[PATCH] mmc: davinci_mmc: Cleanup to use dt in U-boot and static platdata in SPL

Faiz Abbas faiz_abbas at ti.com
Tue May 26 19:37:44 CEST 2020


On 26/05/20 10:24 pm, Simon Glass wrote:
> Hi Faiz,
> I have ended up with an omap L138 lcdk board. Do you have instructions
> on how to get it booting from uSD and how to create the card image?  I
> have tried various sources but nothing works so far. Also, are you
> able to send me a test image I can 'dd' onto the board?

The commands in board/davinci/da8xxevm/README.da850 don't work?

Try the following:

 2 - using the "dd" command
        $ dd if=u-boot.ais of=/dev/mmcblk0 seek=117 bs=512 conv=fsync


More information about the U-Boot mailing list