raspberrypi cm3 v2019.07 not working

[Matthias Brugger]

On 12/05/2020 13:00, Belisko Marek wrote:
> On Tue, May 12, 2020 at 12:51 PM Matthias Brugger <mbrugger at suse.com> wrote:
>>
>>
>>
>> On 12/05/2020 11:15, Belisko Marek wrote:
>>> On Fri, May 8, 2020 at 11:39 PM Belisko Marek <marek.belisko at gmail.com> wrote:
>>>>
>>>> Hi Matthias,
>>>>
>>>> On Fri, May 8, 2020 at 11:28 PM Matthias Brugger <mbrugger at suse.com> wrote:
>>>>>
>>>>> Hi Marek,
>>>>>
>>>>> On 08/05/2020 21:52, Belisko Marek wrote:
>>>>>> On Wed, May 6, 2020 at 11:02 PM Belisko Marek <marek.belisko at gmail.com> wrote:
>>>>>>>
>>>>>>> On Tue, May 5, 2020 at 10:18 PM Belisko Marek <marek.belisko at gmail.com> wrote:
>>>>>>>>
>>>>>>>> Hi,
>>>>>>>>
>>>>>>>> I'm trying to run 2019.07 u-boot on raspberrypi cm3 module but I got
>>>>>>>> no feedback on console. When used 2018.01 it boots fine. Probably I
>>>>>>>> need to do git bisect but maybe someone have some idea or experience
>>>>>>>> what can cause that. Thanks.
>>>>>>> I give a try 2020.01 and I got only this:
>>>>>>> U-Boot 2020.01 (May 06 2020 - 20:09:45 +0000)
>>>>>>>
>>>>>>> DRAM:  948 MiB
>>>>>>> RPI Compute Module 3 (0xa020a0)
>>>>>>>
>>>>>>> I'll try to debug it and let you know.
>>>>>> Debug messages shows this:
>>>>>> https://pastebin.com/2SwNzrb1
>>>>>>
>>>>>> I tried to debug but I have no clue what is going one there.
>>>>>>
>>>>>> Also u-boot 2019.07 is not working at all on cm3 due to this commit
>>>>>> (after bisect when reverted u-boot start working again):
>>>>>> 143256b353c4d2ad1cf5e5e63b38410188b35e49 - fdt: update bcm283x device
>>>>>> tree sources to Linux 5.1-rc6 state
>>>>>>
>>>>>> Any ideas hint how to resolve this issue? Thanks.
>>>>>>
>>>>>
>>>>> Can you try to cherry-pick the following two patches to your tree:
>>>>> 5051377a0b ("arm: dts: bcm283x: Rename U-Boot file")
>>>>> 89e47e8eb6 ("fdt: fix bcm283x dm-pre-reloc definitions")
>>>> But those are present in 2020.01 and this version at least print
>>>> something to console but stuck somewhere (pls see pastebin log with
>>>> debug enabled)
>>>> I prefer to run 2020.01 ;). Thanks.
>>> Any other stuff I can try to make it working in 2020.01? Could that be
>>> firmware issue somehow? Thanks.
>>
>> Sorry I didn't realized that your first try was with 2020.01.
>> I just confirmed that it acutually does not boot. As a shortcut, do you know
>> which is the last working version of U-Boot?
> v2019.07 with reverted  commit :
> 143256b353c4d2ad1cf5e5e63b38410188b35e49 - fdt: update bcm283x device
> tree sources to Linux 5.1-rc6 state
> work fine. Without revert it shows anything on console. So something
> between 2019.07..2020.01 mus fix it partially ;)

I just tired v2020.04 and it works for me. Would you mind testing that on your end?

Do you have a hard dependency on v2020.01?

Regards,
Matthias