[PATCH V3 6/6] ARM: stm32: Implement DDR3 coding on DHCOR SoM

[Patrick DELAUNAY]

Hi,

> From: Marek Vasut <marex at denx.de>
> Sent: mercredi 22 avril 2020 13:18
> 
> The DHCOR board does exist in multiple variants with different DDR3 DRAM sizes.
> To cater for all of them, implement DDR3 code handling.
> There are two GPIOs which code the DRAM size populated on the SoM, read them
> out and use the value to pick the correct DDR3 config.
> 
> Reviewed-by: Patrick Delaunay <patrick.delaunay at st.com>
> Signed-off-by: Marek Vasut <marex at denx.de>
> Cc: Manivannan Sadhasivam <manivannan.sadhasivam at linaro.org>
> Cc: Patrick Delaunay <patrick.delaunay at st.com>
> Cc: Patrice Chotard <patrice.chotard at st.com>
> ---
> V2: Match on compatible string
> V3: Add RB from Patrick
> ---
>  arch/arm/dts/stm32mp15xx-dhcom-u-boot.dtsi |  2 ++
> arch/arm/dts/stm32mp15xx-dhcor-u-boot.dtsi |  2 ++
>  board/dhelectronics/dh_stm32mp1/board.c    | 26 +++++++++++++++++++++-
>  configs/stm32mp15_dhcom_basic_defconfig    |  1 +
>  configs/stm32mp15_dhcor_basic_defconfig    |  1 +
>  5 files changed, 31 insertions(+), 1 deletion(-)
> 

Applied to u-boot-stm/master, thanks!

Regards

Patrick