[PATCH 18/22] x86: mtrr: Add support for writing to MTRRs on any CPU

Simon Glass sjg at chromium.org
Fri May 22 04:23:22 CEST 2020


To enable support for the 'mtrr' command, add a way to perform MTRR
operations on selected CPUs.

This works by setting up a little 'operation' structure and sending it
around the CPUs for action.

Signed-off-by: Simon Glass <sjg at chromium.org>
---

 arch/x86/cpu/mtrr.c         | 81 +++++++++++++++++++++++++++++++++++++
 arch/x86/include/asm/mtrr.h | 21 ++++++++++
 2 files changed, 102 insertions(+)

diff --git a/arch/x86/cpu/mtrr.c b/arch/x86/cpu/mtrr.c
index a48c9d8232e..25f317d4298 100644
--- a/arch/x86/cpu/mtrr.c
+++ b/arch/x86/cpu/mtrr.c
@@ -221,3 +221,84 @@ int mtrr_set_next_var(uint type, uint64_t start, uint64_t size)
 
 	return 0;
 }
+
+/** enum mtrr_opcode - supported operations for mtrr_do_oper() */
+enum mtrr_opcode {
+	MTRR_OP_SET,
+	MTRR_OP_SET_VALID,
+};
+
+/**
+ * struct mtrr_oper - An MTRR operation to perform on a CPU
+ *
+ * @opcode: Indicates operation to perform
+ * @reg: MTRR reg number to select (0-7, -1 = all)
+ * @valid: Valid value to write for MTRR_OP_SET_VALID
+ * @base: Base value to write for MTRR_OP_SET
+ * @mask: Mask value to write for MTRR_OP_SET
+ */
+struct mtrr_oper {
+	enum mtrr_opcode opcode;
+	int reg;
+	bool valid;
+	u64 base;
+	u64 mask;
+};
+
+static void mtrr_do_oper(void *arg)
+{
+	struct mtrr_oper *oper = arg;
+	u64 mask;
+
+	switch (oper->opcode) {
+	case MTRR_OP_SET_VALID:
+		mask = native_read_msr(MTRR_PHYS_MASK_MSR(oper->reg));
+		if (oper->valid)
+			mask |= MTRR_PHYS_MASK_VALID;
+		else
+			mask &= ~MTRR_PHYS_MASK_VALID;
+		wrmsrl(MTRR_PHYS_MASK_MSR(oper->reg), mask);
+		break;
+	case MTRR_OP_SET:
+		wrmsrl(MTRR_PHYS_BASE_MSR(oper->reg), oper->base);
+		wrmsrl(MTRR_PHYS_MASK_MSR(oper->reg), oper->mask);
+		break;
+	}
+}
+
+static int mtrr_start_op(int cpu_select, struct mtrr_oper *oper)
+{
+	struct mtrr_state state;
+	int ret;
+
+	mtrr_open(&state, true);
+	ret = mp_run_on_cpus(cpu_select, mtrr_do_oper, oper);
+	mtrr_close(&state, true);
+	if (ret)
+		return log_msg_ret("run", ret);
+
+	return 0;
+}
+
+int mtrr_set_valid(int cpu_select, int reg, bool valid)
+{
+	struct mtrr_oper oper;
+
+	oper.opcode = MTRR_OP_SET_VALID;
+	oper.reg = reg;
+	oper.valid = valid;
+
+	return mtrr_start_op(cpu_select, &oper);
+}
+
+int mtrr_set(int cpu_select, int reg, u64 base, u64 mask)
+{
+	struct mtrr_oper oper;
+
+	oper.opcode = MTRR_OP_SET;
+	oper.reg = reg;
+	oper.base = base;
+	oper.mask = mask;
+
+	return mtrr_start_op(cpu_select, &oper);
+}
diff --git a/arch/x86/include/asm/mtrr.h b/arch/x86/include/asm/mtrr.h
index 476d6f8a9cf..6c50a67e1fe 100644
--- a/arch/x86/include/asm/mtrr.h
+++ b/arch/x86/include/asm/mtrr.h
@@ -159,6 +159,27 @@ int mtrr_set_next_var(uint type, uint64_t base, uint64_t size);
  */
 void mtrr_save_all(struct mtrr_info *info);
 
+/**
+ * mtrr_set_valid() - Set the valid flag for a selected MTRR and CPU(s)
+ *
+ * @cpu_select: Selected CPUs (either a CPU number or MP_SELECT_...)
+ * @reg: MTRR register to write (0-7)
+ * @valid: Valid flag to write
+ * @return 0 on success, -ve on error
+ */
+int mtrr_set_valid(int cpu_select, int reg, bool valid);
+
+/**
+ * mtrr_set() - Set the valid flag for a selected MTRR and CPU(s)
+ *
+ * @cpu_select: Selected CPUs (either a CPU number or MP_SELECT_...)
+ * @reg: MTRR register to write (0-7)
+ * @base: Base address and MTRR_BASE_TYPE_MASK
+ * @mask: Mask and MTRR_PHYS_MASK_VALID
+ * @return 0 on success, -ve on error
+ */
+int mtrr_set(int cpu_select, int reg, u64 base, u64 mask);
+
 #endif
 
 #if ((CONFIG_XIP_ROM_SIZE & (CONFIG_XIP_ROM_SIZE - 1)) != 0)
-- 
2.27.0.rc0.183.gde8f92d652-goog



More information about the U-Boot mailing list