[PATCH v2 1/4] x86: spi: Add a way to access the SPI mapping via registers
Simon Glass
sjg at chromium.org
Wed May 27 14:58:46 CEST 2020
At present the PCI BDF (bus/device/function) is needed to access the SPI
mapping, since the registers are at BAR0. This doesn't work when PCI
auto-config has not been done yet, since BARs are unassigned.
Add another way to find the mapping, using the MMIO base, if the caller
knows this.
Also add a missing function comment.
Signed-off-by: Simon Glass <sjg at chromium.org>
---
Changes in v2: None
arch/x86/cpu/intel_common/fast_spi.c | 19 ++++++++++++++-----
arch/x86/include/asm/fast_spi.h | 19 +++++++++++++++++++
2 files changed, 33 insertions(+), 5 deletions(-)
diff --git a/arch/x86/cpu/intel_common/fast_spi.c b/arch/x86/cpu/intel_common/fast_spi.c
index a6e3d0a5bf..5d3944dee2 100644
--- a/arch/x86/cpu/intel_common/fast_spi.c
+++ b/arch/x86/cpu/intel_common/fast_spi.c
@@ -31,21 +31,30 @@ static ulong fast_spi_get_bios_region(struct fast_spi_regs *regs,
return bios_start;
}
+int fast_spi_get_bios_mmap_regs(struct fast_spi_regs *regs, ulong *map_basep,
+ uint *map_sizep, uint *offsetp)
+{
+ ulong base;
+
+ base = fast_spi_get_bios_region(regs, map_sizep);
+ *map_basep = (u32)-*map_sizep - base;
+ *offsetp = base;
+
+ return 0;
+}
+
int fast_spi_get_bios_mmap(pci_dev_t pdev, ulong *map_basep, uint *map_sizep,
uint *offsetp)
{
struct fast_spi_regs *regs;
- ulong bar, base, mmio_base;
+ ulong bar, mmio_base;
/* Special case to find mapping without probing the device */
pci_x86_read_config(pdev, PCI_BASE_ADDRESS_0, &bar, PCI_SIZE_32);
mmio_base = bar & PCI_BASE_ADDRESS_MEM_MASK;
regs = (struct fast_spi_regs *)mmio_base;
- base = fast_spi_get_bios_region(regs, map_sizep);
- *map_basep = (u32)-*map_sizep - base;
- *offsetp = base;
- return 0;
+ return fast_spi_get_bios_mmap_regs(regs, map_basep, map_sizep, offsetp);
}
int fast_spi_early_init(pci_dev_t pdev, ulong mmio_base)
diff --git a/arch/x86/include/asm/fast_spi.h b/arch/x86/include/asm/fast_spi.h
index 47c1da80d7..7a81d4f05c 100644
--- a/arch/x86/include/asm/fast_spi.h
+++ b/arch/x86/include/asm/fast_spi.h
@@ -64,6 +64,25 @@ check_member(fast_spi_regs, ptdata, 0xd0);
int fast_spi_get_bios_mmap(pci_dev_t pdev, ulong *map_basep, uint *map_sizep,
uint *offsetp);
+/**
+ * fast_spi_get_bios_mmap_regs() - Get memory map for SPI flash given regs
+ *
+ * @regs: SPI registers to use
+ * @map_basep: Returns base memory address for mapped SPI
+ * @map_sizep: Returns size of mapped SPI
+ * @offsetp: Returns start offset of SPI flash where the map works
+ * correctly (offsets before this are not visible)
+ * @return 0 (always)
+ */
+int fast_spi_get_bios_mmap_regs(struct fast_spi_regs *regs, ulong *map_basep,
+ uint *map_sizep, uint *offsetp);
+
+/**
+ * fast_spi_early_init() - Set up a BAR to use SPI early in U-Boot
+ *
+ * @pdev: PCI device to use (this is the Fast SPI device)
+ * @mmio_base: MMIO base to use to access registers
+ */
int fast_spi_early_init(pci_dev_t pdev, ulong mmio_base);
#endif /* ASM_FAST_SPI_H */
--
2.27.0.rc0.183.gde8f92d652-goog
More information about the U-Boot
mailing list