[PATCH 6/7] mmc: zynq_sdhci: Add clock phase delays for Versal
Michal Simek
michal.simek at xilinx.com
Fri May 22 12:44:10 CEST 2020
From: Ashok Reddy Soma <ashok.reddy.soma at xilinx.com>
Define default values for input and output clock phase delays for
Versal. Also define functions for setting tapdelays based on these
clock phase delays.
Signed-off-by: Ashok Reddy Soma <ashok.reddy.soma at xilinx.com>
Signed-off-by: Michal Simek <michal.simek at xilinx.com>
---
drivers/mmc/zynq_sdhci.c | 160 ++++++++++++++++++++++++++++++++++++++-
1 file changed, 156 insertions(+), 4 deletions(-)
diff --git a/drivers/mmc/zynq_sdhci.c b/drivers/mmc/zynq_sdhci.c
index 1e7b79906f88..91ec552119d1 100644
--- a/drivers/mmc/zynq_sdhci.c
+++ b/drivers/mmc/zynq_sdhci.c
@@ -19,6 +19,12 @@
#include <sdhci.h>
#include <zynqmp_tap_delay.h>
+#define SDHCI_ARASAN_ITAPDLY_REGISTER 0xF0F8
+#define SDHCI_ARASAN_OTAPDLY_REGISTER 0xF0FC
+#define SDHCI_ITAPDLY_CHGWIN 0x200
+#define SDHCI_ITAPDLY_ENABLE 0x100
+#define SDHCI_OTAPDLY_ENABLE 0x40
+
#define SDHCI_TUNING_LOOP_COUNT 40
#define MMC_BANK2 0x2
@@ -40,11 +46,15 @@ struct arasan_sdhci_priv {
u8 no_1p8;
};
-#if defined(CONFIG_ARCH_ZYNQMP)
+#if defined(CONFIG_ARCH_ZYNQMP) || defined(CONFIG_ARCH_VERSAL)
/* Default settings for ZynqMP Clock Phases */
const u32 zynqmp_iclk_phases[] = {0, 63, 63, 0, 63, 0, 0, 183, 54, 0, 0};
const u32 zynqmp_oclk_phases[] = {0, 72, 60, 0, 60, 72, 135, 48, 72, 135, 0};
+/* Default settings for Versal Clock Phases */
+const u32 versal_iclk_phases[] = {0, 132, 132, 0, 132, 0, 0, 162, 90, 0, 0};
+const u32 versal_oclk_phases[] = {0, 60, 48, 0, 48, 72, 90, 36, 60, 90, 0};
+
static const u8 mode2timing[] = {
[MMC_LEGACY] = MMC_TIMING_LEGACY,
[MMC_HS] = MMC_TIMING_MMC_HS,
@@ -278,6 +288,138 @@ static int sdhci_zynqmp_sampleclk_set_phase(struct sdhci_host *host,
return ret;
}
+/**
+ * sdhci_versal_sdcardclk_set_phase - Set the SD Output Clock Tap Delays
+ *
+ * Set the SD Output Clock Tap Delays for Output path
+ *
+ * @host: Pointer to the sdhci_host structure.
+ * @degrees: The clock phase shift between 0 - 359.
+ * Return: 0 on success and error value on error
+ */
+static int sdhci_versal_sdcardclk_set_phase(struct sdhci_host *host,
+ int degrees)
+{
+ struct mmc *mmc = (struct mmc *)host->mmc;
+ u8 tap_delay, tap_max = 0;
+ int ret;
+ int timing = mode2timing[mmc->selected_mode];
+
+ /*
+ * This is applicable for SDHCI_SPEC_300 and above
+ * Versal does not set phase for <=25MHz clock.
+ * If degrees is zero, no need to do anything.
+ */
+ if (host->version < SDHCI_SPEC_300 ||
+ timing == MMC_TIMING_LEGACY ||
+ timing == MMC_TIMING_UHS_SDR12 || !degrees)
+ return 0;
+
+ switch (timing) {
+ case MMC_TIMING_MMC_HS:
+ case MMC_TIMING_SD_HS:
+ case MMC_TIMING_UHS_SDR25:
+ case MMC_TIMING_UHS_DDR50:
+ case MMC_TIMING_MMC_DDR52:
+ /* For 50MHz clock, 30 Taps are available */
+ tap_max = 30;
+ break;
+ case MMC_TIMING_UHS_SDR50:
+ /* For 100MHz clock, 15 Taps are available */
+ tap_max = 15;
+ break;
+ case MMC_TIMING_UHS_SDR104:
+ case MMC_TIMING_MMC_HS200:
+ /* For 200MHz clock, 8 Taps are available */
+ tap_max = 8;
+ default:
+ break;
+ }
+
+ tap_delay = (degrees * tap_max) / 360;
+
+ /* Set the Clock Phase */
+ if (tap_delay) {
+ u32 regval;
+
+ regval = sdhci_readl(host, SDHCI_ARASAN_OTAPDLY_REGISTER);
+ regval |= SDHCI_OTAPDLY_ENABLE;
+ sdhci_writel(host, regval, SDHCI_ARASAN_OTAPDLY_REGISTER);
+ regval |= tap_delay;
+ sdhci_writel(host, regval, SDHCI_ARASAN_OTAPDLY_REGISTER);
+ }
+
+ return ret;
+}
+
+/**
+ * sdhci_versal_sampleclk_set_phase - Set the SD Input Clock Tap Delays
+ *
+ * Set the SD Input Clock Tap Delays for Input path
+ *
+ * @host: Pointer to the sdhci_host structure.
+ * @degrees: The clock phase shift between 0 - 359.
+ * Return: 0 on success and error value on error
+ */
+static int sdhci_versal_sampleclk_set_phase(struct sdhci_host *host,
+ int degrees)
+{
+ struct mmc *mmc = (struct mmc *)host->mmc;
+ u8 tap_delay, tap_max = 0;
+ int ret;
+ int timing = mode2timing[mmc->selected_mode];
+
+ /*
+ * This is applicable for SDHCI_SPEC_300 and above
+ * Versal does not set phase for <=25MHz clock.
+ * If degrees is zero, no need to do anything.
+ */
+ if (host->version < SDHCI_SPEC_300 ||
+ timing == MMC_TIMING_LEGACY ||
+ timing == MMC_TIMING_UHS_SDR12 || !degrees)
+ return 0;
+
+ switch (timing) {
+ case MMC_TIMING_MMC_HS:
+ case MMC_TIMING_SD_HS:
+ case MMC_TIMING_UHS_SDR25:
+ case MMC_TIMING_UHS_DDR50:
+ case MMC_TIMING_MMC_DDR52:
+ /* For 50MHz clock, 120 Taps are available */
+ tap_max = 120;
+ break;
+ case MMC_TIMING_UHS_SDR50:
+ /* For 100MHz clock, 60 Taps are available */
+ tap_max = 60;
+ break;
+ case MMC_TIMING_UHS_SDR104:
+ case MMC_TIMING_MMC_HS200:
+ /* For 200MHz clock, 30 Taps are available */
+ tap_max = 30;
+ default:
+ break;
+ }
+
+ tap_delay = (degrees * tap_max) / 360;
+
+ /* Set the Clock Phase */
+ if (tap_delay) {
+ u32 regval;
+
+ regval = sdhci_readl(host, SDHCI_ARASAN_ITAPDLY_REGISTER);
+ regval |= SDHCI_ITAPDLY_CHGWIN;
+ sdhci_writel(host, regval, SDHCI_ARASAN_ITAPDLY_REGISTER);
+ regval |= SDHCI_ITAPDLY_ENABLE;
+ sdhci_writel(host, regval, SDHCI_ARASAN_ITAPDLY_REGISTER);
+ regval |= tap_delay;
+ sdhci_writel(host, regval, SDHCI_ARASAN_ITAPDLY_REGISTER);
+ regval &= ~SDHCI_ITAPDLY_CHGWIN;
+ sdhci_writel(host, regval, SDHCI_ARASAN_ITAPDLY_REGISTER);
+ }
+
+ return ret;
+}
+
static void arasan_sdhci_set_tapdelay(struct sdhci_host *host)
{
struct arasan_sdhci_priv *priv = dev_get_priv(host->mmc->dev);
@@ -294,6 +436,10 @@ static void arasan_sdhci_set_tapdelay(struct sdhci_host *host)
device_is_compatible(dev, "xlnx,zynqmp-8.9a")) {
sdhci_zynqmp_sampleclk_set_phase(host, iclk_phase);
sdhci_zynqmp_sdcardclk_set_phase(host, oclk_phase);
+ } else if (IS_ENABLED(CONFIG_ARCH_VERSAL) &&
+ device_is_compatible(dev, "xlnx,versal-8.9a")) {
+ sdhci_versal_sampleclk_set_phase(host, iclk_phase);
+ sdhci_versal_sdcardclk_set_phase(host, oclk_phase);
}
}
@@ -346,6 +492,14 @@ static void arasan_dt_parse_clk_phases(struct udevice *dev)
}
}
+ if (IS_ENABLED(CONFIG_ARCH_VERSAL) &&
+ device_is_compatible(dev, "xlnx,versal-8.9a")) {
+ for (i = 0; i <= MMC_TIMING_MMC_HS400; i++) {
+ clk_data->clk_phase_in[i] = versal_iclk_phases[i];
+ clk_data->clk_phase_out[i] = versal_oclk_phases[i];
+ }
+ }
+
arasan_dt_read_clk_phase(dev, MMC_TIMING_LEGACY,
"clk-phase-legacy");
arasan_dt_read_clk_phase(dev, MMC_TIMING_MMC_HS,
@@ -388,9 +542,7 @@ static void arasan_sdhci_set_control_reg(struct sdhci_host *host)
mmc->selected_mode <= UHS_DDR50)
sdhci_set_uhs_timing(host);
}
-#endif
-#if defined(CONFIG_ARCH_ZYNQMP)
const struct sdhci_ops arasan_ops = {
.platform_execute_tuning = &arasan_sdhci_execute_tuning,
.set_delay = &arasan_sdhci_set_tapdelay,
@@ -471,7 +623,7 @@ static int arasan_sdhci_ofdata_to_platdata(struct udevice *dev)
priv->host->name = dev->name;
-#if defined(CONFIG_ARCH_ZYNQMP)
+#if defined(CONFIG_ARCH_ZYNQMP) || defined(CONFIG_ARCH_VERSAL)
priv->host->ops = &arasan_ops;
arasan_dt_parse_clk_phases(dev);
#endif
--
2.26.2
More information about the U-Boot
mailing list