[PATCH] mmc: davinci_mmc: Cleanup to use dt in U-boot and static platdata in SPL

[Simon Glass]

Hi Faiz,

On Tue, 26 May 2020 at 11:37, Faiz Abbas <faiz_abbas at ti.com> wrote:
>
> Simon,
>
> On 26/05/20 10:24 pm, Simon Glass wrote:
> > Hi Faiz,
> >
> > I have ended up with an omap L138 lcdk board. Do you have instructions
> > on how to get it booting from uSD and how to create the card image?  I
> > have tried various sources but nothing works so far. Also, are you
> > able to send me a test image I can 'dd' onto the board?
> >
>
> The commands in board/davinci/da8xxevm/README.da850 don't work?
>
> Try the following:
>
>  2 - using the "dd" command
>         $ dd if=u-boot.ais of=/dev/mmcblk0 seek=117 bs=512 conv=fsync

Thanks! I didn't make the connection with da850 or think to look in
board/ for docs.

Regards,
Simon