[PATCH v3 6/7] ARM: dts: rk3399-evb: usb3.0 host support

[Frank Wang]

Hi Peter,

On 2020/5/7 16:17, Peter Robinson wrote:
> On Thu, May 7, 2020 at 9:13 AM Frank Wang <frank.wang at rock-chips.com> wrote:
>> Configure 'tcphy1' and 'usbdrd_dwc3_1' nodes to support USB3.0 host
>> for Rockchip RK3399 Evaluation Board.
>>
>> Signed-off-by: Frank Wang <frank.wang at rock-chips.com>
>> ---
>> Changes for v3:
>> - drop dtsi changes to keep the same with Linux Kernel.
>> - amend rk3399-evb.dts to support usb3.0 host.
> If this is specific to U-Boot it should go in
> arch/arm/dts/rk3399-evb-u-boot.dtsi as the rk3399-evb.dts is intended
> to be the same as what's in Linux.

Will fix.

>>   arch/arm/dts/rk3399-evb.dts | 13 +++++++++++++
>>   1 file changed, 13 insertions(+)
>>
>> diff --git a/arch/arm/dts/rk3399-evb.dts b/arch/arm/dts/rk3399-evb.dts
>> index 694b0d08d6..5aa46f4e37 100644
>> --- a/arch/arm/dts/rk3399-evb.dts
>> +++ b/arch/arm/dts/rk3399-evb.dts
>> @@ -417,6 +417,10 @@
>>          status = "disabled";
>>   };
>>
>> +&tcphy1 {
>> +       status = "okay";
>> +};
>> +
>>   &u2phy0 {
>>          status = "okay";
>>   };
>> @@ -439,6 +443,15 @@
>>          status = "okay";
>>   };
>>
>> +&usbdrd3_1 {
>> +       status = "okay";
>> +};
>> +
>> +&usbdrd_dwc3_1 {
>> +       dr_mode = "host";
>> +       status = "okay";
>> +};
>> +
>>   &usb_host0_ehci {
>>          status = "okay";
>>   };
>> --
>> 2.17.1
>>
>>
>>
>