[PATCH] tbs2910: migrate to DM_VIDEO

[Anatolij Gustschin]

Migration to DM_VIDEO driver is long overdue, configure it in
board config files. To enable the display set stdout like:

  setenv stdout serial,vidconsole

Signed-off-by: Anatolij Gustschin <agust at denx.de>
---
This is only build tested.

 configs/tbs2910_defconfig | 7 ++++++-
 include/configs/tbs2910.h | 2 --
 2 files changed, 6 insertions(+), 3 deletions(-)

diff --git a/configs/tbs2910_defconfig b/configs/tbs2910_defconfig
index 2ff0e160f7..b40641c17b 100644
--- a/configs/tbs2910_defconfig
+++ b/configs/tbs2910_defconfig
@@ -1,6 +1,7 @@
 CONFIG_ARM=y
 CONFIG_ARCH_MX6=y
 CONFIG_SYS_TEXT_BASE=0x17800000
+CONFIG_SYS_MALLOC_F_LEN=0x4000
 CONFIG_ENV_SIZE=0x2000
 CONFIG_ENV_OFFSET=0x60000
 CONFIG_TARGET_TBS2910=y
@@ -84,7 +85,11 @@ CONFIG_USB_GADGET_PRODUCT_NUM=0xa4a5
 CONFIG_CI_UDC=y
 CONFIG_USB_GADGET_DOWNLOAD=y
 CONFIG_I2C_EDID=y
+CONFIG_DM_VIDEO=y
+# CONFIG_VIDEO_BPP8 is not set
+# CONFIG_VIDEO_BPP32 is not set
+# CONFIG_VIDEO_ANSI is not set
 CONFIG_VIDEO_IPUV3=y
-CONFIG_VIDEO=y
+CONFIG_SYS_WHITE_ON_BLACK=y
 CONFIG_OF_LIBFDT_ASSUME_MASK=0xff
 # CONFIG_EFI_LOADER is not set
diff --git a/include/configs/tbs2910.h b/include/configs/tbs2910.h
index 7376b91f55..8ab3fcfe3e 100644
--- a/include/configs/tbs2910.h
+++ b/include/configs/tbs2910.h
@@ -37,11 +37,9 @@
 #define CONFIG_MXC_UART_BASE		UART1_BASE /* select UART1/UART2 */
 
 /* Framebuffer */
-#ifdef CONFIG_VIDEO
 #define CONFIG_VIDEO_BMP_RLE8
 #define CONFIG_IMX_HDMI
 #define CONFIG_IMX_VIDEO_SKIP
-#endif
 
 /* PCI */
 #ifdef CONFIG_CMD_PCI
-- 
2.17.1