[PATCH v10 17/18] configs: fu540: Add config options for U-Boot SPL
Pragnesh Patel
pragnesh.patel at sifive.com
Wed May 20 15:33:30 CEST 2020
Hi Jagan,
>-----Original Message-----
>From: U-Boot <u-boot-bounces at lists.denx.de> On Behalf Of Pragnesh Patel
>Sent: 20 May 2020 12:55
>To: Bin Meng <bmeng.cn at gmail.com>; Jagan Teki
><jagan at amarulasolutions.com>
>Cc: U-Boot-Denx <u-boot at lists.denx.de>; Atish Patra
><atish.patra at wdc.com>; Palmer Dabbelt <palmerdabbelt at google.com>; Paul
>Walmsley <paul.walmsley at sifive.com>; Anup Patel <anup.patel at wdc.com>;
>Sagar Kadam <sagar.kadam at sifive.com>; Rick Chen <rick at andestech.com>;
>Palmer Dabbelt <palmer at dabbelt.com>
>Subject: RE: [PATCH v10 17/18] configs: fu540: Add config options for U-Boot
>SPL
>
>Hi Jagan,
>
>>-----Original Message-----
>>From: Bin Meng <bmeng.cn at gmail.com>
>>Sent: 20 May 2020 10:07
>>To: Jagan Teki <jagan at amarulasolutions.com>
>>Cc: Pragnesh Patel <pragnesh.patel at sifive.com>; U-Boot-Denx <u-
>>boot at lists.denx.de>; Atish Patra <atish.patra at wdc.com>; Palmer Dabbelt
>><palmerdabbelt at google.com>; Paul Walmsley
><paul.walmsley at sifive.com>;
>>Anup Patel <anup.patel at wdc.com>; Sagar Kadam
><sagar.kadam at sifive.com>;
>>Rick Chen <rick at andestech.com>; Palmer Dabbelt <palmer at dabbelt.com>
>>Subject: Re: [PATCH v10 17/18] configs: fu540: Add config options for
>>U-Boot SPL
>>
>>[External Email] Do not click links or attachments unless you recognize
>>the sender and know the content is safe
>>
>>Hi Jagan,
>>
>>On Wed, May 20, 2020 at 12:11 AM Jagan Teki
>><jagan at amarulasolutions.com>
>>wrote:
>>>
>>> On Sat, May 16, 2020 at 11:42 AM Pragnesh Patel
>>> <pragnesh.patel at sifive.com> wrote:
>>> >
>>> > Hi Jagan,
>>> >
>>> > >-----Original Message-----
>>> > >From: Jagan Teki <jagan at amarulasolutions.com>
>>> > >Sent: 15 May 2020 23:05
>>> > >To: Pragnesh Patel <pragnesh.patel at sifive.com>
>>> > >Cc: U-Boot-Denx <u-boot at lists.denx.de>; Atish Patra
>>> > ><atish.patra at wdc.com>; Palmer Dabbelt
>><palmerdabbelt at google.com>;
>>> > >Bin Meng <bmeng.cn at gmail.com>; Paul Walmsley
>>> > ><paul.walmsley at sifive.com>; Anup Patel <anup.patel at wdc.com>;
>Sagar
>>> > >Kadam <sagar.kadam at sifive.com>; Rick Chen <rick at andestech.com>;
>>> > >Palmer Dabbelt <palmer at dabbelt.com>
>>> > >Subject: Re: [PATCH v10 17/18] configs: fu540: Add config options
>>> > >for U-Boot SPL
>>> > >
>>> > >[External Email] Do not click links or attachments unless you
>>> > >recognize the sender and know the content is safe
>>> > >
>>> > >On Thu, May 14, 2020 at 5:24 PM Pragnesh Patel
>>> > ><pragnesh.patel at sifive.com> wrote:
>>> > >>
>>> > >> With sifive_fu540_defconfig:
>>> > >>
>>> > >> User can use FSBL or u-boot-spl.bin anyone at a time.
>>> > >>
>>> > >> For FSBL,
>>> > >> fsbl->fw_payload.bin (opensbi + U-Boot)
>>> > >>
>>> > >> For u-boot-spl.bin,
>>> > >> u-boot-spl.bin->FIT image (opensbi + U-Boot proper + dtb)
>>> > >>
>>> > >> U-Boot SPL will be loaded by ZSBL from SD card (replace fsbl.bin
>>> > >> with
>>> > >> u-boot-spl.bin) and runs in L2 LIM in machine mode and then load
>>> > >> FIT image u-boot.itb from SD card into RAM.
>>> > >>
>>> > >> U-Boot SPL expects u-boot.itb FIT image at the starting of SD
>>> > >> card sector number (0x822) of GUID type
>>> > >> "2E54B353-1271-4842-806F-
>>> > >E436D6AF6985"
>>> > >>
>>> > >> Signed-off-by: Pragnesh Patel <pragnesh.patel at sifive.com>
>>> > >> Signed-off-by: Jagan Teki <jagan at amarulasolutions.com>
>>> > >> Reviewed-by: Jagan Teki <jagan at amarulasolutions.com>
>>> > >> ---
>>> > >> configs/sifive_fu540_defconfig | 8 ++
>>> > >> doc/board/sifive/fu540.rst | 134
>>+++++++++++++++++++++++++++++++++
>>> > >> 2 files changed, 142 insertions(+)
>>> > >>
>>> > >> diff --git a/configs/sifive_fu540_defconfig
>>> > >> b/configs/sifive_fu540_defconfig index f805aacc7a..8d412f8d6a
>>> > >> 100644
>>> > >> --- a/configs/sifive_fu540_defconfig
>>> > >> +++ b/configs/sifive_fu540_defconfig
>>> > >> @@ -1,6 +1,11 @@
>>> > >> CONFIG_RISCV=y
>>> > >> +CONFIG_SPL_GPIO_SUPPORT=y
>>> > >> +CONFIG_SYS_MALLOC_F_LEN=0x3000
>>> > >> CONFIG_ENV_SIZE=0x20000
>>> > >> +CONFIG_SPL_MMC_SUPPORT=y
>>> > >> CONFIG_NR_DRAM_BANKS=1
>>> > >> +CONFIG_SPL=y
>>> > >> +CONFIG_SPL_SPI_SUPPORT=y
>>> > >> CONFIG_TARGET_SIFIVE_FU540=y
>>> > >> CONFIG_ARCH_RV64I=y
>>> > >> CONFIG_RISCV_SMODE=y
>>> > >> @@ -9,7 +14,10 @@ CONFIG_FIT=y
>>> > >> CONFIG_MISC_INIT_R=y
>>> > >> CONFIG_DISPLAY_CPUINFO=y
>>> > >> CONFIG_DISPLAY_BOARDINFO=y
>>> > >> +CONFIG_SPL_SEPARATE_BSS=y
>>> > >> +CONFIG_SPL_YMODEM_SUPPORT=y
>>> > >> CONFIG_OF_BOARD_FIXUP=y
>>> > >> CONFIG_DEFAULT_DEVICE_TREE="hifive-unleashed-a00"
>>> > >> CONFIG_SYS_RELOC_GD_ENV_ADDR=y
>>> > >> +CONFIG_SPL_CLK=y
>>> > >> CONFIG_DM_MTD=y
>>> > >> diff --git a/doc/board/sifive/fu540.rst
>>> > >> b/doc/board/sifive/fu540.rst index 610ba87074..89e8d66c56 100644
>>> > >> --- a/doc/board/sifive/fu540.rst
>>> > >> +++ b/doc/board/sifive/fu540.rst
>>> > >> @@ -31,6 +31,9 @@ TODO:
>>> > >> stdout-path = "/soc/serial at 10010000:115200";
>>> > >> };
>>> > >>
>>> > >> +Booting from MMC using FSBL
>>> > >> +---------------------------
>>> > >> +
>>> > >> Building
>>> > >> --------
>>> > >>
>>> > >> @@ -421,3 +424,134 @@ as well.
>>> > >>
>>> > >> Please press Enter to activate this console.
>>> > >> / #
>>> > >> +
>>> > >> +Booting from MMC using U-Boot SPL
>>> > >> +---------------------------------
>>> > >> +
>>> > >> +Building
>>> > >> +--------
>>> > >> +
>>> > >> +Before building U-Boot SPL, OpenSBI must be built first.
>>> > >> +OpenSBI can be cloned and built for FU540 as below:
>>> > >> +
>>> > >> +.. code-block:: console
>>> > >> +
>>> > >> + git clone https://github.com/riscv/opensbi.git
>>> > >> + cd opensbi
>>> > >> + make PLATFORM=generic FW_DYNAMIC=y
>>> > >> +
>>> > >> +Copy OpenSBI FW_DYNAMIC image
>>> > >> +(build/platform/generic/firmware/fw_dynamic.bin) into U-Boot
>>> > >> +root directory
>>> > >> +
>>> > >> +.. code-block:: console
>>> > >> +
>>> > >> + cp build/platform/generic/firmware/fw_dynamic.bin
>>> > >> + <u-boot-dir>
>>> > >> +
>>> > >> +Now build the U-Boot SPL and U-Boot proper
>>> > >> +
>>> > >> +.. code-block:: console
>>> > >> +
>>> > >> + cd <U-Boot-dir>
>>> > >> + make sifive_fu540_defconfig
>>> > >> + make
>>> > >> +
>>> > >> +This will generate spl/u-boot-spl.bin and FIT image
>>> > >> +(u-boot.itb)
>>> > >> +
>>> > >> +
>>> > >> +Flashing
>>> > >> +--------
>>> > >> +
>>> > >> +ZSBL loads the U-Boot SPL (u-boot-spl.bin) from a partition
>>> > >> +with GUID type
>>> > >> +5B193300-FC78-40CD-8002-E86C45580B47
>>> > >> +
>>> > >> +U-Boot SPL expects a U-Boot FIT image (u-boot.itb) from a
>>> > >> +partition with GUID type 2E54B353-1271-4842-806F-E436D6AF6985
>>> > >> +
>>> > >> +FIT image (u-boot.itb) is a combination of fw_dynamic.bin,
>>> > >> +u-boot-nodtb.bin and device tree blob
>>> > >> +(hifive-unleashed-a00.dtb)
>>> > >> +
>>> > >> +Format the SD card (make sure the disk has GPT, otherwise use
>>> > >> +gdisk to switch)
>>> > >> +
>>> > >> +.. code-block:: none
>>> > >> +
>>> > >> + # sudo sgdisk --clear \
>>> > >> + > --set-alignment=2 \
>>> > >> + > --new=1:34:2081 --change-name=1:loader1
>>> > >> + --typecode=1:5B193300-
>>> > >FC78-40CD-8002-E86C45580B47 \
>>> > >> + > --new=2:2082:10273 --change-name=2:loader2 --
>>> > >typecode=2:2E54B353-1271-4842-806F-E436D6AF6985 \
>>> > >> + > --new=3:10274: --change-name=3:rootfs
>>> > >> + --typecode=3:0FC63DAF-
>>> > >8483-4772-8E79-3D69D8477DE4 \
>>> > >> + > /dev/sda
>>> > >> +
>>> > >> +Program the SD card
>>> > >> +
>>> > >> +.. code-block:: none
>>> > >> +
>>> > >> + sudo dd if=spl/u-boot-spl.bin of=/dev/sda seek=34
>>> > >> + sudo dd if=u-boot.itb of=/dev/sda seek=2082
>>> > >> +
>>> > >> +Booting
>>> > >> +-------
>>> > >> +Once you plugin the sdcard and power up, you should see the
>>> > >> +U-Boot
>>> > >prompt.
>>> > >> +
>>> > >> +Sample boot log from HiFive Unleashed board
>>> > >> +-------------------------------------------
>>> > >> +
>>> > >> +.. code-block:: none
>>> > >> +
>>> > >> + U-Boot SPL 2020.04-rc2-00109-g63efc7e07e-dirty (Apr 30
>>> > >> + 2020 -
>>> > >13:52:36 +0530)
>>> > >> + Trying to boot from MMC1
>>> > >> +
>>> > >> +
>>> > >> + U-Boot 2020.04-rc2-00109-g63efc7e07e-dirty (Apr 30 2020
>>> > >> + -
>>> > >> + 13:52:36 +0530)
>>> > >> +
>>> > >> + CPU: rv64imafdc
>>> > >> + Model: SiFive HiFive Unleashed A00
>>> > >> + DRAM: 8 GiB
>>> > >> + MMC: spi at 10050000:mmc at 0: 0
>>> > >> + In: serial at 10010000
>>> > >> + Out: serial at 10010000
>>> > >> + Err: serial at 10010000
>>> > >> + Board serial number should not be 0 !!
>>> > >> + Net:
>>> > >> + Warning: ethernet at 10090000 (eth0) using random MAC
>>> > >> + address -
>>> > >96:06:92:18:eb:04
>>> > >> + eth0: ethernet at 10090000
>>> > >> + Hit any key to stop autoboot: 0
>>> > >
>>> > >Look like v10 seems to be a change, I can see memory region print?
>>> > >
>>> > >U-Boot SPL 2020.07-rc1-00540-gd06cdf6989 (May 15 2020 - 23:00:17
>>> > >+0530)
>>> > >Trying to boot from MMC1
>>> > >
>>> > >
>>> > >U-Boot 2020.07-rc1-00540-gd06cdf6989 (May 15 2020 - 23:00:17
>>> > >+0530)
>>> > >
>>> > >CPU: rv64imafdc
>>> > >Model: SiFive HiFive Unleashed A00
>>> > >DRAM: 8 GiB
>>> > >No reserved memory region found in source FDT
>>> > >MMC: spi at 10050000:mmc at 0: 0
>>> > >In: serial at 10010000
>>> > >Out: serial at 10010000
>>> > >Err: serial at 10010000
>>> > >Net: eth0: ethernet at 10090000
>>> > >Hit any key to stop autoboot: 0
>>> >
>>> > I haven't got this "memory region" print, can you please update
>>> > your U-Boot and OpenSBI Repo and recheck.
>>>
>>> I have checked with latest opensbi, still got it.
>>
>>Do you mean this message?
>>
>> No reserved memory region found in source FDT
>>
>>If yes, you need use OpenSBI v0.7.
>>
>>>
>>> U-Boot SPL 2020.07-rc2-00154-gb37b258d49-dirty (May 19 2020 -
>>> 21:33:36
>>> +0530) Trying to boot from MMC1
>>>
>>> OpenSBI v0.6
>>> ____ _____ ____ _____
>>> / __ \ / ____| _ \_ _|
>>> | | | |_ __ ___ _ __ | (___ | |_) || |
>>> | | | | '_ \ / _ \ '_ \ \___ \| _ < | | | |__| | |_) | __/ | |
>>> |____) | |_) || |_
>>> \____/| .__/ \___|_| |_|_____/|____/_____|
>>> | |
>>> |_|
>>>
>>> Platform Name : SiFive Freedom U540
>>> Platform HART Features : RV64ACDFIMSU
>>> Platform Max HARTs : 5
>>> Current Hart : 3
>>> Firmware Base : 0x80000000
>>> Firmware Size : 100 KB
>>> Runtime SBI Version : 0.2
>>>
>>> MIDELEG : 0x0000000000000222
>>> MEDELEG : 0x000000000000b109
>>> PMP0 : 0x0000000080000000-0x000000008001ffff (A)
>>> PMP1 : 0x0000000000000000-0x0000007fffffffff (A,R,W,X)
>>>
>>>
>>> U-Boot 2020.07-rc2-00154-gb37b258d49-dirty (May 19 2020 - 21:33:36
>>> +0530)
>>>
>>> CPU: rv64imafdc
>>> Model: SiFive HiFive Unleashed A00
>>> DRAM: 8 GiB
>>> No reserved memory region found in source FDT
>>> MMC: spi at 10050000:mmc at 0: 0
>>> In: serial at 10010000
>>> Out: serial at 10010000
>>> Err: serial at 10010000
>>> Net: eth0: ethernet at 10090000
>>> Hit any key to stop autoboot: 0
>>>
>>> opensbi sha1:
>>> 89ba63493c4ce98861144180e408d6db391fd1c3
>
>I have updated my U-Boot and OpenSBI repo and recheck., still not getting
>this "reserved memory" print.
>
>Below is my observation from your boot prints:
>- It looks like your OpenSBI repo is not updated one. Latest OpenSBI version is
>v0.7 .
>- you are using "make PLATFORM=sifive/fu540" instead of " make
>PLATFORM=generic"
>
>Can you please rebuild OpenSBI with above suggestion and reconfirm.
>
>U-Boot sha1:
>c2279d784e35fa25ee3a9fa28a74a1ba545f8c1e
>(Merge branch '2020-05-18-reduce-size-of-common.h')
>
>OpenSBI sha1:
>89ba63493c4ce98861144180e408d6db391fd1c3
>(include: sbi: Add firmware extension constants)
>
>
>Boot prints:
>
>U-Boot SPL 2020.07-rc2-00711-g179f936b5c-dirty (May 20 2020 - 12:42:00
>+0530) Trying to boot from MMC1
>
>OpenSBI v0.7-59-g89ba634
> ____ _____ ____ _____
> / __ \ / ____| _ \_ _|
> | | | |_ __ ___ _ __ | (___ | |_) || |
> | | | | '_ \ / _ \ '_ \ \___ \| _ < | | | |__| | |_) | __/ | | |____) | |_) || |_
> \____/| .__/ \___|_| |_|_____/|____/_____|
> | |
> |_|
>
>Platform Name : SiFive HiFive Unleashed A00
>Platform Features : timer,mfdeleg
>Platform HART Count : 5
>Boot HART ID : 1
>Boot HART ISA : rv64imafdcsu
>BOOT HART Features : pmp,scounteren,mcounteren BOOT HART PMP Count :
>16
>Firmware Base : 0x80000000
>Firmware Size : 116 KB
>Runtime SBI Version : 0.2
>
>MIDELEG : 0x0000000000000222
>MEDELEG : 0x000000000000b109
>PMP0 : 0x0000000080000000-0x000000008001ffff (A)
>PMP1 : 0x0000000000000000-0x0000007fffffffff (A,R,W,X)
>
>
>U-Boot 2020.07-rc2-00711-g179f936b5c-dirty (May 20 2020 - 12:42:00 +0530)
>
>CPU: rv64imafdc
>Model: SiFive HiFive Unleashed A00
>DRAM: 8 GiB
>MMC: spi at 10050000:mmc at 0: 0
>In: serial at 10010000
>Out: serial at 10010000
>Err: serial at 10010000
>Board serial number should not be 0 !!
>Net:
>Warning: ethernet at 10090000 (eth0) using random MAC address -
>7a:3f:bf:c1:f9:29
>eth0: ethernet at 10090000
>Hit any key to stop autoboot: 0
>=>
Any comments ? I am planning to send v12.
>
>>>
>>> gcc version:
>>> gcc version 8.4.0 (Buildroot 2020.05-git-00692-gd645010af2)
>>
>>Regards,
>>Bin
More information about the U-Boot
mailing list