 dts from linux   Pragnesh Patel
• [PATCH v11 13/18] riscv: cpu: fu540: Add support for cpu fu540   Pragnesh Patel
• [PATCH v11 14/18] riscv: sifive: fu540: add SPL configuration   Pragnesh Patel
• [PATCH v11 15/18] sifive: fu540: Add sample SD gpt partition layout   Pragnesh Patel
• [PATCH v11 16/18] sifive: fu540: Add U-Boot proper sector start   Pragnesh Patel
• [PATCH v11 17/18] configs: fu540: Add config options for U-Boot SPL   Pragnesh Patel
• [PATCH v11 18/18] doc: sifive: fu540: Add description for OpenSBI generic platform   Pragnesh Patel
• TI boards vs. distro boot   Jan Kiszka
• [PATCH] mmc: retry CMD1 in mmc_send_op_cond() until the eMMC is ready   Jaehoon Chung
• Antwort: [PATCH v2 08/35] acpi: Support string output   Wolfgang Wallner
• [PATCH 2/2] thermal: imx_scu_thermal: fix getting DT alert property value   Anatolij Gustschin
• [PATCH v11 06/18] sifive: fu540: add ddr driver   Bin Meng
• [PATCH 2/2] thermal: imx_scu_thermal: fix getting DT alert property value   Anatolij Gustschin
• [PATCH v2 09/35] acpi: Support generation of GPIO descriptor   Wolfgang Wallner
• [PATCH] cbfs: drop file_cbfs_result declaration   Christian Gmeiner
• [PATCH] arm: mach-k3: Enable dcache in SPL   Lokesh Vutla
• add commands to uboot   Kamal R. Prasad
• Antwort: [PATCH v2 10/35] acpi: Support generation of a GPIO/irq for a device   Wolfgang Wallner
• [PATCH 2/2] thermal: imx_scu_thermal: fix getting DT alert property value   Anatolij Gustschin
• [PATCH] rockchip: rk3328: rock64 - fix gen3 SPL hang   Matwey V. Kornilov
• [PATCH 2/2] thermal: imx_scu_thermal: fix getting DT alert property value   Peng Fan
• [PATCH] efi_loader: Remove unnecessary debug   Pragnesh Patel
• [PATCH] efi_loader: Remove unnecessary debug   Heinrich Schuchardt
• [PATCH 2/2] thermal: imx_scu_thermal: fix getting DT alert property value   Anatolij Gustschin
• [PATCH] cbfs: drop file_cbfs_result declaration   Heinrich Schuchardt
• Issue with 'ubi part' ubi_io_read: error -74 (ECC error)   Richard Weinberger
• [PATCH 2/2] thermal: imx_scu_thermal: fix getting DT alert property value   Peng Fan
• [PATCH 2/2] thermal: imx_scu_thermal: fix getting DT alert property value   Fabio Estevam
• Antwort: [PATCH v2 11/35] acpi: Support generation of I2C descriptor   Wolfgang Wallner
• [RFC PATCH v3 3/3] rpi4: add a mapping for the PCIe XHCI controller MMIO registers (ARM 32bit)   Marek Szyprowski
• [PATCH 0/4] arm: imx6q: pcm058: Convert support to use DM with DTs   Niel Fourie
• [PATCH 1/4] dts-bindings: regulator: Add dlg,da9063-regulator   Niel Fourie
• [PATCH 2/4] arm: dts: imx6q: Add Linux dts files for Phytec Mira   Niel Fourie
• [PATCH 3/4] arm: imx6q: pcm058: change MAINTAINER   Niel Fourie
• [PATCH 4/4] arm: imx6q: pcm058: Convert pcm058 to use DM with DTs   Niel Fourie
• Patch for CVE-2018-18440 and CVE-2018-18439   Abhay Singh
• Issue with 'ubi part' ubi_io_read: error -74 (ECC error)   Jupiter
• [PATCH v4] dm: uclass: don't assign aliased seq numbers   Michael Walle
• U-Boot DM device tree and Linux device tree - what are the differences and why?   Fabio Estevam
• [PATCH v1] i2c: octeon_i2c: Add I2C controller driver for Octeon   Simon Glass
• [PATCH V2 1/5] libfdt: Export overlay_apply_node() as fdt_overlay_apply_node()   Marek Vasut
• [PATCH V2 2/5] fdtdec: Add weak function to patch U-Boot DT right after fdtdec_setup()   Marek Vasut
• [PATCH V2 3/5] ARM: dts: rmobile: Reserve space in R-Car Gen3 DTs   Marek Vasut
• [PATCH V2 4/5] ARM: rmobile: Merge prior-stage firmware DT fragment into U-Boot DT on Gen3   Marek Vasut
• [PATCH V2 5/5] ARM: rmobile: Enable support for OpTee on Gen3   Marek Vasut
• Antwort: [PATCH v2 13/35] acpigen: Support writing a length   Wolfgang Wallner
• [PATCH V2 2/5] fdtdec: Add weak function to patch U-Boot DT right after fdtdec_setup()   Bin Meng
• [PATCH] cbfs: drop file_cbfs_result declaration   Bin Meng
• [PATCH V2 2/5] fdtdec: Add weak function to patch U-Boot DT right after fdtdec_setup()   Marek Vasut
• [PATCH V2 2/5] fdtdec: Add weak function to patch U-Boot DT right after fdtdec_setup()   Bin Meng
• [PATCH 01/13] cbfs: Rename the result variable   Bin Meng
• [PATCH 02/13] cbfs: Use ulong consistently   Bin Meng
• [PATCH 03/13] cbfs: Use bool type for whether initialised   Bin Meng
• [PATCH V2 2/5] fdtdec: Add weak function to patch U-Boot DT right after fdtdec_setup()   Marek Vasut
• [PATCH 04/13] cbfs: Adjust return value of file_cbfs_next_file()   Bin Meng
• [PATCH 05/13] cbfs: Adjust file_cbfs_load_header() to use cbfs_priv   Bin Meng
• [PATCH 06/13] cbfs: Adjust cbfs_load_header_ptr() to use cbfs_priv   Bin Meng
• [PATCH] x86: coreboot: add SMBIOS cbmem entry parsing   Bin Meng
• [PATCH] cbfs: drop file_cbfs_result declaration   Bin Meng
• [PATCH 02/10] kconfig: Add scripts/Kconfig.include from v4.19   Tom Rini
• [PATCH] rockchip: rk3328: rock64 - fix gen3 SPL hang   Kurt Miller
• [PATCH] Remove CROSS_COMPILE default from arch/*/config.mk   Tom Rini
• [PATCH 1/7] amlogic: Remove ARCH= references from documentation   Tom Rini
• [PATCH 2/7] imx: Remove ARCH= references from documentation   Tom Rini
• [PATCH 3/7] powerpc: Remove ARCH= references from documentation   Tom Rini
• [PATCH 4/7] rockchip: Remove ARCH= references from documentation   Tom Rini
• [PATCH 5/7] arm: ti: Remove ARCH= references from documentation   Tom Rini
• [PATCH 6/7] m68k: Remove ARCH= references from documentation   Tom Rini
• [PATCH 7/7] fu540: Remove ARCH= references from documentation   Tom Rini
• [PATCH v3 14/17] mtd: spi-nor-core: Perform a Soft Reset on shutdown   Pratyush Yadav
• [PATCH 2/7] imx: Remove ARCH= references from documentation   Amit Tomer
• [PATCH 2/7] imx: Remove ARCH= references from documentation   Tom Rini
• [PATCH 7/7] fu540: Remove ARCH= references from documentation   Tom Rini
• [PATCH v3 15/17] mtd: spi-nor-core: Perform a Soft Reset on boot   Pratyush Yadav
• [PATCH 1/1] efi_loader: add EFI_MEMORY_SP to memory attributes   Heinrich Schuchardt
• [PATCH v10 17/18] configs: fu540: Add config options for U-Boot SPL   Jagan Teki
• [PATCH v11 17/18] configs: fu540: Add config options for U-Boot SPL   Jagan Teki
• [PATCH v11 11/18] clk: sifive: fu540-prci: Release ethernet clock reset   Jagan Teki
• Warnings on Edison   Simon Glass
• [RFC PATCH v3 3/3] rpi4: add a mapping for the PCIe XHCI controller MMIO registers (ARM 32bit)   Simon Glass
• [PATCH v4] dm: uclass: don't assign aliased seq numbers   Simon Glass
• [PATCH] Remove CROSS_COMPILE default from arch/*/config.mk   Simon Glass
• [PATCH v1 00/15] add basic driver support for broadcom NS3 soc   Rayagonda Kokatanur
• [PATCH v1 00/15] add basic driver support for broadcom NS3 soc   Tom Rini
• [PATCH v3 01/22] common: Drop uuid.h from common header   Tom Rini
• [PATCH v3 02/22] flash: Tidy up coding style for flash functions   Tom Rini
• [PATCH v3 03/22] common: Drop flash.h from common header   Tom Rini
• [PATCH v3 04/22] arm: Don't include common.h in header files   Tom Rini
• [PATCH v3 05/22] common: Drop net.h from common header   Tom Rini
• [PATCH v3 06/22] part: Drop disk_partition_t typedef   Tom Rini
• [PATCH v3 07/22] common: Drop part.h from common header   Tom Rini
• [PATCH v3 08/22] bootstage: Use BOOTSTAGE instead of BOOTSTATE   Tom Rini
• [PATCH v3 09/22] common: Drop bootstage.h from common header   Tom Rini
• [PATCH v3 10/22] common: Drop image.h from common header   Tom Rini
• [PATCH v3 11/22] common: Drop init.h from common header   Tom Rini
• [PATCH v3 12/22] command: Remove the cmd_tbl_t typedef   Tom Rini
• [PATCH v3 13/22] Fix some checkpatch warnings in calls to debug()   Tom Rini
• [PATCH v3 14/22] common: Drop log.h from common header   Tom Rini
• [PATCH v3 15/22] common: Drop asm/ptrace.h from common header   Tom Rini
• [PATCH v3 16/22] common: Drop asm_offsets.h from common header   Tom Rini
• [PATCH v3 17/22] common: Drop linux/bug.h from common header   Tom Rini
• [PATCH v3 18/22] common: Drop linux/stringify.h from common header   Tom Rini
• [PATCH v3 19/22] Fix some checkpatch warnings in calls to udelay()   Tom Rini
• [PATCH v3 20/22] common: Drop linux/delay.h from common header   Tom Rini
• [PATCH v3 21/22] Use __ASSEMBLY__ as the assembly macros   Tom Rini
• [PATCH v3 22/22] common: Drop linux/bitops.h from common header   Tom Rini
• [PATCH v1 00/15] add basic driver support for broadcom NS3 soc   Rayagonda Kokatanur
• [PATCH v3 0/4] mx6cuboxi: enable support for OF_CONTROL and DM in SPL   Walter Lozano
• [PATCH v3 1/4] mx6cuboxi: enable MMC and eMMC in DT for SPL   Walter Lozano
• [PATCH v3 2/4] mx6cuboxi: customize board_boot_order to access eMMC   Walter Lozano
• [PATCH v3 3/4] mx6cuboxi: enable OF_CONTROL and DM in SPL   Walter Lozano
• [PATCH v3 4/4] mx6cuboxi: remove unused code   Walter Lozano
• [PATCH v11 01/18] misc: add driver for the SiFive otp controller   Jagan Teki
• [PATCH 4/7] rockchip: Remove ARCH= references from documentation   klaus.goger at theobroma-systems.com
• [PATCH v11 02/18] riscv: sifive: fu540: Use OTP DM driver for serial environment variable   Jagan Teki
• [PATCH v11 03/18] riscv: Add _image_binary_end for SPL   Jagan Teki
• [PATCH v11 04/18] lib: Makefile: build crc7.c when CONFIG_MMC_SPI   Jagan Teki
• [PATCH] doc: rockchip: Update documentation with Rock Pi 4   Walter Lozano
• [PATCH v11 05/18] riscv: sifive: dts: fu540: Add board -u-boot.dtsi files   Jagan Teki
• [PATCH v11 07/18] sifive: dts: fu540: Add DDR controller and phy register settings   Jagan Teki
• [PATCH v11 08/18] riscv: sifive: dts: fu540: add U-Boot dmc node   Jagan Teki
• [PATCH v11 09/18] clk: sifive: fu540-prci: Add clock enable and disable ops   Jagan Teki
• [PATCH v11 10/18] clk: sifive: fu540-prci: Add ddr clock initialization   Jagan Teki
• [PATCH v11 12/18] riscv: dts: sifive: Sync hifive-unleashed-a00 dts from linux   Jagan Teki
• [PATCH v11 13/18] riscv: cpu: fu540: Add support for cpu fu540   Jagan Teki
• [PATCH v11 14/18] riscv: sifive: fu540: add SPL configuration   Jagan Teki
• [PATCH v11 18/18] doc: sifive: fu540: Add description for OpenSBI generic platform   Jagan Teki
• [PATCH] doc: rockchip: Update documentation with Rock Pi 4   Jagan Teki
• [PATCH 1/5] mtd: spi: Call sst_write in _write ops   Jagan Teki
• [PATCH v2 0/9] riscv: sifive/fu540: Booting from SPI   Jagan Teki
• [PATCH v2 1/9] spl: Try to get SPL boot device via board_get_int   Jagan Teki
• [PATCH v2 2/9] dt-bindings: board: Document sifive,fu540-modeselect   Jagan Teki
• [PATCH v2 3/9] riscv: dts: fu540-c000-u-boot: Add sifive, fu540-modeselect   Jagan Teki
• [PATCH v2 4/9] drivers: Add fu540 board driver   Jagan Teki
• [PATCH v2 5/9] sifive: fu540: Add Booting from SPI   Jagan Teki
• [PATCH v2 6/9] env: Enable SPI flash env for SiFive FU540   Jagan Teki
• [PATCH v2 7/9] sifive: fu540: Mark the default env as SPI flash   Jagan Teki
• [PATCH v2 8/9] sifive: fu540: Add boot flash script offset, size   Jagan Teki
• [PATCH v2 9/9] sifive: fu540: Enable SF distro bootcmd   Jagan Teki
• [PATCH 2/5] cmd: sf Drop reassignment of new into flash   Jagan Teki
• [PATCH v4] net: tftp: Add client support for RFC 7440   Ramon Fried
• [PATCH 4/5] mtd: sf: Drop plat from sf_probe   Jagan Teki
• [PATCH v2 5/5] mtd: spi: Use CONFIG_IS_ENABLED to prevent ifdef   Jagan Teki
• [PATCH] doc: rockchip: Update documentation with Rock Pi 4   Walter Lozano
• [PATCH] doc: rockchip: Update documentation with Rock Pi 4   Tom Rini
• [PATCH] doc: rockchip: Update documentation with Rock Pi 4   Walter Lozano
• [PATCH v2 00/10] new rtc methods, rtc command, and tests   Rasmus Villemoes
• [PATCH v2 01/10] rtc: add rtc_read helper and ->read method   Rasmus Villemoes
• [PATCH v2 02/10] rtc: add rtc_write() helper   Rasmus Villemoes
• [PATCH v2 03/10] rtc: fall back to ->{read, write} if ->{read, write}8 are not provided   Rasmus Villemoes
• [PATCH v2 04/10] rtc: pcf2127: provide ->read method   Rasmus Villemoes
• [PATCH v2 05/10] rtc: pcf2127: provide ->write method   Rasmus Villemoes
• [PATCH v2 06/10] rtc: add rtc command   Rasmus Villemoes
• [PATCH v2 07/10] rtc: sandbox-rtc: fix set method   Rasmus Villemoes
• [PATCH v2 08/10] rtc: i2c_rtc_emul: catch any write to the "reset" register   Rasmus Villemoes
• [PATCH v2 09/10] test: dm: rtc: add test of rtc_read, rtc_write   Rasmus Villemoes
• [PATCH v2 10/10] test: dm: rtc: add tests of rtc shell command   Rasmus Villemoes
• [PATCH 2/2] thermal: imx_scu_thermal: fix getting DT alert property value   Anatolij Gustschin
• [PATCH v2 1/2] spi: call WATCHDOG_RESET() in spi_nor_wait_till_ready_with_timeout()   Rasmus Villemoes
• [PATCH 00/26] x86: video: Speed up the framebuffer   Simon Glass
• [PATCH 01/26] x86: fsp: Reinit the FPU after FSP meminit   Simon Glass
• [PATCH 02/26] console: Add a way to output to serial only   Simon Glass
• [PATCH 03/26] video: Show an error when a vidconsole function fails   Simon Glass
• [PATCH 04/26] sandbox: video: Allow selection of rotated console   Simon Glass
• [PATCH 05/26] video: Split out expression parts into variables   Simon Glass
• [PATCH 06/26] video: Adjust rotated console to start at right edge   Simon Glass
• [PATCH 07/26] video: Drop unnecessary #ifdef around vid_console_color()   Simon Glass
• [PATCH 08/26] video: Add a comment for struct video_uc_platdata   Simon Glass
• [PATCH 09/26] video: Add support for copying to a hardware framebuffer   Simon Glass
• [PATCH 10/26] video: Set up the copy framebuffer when enabled   Simon Glass
• [PATCH 11/26] video: Clear the copy framebuffer when clearing the screen   Simon Glass
• [PATCH 12/26] video: Add helpers for vidconsole for the copy framebuffer   Simon Glass
• [PATCH 13/26] video: Update normal console to support copy buffer   Simon Glass
• [PATCH 14/26] video: Update truetype console to support copy buffer   Simon Glass
• [PATCH 15/26] video: Update rotated console to support copy buffer   Simon Glass
• [PATCH 16/26] video: Update the copy framebuffer when writing bitmaps   Simon Glass
• [PATCH 17/26] video: Add comments to struct sandbox_sdl_plat   Simon Glass
• [PATCH 18/26] video: sandbox: Add support for the copy framebuffer   Simon Glass
• [PATCH 19/26] video: pci: Set up the copy framebuffer   Simon Glass
• [PATCH 20/26] x86: fsp: video: Allocate a frame buffer when needed   Simon Glass
• [PATCH 21/26] video: Correctly handle multiple framebuffers   Simon Glass
• [PATCH 22/26] x86: video: Support copy framebuffer with probed devices   Simon Glass
• [PATCH 23/26] x86: chromebook_samus: Enable the copy framebuffer   Simon Glass
• [PATCH 24/26] x86: chromebook_link: Enable the copy framebuffer   Simon Glass
• [PATCH 25/26] x86: minnowmax: Enable the copy framebuffer   Simon Glass
• [PATCH 26/26] x86: minnowmax: Drop screen resolution to 1024x768   Simon Glass
• U-Boot DM device tree and Linux device tree - what are the differences and why?   Rudolf J Streif
• [PATCH] cpu: imx8: use intended cpu-thermal device when getting temp value   Anatolij Gustschin
• [PATCH 2/2] thermal: imx_scu_thermal: fix getting DT alert property value   Anatolij Gustschin
• PINE64 Rock64 - How to get SPI driver working   Johannes Krottmayer
• [PATCH] psci: add 'static inline' to invoke_psci_fn() stub   Masahiro Yamada
• patman: ImportError   Simon Glass
• [PATCH v2] patman: Avoid circular dependency between command and tools   Simon Glass
• [PATCH v1 2/3] board: ns3: add FIT image its file   Thomas Fitzsimmons
• [PING][PATCH] Optionally: Set the serial# environment variable on the i.MX7.   Mark G
• [PATCH v1 00/15] add basic driver support for broadcom NS3 soc   Thomas Fitzsimmons
• [PATCH v1 1/3] board: ns3: add optee based bnxt fw load driver   Thomas Fitzsimmons
• [PATCH] cpu: imx8: use intended cpu-thermal device when getting temp value   Peng Fan
• [PATCH] ARM: add psci_arch_init() declaration for CONFIG_ARMV7_PSCI   Masahiro Yamada
• [PATCH v5 1/3] gpio-uclass.c: save the GPIOD flags also in the gpio descriptor   Simon Glass
• [PATCH v5 2/3] sandbox, test: add test for GPIO_HOG function   Simon Glass
• [PATCH v5 3/3] gpio: search for gpio label if gpio is not found through bank name   Simon Glass
• U-CLASS SPI Bus and Devices   Simon Glass
• [PATCH v3 2/7] uart: pl011: Add proper DM clock support   Simon Glass
• [PATCH 05/10] x86: Convert from ACCESS_ONCE to READ/WRITE_ONCE   Simon Glass
• [RFC 1/6] dtoc: add support to scan drivers   Simon Glass
• [RFC 2/6] core: extend struct driver_info to point to device   Simon Glass
• [RFC 0/6] improve OF_PLATDATA support   Simon Glass
• [RFC 3/6] dtoc: extend dtoc to use struct driver_info when linking nodes   Simon Glass
• [RFC 4/6] dtoc: update tests to match new platdata   Simon Glass
• [RFC 5/6] dtoc: update dtb_platdata to support cd-gpios   Simon Glass
• [RFC 6/6] dtoc add test for cd-gpios   Simon Glass
• [PATCH] ARM: add psci_arch_init() declaration for CONFIG_ARMV7_PSCI   Simon Glass
• [PATCH v11 00/18] RISC-V SiFive FU540 support SPL   Rick Chen
• [PATCH 1/6] ARM: uniphier: include <asm/system.h> instead of <asm/cache.h> from psci.c   Masahiro Yamada
• [PATCH 2/6] ARM: uniphier: remove #include <net.h> again from micro-support-card.c   Masahiro Yamada
• [PATCH 3/6] ARM: uniphier: drop #include <init.h> again from umc-pxs2.c   Masahiro Yamada
• [PATCH 4/6] ARM: uniphier: drop #include <log.h> again   Masahiro Yamada
• [PATCH 5/6] ARM: uniphier: delete or replace <common.h> includes   Masahiro Yamada
• [PATCH 6/6] ARM: uniphier: remove board_eth_init()   Masahiro Yamada
• [PATCH] ARM: add psci_arch_init() declaration for CONFIG_ARMV7_PSCI   Masahiro Yamada
• rockpro64: Enable HDMI output   Anand Moon
• [PATCH] serial: Add riscv_sbi console support   光
• [PATCH] riscv: Add Nuclei Hummingbird (UX600) platform support   光
• [PATCH v1 2/3] board: ns3: add FIT image its file   Pramod Kumar
• [PATCH v10 17/18] configs: fu540: Add config options for U-Boot SPL   Bin Meng
• pull request of u-boot-fsl-qoriq for v2020.07   Priyanka Jain
• [PATCH v1 00/15] add basic driver support for broadcom NS3 soc   Rayagonda Kokatanur
• [PATCH 1/2] serial: Add riscv_sbi console support   Kongou Hikari
• [PATCH 2/2] riscv: Add Nuclei Hummingbird (UX600) platform support   Kongou Hikari
• PINE64 Rock64 - How to get SPI driver working   Kamal R. Prasad
• [PATCH v11 00/18] RISC-V SiFive FU540 support SPL   Sean Anderson
• [PATCH] serial: Corrected riscv_sbi console flag to ensure it loads at first time   Kongou Hikari
• [PATCH v11 00/18] RISC-V SiFive FU540 support SPL   Bin Meng
• [PATCH 1/2] fdtdec: Fix the types of addr and size in fdtdec_add_reserved_memory()   Bin Meng
• [PATCH 2/2] fdtdec: Honor #address-cells and #size-cells in fdtdec_add_reserved_memory()   Bin Meng
• [PATCH v11 00/18] RISC-V SiFive FU540 support SPL   Sean Anderson
• [PATCH v11 00/21] riscv: Add Sipeed Maix support   Sean Anderson
• [PATCH v11 01/21] clk: Always use the supplied struct clk   Sean Anderson
• [PATCH v11 02/21] clk: Check that ops of composite clock components exist before calling   Sean Anderson
• [PATCH v11 03/21] clk: Unconditionally recursively en-/dis-able clocks   Sean Anderson
• [PATCH v11 04/21] clk: Fix clk_get_by_* handling of index   Sean Anderson
• [PATCH v11 05/21] clk: Add K210 pll support   Sean Anderson
• [PATCH v11 06/21] clk: Add a bypass clock for K210   Sean Anderson
• [PATCH v11 07/21] clk: Add K210 clock support   Sean Anderson
• [PATCH v11 08/21] dm: Add support for simple-pm-bus   Sean Anderson
• [PATCH v11 09/21] dm: Fix error handling for dev_read_addr_ptr   Sean Anderson
• [PATCH v11 10/21] reset: Add generic reset driver   Sean Anderson
• [PATCH v11 11/21] lib: Always set errno in hcreate_r   Sean Anderson
• [PATCH v11 12/21] riscv: Add headers for asm/global_data.h   Sean Anderson
• [PATCH v11 13/21] riscv: Clear pending interrupts before enabling IPIs   Sean Anderson
• [PATCH v11 14/21] riscv: Clean up IPI initialization code   Sean Anderson
• [PATCH v11 15/21] riscv: Add option to support RISC-V privileged spec 1.9   Sean Anderson
• [PATCH v11 16/21] riscv: Allow use of reset drivers   Sean Anderson
• [PATCH v11 17/21] riscv: Try to get cpu frequency from a "clocks" node if it exists   Sean Anderson
• [PATCH v11 18/21] riscv: Enable cpu clock if it is present   Sean Anderson
• [PATCH v11 19/21] riscv: Add device tree for K210 and Sipeed Maix BitM   Sean Anderson
• [PATCH v11 20/21] doc: riscv: Add documentation for Sipeed Maix Bit   Sean Anderson
• [PATCH v11 21/21] riscv: Add Sipeed Maix support   Sean Anderson
• [PATCH v11 00/18] RISC-V SiFive FU540 support SPL   Bin Meng
• [PATCH] bootcount_ext: Add Ext4 build dependency   Frédéric Danis
• [PATCH v10 17/18] configs: fu540: Add config options for U-Boot SPL   Pragnesh Patel
• [PATCH v11 00/18] RISC-V SiFive FU540 support SPL   Pragnesh Patel
• [PATCH v11 17/18] configs: fu540: Add config options for U-Boot SPL   Pragnesh Patel
• [PATCH v11 00/18] RISC-V SiFive FU540 support SPL   Bin Meng
• [PATCH 1/2] riscv: Avoid the reserved memory fixup if src and dst point to the same place   Bin Meng
• [PATCH 2/2] riscv: Enable CONFIG_OF_BOARD_FIXUP by default   Bin Meng
• [PATCH v11 00/18] RISC-V SiFive FU540 support SPL   Pragnesh Patel
• [PATCH v11 14/21] riscv: Clean up IPI initialization code   Rick Chen
• [RESEND PATCH] usb: dwc3: fix NULL pointer issue   Chunfeng Yun
• [PATCH] rockchip: rk3328: rock64 - fix gen3 SPL hang   Matwey V. Kornilov
• Warnings on Edison   Andy Shevchenko
• [PATCH] Remove CROSS_COMPILE default from arch/*/config.mk   Michal Simek
• [PATCH] thermal: imx_scu_thermal: prevent boot hang with zero pdata   Anatolij Gustschin
• [PATCH] rockchip: rk3328: rock64 - fix gen3 SPL hang   Chen-Yu Tsai
• [PATCH v11 00/18] RISC-V SiFive FU540 support SPL   Bin Meng
• [PATCH] net: move random_port() to dns   Baruch Siach
• [PATCH 1/3] armv8: gpio: add gpio feature   Hui Song
• [PATCH 2/3] dm: armv8: gpio: include <asm/arch/gpio.h> for fsl-layerscape   Hui Song
• [PATCH 3/3] gpio: mpc8xxx: support fsl-layerscape platform.   Hui Song
• [PATCH v3 1/3] board: ls2080aqds: transition to DM_ETH   Priyanka Jain (OSS)
• [PATCH v2 1/3] arm: dts: ls1088aqds: add CONFIG_MULTI_DTB_FIT support   Priyanka Jain (OSS)
• [Patch v2] configs: ls1046a: Define ENV_ADDR value   Priyanka Jain (OSS)
• [PATCH] drivers: net: fsl-mc: fixup msi-map property   Priyanka Jain (OSS)
• [PATCH 1/4] configs: ls1012a: Increase CONFIG_SYS_MALLOC_LEN size   Priyanka Jain (OSS)
• [PATCH v2] include/configs: ls1046afrwy: add support for boot targets.   Priyanka Jain (OSS)
• [PATCH] net: fsl-mc: fixup DPC: add /board/ports node if missing   Priyanka Jain (OSS)
• [PATCH] board_r: Detect ifc-nor flash at run-time   Priyanka Jain (OSS)
• [PATCH v2 1/6] arm: dts: lx2160a: add noted for dpmacs 1, 2, 5-6   Priyanka Jain (OSS)
• [PATCH] imx: imx8qm_rom7720_a1: update README   Oliver Graute
• [PATCH] image: Add support for ZSTD decompression   Robert Marko
• [RESEND PATCH] usb: dwc3: fix NULL pointer issue   Marek Vasut
• [PATCH v2] imx: imx8qm_rom7720_a1: update README   Oliver Graute
• [PATCH v11 00/18] RISC-V SiFive FU540 support SPL   Pragnesh Patel
• rk3399: SPI boot: Return from ROM unsuccessful (with TPL)   Jagan Teki
• [PATCH] armv8: cache_v8: fix mmu_set_region_dcache_behaviour   Peng Fan
• [PATCH] mpc83xx, abb: remove suvd3 board   Tom Rini
• [PATCH] mpc83xx: remove redundant MPC83xx_RESET #define   Tom Rini
• [PATCH v2] drivers: crypto: mod_exp_sw: Re-add DM_FLAG_PRE_RELOC   Tom Rini
• [PATCH v2] test: Use ut_asserteq_mem() where possible   Tom Rini
• [PATCH v2] cmd: avb: free partition buffer upon verify completion   Tom Rini
• [PATCH] armv8: cache_v8: fix mmu_set_region_dcache_behaviour   Tom Rini
• [PATCH] image: Add support for ZSTD decompression   Tom Rini
• [PATCH v2 1/9] spl: Try to get SPL boot device via board_get_int   Tom Rini
• [PATCH 1/7] amlogic: Remove ARCH= references from documentation   Neil Armstrong
• Warnings on Edison   Tom Rini
• [PATCH v2 2/9] dt-bindings: board: Document sifive, fu540-modeselect   Bin Meng
• [PATCH v2 1/9] spl: Try to get SPL boot device via board_get_int   Jagan Teki
• Warnings on Edison   Simon Glass
• [PATCH v10 17/18] configs: fu540: Add config options for U-Boot SPL   Pragnesh Patel
• Warnings on Edison   Tom Rini
• [PATCH v10 17/18] configs: fu540: Add config options for U-Boot SPL   Bin Meng
• [PATCH v11 00/18] RISC-V SiFive FU540 support SPL   Bin Meng
• Regression when building with DEVICE_TREE parameter   Patrice CHOTARD
• [PATCH v10 17/18] configs: fu540: Add config options for U-Boot SPL   Pragnesh Patel
• [PATCH v11 00/18] RISC-V SiFive FU540 support SPL   Pragnesh Patel
• [PATCH v11 15/18] sifive: fu540: Add sample SD gpt partition layout   Bin Meng
• [PATCH v2 1/9] spl: Try to get SPL boot device via board_get_int   Tom Rini
• Warnings on Edison   Andy Shevchenko
• [PATCH 1/2] fdtdec: Fix the types of addr and size in fdtdec_add_reserved_memory()   Simon Glass
• [PATCH 2/2] fdtdec: Honor #address-cells and #size-cells in fdtdec_add_reserved_memory()   Simon Glass
• [PATCH v1 00/15] add basic driver support for broadcom NS3 soc   Simon Glass
• [PATCH 1/6] ARM: uniphier: include <asm/system.h> instead of <asm/cache.h> from psci.c   Simon Glass
• [PATCH 3/6] ARM: uniphier: drop #include <init.h> again from umc-pxs2.c   Simon Glass
• [PATCH 4/6] ARM: uniphier: drop #include <log.h> again   Simon Glass
• [PATCH 5/6] ARM: uniphier: delete or replace <common.h> includes   Simon Glass
• [PATCH v11 15/18] sifive: fu540: Add sample SD gpt partition layout   Pragnesh Patel
• Regression when building with DEVICE_TREE parameter   Masahiro Yamada
• patman: ImportError   Stefan Bosch
• [PATCH v5 1/2] usb: provide a device tree node to USB devices   Michael Walle
• [PATCH v5 2/2] dm: uclass: don't assign aliased seq numbers   Michael Walle
• [PATCH v4] dm: uclass: don't assign aliased seq numbers   Michael Walle
• [PATCH] phy: Fix possible NULL pointer deference   Vignesh Raghavendra
• [PATCH v2 2/3] spl: fit: fail fit loading in case of FDT appending error   Michael Nazzareno Trimarchi
• [PATCH] rockchip: rk3328: rock64 - fix gen3 SPL hang   Kurt Miller
• [PATCH] rockchip: rk3328: rock64 - fix gen3 SPL hang   Matwey V. Kornilov
• [PATCH] rockchip: rk3328: rock64 - fix gen3 SPL hang   Matwey V. Kornilov
• [PATCH v12 00/21] riscv: Add Sipeed Maix support   Sean Anderson
• [PATCH v12 01/21] clk: Always use the supplied struct clk   Sean Anderson
• [PATCH v12 02/21] clk: Check that ops of composite clock components exist before calling   Sean Anderson
• [PATCH v12 03/21] clk: Unconditionally recursively en-/dis-able clocks   Sean Anderson
• [PATCH v12 04/21] clk: Fix clk_get_by_* handling of index   Sean Anderson
• [PATCH v12 05/21] clk: Add K210 pll support   Sean Anderson
• [PATCH v12 06/21] clk: Add a bypass clock for K210   Sean Anderson
• [PATCH v12 07/21] clk: Add K210 clock support   Sean Anderson
• [PATCH v12 08/21] dm: Add support for simple-pm-bus   Sean Anderson
• [PATCH v12 09/21] dm: Fix error handling for dev_read_addr_ptr   Sean Anderson
• [PATCH v12 10/21] reset: Add generic reset driver   Sean Anderson
• [PATCH v12 11/21] lib: Always set errno in hcreate_r   Sean Anderson
• [PATCH v12 12/21] riscv: Add headers for asm/global_data.h   Sean Anderson
• [PATCH v12 13/21] riscv: Clear pending interrupts before enabling IPIs   Sean Anderson
• [PATCH v12 14/21] riscv: Clean up IPI initialization code   Sean Anderson
• [PATCH v12 15/21] riscv: Add option to support RISC-V privileged spec 1.9   Sean Anderson
• [PATCH v12 16/21] riscv: Allow use of reset drivers   Sean Anderson
• [PATCH v12 17/21] riscv: Try to get cpu frequency from a "clocks" node if it exists   Sean Anderson
• [PATCH v12 18/21] riscv: Enable cpu clock if it is present   Sean Anderson
• [PATCH v12 19/21] riscv: Add device tree for K210 and Sipeed Maix BitM   Sean Anderson
• [PATCH v12 20/21] doc: riscv: Add documentation for Sipeed Maix Bit   Sean Anderson
• [PATCH v12 21/21] riscv: Add Sipeed Maix support   Sean Anderson
• [PATCH 1/1] efi_loader: initialize root node first   Heinrich Schuchardt
• pull request of u-boot-fsl-qoriq for v2020.07   Tom Rini
• [PATCH 1/1] MAINTAINERS: add doc/driver-model/ to DRIVER MODEL   Heinrich Schuchardt
• [PATCH 1/1] doc: driver-model: there is no UCLASS_SATA   Heinrich Schuchardt
• [PATCH 1/1] efi_loader: device path for virtio block devices   Heinrich Schuchardt
• [PATCH 1/1] efi_loader: device path for SATA devices   Heinrich Schuchardt
• [PATCH] efi_loader: Remove unnecessary debug   AKASHI Takahiro
• [PATCH 1/1] test: stabilize test_efi_secboot   AKASHI Takahiro
• [RESEND PATCH] usb: dwc3: fix NULL pointer issue   Chunfeng Yun
• [PATCH 2/2] fdtdec: Honor #address-cells and #size-cells in fdtdec_add_reserved_memory()   Bin Meng
• [PATCH 07/13] cbfs: Unify the two header loaders   Bin Meng
• [PATCH 08/13] cbfs: Use void * for the position pointers   Bin Meng
• [PATCH 09/13] cbfs: Record the start address in cbfs_priv   Bin Meng
• [PATCH 10/13] cbfs: Return the error code from file_cbfs_init()   Bin Meng
• [PATCH v12 21/21] riscv: Add Sipeed Maix support   Rick Chen
• [PATCH 11/13] cbfs: Change file_cbfs_find_uncached() to return an error   Bin Meng
• [PATCH 12/13] cbfs: Allow reading a file from a CBFS given its base addr   Bin Meng
• [PATCH 13/13] cbfs: Don't require the CBFS size with cbfs_init_mem()   Bin Meng
• [PATCH] mmc: retry CMD1 in mmc_send_op_cond() until the eMMC is ready   BOUGH CHEN
• [PATCH 1/1] efi_loader: check device path is not installed twice   Heinrich Schuchardt
• [PATCH 1/2] serial: Add riscv_sbi console support   Bin Meng
• [PATCH 2/2] riscv: Add Nuclei Hummingbird (UX600) platform support   Bin Meng
• [PATCH] serial: Corrected riscv_sbi console flag to ensure it loads at first time   Bin Meng
• [PATCH 1/1] test: stabilize test_efi_secboot   Heinrich Schuchardt
• [PATCH 1/1] test: stabilize test_efi_secboot   AKASHI Takahiro
• [PATCH v5 1/2] usb: provide a device tree node to USB devices   Marek Vasut
• [PULL] u-boot-sh/master   Marek Vasut
• [PATCH 1/2] board: ti: am57xx: use GPIO_TO_PIN() to define GPIO number   Luca Ceresoli
• [PATCH 2/2] board: ti: use positive logic to detect idk boards   Luca Ceresoli
• [PATCH] rockchip: rk3328: rock64 - fix gen3 SPL hang   Kever Yang
• [RFC 0/6] improve OF_PLATDATA support   Walter Lozano
• [RFC 1/6] dtoc: add support to scan drivers   Walter Lozano
• [RFC 2/6] core: extend struct driver_info to point to device   Walter Lozano
• [RFC 3/6] dtoc: extend dtoc to use struct driver_info when linking nodes   Walter Lozano
• [RFC 4/6] dtoc: update tests to match new platdata   Walter Lozano
• [RFC 6/6] dtoc add test for cd-gpios   Walter Lozano
• rockpro64: Enable HDMI output   Kever Yang
• [rockchip] rockpro64: Enable HDMI output   Marcin Juszkiewicz
• PINE64 Rock64 - How to get SPI driver working   Kever Yang
• [PATCH v5 1/2] usb: provide a device tree node to USB devices   Bin Meng
• [PATCH] rockpro64: Enable HDMI output on rockpro64 board   Kever Yang
• [PATCH] board: puma: use dtb given on the commandline instead of using u-boot.dtb   Kever Yang
• [U-Boot] [ANN] Monthly developer call   Simon Glass
• [PATCH v13 00/21] riscv: Add Sipeed Maix support   Sean Anderson
• [PATCH v13 01/21] clk: Always use the supplied struct clk   Sean Anderson
• [PATCH v13 02/21] clk: Check that ops of composite clock components exist before calling   Sean Anderson
• [PATCH v13 03/21] clk: Unconditionally recursively en-/dis-able clocks   Sean Anderson
• [PATCH v13 04/21] clk: Fix clk_get_by_* handling of index   Sean Anderson
• [PATCH v13 05/21] clk: Add K210 pll support   Sean Anderson
• [PATCH v13 06/21] clk: Add a bypass clock for K210   Sean Anderson
• [PATCH v13 07/21] clk: Add K210 clock support   Sean Anderson
• [PATCH v13 08/21] dm: Add support for simple-pm-bus   Sean Anderson
• [PATCH v13 09/21] dm: Fix error handling for dev_read_addr_ptr   Sean Anderson
• [PATCH v13 10/21] reset: Add generic reset driver   Sean Anderson
• [PATCH v13 11/21] lib: Always set errno in hcreate_r   Sean Anderson
• [PATCH v13 12/21] riscv: Add headers for asm/global_data.h   Sean Anderson
• [PATCH v13 13/21] riscv: Clear pending interrupts before enabling IPIs   Sean Anderson
• [PATCH v13 14/21] riscv: Clean up IPI initialization code   Sean Anderson
• [PATCH v13 15/21] riscv: Add option to support RISC-V privileged spec 1.9   Sean Anderson
• [PATCH v13 16/21] riscv: Allow use of reset drivers   Sean Anderson
• [PATCH v13 17/21] riscv: Try to get cpu frequency from a "clocks" node if it exists   Sean Anderson
• [PATCH v13 18/21] riscv: Enable cpu clock if it is present   Sean Anderson
• [PATCH v13 19/21] riscv: Add device tree for K210 and Sipeed Maix BitM   Sean Anderson
• [PATCH v13 20/21] doc: riscv: Add documentation for Sipeed Maix Bit   Sean Anderson
• [PATCH v13 21/21] riscv: Add Sipeed Maix support   Sean Anderson
• TI boards vs. distro boot   Lokesh Vutla
• [U-Boot] [ANN] Monthly developer call   Marek Vasut
• [U-Boot] [ANN] Monthly developer call   Simon Glass
• [U-Boot] [ANN] Monthly developer call   Tom Rini
• [U-Boot] [ANN] Monthly developer call   Marek Vasut
• [U-Boot] [ANN] Monthly developer call   Simon Glass
• [U-Boot] [ANN] Monthly developer call   Marek Vasut
• [U-Boot] [ANN] Monthly developer call   Simon Glass
• [U-Boot] [ANN] Monthly developer call   Marek Vasut
• [U-Boot] [ANN] Monthly developer call   Tom Rini
• [PATCH v1 1/3] board: ns3: add optee based bnxt fw load driver   Simon Glass
• [PATCH 1/2] serial: Add riscv_sbi console support   Sean Anderson
• [PATCH] Convert CONFIG_CMD_MMC to Kconfig   Tom Rini
• [PATCH] checkpatch.pl: Add check for defining CONFIG_CMD_xxx via config files   Tom Rini
• [PULL] u-boot-sh/master   Tom Rini
• [PATCH] tools/env/fw_env.h: remove env.h   Romain Naour
• [PATCH] env: Convert ENV_ACCESS_IGNORE_FORCE to Kconfig   Marek Vasut
• PINE64 Rock64 - How to get SPI driver working   Johannes Krottmayer
• [PATCH 1/2] usb: ehci-mx6: Handle fixed regulators correctly   Marek Vasut
• [PATCH 2/2] usb: ehci-mx6: Print error code on failure   Marek Vasut
• [PATCH] ARM: imx: ddr: Fill in missing DDRC ZQCTLx on i.MX7   Marek Vasut
• [PATCH] ARM: imx: soc: Switch BOARD_EARLY_INIT_F to imply on MX7   Marek Vasut
• [PATCH] ARM: imx: soc: Select default TEXT_BASE for MX7   Marek Vasut
• [PATCH] ARM: imx: soc: Add reset for non-DM case   Marek Vasut
• [PATCH v5 1/2] usb: provide a device tree node to USB devices   Michael Walle
• [PATCH v8 1/2] mmc: ca_dw_mmc: Misc cleanup of driver   Alex Nemirovsky
• [PATCH v8 2/2] board: presidio-asic: update eMMC DT information   Alex Nemirovsky
• [PATCH v4] net: tftp: Add client support for RFC 7440   rahasij
• [PATCH v8 1/2] i2c: i2c-cortina: added CAxxxx I2C support   Alex Nemirovsky
• [PATCH v8 2/2] board: presidio-asic: Add I2C support   Alex Nemirovsky
• [PATCH v8 1/2] led: led_cortina: Add CAxxx LED support   Alex Nemirovsky
• [PATCH v8 2/2] board: presidio: add LED support   Alex Nemirovsky
• [PATCH v8 1/2] spi: ca_sflash: Add CAxxxx SPI Flash Controller   Alex Nemirovsky
• [PATCH v8 2/2] board: presidio-asic: Add SPI NOR support   Alex Nemirovsky
• rk3399 - Rock Pi 4 PCIe   Anthony Davies
• [PATCH 1/6] bootstage: Fix 'stacked' typo   Simon Glass
• [PATCH 2/6] kconfig: Add support for conditional values   Simon Glass
• [PATCH 3/6] timer: Allow delays with a 32-bit microsecond timer   Simon Glass
• [PATCH 4/6] coral: Enable the copy framebuffer   Simon Glass
• [PATCH 5/6] x86: Avoid #ifdef with CONFIG_HAVE_ACPI_RESUME   Simon Glass
• [PATCH 6/6] x86: fsp: Support a warning message when DRAM init is slow   Simon Glass
• [PATCH] mmc: davinci_mmc: Cleanup to use dt in U-boot and static platdata in SPL   Faiz Abbas
• [PATCH 2/6] kconfig: Add support for conditional values   Masahiro Yamada
• [PATCH 00/22] x86: Enhance MTRR functionality to support multiple CPUs   Simon Glass
• [PATCH 01/22] x86: mp_init: Switch to livetree   Simon Glass
• [PATCH 02/22] x86: Move MP code into mp_init   Simon Glass
• [PATCH 03/22] x86: mp_init: Avoid declarations in header files   Simon Glass
• [PATCH 04/22] x86: mp_init: Switch parameter names in start_aps()   Simon Glass
• [PATCH 05/22] x86: mp_init: Drop the num_cpus static variable   Simon Glass
• [PATCH 06/22] x86: mtrr: Fix 'ensable' typo   Simon Glass
• [PATCH 07/22] x86: mp_init: Set up the CPU numbers at the start   Simon Glass
• [PATCH 08/22] x86: mp_init: Adjust bsp_init() to return more information   Simon Glass
• [PATCH 09/22] x86: cpu: Remove unnecessary #ifdefs   Simon Glass
• [PATCH 10/22] x86: mp: Support APs waiting for instructions   Simon Glass
• [PATCH 11/22] global_data: Add a generic global_data flag for SMP state   Simon Glass
• [PATCH 12/22] x86: Set the SMP flag when MP init is complete   Simon Glass
• [PATCH 13/22] x86: mp: Allow running functions on multiple CPUs   Simon Glass
• [PATCH 14/22] x86: mp: Park CPUs before running the OS   Simon Glass
• [PATCH 15/22] x86: mp: Add iterators for CPUs   Simon Glass
• [PATCH 16/22] x86: mtrr: Use MP calls to list the MTRRs   Simon Glass
• [PATCH 17/22] x86: mtrr: Update MTRRs on all CPUs   Simon Glass
• [PATCH 18/22] x86: mtrr: Add support for writing to MTRRs on any CPU   Simon Glass
• [PATCH 19/22] x86: mtrr: Update the command to use the new mtrr calls   Simon Glass
• [PATCH 20/22] x86: mtrr: Restructure so command execution is in one place   Simon Glass
• [PATCH 21/22] x86: mtrr: Update 'mtrr' to allow setting MTRRs on any CPU   Simon Glass
• [PATCH 22/22] x86: mtrr: Enhance 'mtrr' command to list MTRRs on any CPU   Simon Glass
• [PATCH v3 1/5] patman: Drop unnecessary import in gitutil   Simon Glass
• [PATCH v3 2/5] patman: Avoid circular dependency between command and tools   Simon Glass
• [PATCH v3 3/5] patman: Use a dict in gitutil to avoid importing series   Simon Glass
• [PATCH v3 4/5] patman: Pass in maintainer dirs to avoid and import   Simon Glass
• [PATCH v3 5/5] patman: Avoid importing gitutil in settings   Simon Glass
• [GIT PULL] UniPhier SoC updates for v2020.07   Masahiro Yamada
• [PATCH v5 1/2] usb: provide a device tree node to USB devices   Simon Glass
• Cortina Package 2 driver split up   Simon Glass
• [PATCH 12/13] cbfs: Allow reading a file from a CBFS given its base addr   Simon Glass
• [PATCH v2 00/13] x86: cbfs: Various clean-ups to CBFS implementation   Simon Glass
• [PATCH v2 01/13] cbfs: Rename the result variable   Simon Glass
• [PATCH v2 02/13] cbfs: Use ulong consistently   Simon Glass
• [PATCH v2 03/13] cbfs: Use bool type for whether initialised   Simon Glass
• [PATCH v2 04/13] cbfs: Adjust return value of file_cbfs_next_file()   Simon Glass
• [PATCH v2 05/13] cbfs: Adjust file_cbfs_load_header() to use cbfs_priv   Simon Glass
• [PATCH v2 06/13] cbfs: Adjust cbfs_load_header_ptr() to use cbfs_priv   Simon Glass
• [PATCH v2 07/13] cbfs: Unify the two header loaders   Simon Glass
• [PATCH v2 08/13] cbfs: Use void * for the position pointers   Simon Glass
• [PATCH v2 09/13] cbfs: Record the start address in cbfs_priv   Simon Glass
• [PATCH v2 10/13] cbfs: Return the error code from file_cbfs_init()   Simon Glass
• [PATCH v2 11/13] cbfs: Change file_cbfs_find_uncached() to return an error   Simon Glass
• [PATCH v2 12/13] cbfs: Allow reading a file from a CBFS given its base addr   Simon Glass
• [PATCH v2 13/13] cbfs: Don't require the CBFS size with cbfs_init_mem()   Simon Glass
• [PATCH v3 6/6] rockchip: Enable PCIe/M.2 on rock960 board   Kever Yang
• Issue with 'ubi part' ubi_io_read: error -74 (ECC error)   Heiko Schocher
• [RFC PATCH v3 3/3] rpi4: add a mapping for the PCIe XHCI controller MMIO registers (ARM 32bit)   Marek Szyprowski
• [PATCH 1/1] test: stabilize test_efi_secboot   Heinrich Schuchardt
• [PATCH 2/6] kconfig: Add support for conditional values   Heinrich Schuchardt
• Pull request for UEFI sub-system for efi-2020-07-rc3 (2)   Heinrich Schuchardt
• TI boards vs. distro boot   Jan Kiszka
• [PATCH v3 6/6] rockchip: Enable PCIe/M.2 on rock960 board   Jagan Teki
• [PATCH v4 6/6] rockchip: Enable PCIe/M.2 on rock960 board   Jagan Teki
• [PATCH v5 1/2] usb: provide a device tree node to USB devices   Michael Walle
• [PATCH] spi: cadence_spi: Add octal and quad write support   Ley Foon Tan
• [PATCH u-boot 0/2] eth/r8152: minor corrections   Hayes Wang
• [PATCH u-boot 1/2] eth/r8152: fix assigning the wrong endpoint   Hayes Wang
• [PATCH u-boot 2/2] eth/r8152: fix typo in register name   Hayes Wang
• [PATCH] arm: mach-k3: j721e_init: Add support for backup boot modes   Vignesh Raghavendra
• [PATCH v6 0/3] gpio: add possibility to search for gpio label name   Heiko Schocher
• [PATCH v6 1/3] gpio-uclass.c: save the GPIOD flags also in the gpio descriptor   Heiko Schocher
• [PATCH v6 2/3] sandbox, test: add test for GPIO_HOG function   Heiko Schocher
• [PATCH v6 3/3] gpio: search for gpio label if gpio is not found through bank name   Heiko Schocher
• [PATCH v1 1/3] board: ns3: add optee based bnxt fw load driver   Rayagonda Kokatanur
• [PATCH v1 1/3] board: ns3: add optee based bnxt fw load driver   Rayagonda Kokatanur
• [PATCH v2] drivers: crypto: mod_exp_sw: Re-add DM_FLAG_PRE_RELOC   Heinrich Schuchardt
• [PATCH 0/7] mmc: zynqmp_sdhci: Add support for Tap delay   Michal Simek
• [PATCH 1/7] Revert "mmc: zynq: parse dt when probing"   Michal Simek
• [PATCH 2/7] mmc: zynq_sdhci: Define timing macro's   Michal Simek
• [PATCH 3/7] mmc: zynq_sdhci: Move macro to the top   Michal Simek
• [PATCH 4/7] mmc: zynq_sdhci: Read clock phase delays from dt   Michal Simek
• [PATCH 5/7] mmc: zynq_sdhci: Set tapdelays based on clk phase delays   Michal Simek
• [PATCH 6/7] mmc: zynq_sdhci: Add clock phase delays for Versal   Michal Simek
• [PATCH 7/7] mmc: zynq_sdhci: Extend UHS timings till hs200   Michal Simek
• [PATCH v2] drivers: crypto: mod_exp_sw: Re-add DM_FLAG_PRE_RELOC   Jan Kiszka
• [PATCH 00/22] x86: Enhance MTRR functionality to support multiple CPUs   Andy Shevchenko
• [PATCH v2] drivers: crypto: mod_exp_sw: Re-add DM_FLAG_PRE_RELOC   Heinrich Schuchardt
• [PATCH 0/4] cmd: {zip, unzip} fixes   Michael Walle
• [PATCH 1/4] cmd: unzip: automatically select CONFIG_GZIP   Michael Walle
• [PATCH 2/4] cmd: zip: automatically pull in gzip()   Michael Walle
• [PATCH 3/4] cmd: zip: fix implicit declaration warning   Michael Walle
• [PATCH 4/4] sandbox: move compression option to Kconfig   Michael Walle
• [GIT PULL] Pull request: u-boot-imx u-boot-imx-20200511   Anatolij Gustschin
• [U-Boot] How to enable USB Mass Storage   Diego Rondini
• Issue with 'ubi part' ubi_io_read: error -74 (ECC error)   Jupiter
• [PATCH v2] drivers: crypto: mod_exp_sw: Re-add DM_FLAG_PRE_RELOC   Jan Kiszka
• rk3399 - Rock Pi 4 PCIe   Mark Kettenis
• [PATCH v4 00/20] mtd: spi-nor-core: add xSPI Octal DTR support   Pratyush Yadav
• [PATCH v4 01/20] spi: spi-mem: allow specifying whether an op is DTR or not   Pratyush Yadav
• [PATCH v4 02/20] spi: spi-mem: allow specifying a command's extension   Pratyush Yadav
• [PATCH v4 03/20] spi: cadence-qspi: Do not calibrate when device tree sets read delay   Pratyush Yadav
• [PATCH v4 04/20] spi: cadence-qspi: Add support for octal DTR flashes   Pratyush Yadav
• [PATCH v4 05/20] mtd: spi-nor-core: Add a ->setup() hook   Pratyush Yadav
• [PATCH v4 06/20] mtd: spi-nor-core: Move SFDP related declarations to top   Pratyush Yadav
• [PATCH v4 07/20] mtd: spi-nor-core: Introduce flash-specific fixup hooks   Pratyush Yadav
• [PATCH v4 08/20] mtd: spi-nor-core: Rework hwcaps selection   Pratyush Yadav
• [PATCH v4 09/20] mtd: spi-nor-core: Add support for DTR protocol   Pratyush Yadav
• [PATCH v4 10/20] mtd: spi-nor-core: prepare BFPT parsing for JESD216 rev D   Pratyush Yadav
• [PATCH v4 11/20] mtd: spi-nor-core: Get command opcode extension type from BFPT   Pratyush Yadav
• [PATCH v4 12/20] mtd: spi-nor-core: Parse xSPI Profile 1.0 table   Pratyush Yadav
• [PATCH v4 13/20] mtd: spi-nor-core: Prepare Read SR and FSR for Octal DTR mode   Pratyush Yadav
• [PATCH v4 14/20] mtd: spi-nor-core: Enable octal DTR mode when possible   Pratyush Yadav
• [PATCH v4 15/20] mtd: spi-nor-core: Do not make invalid quad enable fatal   Pratyush Yadav
• [PATCH v4 16/20] mtd: spi-nor-core: Detect Soft Reset sequence support from BFPT   Pratyush Yadav
• [PATCH v4 17/20] mtd: spi-nor-core: Perform a Soft Reset on shutdown   Pratyush Yadav
• [PATCH v4 18/20] mtd: spi-nor-core: Perform a Soft Reset on boot   Pratyush Yadav
• [PATCH v4 19/20] mtd: spi-nor-core: Add support for Cypress Semper flash   Pratyush Yadav
• [PATCH v4 20/20] mtd: spi-nor-core: Allow using Micron mt35xu512aba in Octal DTR mode   Pratyush Yadav
• Pull request: u-boot-rockchip-20200522   Kever Yang
• Pull request: u-boot-rockchip-20200522   Peter Robinson
• [PATCH u-boot 1/2] eth/r8152: fix assigning the wrong endpoint   Marek Vasut
• [PATCH u-boot 2/2] eth/r8152: fix typo in register name   Marek Vasut
• [PATCH 00/22] x86: Enhance MTRR functionality to support multiple CPUs   Simon Glass
• [PATCH v5 1/2] usb: provide a device tree node to USB devices   Simon Glass
• [RFC PATCH v3 3/3] rpi4: add a mapping for the PCIe XHCI controller MMIO registers (ARM 32bit)   Simon Glass
• [PATCH 03/26] video: Show an error when a vidconsole function fails   Anatolij Gustschin
• [PATCH 04/26] sandbox: video: Allow selection of rotated console   Anatolij Gustschin
• [PATCH 05/26] video: Split out expression parts into variables   Anatolij Gustschin
• [PATCH 06/26] video: Adjust rotated console to start at right edge   Anatolij Gustschin
• [PATCH 07/26] video: Drop unnecessary #ifdef around vid_console_color()   Anatolij Gustschin
• [PATCH 08/26] video: Add a comment for struct video_uc_platdata   Anatolij Gustschin
• [PATCH v4 1/8] lib: rsa: distinguish between tpl and spl for CONFIG_RSA_VERIFY   Heiko Stuebner
• [PATCH v4 2/8] lib: rsa: take spl/non-spl into account when building rsa_verify_with_pkey()   Heiko Stuebner
• [PATCH v4 3/8] lib: rsa: bring exp_len in line when generating a key_prop   Heiko Stuebner
• [PATCH v4 4/8] lib: rsa: fix allocated size for rr and rrtmp in rsa_gen_key_prop()   Heiko Stuebner
• [PATCH v4 5/8] lib: rsa: free local arrays after use in rsa_gen_key_prop()   Heiko Stuebner
• [PATCH v4 6/8] lib: rsa: add documentation to padding_pss_verify to document limitations   Heiko Stuebner
• [PATCH v4 7/8] spl: fit: select SPL_HASH_SUPPORT for SPL_FIT_SIGNATURE   Heiko Stuebner
• [PATCH v4 8/8] spl: fit: select SPL_CRYPTO_SUPPORT for SPL_FIT_SIGNATURE   Heiko Stuebner
• [PATCH 0/3] doc: rockchip: Improve documentation   Walter Lozano
• [PATCH 1/3] doc: board: rockchip: Improve supported board list format   Walter Lozano
• [PATCH 2/3] doc: board: rockchip: Add missing supported boards   Walter Lozano
• [PATCH 3/3] doc: rockchip: Remove list of supported boards   Walter Lozano
• [PATCH v5 1/8] lib: rsa: distinguish between tpl and spl for CONFIG_RSA_VERIFY   Heiko Stuebner
• [PATCH v5 2/8] lib: rsa: take spl/non-spl into account when building rsa_verify_with_pkey()   Heiko Stuebner
• [PATCH v5 3/8] lib: rsa: bring exp_len in line when generating a key_prop   Heiko Stuebner
• [PATCH v5 4/8] lib: rsa: fix allocated size for rr and rrtmp in rsa_gen_key_prop()   Heiko Stuebner
• [PATCH v5 5/8] lib: rsa: free local arrays after use in rsa_gen_key_prop()   Heiko Stuebner
• [PATCH v5 6/8] lib: rsa: add documentation to padding_pss_verify to document limitations   Heiko Stuebner
• [PATCH v5 7/8] spl: fit: select SPL_HASH_SUPPORT for SPL_FIT_SIGNATURE   Heiko Stuebner
• [PATCH v5 8/8] spl: fit: select SPL_CRYPTO_SUPPORT for SPL_FIT_SIGNATURE   Heiko Stuebner
• [PATCH] lib: rsa: function to verify a signature against a hash   Heiko Stuebner
• [PATCH v4 3/8] lib: rsa: bring exp_len in line when generating a key_prop   Philipp Tomsich
• [PATCH v4 2/8] lib: rsa: take spl/non-spl into account when building rsa_verify_with_pkey()   Philipp Tomsich
• [PATCH 2/6] kconfig: Add support for conditional values   Simon Glass
• [PATCH v8 1/2] led: led_cortina: Add CAxxx LED support   Simon Glass
• [PATCH 2/2] sf: Simplify probe for dm code   Simon Glass
• [PATCH v4 6/8] lib: rsa: add documentation to padding_pss_verify to document limitations   Philipp Tomsich
• [PATCH v4 5/8] lib: rsa: free local arrays after use in rsa_gen_key_prop()   Philipp Tomsich
• PINE64 Rock64 - How to get SPI driver working   Peter Robinson
• [PATCH 2/2] sf: Simplify probe for dm code   Tom Rini
• [PATCH 2/2] sf: Simplify probe for dm code   Jagan Teki
• [PATCH 09/26] video: Add support for copying to a hardware framebuffer   Anatolij Gustschin
• [PATCH 10/26] video: Set up the copy framebuffer when enabled   Anatolij Gustschin
• [PATCH 11/26] video: Clear the copy framebuffer when clearing the screen   Anatolij Gustschin
• [PATCH v2] drivers: crypto: mod_exp_sw: Re-add DM_FLAG_PRE_RELOC   Heinrich Schuchardt
• [PATCH 1/4] cmd: unzip: automatically select CONFIG_GZIP   Heinrich Schuchardt
• [PATCH 12/26] video: Add helpers for vidconsole for the copy framebuffer   Anatolij Gustschin
• [PATCH 13/26] video: Update normal console to support copy buffer   Anatolij Gustschin
• [PATCH v2] drivers: crypto: mod_exp_sw: Re-add DM_FLAG_PRE_RELOC   Jan Kiszka
• [PATCH 14/26] video: Update truetype console to support copy buffer   Anatolij Gustschin
• [PATCH 15/26] video: Update rotated console to support copy buffer   Anatolij Gustschin
• [PATCH 00/26] x86: video: Speed up the framebuffer   Bin Meng
• [PATCH 16/26] video: Update the copy framebuffer when writing bitmaps   Anatolij Gustschin
• [PATCH 17/26] video: Add comments to struct sandbox_sdl_plat   Anatolij Gustschin
• [PATCH 18/26] video: sandbox: Add support for the copy framebuffer   Anatolij Gustschin
• [PATCH 19/26] video: pci: Set up the copy framebuffer   Anatolij Gustschin
• [PATCH 20/26] x86: fsp: video: Allocate a frame buffer when needed   Anatolij Gustschin
• [PATCH 21/26] video: Correctly handle multiple framebuffers   Anatolij Gustschin
• [PATCH 22/26] x86: video: Support copy framebuffer with probed devices   Anatolij Gustschin
• [PATCH 23/26] x86: chromebook_samus: Enable the copy framebuffer   Anatolij Gustschin
• [PATCH 24/26] x86: chromebook_link: Enable the copy framebuffer   Anatolij Gustschin
• [PATCH 25/26] x86: minnowmax: Enable the copy framebuffer   Anatolij Gustschin
• [PATCH v2 1/9] spl: Try to get SPL boot device via board_get_int   Jagan Teki
• [PATCH] mmc: fsl_esdhc: Fix SDR104 and HS200 support   Marek Vasut
• [PATCH] mmc: fsl_esdhc: Gracefully fail on unsupported voltage switch   Marek Vasut
• [PATCH v3 00/13] x86: cbfs: Various clean-ups to CBFS implementation   Simon Glass
• [PATCH v3 01/13] cbfs: Rename the result variable   Simon Glass
• [PATCH v3 02/13] cbfs: Use ulong consistently   Simon Glass
• [PATCH v3 03/13] cbfs: Use bool type for whether initialised   Simon Glass
• [PATCH v3 04/13] cbfs: Adjust return value of file_cbfs_next_file()   Simon Glass
• [PATCH v3 05/13] cbfs: Adjust file_cbfs_load_header() to use cbfs_priv   Simon Glass
• [PATCH v3 06/13] cbfs: Adjust cbfs_load_header_ptr() to use cbfs_priv   Simon Glass
• [PATCH v3 07/13] cbfs: Unify the two header loaders   Simon Glass
• [PATCH v3 08/13] cbfs: Use void * for the position pointers   Simon Glass
• [PATCH v3 09/13] cbfs: Record the start address in cbfs_priv   Simon Glass
• [PATCH v3 10/13] cbfs: Return the error code from file_cbfs_init()   Simon Glass
• [PATCH v3 11/13] cbfs: Change file_cbfs_find_uncached() to return an error   Simon Glass
• [PATCH v3 12/13] cbfs: Allow reading a file from a CBFS given its base addr   Simon Glass
• [PATCH v3 13/13] cbfs: Don't require the CBFS size with cbfs_init_mem()   Simon Glass
• [PATCH v3 00/13] x86: cbfs: Various clean-ups to CBFS implementation   Simon Glass
• [PATCH 01/13] cbfs: Rename the result variable   Simon Glass
• [PATCH 03/13] cbfs: Use bool type for whether initialised   Simon Glass
• [PATCH 00/26] x86: video: Speed up the framebuffer   Simon Glass
• [PATCH v6 1/2] usb: provide a device tree node to USB devices   Michael Walle
• [PATCH v6 2/2] dm: uclass: don't assign aliased seq numbers   Michael Walle
• [PATCH] libfdt: Remove superfluous NUL character from overlay symbols   Marcus Comstedt
• [PATCH 2/2] sf: Simplify probe for dm code   Simon Glass
• [PATCH] Clean up the Spansion/Cypress/Infineon device ID table   bacem.daassi at gmail.com
• [PATCH v2] board: nitrogen6x: migrate to CONFIG_DM_VIDEO   Troy Kisky
• [PATCH 2/2] sf: Simplify probe for dm code   Tom Rini
• Warnings on Edison   Ferry Toth
• [PATCH 0/5] Enable I2C in SPL, support runtime detection of add-on board   sunil at amarulasolutions.com
• [PATCH 1/5] rockchip: spl: Move board_early_init_f after cpu timer   sunil at amarulasolutions.com
• [PATCH 2/5] roc-pc-rk3399: Enable I2C in SPL for add-on board detection   sunil at amarulasolutions.com
• [PATCH 3/5] roc-pc-rk3399: Add support for add-on board run-time detection   sunil at amarulasolutions.com
• [PATCH 4/5] rk3399: drop ROC-RK3399-PC Mezzanine board   sunil at amarulasolutions.com
• [PATCH 5/5] roc-pc-rk3399: Enable PCIe/M.2, NVMe   sunil at amarulasolutions.com
• [PATCH v2] drivers: crypto: mod_exp_sw: Re-add DM_FLAG_PRE_RELOC   Heinrich Schuchardt
• [PATCH 4/5] rk3399: drop ROC-RK3399-PC Mezzanine board   Jagan Teki
• [PATCH 5/5] roc-pc-rk3399: Enable PCIe/M.2, NVMe   Jagan Teki
• [PATCH] rockchip: Fix spl mmc boot device ofpath   sunil at amarulasolutions.com
• [PATCH v4] net: tftp: Add client support for RFC 7440   Ramon Fried
• [GIT PULL] UniPhier SoC updates for v2020.07   Tom Rini
• Pull request for UEFI sub-system for efi-2020-07-rc3 (2)   Tom Rini
• [GIT PULL] Pull request: u-boot-imx u-boot-imx-20200511   Tom Rini
• Pull request: u-boot-rockchip-20200522   Tom Rini
• [PATCH 1/2] cpu: imx8: fix type and rate detection   Anatolij Gustschin
• [PATCH] cpu: imx8: use intended cpu-thermal device when getting temp value   Anatolij Gustschin
• [PATCH] thermal: imx_scu_thermal: prevent boot hang with zero pdata   Anatolij Gustschin
• [PATCH v2 1/9] spl: Try to get SPL boot device via board_get_int   Tom Rini
• [PATCH 3/3] doc: rockchip: Remove list of supported boards   Ezequiel Garcia
• [PATCH 0/6] checkpatch.pl: Add features to help improve U-Boot code   Simon Glass
• [PATCH 1/6] checkpatch.pl: Update to v5.7-rc6   Simon Glass
• [PATCH 2/6] checkpatch.pl: Add a U-Boot option   Simon Glass
• [PATCH 3/6] checkpatch.pl: Add a check for tests needed for uclasses   Simon Glass
• [PATCH 4/6] checkpatch.pl: Warn if the flattree API is used   Simon Glass
• [PATCH 5/6] checkpatch.pl: Request a test when a new command is added   Simon Glass
• [PATCH 6/6] checkpatch.pl: Request if() instead #ifdef   Simon Glass
• [PATCH 3/3] doc: rockchip: Remove list of supported boards   Walter Lozano
• [PATCH v2] board: nitrogen6x: migrate to CONFIG_DM_VIDEO   Anatolij Gustschin
• [PATCH] armv8: layerscape: fix spin-table support   Michael Walle
• [PATCH 00/26] x86: video: Speed up the framebuffer   Bin Meng
• [PATCH] checkpatch.pl: Add check for defining CONFIG_CMD_xxx via config files   Simon Glass
• [PATCH 2/4] cmd: zip: automatically pull in gzip()   Simon Glass
• [PATCH 3/4] cmd: zip: fix implicit declaration warning   Simon Glass
• [PATCH] armv8: layerscape: pretty print info about SMP cores   Michael Walle
• [PATCH 4/4] sandbox: move compression option to Kconfig   Simon Glass
• [PATCH v6 1/3] gpio-uclass.c: save the GPIOD flags also in the gpio descriptor   Simon Glass
• [PATCH v4 4/8] lib: rsa: fix allocated size for rr and rrtmp in rsa_gen_key_prop()   Simon Glass
• [PATCH 1/3] doc: board: rockchip: Improve supported board list format   Simon Glass
• [PATCH 2/3] doc: board: rockchip: Add missing supported boards   Simon Glass
• [PATCH v6 1/2] usb: provide a device tree node to USB devices   Simon Glass
• [PATCH] libfdt: Remove superfluous NUL character from overlay symbols   Simon Glass
• [PATCH 3/3] doc: rockchip: Remove list of supported boards   Simon Glass
• [PATCH 1/1] doc: driver-model: there is no UCLASS_SATA   Simon Glass
• [PATCH 1/1] MAINTAINERS: add doc/driver-model/ to DRIVER MODEL   Simon Glass
• [RFC 1/6] dtoc: add support to scan drivers   Simon Glass
• [RFC 2/6] core: extend struct driver_info to point to device   Simon Glass
• [PATCH 00/26] x86: video: Speed up the framebuffer   Simon Glass
• [PULL] u-boot-socfpga/net   Marek Vasut
• [PULL] u-boot-usb/master   Marek Vasut
• [PATCH] tbs2910: migrate to DM_VIDEO   Anatolij Gustschin
• rk3399 - Rock Pi 4 PCIe   Anthony Davies
• [PATCH 0/5] Enable I2C in SPL, support runtime detection of add-on board   Chen-Yu Tsai
• [PATCH] net: tftp: fix progress marker for file transfer   Ramon Fried
• [PATCH] net: tftp: fix option validation as per RFCs   Ramon Fried
• [PATCH] tbs2910: migrate to DM_VIDEO   Soeren Moch
• [PATCH 1/1] doc: dfu: describe eMMC partition number parameter   Heinrich Schuchardt
• [PATCH 1/1] doc: dfu: add DFU to HTML documentation   Heinrich Schuchardt
• [PATCH 1/1] doc: dfu: fix typos in README.dfu   Heinrich Schuchardt
• [PATCH 1/1] doc: dfu: fix typos in README.dfu   Andy Shevchenko
• [PATCH] libfdt: Remove superfluous NUL character from overlay symbols   Marcus Comstedt
• [PATCH] rockchip: enable RNG on RockPro64   Marcin Juszkiewicz
• [PATCH 1/1] doc: dfu: describe more DFU function   Heinrich Schuchardt
• [PATCH v3 03/13] cbfs: Use bool type for whether initialised   Bin Meng
• [PATCH v3 04/13] cbfs: Adjust return value of file_cbfs_next_file()   Bin Meng
• [PATCH v3 07/13] cbfs: Unify the two header loaders   Bin Meng
• [PATCH v3 11/13] cbfs: Change file_cbfs_find_uncached() to return an error   Bin Meng
• [PATCH v3 12/13] cbfs: Allow reading a file from a CBFS given its base addr   Bin Meng
• [PULL] u-boot-socfpga/net   Tom Rini
• [PULL] u-boot-usb/master   Tom Rini
• [PATCH] libfdt: Remove superfluous NUL character from overlay symbols   Simon Glass
• [PATCH] video: extend stdout video console work-around for 'vga'   Anatolij Gustschin
• [PATCH] libfdt: Remove superfluous NUL character from overlay symbols   Marcus Comstedt
• [PATCH] tbs2910: migrate to DM_VIDEO   Anatolij Gustschin
• [PATCH] tbs2910: migrate to DM_VIDEO   Soeren Moch
• [PATCH 01/30] net: eepro100: Remove EEPRO100_SROM_WRITE   Marek Vasut
• [PATCH 02/30] net: eepro100: Clean up comments   Marek Vasut
• [PATCH 03/30] net: eepro100: Use plain debug()   Marek Vasut
• [PATCH 04/30] net: eepro100: Fix spacing   Marek Vasut
• [PATCH 05/30] net: eepro100: Fix braces   Marek Vasut
• [PATCH 06/30] net: eepro100: Fix parenthesis alignment   Marek Vasut
• [PATCH 07/30] net: eepro100: Fix pointer location   Marek Vasut
• [PATCH 08/30] net: eepro100: Fix indented label   Marek Vasut
• [PATCH 09/30] net: eepro100: Fix remaining checkpatch issues   Marek Vasut
• [PATCH 10/30] net: eepro100: Fix camelcase   Marek Vasut
• [PATCH 11/30] net: eepro100: Use standard I/O accessors   Marek Vasut
• [PATCH 12/30] net: eepro100: Replace purge_tx_ring() with memset()   Marek Vasut
• [PATCH 13/30] net: eepro100: Factor out tx_ring command issuing   Marek Vasut
• [PATCH 14/30] net: eepro100: Add cache management   Marek Vasut
• [PATCH 15/30] net: eepro100: Remove volatile misuse   Marek Vasut
• [PATCH 16/30] net: eepro100: Reorder functions in the driver   Marek Vasut
• [PATCH 17/30] net: eepro100: Use PCI_DEVICE() to define PCI device compat list   Marek Vasut
• [PATCH 18/30] net: eepro100: Switch from malloc()+memset() to calloc()   Marek Vasut
• [PATCH 19/30] net: eepro100: Factor out MII registration   Marek Vasut
• [PATCH 20/30] net: eepro100: Fix EE_*_CMD macros   Marek Vasut
• [PATCH 21/30] net: eepro100: Drop inline keyword   Marek Vasut
• [PATCH 22/30] net: eepro100: Pass PCI BDF into bus_to_phys()/phys_to_bus()   Marek Vasut
• [PATCH 23/30] net: eepro100: Introduce device private data   Marek Vasut
• [PATCH 24/30] net: eepro100: Pass device private data around   Marek Vasut
• [PATCH 25/30] net: eepro100: Pass device private data into mdiobus   Marek Vasut
• [PATCH 26/30] net: eepro100: Add RX/TX rings into the private data   Marek Vasut
• [PATCH 27/30] net: eepro100: Drop bd_t pointer from read_hw_addr()   Marek Vasut
• [PATCH 28/30] net: eepro100: Split common parts of non-DM functions out   Marek Vasut
• [PATCH 29/30] net: eepro100: Add DM support   Marek Vasut
• [PATCH 30/30] net: eepro100: Add Kconfig entries   Marek Vasut
• [PATCH 01/30] net: eepro100: Remove EEPRO100_SROM_WRITE   Ramon Fried
• [PATCH 02/30] net: eepro100: Clean up comments   Ramon Fried
• [PATCH 05/30] net: eepro100: Fix braces   Ramon Fried
• [PATCH 03/30] net: eepro100: Use plain debug()   Ramon Fried
• [PATCH 06/30] net: eepro100: Fix parenthesis alignment   Ramon Fried
• [PATCH 07/30] net: eepro100: Fix pointer location   Ramon Fried
• [PATCH 04/30] net: eepro100: Fix spacing   Ramon Fried
• [PATCH 08/30] net: eepro100: Fix indented label   Ramon Fried
• [PATCH 09/30] net: eepro100: Fix remaining checkpatch issues   Ramon Fried
• [PATCH 10/30] net: eepro100: Fix camelcase   Ramon Fried
• [PATCH 12/30] net: eepro100: Replace purge_tx_ring() with memset()   Ramon Fried
• [PATCH 11/30] net: eepro100: Use standard I/O accessors   Ramon Fried
• [PATCH 13/30] net: eepro100: Factor out tx_ring command issuing   Ramon Fried
• [PATCH 18/30] net: eepro100: Switch from malloc()+memset() to calloc()   Ramon Fried
• [PATCH 16/30] net: eepro100: Reorder functions in the driver   Ramon Fried
• [PATCH 15/30] net: eepro100: Remove volatile misuse   Ramon Fried
• [PATCH 14/30] net: eepro100: Add cache management   Ramon Fried
• [PATCH 17/30] net: eepro100: Use PCI_DEVICE() to define PCI device compat list   Ramon Fried
• [PATCH 21/30] net: eepro100: Drop inline keyword   Ramon Fried
• [PATCH 22/30] net: eepro100: Pass PCI BDF into bus_to_phys()/phys_to_bus()   Ramon Fried
• [PATCH 19/30] net: eepro100: Factor out MII registration   Ramon Fried
• [PATCH 23/30] net: eepro100: Introduce device private data   Ramon Fried
• [PATCH 20/30] net: eepro100: Fix EE_*_CMD macros   Ramon Fried
• [PATCH 25/30] net: eepro100: Pass device private data into mdiobus   Ramon Fried
• [PATCH 26/30] net: eepro100: Add RX/TX rings into the private data   Ramon Fried
• [PATCH 27/30] net: eepro100: Drop bd_t pointer from read_hw_addr()   Ramon Fried
• [PATCH 24/30] net: eepro100: Pass device private data around   Ramon Fried
• [PATCH 28/30] net: eepro100: Split common parts of non-DM functions out   Ramon Fried
• [PATCH 29/30] net: eepro100: Add DM support   Ramon Fried
• [PATCH 30/30] net: eepro100: Add Kconfig entries   Ramon Fried
• [PATCH v4] net: tftp: Add client support for RFC 7440   Matthias Brugger
• [PATCH v4] net: tftp: Add client support for RFC 7440   Ramon Fried
• rk3399: SPI boot: Return from ROM unsuccessful (with TPL)   Suniel Mahesh
• [PATCH] arch: arm: uDPU: fix PHY mode definition to sgmii-2500   Jakov Petrina
• [PATCH 1/1] doc: dfu: describe eMMC partition number parameter   Lukasz Majewski
• [PATCH 1/1] doc: dfu: add DFU to HTML documentation   Lukasz Majewski
• [PATCH 1/1] doc: dfu: fix typos in README.dfu   Lukasz Majewski
• [PATCH 1/1] doc: dfu: describe more DFU function   Lukasz Majewski
• [PATCH 1/1] MAINTAINERS: add dfu.h and dfu.rst to DFU   Heinrich Schuchardt
• rk3399: SPI boot: Return from ROM unsuccessful (with TPL)   Hugh Cole-Baker
• [PATCH v2 0/3] add optee support for broadcom NS3 soc   Rayagonda Kokatanur
• [PATCH v2 1/3] board: ns3: add optee based bnxt fw load driver   Rayagonda Kokatanur
• [PATCH v2 2/3] configs: ns3: enable tee and optee driver   Rayagonda Kokatanur
• [PATCH v2 3/3] arm: dts: ns3: add optee node   Rayagonda Kokatanur
• [PATCH v1 1/3] drivers: pinctrl-single: handle different register width   Rayagonda Kokatanur
• Pull request: u-boot-rockchip-20200522   Kever Yang
• [PATCH v2] rockchip: Fix spl mmc boot device ofpath   Jagan Teki
• [PATCH] video: extend stdout video console work-around for 'vga'   Soeren Moch
• [PATCH 1/1] MAINTAINERS: add dfu.h and dfu.rst to DFU   Lukasz Majewski
• [PATCH] tbs2910: migrate to DM_VIDEO   Soeren Moch
• [PATCH] clk: rk3399: Fix eMMC get_clk reg offset   Jagan Teki
• [PATCH] mmc: sdhci: Fix HISPD bit handling   Jagan Teki
• [PATCH 1/3] arm64: dts: rk3399-nanopi4: Add u-boot,spl-boot-order   Jagan Teki
• [PATCH 2/3] nanopc-t4: Enable USB Gadget   Jagan Teki
• [PATCH 3/3] doc: rockchip: Document eMMC program steps   Jagan Teki
• [PATCH 0/6] checkpatch.pl: Add features to help improve U-Boot code   Tom Rini
• [PATCH v3 9/9] configs: Enable support for the XHCI controller on RPI4 board (ARM 64-bit)   Matthias Brugger
• rk3399: SPI boot: Return from ROM unsuccessful (with TPL)   Suniel Mahesh
• [PATCH] pci: Make Rockchip PCIe voltage regulators optional   Mark Kettenis
• [PATCH] rk3399: Enable NVMe distro bootcmd   Mark Kettenis
• rk3399: SPI boot: Return from ROM unsuccessful (with TPL)   Hugh Cole-Baker
• [PATCH 1/2] rockchip: Enable PCIe/M.2 and NVMe on Firefly RK3399   Mark Kettenis
• [PATCH 2/2] rockchip: Enable PCIe and NVMe on ROCKPro64   Mark Kettenis
• [PATCH v4 00/13] x86: cbfs: Various clean-ups to CBFS implementation   Simon Glass
• [PATCH v4 01/13] cbfs: Rename the result variable   Simon Glass
• [PATCH v4 02/13] cbfs: Use ulong consistently   Simon Glass
• [PATCH v4 03/13] cbfs: Use bool type for whether initialised   Simon Glass
• [PATCH v4 04/13] cbfs: Adjust return value of file_cbfs_next_file()   Simon Glass
• [PATCH v4 05/13] cbfs: Adjust file_cbfs_load_header() to use cbfs_priv   Simon Glass
• [PATCH v4 06/13] cbfs: Adjust cbfs_load_header_ptr() to use cbfs_priv   Simon Glass
• [PATCH v4 07/13] cbfs: Unify the two header loaders   Simon Glass
• [PATCH v4 08/13] cbfs: Use void * for the position pointers   Simon Glass
• [PATCH v4 09/13] cbfs: Record the start address in cbfs_priv   Simon Glass
• [PATCH v4 10/13] cbfs: Return the error code from file_cbfs_init()   Simon Glass
• [PATCH v4 11/13] cbfs: Change file_cbfs_find_uncached() to return an error   Simon Glass
• [PATCH v4 12/13] cbfs: Allow reading a file from a CBFS given its base addr   Simon Glass
• [PATCH v4 13/13] cbfs: Don't require the CBFS size with cbfs_init_mem()   Simon Glass
• [PATCH v4 03/13] cbfs: Use bool type for whether initialised   Bin Meng
• [PATCH v4 07/13] cbfs: Unify the two header loaders   Bin Meng
• [PATCH v4 11/13] cbfs: Change file_cbfs_find_uncached() to return an error   Bin Meng
• [PATCH v4 12/13] cbfs: Allow reading a file from a CBFS given its base addr   Bin Meng
• [PATCH v4 00/13] x86: cbfs: Various clean-ups to CBFS implementation   Bin Meng
• [PATCH v2 00/26] x86: video: Speed up the framebuffer   Simon Glass
• [PATCH v2 01/26] x86: fsp: Reinit the FPU after FSP meminit   Simon Glass
• [PATCH v2 02/26] console: Add a way to output to serial only   Simon Glass
• [PATCH v2 03/26] video: Show an error when a vidconsole function fails   Simon Glass
• [PATCH v2 04/26] sandbox: video: Allow selection of rotated console   Simon Glass
• [PATCH v2 05/26] video: Split out expression parts into variables   Simon Glass
• [PATCH v2 06/26] video: Adjust rotated console to start at right edge   Simon Glass
• [PATCH v2 07/26] video: Drop unnecessary #ifdef around vid_console_color()   Simon Glass
• [PATCH v2 08/26] video: Add a comment for struct video_uc_platdata   Simon Glass
• [PATCH v2 09/26] video: Add support for copying to a hardware framebuffer   Simon Glass
• [PATCH v2 10/26] video: Set up the copy framebuffer when enabled   Simon Glass
• [PATCH v2 11/26] video: Clear the copy framebuffer when clearing the screen   Simon Glass
• [PATCH v2 12/26] video: Add helpers for vidconsole for the copy framebuffer   Simon Glass
• [PATCH v2 13/26] video: Update normal console to support copy buffer   Simon Glass
• [PATCH v2 14/26] video: Update truetype console to support copy buffer   Simon Glass
• [PATCH v2 15/26] video: Update rotated console to support copy buffer   Simon Glass
• [PATCH v2 16/26] video: Update the copy framebuffer when writing bitmaps   Simon Glass
• [PATCH v2 17/26] video: Add comments to struct sandbox_sdl_plat   Simon Glass
• [PATCH v2 18/26] video: sandbox: Add support for the copy framebuffer   Simon Glass
• [PATCH v2 19/26] video: pci: Set up the copy framebuffer   Simon Glass
• [PATCH v2 20/26] x86: fsp: video: Allocate a frame buffer when needed   Simon Glass
• [PATCH v2 21/26] video: Correctly handle multiple framebuffers   Simon Glass
• [PATCH v2 22/26] x86: video: Support copy framebuffer with probed devices   Simon Glass
• [PATCH v2 23/26] chromebook_samus: Enable the copy framebuffer   Simon Glass
• [PATCH v2 24/26] chromebook_link: Enable the copy framebuffer   Simon Glass
• [PATCH v2 25/26] minnowmax: Enable the copy framebuffer   Simon Glass
• [PATCH v2 26/26] x86: minnowmax: Drop screen resolution to 1024x768   Simon Glass
• [PATCH v3 12/26] video: Add helpers for vidconsole for the copy framebuffer   Simon Glass
• [PATCH v2 0/9] riscv: sifive/fu540: Booting from SPI   Bin Meng
• [PATCH 1/2] rockchip: Enable PCIe/M.2 and NVMe on Firefly RK3399   Simon Glass
• [PATCH] video: extend stdout video console work-around for 'vga'   Simon Glass
• [PATCH v1 01/15] configs: ns3: enable pinctrl driver   Simon Glass
• [PATCH v1 02/15] dt-bindings: pinctrl: add ns3 pads definition   Simon Glass
• [PATCH v1 03/15] arm: dts: ns3: add pinctrl node   Simon Glass
• [PATCH v1 04/15] arm: dts: ns3: add gpio node   Simon Glass
• [PATCH v1 05/15] configs: ns3: enable BCM IPROC mmc driver   Simon Glass
• [PATCH v1 06/15] arm: dts: ns3: add emmc node   Simon Glass
• [PATCH v1 07/15] configs: ns3: enable mmc commands   Simon Glass
• [PATCH v1 08/15] arm: dts: ns3: add qspi node   Simon Glass
• [PATCH v1 09/15] arm: dts: ns3: add i2c node   Simon Glass
• [PATCH v1 10/15] arm: dts: ns3: add PAXB PCIe host and phy node   Simon Glass
• [PATCH v1 11/15] configs: ns3: enable gpt commands   Simon Glass
• [PATCH v1 12/15] configs: ns3: enable EXT4 and FAT fs support   Simon Glass
• [PATCH v1 13/15] configs: ns3: enable sp805 watchdog driver   Simon Glass
• [PATCH v1 14/15] arm: dts: ns3: add sp805 watchdog node   Simon Glass
• [PATCH v1 15/15] board: ns3: start sp805 watchdog service   Simon Glass
• [PATCH v2 3/3] arm: dts: ns3: add optee node   Simon Glass
• [PATCH] libfdt: Remove superfluous NUL character from overlay symbols   Simon Glass
• [PATCH v1 1/3] drivers: pinctrl-single: handle different register width   Simon Glass
• [PATCH v2 1/3] board: ns3: add optee based bnxt fw load driver   Simon Glass
• [PATCH v2 2/3] configs: ns3: enable tee and optee driver   Simon Glass
• [PATCH v2 0/9] riscv: sifive/fu540: Booting from SPI   Bin Meng
• [PATCH] x86: chromebook_coral: Fix a build error   Simon Glass
• [PATCH] x86: chromebook_coral: Fix a build error   Bin Meng
• [PATCH] clk: rk3399: Fix eMMC get_clk reg offset   Kever Yang
• [PATCH v2] rockchip: Fix spl mmc boot device ofpath   Kever Yang
• [PATCH 1/3] arm64: dts: rk3399-nanopi4: Add u-boot, spl-boot-order   Kever Yang
• [PATCH 2/3] nanopc-t4: Enable USB Gadget   Kever Yang
• [PATCH 3/3] doc: rockchip: Document eMMC program steps   Kever Yang
• [PATCH] rk3399: Enable NVMe distro bootcmd   Kever Yang
• [PATCH 1/2] rockchip: Enable PCIe/M.2 and NVMe on Firefly RK3399   Kever Yang
• [PATCH] pci: Make Rockchip PCIe voltage regulators optional   Kever Yang
• [PATCH] rockchip: enable RNG on RockPro64   Kever Yang
• Re: [PATCH 4/7] rockchip: Remove ARCH= references from documentation【请注意，邮件由tom.rini at gmail.com代发】   Kever Yang
• [PATCH u-boot 1/2] eth/r8152: fix assigning the wrong endpoint   Hayes Wang
• [PATCH U-BOOT v2 00/30] fs: btrfs: Re-implement btrfs support using the more widely used extent buffer base code   Qu Wenruo
• [PATCH U-BOOT v2 01/30] fs: btrfs: Sync btrfs_btree.h from kernel   Qu Wenruo
• [PATCH U-BOOT v2 02/30] fs: btrfs: Add More checksum algorithm support to btrfs   Qu Wenruo
• [PATCH U-BOOT v2 03/30] fs: btrfs: Cross-port btrfs_read_dev_super() from btrfs-progs   Qu Wenruo
• [PATCH U-BOOT v2 04/30] fs: btrfs: Cross-port rbtree-utils from btrfs-progs   Qu Wenruo
• [PATCH U-BOOT v2 05/30] fs: btrfs: Cross-port extent-cache.[ch] from btrfs-progs   Qu Wenruo
• [PATCH U-BOOT v2 06/30] fs: btrfs: Cross-port extent-io.[ch] from btrfs-progs   Qu Wenruo
• [PATCH U-BOOT v2 07/30] fs: btrfs: Cross port structure accessor into ctree.h   Qu Wenruo
• [PATCH U-BOOT v2 08/30] fs: btrfs: Cross port volumes.[ch] from btrfs-progs   Qu Wenruo
• [PATCH U-BOOT v2 09/30] fs: btrfs: Crossport read_tree_block() from btrfs-progs   Qu Wenruo
• [PATCH U-BOOT v2 10/30] fs: btrfs: Rename struct btrfs_path to struct __btrfs_path   Qu Wenruo
• [PATCH U-BOOT v2 11/30] fs: btrfs: Rename btrfs_root to __btrfs_root   Qu Wenruo
• [PATCH U-BOOT v2 12/30] fs: btrfs: Cross port struct btrfs_root to ctree.h   Qu Wenruo
• [PATCH U-BOOT v2 13/30] fs: btrfs: Crossport btrfs_search_slot() from btrfs-progs   Qu Wenruo
• [PATCH U-BOOT v2 14/30] fs: btrfs: Crossport btrfs_read_sys_array() and btrfs_read_chunk_tree()   Qu Wenruo
• [PATCH U-BOOT v2 15/30] fs: btrfs: Crossport open_ctree_fs_info()   Qu Wenruo
• [PATCH U-BOOT v2 16/30] fs: btrfs: Rename path resolve related functions to avoid name conflicts   Qu Wenruo
• [PATCH U-BOOT v2 17/30] fs: btrfs: Use btrfs_readlink() to implement __btrfs_readlink()   Qu Wenruo
• [PATCH U-BOOT v2 18/30] fs: btrfs: inode: Allow next_length() to return value > BTRFS_NAME_LEN   Qu Wenruo
• [PATCH U-BOOT v2 19/30] fs: btrfs: Implement btrfs_lookup_path()   Qu Wenruo
• [PATCH U-BOOT v2 20/30] fs: btrfs: Use btrfs_iter_dir() to replace btrfs_readdir()   Qu Wenruo
• [PATCH U-BOOT v2 21/30] fs: btrfs: Use btrfs_lookup_path() to implement btrfs_exists() and btrfs_size()   Qu Wenruo
• [PATCH U-BOOT v2 22/30] fs: btrfs: Rename btrfs_file_read() and its callees to avoid name conflicts   Qu Wenruo
• [PATCH U-BOOT v2 23/30] fs: btrfs: Introduce btrfs_read_extent_inline() and btrfs_read_extent_reg()   Qu Wenruo
• [PATCH U-BOOT v2 24/30] fs: btrfs: Introduce lookup_data_extent() for later use   Qu Wenruo
• [PATCH U-BOOT v2 25/30] fs: btrfs: Implement btrfs_file_read()   Qu Wenruo
• [PATCH U-BOOT v2 26/30] fs: btrfs: Introduce function to reolve path in one subvolume   Qu Wenruo
• [PATCH U-BOOT v2 27/30] fs: btrfs: Introduce function to resolve the path of one subvolume   Qu Wenruo
• [PATCH U-BOOT v2 28/30] fs: btrfs: Imeplement btrfs_list_subvols() using new infrastructure   Qu Wenruo
• [PATCH U-BOOT v2 29/30] fs: btrfs: Cleanup the old implementation   Qu Wenruo
• [PATCH U-BOOT v2 30/30] MAINTAINERS: Add btrfs mail list   Qu Wenruo
• [PATCH v12 00/18] RISC-V SiFive FU540 support SPL   Pragnesh Patel
• [PATCH v12 01/18] misc: add driver for the SiFive otp controller   Pragnesh Patel
• [PATCH v12 02/18] riscv: sifive: fu540: Use OTP DM driver for serial environment variable   Pragnesh Patel
• [PATCH v12 03/18] riscv: Add _image_binary_end for SPL   Pragnesh Patel
• [PATCH v12 04/18] lib: Makefile: build crc7.c when CONFIG_MMC_SPI   Pragnesh Patel
• [PATCH v12 05/18] riscv: sifive: dts: fu540: Add board -u-boot.dtsi files   Pragnesh Patel
• [PATCH v12 06/18] sifive: fu540: add ddr driver   Pragnesh Patel
• [PATCH v12 07/18] sifive: dts: fu540: Add DDR controller and phy register settings   Pragnesh Patel
• [PATCH v12 08/18] riscv: sifive: dts: fu540: add U-Boot dmc node   Pragnesh Patel
• [PATCH v12 09/18] clk: sifive: fu540-prci: Add clock enable and disable ops   Pragnesh Patel
• [PATCH v12 10/18] clk: sifive: fu540-prci: Add ddr clock initialization   Pragnesh Patel
• [PATCH v12 11/18] clk: sifive: fu540-prci: Release ethernet clock reset   Pragnesh Patel
• [PATCH v12 12/18] riscv: dts: sifive: Sync hifive-unleashed-a00 dts from linux   Pragnesh Patel
• [PATCH v12 13/18] riscv: cpu: fu540: Add support for cpu fu540   Pragnesh Patel
• [PATCH v12 14/18] riscv: sifive: fu540: add SPL configuration   Pragnesh Patel
• [PATCH v12 15/18] sifive: fu540: Add sample SD gpt partition layout   Pragnesh Patel
• [PATCH v12 16/18] sifive: fu540: Add U-Boot proper sector start   Pragnesh Patel
• [PATCH v12 17/18] configs: fu540: Add config options for U-Boot SPL   Pragnesh Patel
• [PATCH v12 18/18] doc: sifive: fu540: Add description for OpenSBI generic platform   Pragnesh Patel
• Regression when building with DEVICE_TREE parameter   Patrice CHOTARD
• [PATCH u-boot v2 0/2] eth/r8152: minor corrections   Hayes Wang
• [PATCH u-boot v2 1/2] eth/r8152: fix assigning the wrong endpoint   Hayes Wang
• [PATCH u-boot v2 2/2] eth/r8152: fix typo in register name   Hayes Wang
• rk3399: SPI boot: Return from ROM unsuccessful (with TPL)   Jagan Teki
• [U-Boot] Pull request: u-boot-riscv/master   uboot at andestech.com
• [PATCH] sf: Drop spl_flash_get_sw_write_prot   Jagan Teki
• [PATCH 2/2] sf: Simplify probe for dm code   Jagan Teki
• [PATCH v2 1/9] spl: Try to get SPL boot device via board_get_int   Jagan Teki
• [U-Boot] is it mandatory for SPL to support DM   Jagan Teki
• [PATCH 1/2] spi: Zap sh_spi driver   Jagan Teki
• [PATCH] rockchip: enable RNG on RockPro64   Marcin Juszkiewicz
• [PATCH v2 1/2] rockchip: Enable PCIe/M.2 and NVMe on Firefly RK3399   Mark Kettenis
• [PATCH v2 2/2] rockchip: Enable PCIe and NVMe on ROCKPro64   Mark Kettenis
• [PATCH v4 00/13] x86: cbfs: Various clean-ups to CBFS implementation   Bin Meng
• [PATCH v5 00/16] Add Rockchip RK3399 USB3.0 Host support   Marcin Juszkiewicz
• [PATCH] pci: Make Rockchip PCIe voltage regulators optional   Marcin Juszkiewicz
• [PATCH v5 00/16] Add Rockchip RK3399 USB3.0 Host support   Jagan Teki
• [PATCH v3 9/9] configs: Enable support for the XHCI controller on RPI4 board (ARM 64-bit)   Sylwester Nawrocki
• [PATCH v5 00/16] Add Rockchip RK3399 USB3.0 Host support   Marcin Juszkiewicz
• [PATCH v5 00/16] Add Rockchip RK3399 USB3.0 Host support   Jagan Teki
• [PATCH v5 00/16] Add Rockchip RK3399 USB3.0 Host support   Marcin Juszkiewicz
• [PATCH v2 0/9] stm32mp1: use OPP information for PLL1 settings in SPL   Patrick Delaunay
• [PATCH v2 1/9] arm: stm32mp: spl: add bsec driver in SPL   Patrick Delaunay
• [PATCH v2 2/9] ARM: dts: stm32: add cpufreq support on stm32mp15x   Patrick Delaunay
• [PATCH v2 3/9] board: st: create common file stpmic1.c   Patrick Delaunay
• [PATCH v2 4/9] stm32mp1: clk: configure pll1 with OPP   Patrick Delaunay
• [PATCH v2 5/9] arm: stm32mp: add weak function to save vddcore   Patrick Delaunay
• [PATCH v2 6/9] board: st: stpmic1: add function stpmic1_init   Patrick Delaunay
• [PATCH v2 7/9] board: stm32mp1: update vddcore in SPL   Patrick Delaunay
• [PATCH v2 8/9] ARM: dts: stm32mp1: use OPP information for PLL1 settings in SPL   Patrick Delaunay
• [PATCH v2 9/9] board: stm32mp1: move the function board_debug_uart_init in spl.c   Patrick Delaunay
• [PATCH 0/2] mtd: spi-nand: Update Toshiba support   Robert Marko
• [U-Boot] is it mandatory for SPL to support DM   Marek Vasut
• [PATCH 1/2] spi: Zap sh_spi driver   Marek Vasut
• [RFC PATCH v3 3/3] rpi4: add a mapping for the PCIe XHCI controller MMIO registers (ARM 32bit)   Marek Szyprowski
• 8e35bb07eb mkimage: Support automatic creating of a FIT without a .its   Wolfgang Denk
• [PATCH v4 0/9] USB host support for Raspberry Pi 4 board (64-bit)   Sylwester Nawrocki
• [PATCH v4 1/9] usb: xhci: Add missing cache flush in the scratchpad array initialization   Sylwester Nawrocki
• [PATCH v4 2/9] usb: xhci: Use only 32-bit accesses in xhci_writeq/xhci_readq   Sylwester Nawrocki
• [PATCH v4 3/9] pci: Move some PCIe register offset definitions to a common header   Sylwester Nawrocki
• [PATCH v4 4/9] rpi4: shorten a mapping for the DRAM   Sylwester Nawrocki
• [PATCH v4 5/9] rpi4: add a mapping for the PCIe XHCI controller MMIO registers (ARM 64bit)   Sylwester Nawrocki
• [PATCH v4 6/9] linux/bitfield.h: Add primitives for manipulating bitfields both in host- and fixed-endian   Sylwester Nawrocki
• [PATCH v4 7/9] pci: Add some PCI Express capability register offset definitions   Sylwester Nawrocki
• [PATCH v4 8/9] pci: Add driver for Broadcom BCM2711 SoC PCIe controller   Sylwester Nawrocki
• [PATCH v4 9/9] configs: Enable support for the XHCI controller on RPI4 board (ARM 64-bit)   Sylwester Nawrocki
• [PATCH u-boot v2 1/2] eth/r8152: fix assigning the wrong endpoint   Marek Vasut
• [PATCH] mmc: davinci_mmc: Cleanup to use dt in U-boot and static platdata in SPL   Bartosz Golaszewski
• [PATCH] video: ipuv3: remove some useless code to reduce binary size   Anatolij Gustschin
• [PATCH u-boot v2 1/2] eth/r8152: fix assigning the wrong endpoint   Hayes Wang
• [PATCH u-boot v2 1/2] eth/r8152: fix assigning the wrong endpoint   Marek Vasut
• [PATCH v12 00/18] RISC-V SiFive FU540 support SPL   Bin Meng
• [PATCH v2 1/9] spl: Try to get SPL boot device via board_get_int   Tom Rini
• [PATCH 1/2] ks2_evm: Switch to DM_SPL, SPL_OF_CONTROL   Jagan Teki
• [PATCH 2/2] spi: davinci: Drop non-dm code   Jagan Teki
• [PATCH v12 00/18] RISC-V SiFive FU540 support SPL   Pragnesh Patel
• [PATCH] rockchip: enable USB OHCI host for RockPro64   Marcin Juszkiewicz
• [PATCH] mmc: davinci_mmc: Cleanup to use dt in U-boot and static platdata in SPL   Simon Glass
• [PATCH v4 2/9] usb: xhci: Use only 32-bit accesses in xhci_writeq/xhci_readq   Simon Glass
• [RFC PATCH v3 3/3] rpi4: add a mapping for the PCIe XHCI controller MMIO registers (ARM 32bit)   Simon Glass
• [PATCH] mmc: davinci_mmc: Cleanup to use dt in U-boot and static platdata in SPL   Faiz Abbas
• [PATCH] RFC: tiny-dm: Proposal for using driver model in SPL   Simon Glass
• [U-Boot] is it mandatory for SPL to support DM   Simon Glass
• [PATCH] mmc: davinci_mmc: Cleanup to use dt in U-boot and static platdata in SPL   Simon Glass
• [U-Boot] Pull request: u-boot-riscv/master   Tom Rini
• [U-Boot] is it mandatory for SPL to support DM   Marek Vasut
• [U-Boot] is it mandatory for SPL to support DM   Simon Glass
• [PATCH v2] x86: chromebook_coral: Fix a build error   Simon Glass
• [U-Boot] is it mandatory for SPL to support DM   Marek Vasut
• [PATCH] video: ipuv3: remove some useless code to reduce binary size   Tom Rini
• [PATCH v4 2/9] usb: xhci: Use only 32-bit accesses in xhci_writeq/xhci_readq   Sylwester Nawrocki
• [U-Boot] is it mandatory for SPL to support DM   Simon Glass
• [PATCH v1 1/3] configs: ns3: enable FIT config   Simon Glass
• [PATCH v1 3/3] board: ns3: add development keys used in FIT   Simon Glass
• [PATCH v1 2/3] configs: ns3: enable tee and optee driver   Simon Glass
• [PATCH v1 3/3] arm: dts: ns3: add optee node   Simon Glass
• [PATCH v1 1/3] common: ns3: add error logging support   Simon Glass
• [PATCH v1 2/3] board: ns3: kconfig: extend board kconfig with specific commands   Simon Glass
• [PATCH v1 3/3] cmd: bcm: add broadcom error log setup command   Simon Glass
• [PATCH v1 1/3] cmd: bcm: add nitro boot command   Simon Glass
• [PATCH v1 2/3] cmd: bcm: add nitro image load commands   Simon Glass
• [PATCH v1 3/3] cmd: bcm: add command for chimp hand shake   Simon Glass
• [PATCH v1] gpio: octeon_gpio: Add GPIO controller driver for Octeon   Simon Glass
• [RFC PATCH] mtd: spi: Drop redundent SPI flash driver   Simon Glass
• [PATCH v4 2/9] usb: xhci: Use only 32-bit accesses in xhci_writeq/xhci_readq   Simon Glass
• [GIT PULL] TI changes for v2020.07-rc3   Lokesh Vutla
• [PATCH v5 6/8] lib: rsa: add documentation to padding_pss_verify to document limitations   Heiko Stübner
• [PATCH v5 5/8] lib: rsa: free local arrays after use in rsa_gen_key_prop()   Heiko Stübner
• [PATCH v5 3/8] lib: rsa: bring exp_len in line when generating a key_prop   Heiko Stübner
• [PATCH v5 4/8] lib: rsa: fix allocated size for rr and rrtmp in rsa_gen_key_prop()   Heiko Stübner
• [PATCH v5 2/8] lib: rsa: take spl/non-spl into account when building rsa_verify_with_pkey()   Heiko Stübner
• [U-Boot] is it mandatory for SPL to support DM   Jagan Teki
• [RFC PATCH] mtd: spi: Drop redundent SPI flash driver   Jagan Teki
• [U-Boot] is it mandatory for SPL to support DM   Tom Rini
• [PATCH v4 2/9] usb: xhci: Use only 32-bit accesses in xhci_writeq/xhci_readq   Sylwester Nawrocki
• [PATCH v2 1/2] rockchip: spl: do full dram_init instead of only probing   Heiko Stuebner
• [PATCH v2 2/2] spl: add fixed memory node in target fdt also when loading ATF   Heiko Stuebner
• [PATCH] armv8: cache_v8: fix mmu_set_region_dcache_behaviour   Tom Rini
• [PATCH] phy: Fix possible NULL pointer deference   Tom Rini
• [PATCH 1/1] MAINTAINERS: add doc/driver-model/ to DRIVER MODEL   Tom Rini
• [PATCH] Convert CONFIG_CMD_MMC to Kconfig   Tom Rini
• [PATCH] tools/env/fw_env.h: remove env.h   Tom Rini
• [PATCH] env: Convert ENV_ACCESS_IGNORE_FORCE to Kconfig   Tom Rini
• [PATCH 1/4] cmd: unzip: automatically select CONFIG_GZIP   Tom Rini
• [PATCH 2/4] cmd: zip: automatically pull in gzip()   Tom Rini
• [PATCH 3/4] cmd: zip: fix implicit declaration warning   Tom Rini
• [PATCH 4/4] sandbox: move compression option to Kconfig   Tom Rini
• [PATCH 1/1] doc: dfu: describe eMMC partition number parameter   Tom Rini
• [PATCH 1/1] doc: dfu: add DFU to HTML documentation   Tom Rini
• [PATCH 1/1] doc: dfu: fix typos in README.dfu   Tom Rini
• [PATCH 1/1] doc: dfu: describe more DFU function   Tom Rini
• [PATCH 1/1] MAINTAINERS: add dfu.h and dfu.rst to DFU   Tom Rini
• [U-Boot] is it mandatory for SPL to support DM   Marek Vasut
• [U-Boot] is it mandatory for SPL to support DM   Marek Vasut
• [U-Boot] is it mandatory for SPL to support DM   Tom Rini
• [PATCH] video: make vidconsole commands optional   Anatolij Gustschin
• [PATCH] RFC: tiny-dm: Proposal for using driver model in SPL   Tom Rini
• [U-Boot] is it mandatory for SPL to support DM   Marek Vasut
• [U-Boot] is it mandatory for SPL to support DM   Tom Rini
• [U-Boot] is it mandatory for SPL to support DM   Marek Vasut
• [U-Boot] is it mandatory for SPL to support DM   Tom Rini
• [PATCH 1/4] x86: coral: Correct some FSP-M settings   Simon Glass
• [PATCH 2/4] x86: apl: Add hex offsets for registers in FSP-M   Simon Glass
• [PATCH 3/4] x86: coral: Correct some FSP-S settings   Simon Glass
• [PATCH 4/4] x86: apl: Add hex offsets for registers in FSP-S   Simon Glass
• [RFC PATCH] imx: skip unused compatible strings in drivers   Anatolij Gustschin
• [PATCH] RFC: tiny-dm: Proposal for using driver model in SPL   Simon Glass
• [PATCH v5 4/8] lib: rsa: fix allocated size for rr and rrtmp in rsa_gen_key_prop()   Philipp Tomsich
• altera intel cyclone v / error: enabling full line of zeros but not enabled in Cortex-A9   Nico Becker
• [PATCH v2 2/2] spl: add fixed memory node in target fdt also when loading ATF   Philipp Tomsich
• [PATCH] RFC: tiny-dm: Proposal for using driver model in SPL   Tom Rini
• [PATCH] video: make vidconsole commands optional   Simon Glass
• [PATCH] RFC: tiny-dm: Proposal for using driver model in SPL   Simon Glass
• [PATCH v4 2/9] usb: xhci: Use only 32-bit accesses in xhci_writeq/xhci_readq   Simon Glass
• [PATCH v12 01/18] misc: add driver for the SiFive otp controller   Simon Glass
• [PATCH] video: make vidconsole commands optional   Anatolij Gustschin
• [PATCH 2/2] sf: Simplify probe for dm code   Simon Glass
• [PATCH] video: make vidconsole commands optional   Simon Glass
• [PATCH] video: ipuv3: fix building with disabled panel driver   Anatolij Gustschin
• [PATCH] video: make backlight and panel drivers optional   Anatolij Gustschin
• [PATCH 1/8] imx: convert embest boards to DM_VIDEO   Anatolij Gustschin
• [PATCH 2/8] imx: convert pico-imx6 to DM_VIDEO   Anatolij Gustschin
• [PATCH 2/2] sf: Simplify probe for dm code   Tom Rini
• [PATCH 3/8] imx: convert dms-ba16 boards to DM_VIDEO   Anatolij Gustschin
• [PATCH 4/8] imx: convert cgtqmx6eval board to DM_VIDEO   Anatolij Gustschin
• [PATCH 5/8] imx: convert mx6cuboxi board to DM_VIDEO   Anatolij Gustschin
• [PATCH 6/8] imx: convert gwventana board to DM_VIDEO   Anatolij Gustschin
• [PATCH 7/8] imx: convert mx51evk board to DM_VIDEO   Anatolij Gustschin
• [PATCH 8/8] imx: convert mx53loco board to DM_VIDEO   Anatolij Gustschin
• [GIT PULL] TI changes for v2020.07-rc3   Tom Rini
• [ANN] U-Boot v2020.07-rc3 released   Tom Rini
• [PATCH] armv8: cache_v8: fix mmu_set_region_dcache_behaviour   Peng Fan
• [PATCH u-boot v2 1/2] eth/r8152: fix assigning the wrong endpoint   Hayes Wang
• [PATCH 1/5] ARM: stm32: Re-enable KS8851 on DHCOM   Marek Vasut
• [PATCH 2/5] ARM: stm32: Hog GPIO PF7 high on DHCOR to unlock SPI NOR nWP   Marek Vasut
• [PATCH 3/5] ARM: dts: stm32: Add alternate pinmux for I2C2 pins   Marek Vasut
• [PATCH 4/5] ARM: dts: stm32: Repair I2C2 operation on AV96   Marek Vasut
• [PATCH 5/5] ARM: dts: stm32: Disable SDR104 mode on AV96   Marek Vasut
• [PATCH 8/8] imx: convert mx53loco board to DM_VIDEO   Jason Liu
• [PATCH v6 00/16] Add Rockchip RK3399 USB3.0 Host support   Frank Wang
• [PATCH v6 01/16] clk: rk3399: Enable/Disable the USB2PHY clk   Frank Wang
• [PATCH v6 02/16] clk: rk3399: Set empty for TCPHY assigned-clocks   Frank Wang
• [PATCH v6 03/16] clk: rk3399: Enable/Disable TCPHY clocks   Frank Wang
• [PATCH v6 04/16] arm: mach-rockchip: bind sub-nodes for rk3399_syscon   Frank Wang
• [PATCH v6 05/16] phy: rockchip: Add Rockchip USB2PHY driver   Frank Wang
• [PATCH v6 06/16] phy: rockchip: Add Rockchip USB TypeC PHY driver   Frank Wang
• [PATCH v6 07/16] usb: dwc3: add dis_enblslpm_quirk   Frank Wang
• [PATCH v6 08/16] usb: dwc3: add dis_u2_freeclk_exists_quirk   Frank Wang
• [PATCH v6 09/16] usb: dwc3: Add disable u2mac linestate check quirk   Frank Wang
• [PATCH v6 10/16] usb: dwc3: Enable AutoRetry feature in the controller   Frank Wang
• [PATCH v6 11/16] usb: dwc3: amend UTMI/UTMIW phy interface setup   Frank Wang
• [PATCH v6 12/16] usb: dwc3: add make compatible for rockchip platform   Frank Wang
• [PATCH v6 13/16] driver: usb: drop legacy rockchip xhci driver   Frank Wang
• [PATCH v6 14/16] ARM: dts: rk3399-evb: usb3.0 host support   Frank Wang
• [PATCH v6 15/16] configs: evb-rk3399: update support usb3.0 host   Frank Wang
• [PATCH v6 16/16] roc-rk3399-pc: Enable USB3.0 Host   Frank Wang
• [PATCH v5 05/16] arm64: dts: rk3399: Move u2phy into root port   Frank Wang
• [PATCH v6 12/16] usb: dwc3: add make compatible for rockchip platform   Jagan Teki
• [PATCH v6 04/16] arm: mach-rockchip: bind sub-nodes for rk3399_syscon   Jagan Teki
• [PATCH v6 00/16] Add Rockchip RK3399 USB3.0 Host support   Jagan Teki
• [PATCH v5 00/16] Add Rockchip RK3399 USB3.0 Host support   Jagan Teki
• [PATCH v12 01/18] misc: add driver for the SiFive otp controller   Pragnesh Patel
• [PATCH v1] i2c: octeon_i2c: Add I2C controller driver for Octeon   Stefan Roese
• [PATCH v2] x86: chromebook_coral: Fix a build error   Bin Meng
• [U-Boot] Pull request: u-boot-riscv/master   Rick Chen
• [PATCH v4 2/9] usb: xhci: Use only 32-bit accesses in xhci_writeq/xhci_readq   Marek Szyprowski
• [PATCH v3 0/3] cmd: add driver, fs and part type listing commands   Wolfgang Denk
• [PATCH 0/9] spi: dm-convert and cleanups   Jagan Teki
• [PATCH 1/9] spi Drop spi_init()   Jagan Teki
• [PATCH 2/9] spi: Kconfig: Drop redundant CF_SPI definition   Jagan Teki
• [PATCH 3/9] spi: Kconfig: Move MSCC_BB_SPI, FSL_QSPI into DM_SPI   Jagan Teki
• [PATCH 4/9] ks2_evm: Switch to DM_SPL, SPL_OF_CONTROL   Jagan Teki
• [PATCH 5/9] spi: davinci: Drop non-dm code   Jagan Teki
• [PATCH 6/9] spi: mxs: Drop nondm code   Jagan Teki
• [PATCH 7/9] spi: mxs: Code cleanup   Jagan Teki
• [PATCH 8/9] spi: Zap SOFT_SPI (non-dm)   Jagan Teki
• [PATCH 9/9] doc: driver-model: Update SPI migration status   Jagan Teki
• [PATCH v12 00/18] RISC-V SiFive FU540 support SPL   Jagan Teki
• [PATCH v4 2/9] usb: xhci: Use only 32-bit accesses in xhci_writeq/xhci_readq   Bin Meng
• [PATCH v12 00/18] RISC-V SiFive FU540 support SPL   Bin Meng
• [PATCH v12 00/18] RISC-V SiFive FU540 support SPL   Jagan Teki
• [PATCH 1/4] x86: coral: Correct some FSP-M settings   Bin Meng
• [PATCH 2/4] x86: apl: Add hex offsets for registers in FSP-M   Bin Meng
• [PATCH 3/4] x86: coral: Correct some FSP-S settings   Bin Meng
• [PATCH 4/4] x86: apl: Add hex offsets for registers in FSP-S   Bin Meng
• [PATCH] board: xilinx/zynqmp: Remove 1-second delay at boot   Mike Looijmans
• Warnings on Edison   Bin Meng
• [U-Boot] Pull request: u-boot-riscv/master   uboot at andestech.com
• [PATCH 1/2] riscv: Avoid the reserved memory fixup if src and dst point to the same place   Bin Meng
• [PATCH v12 00/18] RISC-V SiFive FU540 support SPL   Jagan Teki
• [PATCH v6 00/16] Add Rockchip RK3399 USB3.0 Host support   Marcin Juszkiewicz
• [PATCH v3] Nokia RX-51: Add automated test for running RX-51 build in qemu   Pali Rohár
• [PATCH v3] Nokia RX-51: Add automated test for running RX-51 build in qemu   Lokesh Vutla
• [PATCH v3] Nokia RX-51: Add automated test for running RX-51 build in qemu   Pali Rohár
• [PATCH v3] Nokia RX-51: Add automated test for running RX-51 build in qemu   Lokesh Vutla
• [PATCH] doc: log: correct option name CONFIG_LOG_MAX_LEVEL   Patrick Delaunay
• [PATCH] apalis_imx6: fix video stdout in default environment   Anatolij Gustschin
• [PATCH] cm_fx6: fix video stdout in default environment   Anatolij Gustschin
• [PATCH] colibri_imx6: fix video stdout in default environment   Anatolij Gustschin
• [PATCH] nitrogen6x: update video console name   Anatolij Gustschin
• [PATCH] video: ipuv3: remove non-DM code   Anatolij Gustschin
• [PATCH 2/3] x86: spi: Rewrite logic for obtaining the SPI memory map   Bin Meng
• [PATCH v1 03/15] arm: dts: ns3: add pinctrl node   Rayagonda Kokatanur
• [ANN] U-Boot v2020.07-rc3 released   Peter Robinson
• [PATCH v3 0/5] rockchip: make it possible to sign the u-boot.itb   Heiko Stuebner
• [PATCH v3 1/5] imx: mkimage_fit_atf: Fix FIT image if BL31.bin missing   Heiko Stuebner
• [PATCH v3 2/5] mkimage: fit_image: handle multiple errors when writing signatures   Heiko Stuebner
• [PATCH v3 3/5] spl: fit: enable signing a generated u-boot.itb   Heiko Stuebner
• [PATCH v3 4/5] spl: fit: add Kconfig option to specify key-hint for fit_generator   Heiko Stuebner
• [PATCH v3 5/5] rockchip: make_fit_atf: add signature handling   Heiko Stuebner
• [PATCH v1] i2c: octeon_i2c: Add I2C controller driver for Octeon   Stefan Roese
• [PATCH v1] gpio: octeon_gpio: Add GPIO controller driver for Octeon   Stefan Roese
• [PATCH v4 2/9] usb: xhci: Use only 32-bit accesses in xhci_writeq/xhci_readq   Sylwester Nawrocki
• [RFC PATCH] imx: skip unused compatible strings in drivers   Soeren Moch
• [ANN] U-Boot v2020.07-rc3 released   Wolfgang Denk
• [RFC PATCH] imx: skip unused compatible strings in drivers   Marek Vasut
• [RFC PATCH] imx: skip unused compatible strings in drivers   Soeren Moch
• [RFC PATCH] imx: skip unused compatible strings in drivers   Anatolij Gustschin
• [RFC PATCH] imx: skip unused compatible strings in drivers   Anatolij Gustschin
• [RFC PATCH] imx: skip unused compatible strings in drivers   Marek Vasut
• [PATCH] regmap: Check for out-of-range offsets before mapping them   Pratyush Yadav
• [PATCH v2] i2c: octeon_i2c: Add I2C controller driver for Octeon   Stefan Roese
• [PATCH v2] gpio: octeon_gpio: Add GPIO controller driver for Octeon   Stefan Roese
• [PATCH v2 00/12] mips: Add initial Octeon MIPS64 base support   Stefan Roese
• [PATCH 2/2] sf: Simplify probe for dm code   Jagan Teki
• [U-Boot] is it mandatory for SPL to support DM   Simon Glass
• [ANN] U-Boot v2020.07-rc3 released   Tom Rini
• [PATCH] video: make backlight and panel drivers optional   Simon Glass
• [PATCH v1 03/15] arm: dts: ns3: add pinctrl node   Simon Glass
• [PATCH 2/2] sf: Simplify probe for dm code   Jagan Teki
• [RFC PATCH] imx: skip unused compatible strings in drivers   Peng Fan
• [RFC PATCH] imx: skip unused compatible strings in drivers   Marek Vasut
• [PATCH v3 1/5] imx: mkimage_fit_atf: Fix FIT image if BL31.bin missing   Peng Fan
• [RFC PATCH] imx: skip unused compatible strings in drivers   Anatolij Gustschin
• [ANN] U-Boot v2020.07-rc3 released   Alexey Brodkin
• u-boot Marvell ethernet switch development   Rob Nino
• [ANN] U-Boot v2020.07-rc3 released   Tom Rini
• [PATCH] doc: log: correct option name CONFIG_LOG_MAX_LEVEL   Heinrich Schuchardt
• [PATCH] arch: arm: uDPU: fix PHY mode definition to sgmii-2500   Stefan Roese
• [PATCH v2] arm: dts: uDPU: switch default PHY speed to 3.125Gbit   Stefan Roese
• [PATCH v2] arm: mvebu: Convert CRS305-1G-4S board to CRS3xx-98DX3236   Stefan Roese
• patman: ImportError   Stefan Bosch
• [PATCH] nitrogen6x: update video console name   Troy Kisky
• [PATCH V2] mkimage: fit: Do not tail-pad fitImage with external data   Marek Vasut
• Warnings on Edison   Andy Shevchenko
• [PATCH] common: update_tftp: remove unnecessary build check   Heinrich Schuchardt
• [PATCH] SPI_DM: Drop non DM support   Bhargav Shah
• [PATCH] rockchip: rockpro64: enable DM_KEYBOARD   Marcin Juszkiewicz
• [PATCH] doc: log: correct option name CONFIG_LOG_MAX_LEVEL   Patrick DELAUNAY
• [PATCH] cmd: fitupd: move config check to Kconfig   Heinrich Schuchardt
• [PATCH] mmc: davinci_mmc: Cleanup to use dt in U-boot and static platdata in SPL   Simon Glass
• [PATCH] Fix MMC access on Sabrelite   Martyn Welch
• [PATCH 1/3] kconfig: mark SPL/TPL options for DM_KEYBOARD   Marcin Juszkiewicz
• [PATCH 2/3] kconfig: fix some typos   Marcin Juszkiewicz
• [PATCH 3/3] kconfig: fix typo for OHCI host and add to DM list   Marcin Juszkiewicz
• [PATCH v2 0/4] update clock handler and proper cpu features   Sagar Shrikant Kadam
• [PATCH v2 1/4] fu540: prci: add request and free clock handlers   Sagar Shrikant Kadam
• [PATCH v2 2/4] riscv: dts: hifive-unleashed-a00: add cpu aliases   Sagar Shrikant Kadam
• [PATCH v2 3/4] riscv: cpu: fixes to display proper CPU features   Sagar Shrikant Kadam
• [PATCH v2 4/4] riscv: cpu: check and append L1 cache to cpu features   Sagar Shrikant Kadam
• [PATCH] cmd: fitupd: move config check to Kconfig   Tom Rini
• [PATCH v1 1/3] x86: acpi: Create buffers outside of the methods   Andy Shevchenko
• [PATCH v1 2/3] x86: acpi: Replace _ADR() by _UID() in description of PCI host bridge   Andy Shevchenko
• [PATCH v1 3/3] x86: acpi: Drop _ADR() where _HID() is present   Andy Shevchenko
• [PATCH] mx23evk: Remove board   Tom Rini
• [PATCHv2] mx23evk: Remove board   Tom Rini
• [PATCH] mmc: davinci_mmc: Cleanup to use dt in U-boot and static platdata in SPL   Faiz Abbas
• [PATCHv2] mx23evk: Remove board   Fabio Estevam
• [PATCH 00/14] spi: dm-conversion (part1)   Jagan Teki
• [PATCH 01/14] spi: fsl_dspi: Drop nondm code   Jagan Teki
• [PATCH 02/14] configs: igep00x0: Enable DM_SPI   Jagan Teki
• [PATCH 03/14] compulab: Drop cm_t54   Jagan Teki
• [PATCH 04/14] compulab: Drop cm_t54   Jagan Teki
• [PATCH 05/14] Overo: Drop omap3 overo   Jagan Teki
• [PATCH 06/14] Pandora: Drop omap3 pandora   Jagan Teki
• [PATCH 07/14] logicpd: Drop omap3 zoom1   Jagan Teki
• [PATCH 08/14] quipos: Drop omap3 cairo   Jagan Teki
• [PATCH 09/14] gumstix: Drop duovero   Jagan Teki
• [PATCH 10/14] ti: Drop panda board   Jagan Teki
• [PATCH 11/14] ti: Drop sdp4430 board   Jagan Teki
• [PATCH 12/14] ti: Drop omap5 uevm   Jagan Teki
• [PATCH 13/14] spi: omap3: Drop nondm code   Jagan Teki
• [PATCH 14/14] doc: driver-model: Update SPI migration status   Jagan Teki
• Bisected: omap_hsmmc 3.3V IO voltage incompatible with N900 (Was: Re: Bisected: mmc cause reboot loops on N900)   Pali Rohár
• [PATCHv2] mx23evk: Remove board   Tom Rini
• [PATCH 06/14] Pandora: Drop omap3 pandora   Tom Rini
• [PATCH 09/14] gumstix: Drop duovero   Tom Rini
• [PATCH 11/14] ti: Drop sdp4430 board   Jagan Teki
• [PATCH] video: extend stdout video console work-around for 'vga'   Tom Rini
• [PATCH v3] arm: mvebu: Convert CRS305-1G-4S board to CRS3xx-98DX3236   Luka Kovacic
• [PATCH v1] x86: acpi: Drop _HID() where enumerated by _ADR()   Andy Shevchenko
• [PATCHv2] checkpatch.pl: Add check for defining CONFIG_CMD_xxx via config files   Tom Rini
• [PATCHv2 1/8] amlogic: Remove ARCH= references from documentation   Tom Rini
• [PATCHv2 2/8] imx: Remove ARCH= references from documentation   Tom Rini
• [PATCHv2 3/8] powerpc: Remove ARCH= references from documentation   Tom Rini
• [PATCHv2 4/8] rockchip: Remove ARCH= references from documentation   Tom Rini
• [PATCHv2 5/8] arm: ti: Remove ARCH= references from documentation   Tom Rini
• [PATCHv2 6/8] m68k: Remove ARCH= references from documentation   Tom Rini
• [PATCHv2 7/8] fu540: Remove ARCH= references from documentation   Tom Rini
• [PATCHv2 8/8] cubieboard7: Remove ARCH= references from documentation   Tom Rini
• [PATCH] mmc: davinci_mmc: Cleanup to use dt in U-boot and static platdata in SPL   Simon Glass
• [PATCH] RFC: tiny-dm: Proposal for using driver model in SPL   Walter Lozano
• [PATCHv2 8/8] cubieboard7: Remove ARCH= references from documentation   Amit Tomer
• [PATCH v1 1/3] drivers: pinctrl-single: handle different register width   Rayagonda Kokatanur
• [PATCH 1/8] pfla02: Rework excluding NAND from SPL   Tom Rini
• [PATCH 2/8] mx6memcal: Finish migration to defconfig options   Tom Rini
• [PATCH 3/8] bcmstb: Migrate CONFIG_CMD_EXT[24]   Tom Rini
• [PATCH 4/8] blance: Disable CONFIG_CMD_SF / CONFIG_CMD_SPI   Tom Rini
• [PATCH 5/8] topic_miami: Disable GPIO   Tom Rini
• [PATCH 6/8] Convert CONFIG_BZIP2 et al to Kconfig   Tom Rini
• [PATCH 7/8] Convert CONFIG_CMD_ASKENV et al to Kconfig   Tom Rini
• [PATCH 8/8] Convert CONFIG_BOARD_LATE_INIT to Kconfig   Tom Rini
• [PATCH 1/1] fs: fat_write: fix short name creation.   Heinrich Schuchardt
• [PATCH 4/8] blance: Disable CONFIG_CMD_SF / CONFIG_CMD_SPI   Marek Vasut
• [PATCH v3 0/3] cmd: add driver, fs and part type listing commands   Tom Rini
• [PATCH 4/8] blance: Disable CONFIG_CMD_SF / CONFIG_CMD_SPI   Tom Rini
• [U-Boot] Pull request: u-boot-riscv/master   Tom Rini
• Fwd: New Defects reported by Coverity Scan for Das U-Boot   Heinrich Schuchardt
• [PATCH v2] tbs2910: migrate to DM_VIDEO   Anatolij Gustschin
• Fwd: New Defects reported by Coverity Scan for Das U-Boot   Tom Rini
• [PATCH] tbs2910: migrate to DM_VIDEO   Anatolij Gustschin
• Fwd: New Defects reported by Coverity Scan for Das U-Boot   Heinrich Schuchardt
• [PATCH 4/8] blance: Disable CONFIG_CMD_SF / CONFIG_CMD_SPI   Marek Vasut
• Fwd: New Defects reported by Coverity Scan for Das U-Boot   Tom Rini
• [PATCH v2] apalis_imx6: fix video stdout in default environment   Anatolij Gustschin
• [PATCH v2] colibri_imx6: fix video stdout in default environment   Anatolij Gustschin
• [PATCH] video: ipuv3: remove some useless code to reduce binary size   Anatolij Gustschin
• [PATCH] video: ipuv3: remove some useless code to reduce binary size   Tom Rini
• [PATCH] Azure: Add 'tools-only' build for macOS X hosts   Heinrich Schuchardt
• [PATCH v3 1/5] imx8mp_evk: spl: drop useless code   Fabio Estevam
• [PATCH v3 2/5] imx8mp_evk: spl: drop timer_init   Fabio Estevam
• [PATCH v3 3/5] imx8mp_evk: spl: use spl_early_init   Fabio Estevam
• [PATCH v3 4/5] imx8mp_evk: spl: no need the code since spl framework could do that   Fabio Estevam
• [PATCH v3 5/5] imx: imx8mp_evk: fix boot issue   Fabio Estevam
• [v2] Azure: Add 'tools-only' build for macOS X hosts   Tom Rini
• [PATCH][v4 5/6] board: tbs2910: Enable distro_boot support.   Denis 'GNUtoo' Carikli
• [PATCH 1/1] efi_loader: allow compiling with clang   Heinrich Schuchardt
• [PATCH 0/2] mvebu: ddr3: Armada-385 read ODT configuration   Chris Packham
• [PATCH 1/2] mv_ddr: ddr3: Use correct bitmask for read sample delay   Chris Packham
• [PATCH 2/2] mv_ddr: ddr3: Update {min,max}_read_sample calculation   Chris Packham
• [PATCH 1/1] efi_loader: allow compiling with clang   Tom Rini
• [PATCH 2/2] mv_ddr: ddr3: Update {min, max}_read_sample calculation   Baruch Siach
• [PATCH v3] arm: mvebu: Convert CRS305-1G-4S board to CRS3xx-98DX3236   Stefan Roese
• [PATCH] SPI_DM: Drop non DM support   Stefan Roese
• [PATCH 1/2] mv_ddr: ddr3: Use correct bitmask for read sample delay   Stefan Roese
• [PATCH 2/2] mv_ddr: ddr3: Update {min,max}_read_sample calculation   Stefan Roese
• [PATCH] mmc: fsl_esdhc: Fix SDR104 and HS200 support   Jaehoon Chung
• [PATCH] mmc: fsl_esdhc: Gracefully fail on unsupported voltage switch   Jaehoon Chung
• [PATCH] mmc: sdhci: Fix HISPD bit handling   Jaehoon Chung
• [PATCH 1/5] dm: core: Fix devfdt_get_addr_ptr return value   Ovidiu Panait
• [PATCH 2/5] pinctrl: bcm283x: DM_FLAG_PRE_RELOC: Remove OF_CONTROL check   Ovidiu Panait
• [PATCH 3/5] pinctrl: bcm283x: Read address from DT in ofdata_to_platdata   Ovidiu Panait
• [PATCH 4/5] pinctrl: bcm283x: Fix return value check for dev_read_addr_ptr   Ovidiu Panait
• [PATCH 5/5] pinctrl: bcm283x: Store the return value of dev_read_u32_default to int   Ovidiu Panait
• [PATCH 1/7] Revert "mmc: zynq: parse dt when probing"   Jaehoon Chung
• Please pull u-boot-x86   Bin Meng
• [PATCH 2/7] mmc: zynq_sdhci: Define timing macro's   Jaehoon Chung
• [PATCH 2/7] mmc: zynq_sdhci: Define timing macro's   Faiz Abbas
• [PATCH v2 0/2] Fix boot from SPI flash on Synology DS414   Stefan Roese
• [PATCH] arch: arm: uDPU: fix PHY mode definition to sgmii-2500   Stefan Roese
• [PATCH v3] arm: mvebu: Convert CRS305-1G-4S board to CRS3xx-98DX3236   Stefan Roese
• Please pull u-boot-marvell/master   Stefan Roese
• [PATCH] cmd: fitupd: move config check to Kconfig   Lukasz Majewski
• [PATCH v2] doc: log: correct option name CONFIG_LOG_MAX_LEVEL   Patrick Delaunay
• [PATCH 0/1] Add support for booting into userspace fastboot   Roman Kovalivskyi
• [PATCH 1/1] fastboot: add support for 'reboot fastboot' command   Roman Kovalivskyi
• [PATCH 1/2] riscv: sbi: Remove sbi_spec_version   Bin Meng
• [PATCH 2/2] riscv: sbi: Move sbi_probe_extension() out of CONFIG_SBI_V01   Bin Meng
• [PATCH 1/8] pfla02: Rework excluding NAND from SPL   Stefano Babic
• [U-boot,0/2] Enable mt7531 switch support for MT7629   MarkLee
• [U-boot, 1/2] eth: mtk-eth: enable mt7629 sgmii mode support in mediatek eth driver   MarkLee
• [U-boot, 2/2] arm: dts: mediatek: enable sgmii mode and mt7531 switch for mt7629   MarkLee
• [PATCH 3/4] x86: coral: Correct some FSP-S settings   Simon Glass
• [PATCH v2 1/4] x86: coral: Correct some FSP-M settings   Simon Glass
• [PATCH v2 2/4] x86: apl: Add hex offsets for registers in FSP-M   Simon Glass
• [PATCH v2 3/4] x86: coral: Correct some FSP-S settings   Simon Glass
• [PATCH v2 4/4] x86: apl: Add hex offsets for registers in FSP-S   Simon Glass
• uboot and persistent snapshot booting   Jori van Dam
• [PATCH v3 0/4] Fix the SPL loading of a FIT image from NAND   Dario Binacchi
• [PATCH v3 1/4] spl: fix format of function documentation   Dario Binacchi
• [PATCH v3 2/4] spl: fit: fail fit loading in case of FDT appending error   Dario Binacchi
• [PATCH v3 3/4] spl: fit: nand: fix fit loading in case of bad blocks   Dario Binacchi
• [PATCH v3 4/4] spl: fit: improve spl_nand_fit_read(...) readability   Dario Binacchi
• [PATCH 1/5] dm: core: Fix devfdt_get_addr_ptr return value   Matthias Brugger
• [PATCH v4 2/9] usb: xhci: Use only 32-bit accesses in xhci_writeq/xhci_readq   Matthias Brugger
• [PATCH 01/14] spi: fsl_dspi: Drop nondm code   Jagan Teki
• [PATCH v2 0/5] powerpc, mpc83xx: add DM_ETH support   Heiko Schocher
• [PATCH v2 1/5] mpc83xx: remove unneeded extern declaration in cpu_init   Heiko Schocher
• [PATCH v2 2/5] powerpc, qe: fix codingstyle issues for drivers/qe   Heiko Schocher
• [PATCH v2 3/5] powerpc, qe: add DTS support for parallel I/O ports   Heiko Schocher
• [PATCH v2 4/5] net, qe: add DM support for QE UEC ethernet   Heiko Schocher
• [PATCH v2 5/5] mpc83xx, keymile boards: enable DM_ETH and add DTS   Heiko Schocher
• [PATCH 0/8] regmap: Add managed API, regmap fields, regmap config   Pratyush Yadav
• [PATCH 1/8] regmap: Add devm_regmap_init()   Pratyush Yadav
• [PATCH 2/8] regmap: zero out the regmap on allocation   Pratyush Yadav
• [PATCH 3/8] regmap: Allow specifying read/write width   Pratyush Yadav
• [PATCH 4/8] regmap: Allow left shifting register offset before access   Pratyush Yadav
• [PATCH 5/8] regmap: Add regmap_init_mem_range()   Pratyush Yadav
• [PATCH 6/8] regmap: Allow devices to specify regmap range start and size in config   Pratyush Yadav
• [PATCH 7/8] regmap: Add support for regmap fields   Pratyush Yadav
• [PATCH 8/8] test: dm: Add tests for regmap managed API and regmap fields   Pratyush Yadav
• [PATCH v2 00/23] spi: dm-conversion (part1)   Jagan Teki
• [PATCH v2 01/23] configs: igep00x0: Enable DM_SPI   Jagan Teki
• [PATCH v2 02/23] am335x: sl50: Enable DM_SPI   Jagan Teki
• [PATCH v2 03/23] am335x: baltos: Enable DM_SPI   Jagan Teki
• [PATCH 1/1] fastboot: add support for 'reboot fastboot' command   Alex Kiernan
• [PATCH v2 04/23] am335x: igep003x: Enable DM_SPI   Jagan Teki
• [PATCH v2 05/23] siemens: draco: Enable DM_SPI, DM_SPI_FLASH   Jagan Teki
• [PATCH v2 06/23] siemens: pxm2: Enable DM_SPI, DM_SPI_FLASH   Jagan Teki
• [PATCH v2 07/23] siemens: rut: Enable DM_SPI, DM_SPI_FLASH   Jagan Teki
• [PATCH v2 08/23] compulab: Drop cm_t54   Jagan Teki
• [PATCH v2 09/23] compulab: Drop cm_t35   Jagan Teki
• [PATCH v2 10/23] overo: Drop omap3 overo   Jagan Teki
• [PATCH v2 11/23] pandora: Drop omap3 pandora   Jagan Teki
• [PATCH v2 12/23] logicpd: Drop omap3 zoom1   Jagan Teki
• [PATCH v2 13/23] quipos: Drop omap3 cairo   Jagan Teki
• [PATCH v2 14/23] gumstix: Drop duovero   Jagan Teki
• [PATCH v2 15/23] ti: Drop panda board   Jagan Teki
• [PATCH v2 16/23] ti: Drop sdp4430 board   Jagan Teki
• [PATCH v2 17/23] ti: Drop omap5 uevm   Jagan Teki
• [PATCH v2 18/23] birdland: Drop bav335x   Jagan Teki
• [PATCH v2 19/23] gumstix: Drop pepper   Jagan Teki
• [PATCH v2 20/23] phytec: Drop pcm051   Jagan Teki
• [PATCH v2 21/23] silica: Drop pengwyn   Jagan Teki
• [PATCH v2 22/23] spi: omap3: Drop nondm code   Jagan Teki
• [PATCH v2 23/23] doc: driver-model: Update SPI migration status   Jagan Teki
• [PATCH] x86: minnowmax: Add support for Winbond flash   Simon Glass
• [PATCH v2 0/4] x86: Correct SPI memory-mapping query   Simon Glass
• [PATCH v2 1/4] x86: spi: Add a way to access the SPI mapping via registers   Simon Glass
• [PATCH v2 2/4] x86: spi: Rewrite logic for obtaining the SPI memory map   Simon Glass
• [PATCH v2 3/4] x86: spl: Print the error on SPL failure   Simon Glass
• [PATCH v2 4/4] x86: mrccache: Allow use before driver model is active   Simon Glass
• [PATCH 2/3] x86: spi: Rewrite logic for obtaining the SPI memory map   Simon Glass
• [PATCH v2 14/35] acpigen: Support writing a package   Wolfgang Wallner
• [PATCH] spi: cadence_spi: Add octal and quad write support   Pratyush Yadav
• 8e35bb07eb mkimage: Support automatic creating of a FIT without a .its   Simon Glass
• [PATCH] mkimage: Default to adding a crc32 hash with '-f auto'   Simon Glass
• [PATCH v2 00/23] spi: dm-conversion (part1)   Simon Glass
• [PATCH 0/2] sun8i-emac: sun8i-v3s compatibility for sun8i-emac   Benedikt-Alexander Mokroß
• [PATCH 1/2] sun8i-emac: sun8i-v3s compatibility for sun8i-emac   Benedikt-Alexander Mokroß
• [PATCH 2/2] sun8i-emac: Added sun8i-v3s-emac example to sun8i-v3s.dtsi   Benedikt-Alexander Mokroß
• [PATCH 1/5] ARM: stm32: Re-enable KS8851 on DHCOM   Patrick DELAUNAY
• [PATCH 2/5] ARM: stm32: Hog GPIO PF7 high on DHCOR to unlock SPI NOR nWP   Patrick DELAUNAY
• [PATCH 3/5] ARM: dts: stm32: Add alternate pinmux for I2C2 pins   Patrick DELAUNAY
• [PATCH 4/5] ARM: dts: stm32: Repair I2C2 operation on AV96   Patrick DELAUNAY
• [PATCH 5/5] ARM: dts: stm32: Disable SDR104 mode on AV96   Patrick DELAUNAY
• [PATCH v2 1/2] tools: k3_gen_x509_cert: Allow selecting early JTAG debug value   Andrew F. Davis
• [PATCH v2 2/2] tools: k3_gen_x509_cert: Set default early HS JTAG access to disabled   Andrew F. Davis
• [PATCH v2 20/23] phytec: Drop pcm051   Lars Poeschel
• [PATCH v2 1/4] fu540: prci: add request and free clock handlers   Pragnesh Patel
• [PATCH v2 3/4] riscv: cpu: fixes to display proper CPU features   Pragnesh Patel
• [PATCH v1] x86: acpi: Drop _HID() where enumerated by _ADR()   Andy Shevchenko
• [PATCH v2 4/4] riscv: cpu: check and append L1 cache to cpu features   Pragnesh Patel
• rk3399: SPI boot: Return from ROM unsuccessful (with TPL)   Jagan Teki
• uboot and persistent snapshot booting   Michael Nazzareno Trimarchi
• [PATCH v2 00/23] spi: dm-conversion (part1)   Jagan Teki
• Please pull u-boot-x86   Tom Rini
• Please pull u-boot-marvell/master   Tom Rini
• [PATCH 00/24] spi: dm-conversion (part2)   Jagan Teki
• [PATCH 01/24] arm: Remove configs/B4420QDS_NAND_defconfig board   Jagan Teki
• [PATCH 02/24] arm: Remove configs/BSC9131RDB_NAND_SYSCLK100_defconfig board   Jagan Teki
• [PATCH 03/24] arm: Remove configs/BSC9132QDS_NAND_DDRCLK100_SECURE_defconfig board   Jagan Teki
• [PATCH 04/24] arm: Remove configs/C29XPCIE_NAND_defconfig board   Jagan Teki
• [PATCH 05/24] arm: Remove configs/Cyrus_P5020_defconfig board   Jagan Teki
• [PATCH 06/24] arm: Remove configs/MPC8536DS_36BIT_defconfig board   Jagan Teki
• [PATCH 07/24] arm: Remove configs/P1010RDB-PA_36BIT_NAND_SECBOOT_defconfig board   Jagan Teki
• [PATCH 08/24] arm: Remove configs/P1020MBG-PC_36BIT_SDCARD_defconfig board   Jagan Teki
• [PATCH 09/24] arm: Remove configs/P1022DS_36BIT_NAND_defconfig board   Jagan Teki
• [PATCH 10/24] arm: Remove configs/P2041RDB_NAND_defconfig board   Jagan Teki
• [PATCH 11/24] arm: Remove configs/P3041DS_NAND_SECURE_BOOT_defconfig board   Jagan Teki
• [PATCH 12/24] arm: Remove configs/T1023RDB_NAND_defconfig board   Jagan Teki
• [PATCH 13/24] arm: Remove configs/T1024QDS_DDR4_SECURE_BOOT_defconfig board   Jagan Teki
• [PATCH 14/24] arm: Remove configs/T1040D4RDB_NAND_defconfig board   Jagan Teki
• [PATCH 15/24] arm: Remove configs/T1040QDS_DDR4_defconfig board   Jagan Teki
• [PATCH 16/24] arm: Remove configs/T2080QDS_NAND_defconfig board   Jagan Teki
• [PATCH 17/24] arm: Remove configs/T2080RDB_NAND_defconfig board   Jagan Teki
• [PATCH 18/24] arm: Remove configs/T4160QDS_NAND_defconfig board   Jagan Teki
• [PATCH 19/24] arm: Remove configs/T4160RDB_defconfig board   Jagan Teki
• [PATCH 20/24] arm: Remove configs/TWR-P1025_defconfig board   Jagan Teki
• [PATCH 21/24] arm: Remove configs/controlcenterd_36BIT_SDCARD_DEVELOP_defconfig board   Jagan Teki
• [PATCH 22/24] arm: Remove configs/kmcoge4_defconfig board   Jagan Teki
• [PATCH 23/24] spi: Zap fsl_espi   Jagan Teki
• [PATCH 24/24] mtd: spi: Drop fsl_espi_spl   Jagan Teki
• [PATCH v1 1/3] drivers: reset: Handle gracefully NULL pointers   Pratyush Yadav
• [PATCH 5/5] ARM: dts: stm32: Disable SDR104 mode on AV96   Marek Vasut
• [PATCH 0/4] arm: fix clang build errors   Heinrich Schuchardt
• [PATCH 1/4] efi_loader: allow compiling with clang   Heinrich Schuchardt
• [PATCH 2/4] trace: clang compatible handling of gd register   Heinrich Schuchardt
• [PATCH 3/4] arm: remove outdated comment concerning -ffixed-x18   Heinrich Schuchardt
• [PATCH 4/4] arm: use correct argument size of special registers   Heinrich Schuchardt
• [PATCH 1/9] spi Drop spi_init()   Jagan Teki
• [PATCH 2/9] spi: Kconfig: Drop redundant CF_SPI definition   Jagan Teki
• [PATCH 3/9] spi: Kconfig: Move MSCC_BB_SPI, FSL_QSPI into DM_SPI   Jagan Teki
• [PATCH 00/24] spi: dm-conversion (part2)   Joakim Tjernlund
• [PATCH 00/24] spi: dm-conversion (part2)   Jagan Teki
• [PATCH 1/3] spi: atmel: Drop CONFIG_SYS_SPI_WRITE_TOUT   Jagan Teki
• [PATCH 2/3] spi: atmel: Remove nondm code   Jagan Teki
• [PATCH 3/3] spi: atmel: Drop atmel_spi.h   Jagan Teki
• eSPI was: [PATCH] Revert "mpc85xx: ddr: Always start DDR RAM in Self Refresh mode"   Joakim Tjernlund
• eSPI was: [PATCH] Revert "mpc85xx: ddr: Always start DDR RAM in Self Refresh mode"   Jagan Teki
• [PATCH 5/9] spi: davinci: Drop non-dm code   Adam Ford
• [PATCH v1] x86: acpi: Drop _HID() where enumerated by _ADR()   Bin Meng
• [PATCH 00/24] spi: dm-conversion (part2)   Bin Meng
• [PATCH v4 2/9] usb: xhci: Use only 32-bit accesses in xhci_writeq/xhci_readq   Bin Meng
• SDwire boards?   Simon Glass
• [PATCH] I2C: ls1043a, ls1046a: enable SYS_I2C_MXC   Biwen Li
• [PATCH v12 01/18] misc: add driver for the SiFive otp controller   Simon Glass
• [PATCH v2 00/23] spi: dm-conversion (part1)   Simon Glass
• [PATCH v2] misc: i2c_eeprom: implement different probe test eeprom offset   Heiko Schocher
• [PATCH 02/24] arm: Remove configs/BSC9131RDB_NAND_SYSCLK100_defconfig board   Priyanka Jain
• [PATCH v2] misc: i2c_eeprom: implement different probe test eeprom offset   Eugen.Hristev at microchip.com
• [PATCH][v4 5/6] board: tbs2910: Enable distro_boot support.   Soeren Moch
• [PATCH 03/24] arm: Remove configs/BSC9132QDS_NAND_DDRCLK100_SECURE_defconfig board   Priyanka Jain
• [PATCH 04/24] arm: Remove configs/C29XPCIE_NAND_defconfig board   Priyanka Jain
• [PATCH 06/24] arm: Remove configs/MPC8536DS_36BIT_defconfig board   Priyanka Jain
• [PATCH] mkimage: Default to adding a crc32 hash with '-f auto'   Wolfgang Denk
• [PATCH 09/24] arm: Remove configs/P1022DS_36BIT_NAND_defconfig board   Priyanka Jain
• [PATCH 10/24] arm: Remove configs/P2041RDB_NAND_defconfig board   Priyanka Jain
• SDwire boards?   Stefan Roese
• [EXT] Re: [Patch v4] net: pfe_eth: Use spi_flash_read API to access flash memory   Kuldeep Singh
• [RESEND][Patch v4] net: pfe_eth: Use spi_flash_read API to access flash memory   Kuldeep Singh
• [PATCH] spi: cadence_spi: Add octal and quad write support   Tan, Ley Foon
• [PATCH v1 1/3] x86: acpi: Create buffers outside of the methods   Bin Meng
• [PATCH 01/24] arm: Remove configs/B4420QDS_NAND_defconfig board   Priyanka Jain
• [PATCH 15/24] arm: Remove configs/T1040QDS_DDR4_defconfig board   Priyanka Jain
• [PATCH 17/24] arm: Remove configs/T2080RDB_NAND_defconfig board   Priyanka Jain
• [PATCH 19/24] arm: Remove configs/T4160RDB_defconfig board   Priyanka Jain
• [PATCH 07/24] arm: Remove configs/P1010RDB-PA_36BIT_NAND_SECBOOT_defconfig board   Priyanka Jain
• [PATCH 08/24] arm: Remove configs/P1020MBG-PC_36BIT_SDCARD_defconfig board   Priyanka Jain
• [PATCH v1 1/3] x86: acpi: Create buffers outside of the methods   Bin Meng
• Failsafe booting to alternate linux image/fs   Brendan Simon (eTRIX)
• [PATCH 12/24] arm: Remove configs/T1023RDB_NAND_defconfig board   Priyanka Jain
• [PATCH 11/24] arm: Remove configs/P3041DS_NAND_SECURE_BOOT_defconfig board   Priyanka Jain
• [PATCH 13/24] arm: Remove configs/T1024QDS_DDR4_SECURE_BOOT_defconfig board   Priyanka Jain
• [PATCH 14/24] arm: Remove configs/T1040D4RDB_NAND_defconfig board   Priyanka Jain
• [PATCH 20/24] arm: Remove configs/TWR-P1025_defconfig board   Priyanka Jain
• [PATCH 16/24] arm: Remove configs/T2080QDS_NAND_defconfig board   Priyanka Jain
• Failsafe booting to alternate linux image/fs   Brendan Simon (eTRIX)
• [PATCH 18/24] arm: Remove configs/T4160QDS_NAND_defconfig board   Priyanka Jain
• [PATCH 24/24] mtd: spi: Drop fsl_espi_spl   Priyanka Jain
• [PATCH 23/24] spi: Zap fsl_espi   Priyanka Jain
• [PATCH v2 1/4] x86: spi: Add a way to access the SPI mapping via registers   Bin Meng
• [PATCH v2 2/4] x86: spi: Rewrite logic for obtaining the SPI memory map   Bin Meng
• [PATCH v2 3/4] x86: spl: Print the error on SPL failure   Bin Meng
• [PATCH v2 4/4] x86: mrccache: Allow use before driver model is active   Bin Meng
• [PATCH 5/5] ARM: dts: stm32: Disable SDR104 mode on AV96   Patrick DELAUNAY
• [PATCH v2 1/4] x86: spi: Add a way to access the SPI mapping via registers   Bin Meng
• [PATCH v2 2/4] x86: spi: Rewrite logic for obtaining the SPI memory map   Bin Meng
• [PATCH v2 3/4] x86: spl: Print the error on SPL failure   Bin Meng
• [PATCH v2 4/4] x86: mrccache: Allow use before driver model is active   Bin Meng
• [PATCH] x86: minnowmax: Add support for Winbond flash   Bin Meng
• [PATCH] tbs2910: migrate to DM_VIDEO   Soeren Moch
• [PATCH v2 1/4] x86: coral: Correct some FSP-M settings   Bin Meng
• [PATCH v2 2/4] x86: apl: Add hex offsets for registers in FSP-M   Bin Meng
• [PATCH v2 3/4] x86: coral: Correct some FSP-S settings   Bin Meng
• [PATCH v2 4/4] x86: apl: Add hex offsets for registers in FSP-S   Bin Meng
• [PATCH v2 1/4] x86: coral: Correct some FSP-M settings   Bin Meng
• [PATCH v2 2/4] x86: apl: Add hex offsets for registers in FSP-M   Bin Meng
• [PATCH v2 3/4] x86: coral: Correct some FSP-S settings   Bin Meng
• [PATCH v2 4/4] x86: apl: Add hex offsets for registers in FSP-S   Bin Meng
• [PATCH] x86: minnowmax: Add support for Winbond flash   Bin Meng
• [PATCH 1/2] riscv: Avoid the reserved memory fixup if src and dst point to the same place   Rick Chen
• [PATCH] tbs2910: migrate to DM_VIDEO   Anatolij Gustschin
• [PULL] Pull request: u-boot-stm32 for v2020.07: u-boot-stm32-20200528   Patrick DELAUNAY
• [RESEND][Patch v4] net: pfe_eth: Use spi_flash_read API to access flash memory   Schrempf Frieder
• [PATCH 2/2] riscv: Enable CONFIG_OF_BOARD_FIXUP by default   Rick Chen
• [PATCH 2/2] riscv: Enable CONFIG_OF_BOARD_FIXUP by default   Bin Meng
• [PATCH v2 1/3] riscv: Avoid the reserved memory fixup if src and dst point to the same place   Bin Meng
• [PATCH v2 2/3] riscv: Expand the DT size before copy reserved memory node   Bin Meng
• [PATCH v2 3/3] riscv: Enable CONFIG_OF_BOARD_FIXUP by default   Bin Meng
• [PATCH 2/2] riscv: Enable CONFIG_OF_BOARD_FIXUP by default   Bin Meng
• [PATCH v2 1/4] fu540: prci: add request and free clock handlers   Sagar Kadam
• [PATCH v2 4/4] riscv: cpu: check and append L1 cache to cpu features   Sagar Kadam
• [PATCH] spi: cadence_spi: Add octal and quad write support   Pratyush Yadav
• [PATCH v2 1/4] x86: tangier: acpi: Create buffers outside of the methods   Andy Shevchenko
• [PATCH v2 2/4] x86: tangier: acpi: Replace _ADR() by _UID() in description of PCI host bridge   Andy Shevchenko
• [PATCH v2 3/4] x86: tangier: acpi: Drop _ADR() where _HID() is present   Andy Shevchenko
• [PATCH v2 4/4] x86: tangier: acpi: Drop _HID() where enumerated by _ADR()   Andy Shevchenko
• [PATCH v1 1/3] x86: acpi: Create buffers outside of the methods   Andy Shevchenko
• [PATCH 1/5] dm: core: Fix devfdt_get_addr_ptr return value   Cédric Le Goater
• [PATCH] spi: cadence_spi: Add octal and quad write support   Tan, Ley Foon
• ICH SPI write seems broken   Bin Meng
• [U-Boot] [PATCH 0/2] misc: i2c_eeprom: add paritioning and size query   Michal Simek
• [PATCH v7 3/8] i2c: i2c-cortina: added CAxxxx I2C support   Heiko Schocher
• [U-Boot] [PATCH 0/2] misc: i2c_eeprom: add paritioning and size query   Michal Simek
• [PATCH v2 11/23] pandora: Drop omap3 pandora   Gražvydas Ignotas
• [PATCH 00/24] spi: dm-conversion (part2)   Priyanka Jain
• [PATCH v2 15/35] acpi: Support writing an integer   Wolfgang Wallner
• Antwort: [PATCH v2 16/35] acpi: Support writing a string   Wolfgang Wallner
• [PATCH 00/24] spi: dm-conversion (part2)   Jagan Teki
• [PATCH v2 17/35] acpi: Support writing a name   Wolfgang Wallner
• [PATCH 00/24] spi: dm-conversion (part2)   Jagan Teki
• [PATCH 5/5] ARM: dts: stm32: Disable SDR104 mode on AV96   Marek Vasut
• [PATCH v2 18/35] acpi: Support writing a UUID   Wolfgang Wallner
• [PATCH] serial: Add missing Kconfig dependencies for debug consoles   Michal Simek
• ICH SPI write seems broken   Simon Glass
• [PATCH v2 19/35] acpi: Support writing Device Properties objects via _DSD   Wolfgang Wallner
• [PATCH] arm: dts: meson-gxl: fix USB gadget by adding missing nodes for U-Boot   Neil Armstrong
• [PATCH] dm: test: Add a test for dm_test_dev_read_addr_ptr()   Simon Glass
• [PATCH v6 13/16] driver: usb: drop legacy rockchip xhci driver   Heiko Stuebner
• [PATCH 1/5] dm: core: Fix devfdt_get_addr_ptr return value   Simon Glass
• Cannot boot firefly-rk3399: mmc block read error   Simon Glass
• [PATCH] tools: fw_env: Fix warning when reading too little   Harald Seiler
• [PATCH v2] colibri_imx6: fix video stdout in default environment   Igor Opaniuk
• [PATCH v2] apalis_imx6: fix video stdout in default environment   Igor Opaniuk
• Cannot boot firefly-rk3399: mmc block read error   Mark Kettenis
• Cannot boot firefly-rk3399: mmc block read error   Jagan Teki
• [PATCH 1/4] efi_loader: aarch64: align runtime section to 64kb   Heinrich Schuchardt
• [PATCH v2 2/2] rockchip: Enable PCIe and NVMe on ROCKPro64   Kurt Miller
• [PATCH] pci: Make Rockchip PCIe voltage regulators optional   Kurt Miller
• imx: move ATF to the back of the FIT to fix loading over yModem   Patrick Wildt
• [PATCH 1/5] dm: core: Fix devfdt_get_addr_ptr return value   Sean Anderson
• [PATCH] rockchip: rockpro64: Set cooling levels for pwm-fan   Kurt Miller
• [PATCH v2] spl: allow board_spl_fit_post_load() to fail   Patrick Wildt
• [PATCH 07/24] arm: Remove configs/P1010RDB-PA_36BIT_NAND_SECBOOT_defconfig board   Tom Rini
• [PATCH 08/24] arm: Remove configs/P1020MBG-PC_36BIT_SDCARD_defconfig board   Tom Rini
• [PATCH 12/24] arm: Remove configs/T1023RDB_NAND_defconfig board   Tom Rini
• [PATCH 08/24] arm: Remove configs/P1020MBG-PC_36BIT_SDCARD_defconfig board   Simon Glass
• [PATCH 11/24] arm: Remove configs/P3041DS_NAND_SECURE_BOOT_defconfig board   Tom Rini
• [PATCH 14/24] arm: Remove configs/T1040D4RDB_NAND_defconfig board   Tom Rini
• [PATCH 16/24] arm: Remove configs/T2080QDS_NAND_defconfig board   Tom Rini
• [PATCH 08/24] arm: Remove configs/P1020MBG-PC_36BIT_SDCARD_defconfig board   Tom Rini
• Failsafe booting to alternate linux image/fs   Brendan Simon (eTRIX)
• [PATCH 1/5] dm: core: Fix devfdt_get_addr_ptr return value   Simon Glass
• [PATCH] serial: Add missing Kconfig dependencies for debug consoles   Simon Glass
• [PATCH] Add support for SHA384 and SHA512   Reuben Dowle
• [PATCH v2 2/4] riscv: dts: hifive-unleashed-a00: add cpu aliases   Pragnesh Patel
• [PATCH v13 00/19] RISC-V SiFive FU540 support SPL   Pragnesh Patel
• [PATCH v13 01/19] misc: add driver for the SiFive otp controller   Pragnesh Patel
• [PATCH v13 02/19] riscv: sifive: fu540: Use OTP DM driver for serial environment variable   Pragnesh Patel
• [PATCH v13 03/19] riscv: Add _image_binary_end for SPL   Pragnesh Patel
• [PATCH v13 04/19] lib: Makefile: build crc7.c when CONFIG_MMC_SPI   Pragnesh Patel
• [PATCH v13 05/19] riscv: sifive: dts: fu540: Add board -u-boot.dtsi files   Pragnesh Patel
• [PATCH v13 06/19] sifive: fu540: add ddr driver   Pragnesh Patel
• [PATCH v13 07/19] sifive: dts: fu540: Add DDR controller and phy register settings   Pragnesh Patel
• [PATCH v13 08/19] riscv: sifive: dts: fu540: add U-Boot dmc node   Pragnesh Patel
• [PATCH v13 09/19] clk: sifive: fu540-prci: Add clock enable and disable ops   Pragnesh Patel
• [PATCH v13 10/19] clk: sifive: fu540-prci: Add ddr clock initialization   Pragnesh Patel
• [PATCH v13 11/19] clk: sifive: fu540-prci: Release ethernet clock reset   Pragnesh Patel
• [PATCH v13 12/19] riscv: sifive: dts: fu540: set ethernet clock rate   Pragnesh Patel
• [PATCH v13 13/19] riscv: dts: sifive: Sync hifive-unleashed-a00 dts from linux   Pragnesh Patel
• [PATCH v13 14/19] riscv: cpu: fu540: Add support for cpu fu540   Pragnesh Patel
• [PATCH v13 15/19] riscv: sifive: fu540: add SPL configuration   Pragnesh Patel
• [PATCH v13 16/19] sifive: fu540: Add sample SD gpt partition layout   Pragnesh Patel
• [PATCH v13 17/19] sifive: fu540: Add U-Boot proper sector start   Pragnesh Patel
• [PATCH v13 18/19] configs: fu540: Add config options for U-Boot SPL   Pragnesh Patel
• [PATCH v13 19/19] doc: sifive: fu540: Add description for OpenSBI generic platform   Pragnesh Patel
• imx: move ATF to the back of the FIT to fix loading over yModem   Sébastien Szymanski
• [PATCH 00/13] efi_loader: rework/improve UEFI secure boot code   AKASHI Takahiro
• [PATCH 01/13] efi_loader: signature: move efi_guid_cert_type_pkcs7 to efi_signature.c   AKASHI Takahiro
• [PATCH 02/13] efi_loader: image_loader: add a check against certificate type of authenticode   AKASHI Takahiro
• [PATCH 03/13] efi_loader: image_loader: retrieve authenticode only if it exists   AKASHI Takahiro
• [PATCH 04/13] efi_loader: signature: fix a size check against revocation list   AKASHI Takahiro
• [PATCH 05/13] efi_loader: signature: make efi_hash_regions more generic   AKASHI Takahiro
• [PATCH 06/13] efi_loader: image_loader: verification for all signatures should pass   AKASHI Takahiro
• [PATCH 07/13] efi_loader: image_loader: add digest-based verification for signed image   AKASHI Takahiro
• [PATCH 08/13] test/py: efi_secboot: remove all "re.search"   AKASHI Takahiro
• [PATCH 09/13] test/py: efi_secboot: fix test case 1g of test_authvar   AKASHI Takahiro
• [PATCH 10/13] test/py: efi_secboot: split "signed image" test case-1 into two cases   AKASHI Takahiro
• [PATCH 11/13] test/py: efi_secboot: add a test against certificate revocation   AKASHI Takahiro
• [PATCH 12/13] test/py: efi_secboot: add a test for multiple signatures   AKASHI Takahiro
• [PATCH 13/13] test/py: efi_secboot: add a test for verifying with digest of signed image   AKASHI Takahiro
• [PATCH 0/2] Enable all cache ways and Enable SiFive PWM driver   Pragnesh Patel
• [PATCH 1/2] riscv: sifive: fu540: enable all cache ways from U-Boot proper   Pragnesh Patel
• [PATCH 2/2] riscv: sifive: fu540: Enable SiFive PWM driver   Pragnesh Patel
• [PATCH v12 01/18] misc: add driver for the SiFive otp controller   Pragnesh Patel
• [PATCH] rockchip: rockpro64: Set cooling levels for pwm-fan   Peter Robinson
• [PATCH 1/3] doc: board: rockchip: Improve supported board list format   Kever Yang
• [PATCH 2/3] doc: board: rockchip: Add missing supported boards   Kever Yang
• [PATCH 3/3] doc: rockchip: Remove list of supported boards   Kever Yang
• [PATCH 0/5] Enable I2C in SPL, support runtime detection of add-on board   Kever Yang
• Failsafe booting to alternate linux image/fs   Michal Simek
• [PATCH] rockchip: enable RNG on RockPro64   Kever Yang
• [PATCH] rockchip: enable USB OHCI host for RockPro64   Kever Yang
• [PATCH] rockchip: rockpro64: enable DM_KEYBOARD   Kever Yang
• [PATCH v6 04/16] arm: mach-rockchip: bind sub-nodes for rk3399_syscon   Kever Yang
• [PATCH 01/13] efi_loader: signature: move efi_guid_cert_type_pkcs7 to efi_signature.c   Heinrich Schuchardt
• [PATCH v2] spi: Kirkwood: Drop non-DM support and enable DM_SPI on all boards   Bhargav Shah
• [PATCH 02/13] efi_loader: image_loader: add a check against certificate type of authenticode   Heinrich Schuchardt
• [PATCH 0/5] Enable I2C in SPL, support runtime detection of add-on board   Jagan Teki
• [PATCH] board: xilinx/zynqmp: Remove 1-second delay at boot   Michal Simek
• [PULL u-boot] Please pull u-boot-amlogic-20200529   Neil Armstrong
• [PATCH] arm: dts: meson-gxl: fix USB gadget by adding missing nodes for U-Boot   Neil Armstrong
• [PATCH v4 0/6] Introduce DSA Ethernet switch class and Felix driver   Claudiu Manoil
• [PATCH 08/24] arm: Remove configs/P1020MBG-PC_36BIT_SDCARD_defconfig board   Jagan Teki
• [PATCH v2 11/23] pandora: Drop omap3 pandora   Jagan Teki
• [PATCH v2 20/23] phytec: Drop pcm051   Jagan Teki
• [PATCH] rockchip: rockpro64: Set cooling levels for pwm-fan   Kurt Miller
• [PATCH 1/2] riscv: sifive: fu540: enable all cache ways from U-Boot proper   Bin Meng
• [PATCH v13 12/19] riscv: sifive: dts: fu540: set ethernet clock rate   Bin Meng
• [PATCH v2] spi: Kirkwood: Drop non-DM support and enable DM_SPI on all boards   Jagan Teki
• [PATCH 08/24] arm: Remove configs/P1020MBG-PC_36BIT_SDCARD_defconfig board   Tom Rini
• Cannot boot firefly-rk3399: mmc block read error   Simon Glass
• [PATCH] configs: rpi: set NR_DRAM_BANKS to four   matthias.bgg at kernel.org
• [PATCH] image: android: fix abootimg support   Christian Gmeiner
• [PATCH 0/4] Add support for LX TestBox   Benedikt Spranger
• [PATCH 1/4] sunxi: pmic_bus: Refactor pmic_bus_read() and pmic_bus_write()   Benedikt Spranger
• [PATCH 2/4] i2c: mvtwsi: Add Allwinner sun4i compatible   Benedikt Spranger
• [PATCH 3/4] sunxi: pmic_bus: Add DM I2C support   Benedikt Spranger
• [PATCH 4/4] common: Add LX TestBox checks   Benedikt Spranger
• [PATCH] board: dh_stm32mp1: update the gpio hog support   Patrick Delaunay
• [PATCH] power: pmic: Add SPL Kconfig entry for PFUZE100   Marek Vasut
• [PATCH] env: Add H_DEFAULT flag   Marek Vasut
• [PATCH] env: Fix invalid env handling in env_init()   Marek Vasut
• [PATCH] env: nowhere: Implement .load callback   Marek Vasut
• [PATCH] rockchip: enable RNG on RockPro64   Marcin Juszkiewicz
• [PATCH] env: Add option to only ever append environment   Marek Vasut
• [PATCH] env: Add support for explicit write access list   Marek Vasut
• [PATCH 00/10] improve OF_PLATDATA support   Walter Lozano
• [PATCH 01/10] dtoc: add support to scan drivers   Walter Lozano
• [PATCH 02/10] dtoc: add option to disable warnings   Walter Lozano
• [PATCH 03/10] dm: doc: update of-plat with the suppor for driver aliases   Walter Lozano
• [PATCH 04/10] core: drop const for struct driver_info   Walter Lozano
• [PATCH 05/10] core: extend struct driver_info to point to device   Walter Lozano
• [PATCH 06/10] dtoc: extend dtoc to use struct driver_info when linking nodes   Walter Lozano
• [PATCH 07/10] dm: doc: update of-plat with new phandle support   Walter Lozano
• [PATCH 08/10] dtoc: update tests to match new platdata   Walter Lozano
• [PATCH 09/10] dtoc: update dtb_platdata to support cd-gpios   Walter Lozano
• [PATCH 10/10] dtoc add test for cd-gpios   Walter Lozano
• [PATCH 00/10] improve OF_PLATDATA support   Jagan Teki
• [PATCH 05/10] core: extend struct driver_info to point to device   Walter Lozano
• [PATCH 05/10] core: extend struct driver_info to point to device   Simon Glass
• [PATCH] rockchip: rockpro64: Set cooling levels for pwm-fan   Simon Glass
• [PATCH 00/10] improve OF_PLATDATA support   Walter Lozano
• [PATCH 05/10] core: extend struct driver_info to point to device   Walter Lozano
• [PATCH 05/10] core: extend struct driver_info to point to device   Simon Glass
• [PULL u-boot] Please pull u-boot-amlogic-20200529   Tom Rini
• [PATCH v2 0/2] gpio: Add a managed API   Pratyush Yadav
• [PATCH v2 1/2] drivers: gpio: Add a managed API to get a GPIO from the device-tree   Pratyush Yadav
• [PATCH v2 2/2] test: gpio: Add tests for the managed API   Pratyush Yadav
• [RFC PATCH 0/1] gpio: Handle NULL pointers gracefully   Pratyush Yadav
• [RFC PATCH 1/1] gpio: Handle NULL pointers gracefully   Pratyush Yadav
• [PATCH] ARM: imx: ddr: Add missing PHY reset   Marek Vasut
• [PATCHv5][ 1/7] board: tbs2910: disable loadb and loads commands   Denis 'GNUtoo' Carikli
• [PATCHv5][ 2/7] board: tbs2910: disable CONFIG_GZIP   Denis 'GNUtoo' Carikli
• [PATCHv5][ 3/7] board: tbs2910: move CONFIG_BOOTCOMMAND from header to defconfig   Denis 'GNUtoo' Carikli
• [PATCHv5][ 4/7] board: tbs2910_defconfig: Add support for booting general purpose distributions   Denis 'GNUtoo' Carikli
• [PATCHv5][ 5/7] board: tbs2910: remove CONFIG_DHCP   Denis 'GNUtoo' Carikli
• [PATCHv5][ 6/7] board: tbs2910: Enable distro_boot support.   Denis 'GNUtoo' Carikli
• [PATCHv5][ 7/7] board: tbs2910: add documentation   Denis 'GNUtoo' Carikli
• [PATCH 1/2] i2c: designware_i2c: Tidy up use of NULL priv   Heiko Schocher
• [PATCH 2/2] i2c: designware_i2c: Check if the device is powered   Heiko Schocher
• [PATCH v2] misc: i2c_eeprom: implement different probe test eeprom offset   Heiko Schocher
• [PATCH 1/1] i2c: observe scl_count in i2c_deblock_gpio_loop()   Heiko Schocher
• [U-Boot] Please pull from u-boot-i2c   Heiko Schocher
• [PATCH 1/1] efi_loader: function descriptions efi_image_loader.c   Heinrich Schuchardt
• [PATCH 1/1] efi_loader: function description cmp_pe_section()   Heinrich Schuchardt
• [PATCH 1/1] efi_loader: simplify PE consistency check   Heinrich Schuchardt
• [PATCH 03/13] efi_loader: image_loader: retrieve authenticode only if it exists   Heinrich Schuchardt
• [PATCH 04/13] efi_loader: signature: fix a size check against revocation list   Heinrich Schuchardt
• [PATCH 05/13] efi_loader: signature: make efi_hash_regions more generic   Heinrich Schuchardt
• [PATCH 06/13] efi_loader: image_loader: verification for all signatures should pass   Heinrich Schuchardt
• [PATCH 08/13] test/py: efi_secboot: remove all "re.search"   Heinrich Schuchardt
• [PATCH 07/13] efi_loader: image_loader: add digest-based verification for signed image   Heinrich Schuchardt
• [PATCH V2 RESEND 0/7] imx: drivers: ddr: ddr driver update   Peng Fan
• [PATCH V2 1/7] driver: ddr: imx: skip ddr_ss_gpr config on imx8mn   Peng Fan
• [PATCH V2 2/7] driver: ddr: imx: correct the pwrctl setting of selfref_en on imx8m   Peng Fan
• [PATCH V2 3/7] drivers: ddr: imx8mp: Add inline ECC feature support   Peng Fan
• [PATCH] usb: xhci-dwc3: Fix usage of bulk PHY API   Samuel Holland
• [PATCH 1/3] pinctrl: imx7: move soc info to data section   Peng Fan
• [PATCH 2/3] pinctrl: imx8m: move soc info to data section   Peng Fan
• [PATCH 3/3] pinctrl: imx5: move soc info to data section   Peng Fan
• Aw: [PATCH] usb: xhci-dwc3: Fix usage of bulk PHY API   Frank Wunderlich
• test_efi_selftest_test_input_ex test failure   Simon Glass
• [PATCH 04/18] common: Drop net.h from common header   Adam Ford
• Please pull u-boot-dm   Simon Glass
• test_efi_selftest_test_input_ex test failure   Heinrich Schuchardt
• [U-Boot] Please pull from u-boot-i2c   Tom Rini
• test_efi_selftest_test_input_ex test failure   Heinrich Schuchardt
• [PATCH] tbs2910: migrate to DM_VIDEO   Soeren Moch
• [PATCH 1/2] usb: ohci: Add header file for ARCH_DMA_MINALIGN   Simon Glass
• [PATCH 2/2] dma-mapping: Add header file for ARCH_DMA_MINALIGN   Simon Glass
• [PATCH 04/18] common: Drop net.h from common header   Simon Glass
• [PATCH 1/2] usb: ohci: Add header file for ARCH_DMA_MINALIGN   Adam Ford
• [PATCH 04/18] common: Drop net.h from common header   Adam Ford
• test_efi_selftest_test_input_ex test failure   Simon Glass
• [PATCHv5][ 4/7] board: tbs2910_defconfig: Add support for booting general purpose distributions   Soeren Moch
• [PATCHv5][ 5/7] board: tbs2910: remove CONFIG_DHCP   Soeren Moch
• [PATCHv5][ 6/7] board: tbs2910: Enable distro_boot support.   Soeren Moch
• [PATCHv5][ 7/7] board: tbs2910: add documentation   Soeren Moch
• [PATCH 2/2] dma-mapping: Add header file for ARCH_DMA_MINALIGN   Tom Rini
• [PATCH 2/2] dma-mapping: Add header file for ARCH_DMA_MINALIGN   Tom Rini
• [PATCH 1/2] usb: ohci: Add header file for ARCH_DMA_MINALIGN   Tom Rini
• [PATCH 2/2] dma-mapping: Add header file for ARCH_DMA_MINALIGN   Adam Ford
• [PATCH] ARM: imx: hab: panic on authentication failure   Marek Vasut
• [PATCH] ARM: imx: hab: panic on authentication failure   Fabio Estevam
• [PATCH] ARM: imx: hab: panic on authentication failure   Patrick Wildt
• [PATCH] ARM: imx: hab: panic on authentication failure   Marek Vasut
• [PATCH 1/2] ARM: imx: m53menlo: Do not fail boot on invalid splash screen   Marek Vasut
• [PATCH 2/2] ARM: dts: imx: m53menlo: Convert to DM_ETH   Marek Vasut
• [PATCH] ARM: imx: hab: panic on authentication failure   Patrick Wildt
• [PULL] u-boot-usb/master   Marek Vasut
• [PULL] u-boot-sh/master   Marek Vasut
• [PATCH 1/1] Dockerfile: add libguestfs-tools package   Heinrich Schuchardt
• [PATCH 1/1] test/py: use actual core count for parallel builds   Heinrich Schuchardt
• Please pull u-boot-dm   Tom Rini
• Pull request: u-boot-rockchip-20200530   Kever Yang
• [PATCH v3 0/5] rockchip: make it possible to sign the u-boot.itb   Kever Yang
• [PATCH 1/1] doc: move README.log to HTML documentation   Heinrich Schuchardt
• [PATCH 1/1] virtio: VIRTIO_RNG depends on DM_RNG   Heinrich Schuchardt
• [PATCHv4][1/2] rockchip: rk3328: add rock-pi-e dts file   b.l.huang
• [PATCHv4][2/2] rockchip: rk3328: add rock-pi-e-rk3328_defconfig file   b.l.huang
• [PATCH][1/1] README.rockchip: fix typo error   b.l.huang
• [PATCH] sunxi: Add Drejo DS167 board   stulluk at gmail.com
• [PATCH 1/1] sunxi: CONFIG_INIT_SP_RELATIVE=y for Pine64 LTS   Heinrich Schuchardt
• Pull request: u-boot-rockchip-20200530   Peter Robinson
• [PATCH][1/1] README.rockchip: fix typo error   Tom Rini
• [PATCH v2 1/2] rockchip: spl: do full dram_init instead of only probing   Kever Yang
• [PATCH 1/1] log: clean up Kconfig   Heinrich Schuchardt
• [PATCH v2 1/2] rockchip: spl: do full dram_init instead of only probing   Kever Yang
• Pull request: u-boot-rockchip-20200530   Kever Yang
• [PATCHv4][1/2] rockchip: rk3328: add rock-pi-e dts file   Kever Yang
• [PATCHv4][2/2] rockchip: rk3328: add rock-pi-e-rk3328_defconfig file   Kever Yang
• [PATCH 1/1] log: check argument of 'log level' command   Heinrich Schuchardt
• [PATCHv4][2/2] rockchip: rk3328: add rock-pi-e-rk3328_defconfig file   Kever Yang
• [PATCHv4][2/2] rockchip: rk3328: add rock-pi-e-rk3328_defconfig file   Kever Yang
• [PULL] u-boot-usb/master   Tom Rini
• [PULL] u-boot-sh/master   Tom Rini
• [PATCH 8/9] spi: Zap SOFT_SPI (non-dm)   Simon Glass
• [PATCH 9/9] doc: driver-model: Update SPI migration status   Simon Glass
• [PATCH v3 0/3] cmd: add driver, fs and part type listing commands   Simon Glass
• [PATCH v2 06/10] rtc: add rtc command   Simon Glass
• [PATCH v2 07/10] rtc: sandbox-rtc: fix set method   Simon Glass
• [PATCH v2 08/10] rtc: i2c_rtc_emul: catch any write to the "reset" register   Simon Glass
• [PATCH v2 09/10] test: dm: rtc: add test of rtc_read, rtc_write   Simon Glass
• [PATCH v2 10/10] test: dm: rtc: add tests of rtc shell command   Simon Glass
• [PATCH v3 2/5] mkimage: fit_image: handle multiple errors when writing signatures   Simon Glass
• [PATCH v3 3/5] spl: fit: enable signing a generated u-boot.itb   Simon Glass
• [PATCH v3 5/5] rockchip: make_fit_atf: add signature handling   Simon Glass
• [PATCH v2] i2c: octeon_i2c: Add I2C controller driver for Octeon   Simon Glass
• [PATCH v2] gpio: octeon_gpio: Add GPIO controller driver for Octeon   Simon Glass
• [PATCH v1 2/3] x86: acpi: Replace _ADR() by _UID() in description of PCI host bridge   Simon Glass
• [PATCH v1 3/3] x86: acpi: Drop _ADR() where _HID() is present   Simon Glass
• [PATCHv2 4/8] rockchip: Remove ARCH= references from documentation   Simon Glass
• [PATCH 1/1] fs: fat_write: fix short name creation.   Simon Glass
• [PATCH v2] doc: log: correct option name CONFIG_LOG_MAX_LEVEL   Simon Glass
• [PATCH 2/4] trace: clang compatible handling of gd register   Simon Glass
• [PATCH 1/4] efi_loader: allow compiling with clang   Simon Glass
• [PATCH 3/4] arm: remove outdated comment concerning -ffixed-x18   Simon Glass
• [U-boot,1/2] eth: mtk-eth: enable mt7629 sgmii mode support in mediatek eth driver   Simon Glass
• [PATCH 1/1] test/py: use actual core count for parallel builds   Simon Glass
• [PATCH v3 1/4] spl: fix format of function documentation   Simon Glass
• [PATCH v3 2/4] spl: fit: fail fit loading in case of FDT appending error   Simon Glass
• [PATCH v3 4/4] spl: fit: improve spl_nand_fit_read(...) readability   Simon Glass
• [PATCH 2/8] regmap: zero out the regmap on allocation   Simon Glass
• [PATCH 3/8] regmap: Allow specifying read/write width   Simon Glass
• [PATCH 4/8] regmap: Allow left shifting register offset before access   Simon Glass
• [PATCH 5/8] regmap: Add regmap_init_mem_range()   Simon Glass
• [PATCH 6/8] regmap: Allow devices to specify regmap range start and size in config   Simon Glass
• [PATCH 7/8] regmap: Add support for regmap fields   Simon Glass
• [PATCH 8/8] test: dm: Add tests for regmap managed API and regmap fields   Simon Glass
• [PATCH v1 1/3] drivers: reset: Handle gracefully NULL pointers   Simon Glass
• [PATCH v2 0/2] gpio: Add a managed API   Simon Glass
• [PATCH 2/2] dma-mapping: Add header file for ARCH_DMA_MINALIGN   Simon Glass
• [PATCH 1/1] log: don't show function by default   Heinrich Schuchardt
• [PATCH v2 1/1] log: don't show function by default   Heinrich Schuchardt
• Fwd: [PATCH 1/1] sunxi: CONFIG_INIT_SP_RELATIVE=y for Pine64 LTS   Heinrich Schuchardt
• printk   Heinrich Schuchardt
• [PATCH v2] drivers: crypto: mod_exp_sw: Re-add DM_FLAG_PRE_RELOC   Heinrich Schuchardt
• [PATCH] ARM: imx: hab: panic on authentication failure   Marek Vasut
• Pull request: u-boot-rockchip-20200530   Kever Yang
• [PATCH] ARM: imx: hab: panic on authentication failure   Patrick Wildt
• [PATCHv5][1/2] rockchip: rk3328: add rock-pi-e dts file   b.l.huang
• [PATCHv5][2/2] rockchip: rk3328: add rock-pi-e-rk3328_defconfig file   b.l.huang
• Pull request: u-boot-rockchip-20200530   Tom Rini
• printk   Simon Glass
• [PATCH 1/1] log: clean up Kconfig   Simon Glass
• [PATCH 1/1] log: check argument of 'log level' command   Simon Glass
• [PATCH 1/1] virtio: VIRTIO_RNG depends on DM_RNG   Simon Glass
• [PATCH 1/1] doc: move README.log to HTML documentation   Simon Glass
• [PATCH] ARM: imx: hab: panic on authentication failure   Marek Vasut
• [PATCH] ARM: imx: hab: panic on authentication failure   Patrick Wildt
• [PATCH v3] spl: allow board_spl_fit_post_load() to fail   Patrick Wildt
• [PATCH v3] spl: allow board_spl_fit_post_load() to fail   Marek Vasut
• [PATCH 1/1] test/py: use actual core count for parallel builds   Stephen Warren
• [PATCH 1/1] efi_loader: validate load option   Heinrich Schuchardt