[PATCH v3 0/2] usb: xhci: Load Raspberry Pi 4 VL805's firmware

[Nicolas Saenz Julienne]

On Tue, 2020-05-05 at 18:26 +0200, Nicolas Saenz Julienne wrote:
> Newer revisions of the RPi4 need their xHCI chip, VL805, firmware to be
> loaded explicitly. Earlier versions didn't need that as they where using
> an EEPROM for that purpose. This series takes care of setting up the
> relevant infrastructure and run the firmware loading routine at the
> right moment.
> 
> Note that this builds on top of Sylwester Nawrocki's "USB host support
> for Raspberry Pi 4 board" series.
> 
> ---

Just for the record, here's the version of this in the Linux Kernel:
https://patchwork.kernel.org/cover/11529585/

Regards,
Nicolas

-------------- next part --------------
A non-text attachment was scrubbed...
Name: signature.asc
Type: application/pgp-signature
Size: 488 bytes
Desc: This is a digitally signed message part
URL: <https://lists.denx.de/pipermail/u-boot/attachments/20200513/f0da21e1/attachment.sig>