[PATCH v2] tbs2910: migrate to DM_VIDEO

[Anatolij Gustschin]

Migration to DM_VIDEO driver is long overdue, configure it in
board config files. To enable the display set stdout like:

  setenv stdout serial,vidconsole

Signed-off-by: Anatolij Gustschin <agust at denx.de>
Tested-by: Soeren Moch <smoch at web.de>
---
Changes in v2:
 - add Tested-by tag
 - drop CONFIG_SYS_MALLOC_F_LEN change
 - update default environment to replace 'vga' strings
 - configure options disabling not used DM_VIDEO code (backlight,
   simple panel, cursor and string output commands) to fix build
   breakage with current CI toolchain

 configs/tbs2910_defconfig |  9 ++++++++-
 include/configs/tbs2910.h | 10 ++++------
 2 files changed, 12 insertions(+), 7 deletions(-)

diff --git a/configs/tbs2910_defconfig b/configs/tbs2910_defconfig
index 2ff0e160f7..35c271c91e 100644
--- a/configs/tbs2910_defconfig
+++ b/configs/tbs2910_defconfig
@@ -84,7 +84,14 @@ CONFIG_USB_GADGET_PRODUCT_NUM=0xa4a5
 CONFIG_CI_UDC=y
 CONFIG_USB_GADGET_DOWNLOAD=y
 CONFIG_I2C_EDID=y
+CONFIG_DM_VIDEO=y
+# CONFIG_BACKLIGHT is not set
+# CONFIG_CMD_VIDCONSOLE is not set
+# CONFIG_VIDEO_BPP8 is not set
+# CONFIG_VIDEO_BPP32 is not set
+# CONFIG_VIDEO_ANSI is not set
+# CONFIG_PANEL is not set
 CONFIG_VIDEO_IPUV3=y
-CONFIG_VIDEO=y
+CONFIG_SYS_WHITE_ON_BLACK=y
 CONFIG_OF_LIBFDT_ASSUME_MASK=0xff
 # CONFIG_EFI_LOADER is not set
diff --git a/include/configs/tbs2910.h b/include/configs/tbs2910.h
index 7376b91f55..82165a9ffe 100644
--- a/include/configs/tbs2910.h
+++ b/include/configs/tbs2910.h
@@ -37,11 +37,9 @@
 #define CONFIG_MXC_UART_BASE		UART1_BASE /* select UART1/UART2 */
 
 /* Framebuffer */
-#ifdef CONFIG_VIDEO
 #define CONFIG_VIDEO_BMP_RLE8
 #define CONFIG_IMX_HDMI
 #define CONFIG_IMX_VIDEO_SKIP
-#endif
 
 /* PCI */
 #ifdef CONFIG_CMD_PCI
@@ -94,11 +92,11 @@
 	"fan=gpio set 92\0" \
 	"set_con_serial=setenv stdout serial; " \
 			"setenv stderr serial\0" \
-	"set_con_hdmi=setenv stdout serial,vga; " \
-			"setenv stderr serial,vga\0" \
-	"stderr=serial,vga\0" \
+	"set_con_hdmi=setenv stdout serial,vidconsole; " \
+			"setenv stderr serial,vidconsole\0" \
+	"stderr=serial,vidconsole\0" \
 	"stdin=serial,usbkbd\0" \
-	"stdout=serial,vga\0"
+	"stdout=serial,vidconsole\0"
 
 #define CONFIG_BOOTCOMMAND \
 	"mmc rescan; " \
-- 
2.17.1