[PATCH 1/3] net: sun8i_emac: Use consistent clock bitfield definitions

Samuel Holland samuel at sholland.org
Fri May 8 01:10:50 CEST 2020


While the R40 uses a different register for EMAC clock configuration
than other chips, the register has a very similar layout. Reuse the
existing bitfield definitions in this file, since they match.

This allows the driver to compile on the H6 platform, where the
CCM_GMAC_CTRL definitions are not present.

Signed-off-by: Samuel Holland <samuel at sholland.org>
---
 drivers/net/sun8i_emac.c | 6 +++---
 1 file changed, 3 insertions(+), 3 deletions(-)

diff --git a/drivers/net/sun8i_emac.c b/drivers/net/sun8i_emac.c
index 1ae776b446..dcd18833a2 100644
--- a/drivers/net/sun8i_emac.c
+++ b/drivers/net/sun8i_emac.c
@@ -296,9 +296,9 @@ static int sun8i_emac_set_syscon(struct sun8i_eth_pdata *pdata,
 	if (priv->variant == R40_GMAC) {
 		/* Select RGMII for R40 */
 		reg = readl(priv->sysctl_reg + 0x164);
-		reg |= CCM_GMAC_CTRL_TX_CLK_SRC_INT_RGMII |
-		       CCM_GMAC_CTRL_GPIT_RGMII |
-		       CCM_GMAC_CTRL_TX_CLK_DELAY(CONFIG_GMAC_TX_DELAY);
+		reg |= SC_ETCS_INT_GMII |
+		       SC_EPIT |
+		       (CONFIG_GMAC_TX_DELAY << SC_ETXDC_OFFSET);
 
 		writel(reg, priv->sysctl_reg + 0x164);
 		return 0;
-- 
2.24.1



More information about the U-Boot mailing list