[PATCH v4 11/12] phy: atheros: ar8035: remove static clock config

[Tom Rini]

On Thu, May 07, 2020 at 12:11:58AM +0200, Michael Walle wrote:

> We can configure the clock output in the device tree. Disable the
> hardcoded one in here. This is highly board-specific and should have
> never been enabled in the PHY driver.
> 
> If bisecting shows that this commit breaks your board it probably
> depends on the clock output of your Atheros AR8035 PHY. Please have a
> look at doc/device-tree-bindings/net/phy/atheros.txt. You need to set
> "clk-out-frequency = <125000000>" because that value was the hardcoded
> value until this commit.
> 
> Signed-off-by: Michael Walle <michael at walle.cc>
> Acked-by: Joe Hershberger <joe.hershberger at ni.com>

Applied to u-boot/master, thanks!

-- 
Tom
-------------- next part --------------
A non-text attachment was scrubbed...
Name: signature.asc
Type: application/pgp-signature
Size: 659 bytes
Desc: not available
URL: <https://lists.denx.de/pipermail/u-boot/attachments/20200507/60655c1d/attachment.sig>