[PATCH v9 08/18] riscv: sifive: dts: fu540: add U-Boot dmc node

Pragnesh Patel pragnesh.patel at sifive.com
Wed May 13 08:26:05 CEST 2020


Add dmc node to enable ddr driver. dmc is used to
initialize the memory controller.

Signed-off-by: Pragnesh Patel <pragnesh.patel at sifive.com>
Reviewed-by: Bin Meng <bmeng.cn at gmail.com>
Tested-by: Bin Meng <bmeng.cn at gmail.com>
---
 arch/riscv/dts/fu540-c000-u-boot.dtsi | 9 +++++++++
 1 file changed, 9 insertions(+)

diff --git a/arch/riscv/dts/fu540-c000-u-boot.dtsi b/arch/riscv/dts/fu540-c000-u-boot.dtsi
index fbfe296a03..fc91a7c987 100644
--- a/arch/riscv/dts/fu540-c000-u-boot.dtsi
+++ b/arch/riscv/dts/fu540-c000-u-boot.dtsi
@@ -59,6 +59,15 @@
 			reg = <0x0 0x2000000 0x0 0xc0000>;
 			u-boot,dm-spl;
 		};
+		dmc: dmc at 100b0000 {
+			compatible = "sifive,fu540-c000-ddr";
+			reg = <0x0 0x100b0000 0x0 0x0800
+			       0x0 0x100b2000 0x0 0x2000
+			       0x0 0x100b8000 0x0 0x0fff>;
+			clocks = <&prci PRCI_CLK_DDRPLL>;
+			clock-frequency = <933333324>;
+			u-boot,dm-spl;
+		};
 	};
 };
 
-- 
2.17.1



More information about the U-Boot mailing list