[PATCH v4 01/12] phy: atheros: Make RGMII Tx delays actually configurable for AR8035

[Tom Rini]

On Thu, May 07, 2020 at 12:11:48AM +0200, Michael Walle wrote:

> From: Vladimir Oltean <vladimir.oltean at nxp.com>
> 
> Delete the extraneous write to debug reg 5 that enables Tx delay
> 
> When the driver was originally introduced in commit "6027384a phylib:
> Add Atheros AR8035 GETH PHY support", the Tx delay was being
> unconditionally enabled.
> 
> Then during "2ec4d10b phy: atheros: add support for RGMII_ID, RGMII_TXID
> and RGMII_RXID", the author did not notice that code for enabling Tx
> delay code was already. Therefore, the if condition for Tx delay has
> always been useless for this PHY since this commit introduced it.
> 
> Prior to this patch, every AR8035 PHY in U-boot had Tx delay enabled.
> After this patch, only those who define the interface as RGMII_TXID or
> RGMII_ID will. This is to be expected, but will nonetheless break the
> setups of those who didn't know they rely on Tx delay implicitly.
> 
> Signed-off-by: Vladimir Oltean <vladimir.oltean at nxp.com>
> Acked-by: Joe Hershberger <joe.hershberger at ni.com>

Applied to u-boot/master, thanks!

-- 
Tom
-------------- next part --------------
A non-text attachment was scrubbed...
Name: signature.asc
Type: application/pgp-signature
Size: 659 bytes
Desc: not available
URL: <https://lists.denx.de/pipermail/u-boot/attachments/20200507/960fd7e7/attachment.sig>