[PATCH 10/14] ti: Drop panda board
Jagan Teki
jagan at amarulasolutions.com
Tue May 26 19:47:13 CEST 2020
DM, DM_SPI and other driver model migration deadlines
are expired for this board.
Drop it.
Cc: Lokesh Vutla <lokeshvutla at ti.com>
Signed-off-by: Jagan Teki <jagan at amarulasolutions.com>
---
arch/arm/mach-omap2/omap4/Kconfig | 4 -
board/ti/panda/Kconfig | 12 --
board/ti/panda/MAINTAINERS | 6 -
board/ti/panda/Makefile | 6 -
board/ti/panda/panda.c | 346 ------------------------------
board/ti/panda/panda_mux_data.h | 86 --------
configs/omap4_panda_defconfig | 42 ----
include/configs/omap4_panda.h | 34 ---
8 files changed, 536 deletions(-)
delete mode 100644 board/ti/panda/Kconfig
delete mode 100644 board/ti/panda/MAINTAINERS
delete mode 100644 board/ti/panda/Makefile
delete mode 100644 board/ti/panda/panda.c
delete mode 100644 board/ti/panda/panda_mux_data.h
delete mode 100644 configs/omap4_panda_defconfig
delete mode 100644 include/configs/omap4_panda.h
diff --git a/arch/arm/mach-omap2/omap4/Kconfig b/arch/arm/mach-omap2/omap4/Kconfig
index 899289b645..4cc360f38a 100644
--- a/arch/arm/mach-omap2/omap4/Kconfig
+++ b/arch/arm/mach-omap2/omap4/Kconfig
@@ -4,9 +4,6 @@ choice
prompt "OMAP4 board select"
optional
-config TARGET_OMAP4_PANDA
- bool "TI OMAP4 PandaBoard"
-
config TARGET_OMAP4_SDP4430
bool "TI OMAP4 SDP4430"
@@ -18,7 +15,6 @@ endchoice
config SYS_SOC
default "omap4"
-source "board/ti/panda/Kconfig"
source "board/ti/sdp4430/Kconfig"
source "board/amazon/kc1/Kconfig"
diff --git a/board/ti/panda/Kconfig b/board/ti/panda/Kconfig
deleted file mode 100644
index 8f277b612a..0000000000
--- a/board/ti/panda/Kconfig
+++ /dev/null
@@ -1,12 +0,0 @@
-if TARGET_OMAP4_PANDA
-
-config SYS_BOARD
- default "panda"
-
-config SYS_VENDOR
- default "ti"
-
-config SYS_CONFIG_NAME
- default "omap4_panda"
-
-endif
diff --git a/board/ti/panda/MAINTAINERS b/board/ti/panda/MAINTAINERS
deleted file mode 100644
index 2142368271..0000000000
--- a/board/ti/panda/MAINTAINERS
+++ /dev/null
@@ -1,6 +0,0 @@
-PANDA BOARD
-M: Lokesh Vutla <lokeshvutla at ti.com>
-S: Maintained
-F: board/ti/panda/
-F: include/configs/omap4_panda.h
-F: configs/omap4_panda_defconfig
diff --git a/board/ti/panda/Makefile b/board/ti/panda/Makefile
deleted file mode 100644
index dd2ff33afa..0000000000
--- a/board/ti/panda/Makefile
+++ /dev/null
@@ -1,6 +0,0 @@
-# SPDX-License-Identifier: GPL-2.0+
-#
-# (C) Copyright 2000, 2001, 2002
-# Wolfgang Denk, DENX Software Engineering, wd at denx.de.
-
-obj-y := panda.o
diff --git a/board/ti/panda/panda.c b/board/ti/panda/panda.c
deleted file mode 100644
index 9ebecfdbf5..0000000000
--- a/board/ti/panda/panda.c
+++ /dev/null
@@ -1,346 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0+
-/*
- * (C) Copyright 2010
- * Texas Instruments Incorporated, <www.ti.com>
- * Steve Sakoman <steve at sakoman.com>
- */
-#include <common.h>
-#include <init.h>
-#include <log.h>
-#include <net.h>
-#include <asm/mach-types.h>
-#include <asm/arch/sys_proto.h>
-#include <asm/arch/mmc_host_def.h>
-#include <asm/arch/clock.h>
-#include <asm/arch/gpio.h>
-#include <asm/gpio.h>
-#include <env.h>
-#include <twl6030.h>
-
-#include "panda_mux_data.h"
-
-#ifdef CONFIG_USB_EHCI_HCD
-#include <usb.h>
-#include <asm/arch/ehci.h>
-#include <asm/ehci-omap.h>
-#endif
-
-#define PANDA_ULPI_PHY_TYPE_GPIO 182
-#define PANDA_BOARD_ID_1_GPIO 101
-#define PANDA_ES_BOARD_ID_1_GPIO 48
-#define PANDA_BOARD_ID_2_GPIO 171
-#define PANDA_ES_BOARD_ID_3_GPIO 3
-#define PANDA_ES_BOARD_ID_4_GPIO 2
-
-DECLARE_GLOBAL_DATA_PTR;
-
-const struct omap_sysinfo sysinfo = {
- "Board: OMAP4 Panda\n"
-};
-
-struct omap4_scrm_regs *const scrm = (struct omap4_scrm_regs *)0x4a30a000;
-
-/**
- * @brief board_init
- *
- * @return 0
- */
-int board_init(void)
-{
- gpmc_init();
-
- gd->bd->bi_arch_number = MACH_TYPE_OMAP4_PANDA;
- gd->bd->bi_boot_params = (0x80000000 + 0x100); /* boot param addr */
-
- return 0;
-}
-
-int board_eth_init(bd_t *bis)
-{
- return 0;
-}
-
-/*
-* Routine: get_board_revision
-* Description: Detect if we are running on a panda revision A1-A6,
-* or an ES panda board. This can be done by reading
-* the level of GPIOs and checking the processor revisions.
-* This should result in:
-* Panda 4430:
-* GPIO171, GPIO101, GPIO182: 0 1 1 => A1-A5
-* GPIO171, GPIO101, GPIO182: 1 0 1 => A6
-* Panda ES:
-* GPIO2, GPIO3, GPIO171, GPIO48, GPIO182: 0 0 0 1 1 => B1/B2
-* GPIO2, GPIO3, GPIO171, GPIO48, GPIO182: 0 0 1 1 1 => B3
-*/
-int get_board_revision(void)
-{
- int board_id0, board_id1, board_id2;
- int board_id3, board_id4;
- int board_id;
-
- int processor_rev = omap_revision();
-
- /* Setup the mux for the common board ID pins (gpio 171 and 182) */
- writew((IEN | M3), (*ctrl)->control_padconf_core_base + UNIPRO_TX0);
- writew((IEN | M3), (*ctrl)->control_padconf_core_base + FREF_CLK2_OUT);
-
- board_id0 = gpio_get_value(PANDA_ULPI_PHY_TYPE_GPIO);
- board_id2 = gpio_get_value(PANDA_BOARD_ID_2_GPIO);
-
- if ((processor_rev >= OMAP4460_ES1_0 &&
- processor_rev <= OMAP4460_ES1_1)) {
- /*
- * Setup the mux for the ES specific board ID pins (gpio 101,
- * 2 and 3.
- */
- writew((IEN | M3), (*ctrl)->control_padconf_core_base +
- GPMC_A24);
- writew((IEN | M3), (*ctrl)->control_padconf_core_base +
- UNIPRO_RY0);
- writew((IEN | M3), (*ctrl)->control_padconf_core_base +
- UNIPRO_RX1);
-
- board_id1 = gpio_get_value(PANDA_ES_BOARD_ID_1_GPIO);
- board_id3 = gpio_get_value(PANDA_ES_BOARD_ID_3_GPIO);
- board_id4 = gpio_get_value(PANDA_ES_BOARD_ID_4_GPIO);
-
-#ifdef CONFIG_ENV_VARS_UBOOT_RUNTIME_CONFIG
- env_set("board_name", "panda-es");
-#endif
- board_id = ((board_id4 << 4) | (board_id3 << 3) |
- (board_id2 << 2) | (board_id1 << 1) | (board_id0));
- } else {
- /* Setup the mux for the Ax specific board ID pins (gpio 101) */
- writew((IEN | M3), (*ctrl)->control_padconf_core_base +
- FREF_CLK2_OUT);
-
- board_id1 = gpio_get_value(PANDA_BOARD_ID_1_GPIO);
- board_id = ((board_id2 << 2) | (board_id1 << 1) | (board_id0));
-
-#ifdef CONFIG_ENV_VARS_UBOOT_RUNTIME_CONFIG
- if ((board_id >= 0x3) && (processor_rev == OMAP4430_ES2_3))
- env_set("board_name", "panda-a4");
-#endif
- }
-
- return board_id;
-}
-
-/**
- * is_panda_es_rev_b3() - Detect if we are running on rev B3 of panda board ES
- *
- *
- * Detect if we are running on B3 version of ES panda board,
- * This can be done by reading the level of GPIO 171 and checking the
- * processor revisions.
- * GPIO171: 1 => Panda ES Rev B3
- *
- * Return : return 1 if Panda ES Rev B3 , else return 0
- */
-u8 is_panda_es_rev_b3(void)
-{
- int processor_rev = omap_revision();
- int ret = 0;
-
- if ((processor_rev >= OMAP4460_ES1_0 &&
- processor_rev <= OMAP4460_ES1_1)) {
-
- /* Setup the mux for the common board ID pins (gpio 171) */
- writew((IEN | M3),
- (*ctrl)->control_padconf_core_base + UNIPRO_TX0);
-
- /* if processor_rev is panda ES and GPIO171 is 1,it is rev b3 */
- ret = gpio_get_value(PANDA_BOARD_ID_2_GPIO);
- }
- return ret;
-}
-
-#ifdef CONFIG_SYS_EMIF_PRECALCULATED_TIMING_REGS
-/*
- * emif_get_reg_dump() - emif_get_reg_dump strong function
- *
- * @emif_nr - emif base
- * @regs - reg dump of timing values
- *
- * Strong function to override emif_get_reg_dump weak function in sdram_elpida.c
- */
-void emif_get_reg_dump(u32 emif_nr, const struct emif_regs **regs)
-{
- u32 omap4_rev = omap_revision();
-
- /* Same devices and geometry on both EMIFs */
- if (omap4_rev == OMAP4430_ES1_0)
- *regs = &emif_regs_elpida_380_mhz_1cs;
- else if (omap4_rev == OMAP4430_ES2_0)
- *regs = &emif_regs_elpida_200_mhz_2cs;
- else if (omap4_rev == OMAP4430_ES2_3)
- *regs = &emif_regs_elpida_400_mhz_1cs;
- else if (omap4_rev < OMAP4470_ES1_0) {
- if(is_panda_es_rev_b3())
- *regs = &emif_regs_elpida_400_mhz_1cs;
- else
- *regs = &emif_regs_elpida_400_mhz_2cs;
- }
- else
- *regs = &emif_regs_elpida_400_mhz_1cs;
-}
-
-void emif_get_dmm_regs(const struct dmm_lisa_map_regs
- **dmm_lisa_regs)
-{
- u32 omap_rev = omap_revision();
-
- if (omap_rev == OMAP4430_ES1_0)
- *dmm_lisa_regs = &lisa_map_2G_x_1_x_2;
- else if (omap_rev == OMAP4430_ES2_3)
- *dmm_lisa_regs = &lisa_map_2G_x_2_x_2;
- else if (omap_rev < OMAP4460_ES1_0)
- *dmm_lisa_regs = &lisa_map_2G_x_2_x_2;
- else
- *dmm_lisa_regs = &ma_lisa_map_2G_x_2_x_2;
-}
-
-#endif
-
-/**
- * @brief misc_init_r - Configure Panda board specific configurations
- * such as power configurations, ethernet initialization as phase2 of
- * boot sequence
- *
- * @return 0
- */
-int misc_init_r(void)
-{
- int phy_type;
- u32 auxclk, altclksrc;
-
- /* EHCI is not supported on ES1.0 */
- if (omap_revision() == OMAP4430_ES1_0)
- return 0;
-
- get_board_revision();
-
- gpio_direction_input(PANDA_ULPI_PHY_TYPE_GPIO);
- phy_type = gpio_get_value(PANDA_ULPI_PHY_TYPE_GPIO);
-
- if (phy_type == 1) {
- /* ULPI PHY supplied by auxclk3 derived from sys_clk */
- debug("ULPI PHY supplied by auxclk3\n");
-
- auxclk = readl(&scrm->auxclk3);
- /* Select sys_clk */
- auxclk &= ~AUXCLK_SRCSELECT_MASK;
- auxclk |= AUXCLK_SRCSELECT_SYS_CLK << AUXCLK_SRCSELECT_SHIFT;
- /* Set the divisor to 2 */
- auxclk &= ~AUXCLK_CLKDIV_MASK;
- auxclk |= AUXCLK_CLKDIV_2 << AUXCLK_CLKDIV_SHIFT;
- /* Request auxilary clock #3 */
- auxclk |= AUXCLK_ENABLE_MASK;
-
- writel(auxclk, &scrm->auxclk3);
- } else {
- /* ULPI PHY supplied by auxclk1 derived from PER dpll */
- debug("ULPI PHY supplied by auxclk1\n");
-
- auxclk = readl(&scrm->auxclk1);
- /* Select per DPLL */
- auxclk &= ~AUXCLK_SRCSELECT_MASK;
- auxclk |= AUXCLK_SRCSELECT_PER_DPLL << AUXCLK_SRCSELECT_SHIFT;
- /* Set the divisor to 16 */
- auxclk &= ~AUXCLK_CLKDIV_MASK;
- auxclk |= AUXCLK_CLKDIV_16 << AUXCLK_CLKDIV_SHIFT;
- /* Request auxilary clock #3 */
- auxclk |= AUXCLK_ENABLE_MASK;
-
- writel(auxclk, &scrm->auxclk1);
- }
-
- altclksrc = readl(&scrm->altclksrc);
-
- /* Activate alternate system clock supplier */
- altclksrc &= ~ALTCLKSRC_MODE_MASK;
- altclksrc |= ALTCLKSRC_MODE_ACTIVE;
-
- /* enable clocks */
- altclksrc |= ALTCLKSRC_ENABLE_INT_MASK | ALTCLKSRC_ENABLE_EXT_MASK;
-
- writel(altclksrc, &scrm->altclksrc);
-
- omap_die_id_usbethaddr();
-
- return 0;
-}
-
-void set_muxconf_regs(void)
-{
- do_set_mux((*ctrl)->control_padconf_core_base,
- core_padconf_array_essential,
- sizeof(core_padconf_array_essential) /
- sizeof(struct pad_conf_entry));
-
- do_set_mux((*ctrl)->control_padconf_wkup_base,
- wkup_padconf_array_essential,
- sizeof(wkup_padconf_array_essential) /
- sizeof(struct pad_conf_entry));
-
- if (omap_revision() >= OMAP4460_ES1_0)
- do_set_mux((*ctrl)->control_padconf_wkup_base,
- wkup_padconf_array_essential_4460,
- sizeof(wkup_padconf_array_essential_4460) /
- sizeof(struct pad_conf_entry));
-}
-
-#if defined(CONFIG_MMC)
-int board_mmc_init(bd_t *bis)
-{
- return omap_mmc_init(0, 0, 0, -1, -1);
-}
-
-#if !defined(CONFIG_SPL_BUILD)
-void board_mmc_power_init(void)
-{
- twl6030_power_mmc_init(0);
-}
-#endif
-#endif
-
-#ifdef CONFIG_USB_EHCI_HCD
-
-static struct omap_usbhs_board_data usbhs_bdata = {
- .port_mode[0] = OMAP_EHCI_PORT_MODE_PHY,
- .port_mode[1] = OMAP_USBHS_PORT_MODE_UNUSED,
- .port_mode[2] = OMAP_USBHS_PORT_MODE_UNUSED,
-};
-
-int ehci_hcd_init(int index, enum usb_init_type init,
- struct ehci_hccr **hccr, struct ehci_hcor **hcor)
-{
- int ret;
- unsigned int utmi_clk;
-
- /* Now we can enable our port clocks */
- utmi_clk = readl((void *)CM_L3INIT_HSUSBHOST_CLKCTRL);
- utmi_clk |= HSUSBHOST_CLKCTRL_CLKSEL_UTMI_P1_MASK;
- setbits_le32((void *)CM_L3INIT_HSUSBHOST_CLKCTRL, utmi_clk);
-
- ret = omap_ehci_hcd_init(index, &usbhs_bdata, hccr, hcor);
- if (ret < 0)
- return ret;
-
- return 0;
-}
-
-int ehci_hcd_stop(int index)
-{
- return omap_ehci_hcd_stop();
-}
-#endif
-
-/*
- * get_board_rev() - get board revision
- */
-u32 get_board_rev(void)
-{
- return 0x20;
-}
diff --git a/board/ti/panda/panda_mux_data.h b/board/ti/panda/panda_mux_data.h
deleted file mode 100644
index ad9e36525b..0000000000
--- a/board/ti/panda/panda_mux_data.h
+++ /dev/null
@@ -1,86 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0+ */
-/*
- * (C) Copyright 2010
- * Texas Instruments Incorporated, <www.ti.com>
- *
- * Balaji Krishnamoorthy <balajitk at ti.com>
- * Aneesh V <aneesh at ti.com>
- */
-#ifndef _PANDA_MUX_DATA_H_
-#define _PANDA_MUX_DATA_H_
-
-#include <asm/arch/mux_omap4.h>
-
-
-const struct pad_conf_entry core_padconf_array_essential[] = {
-
-{GPMC_AD0, (PTU | IEN | OFF_EN | OFF_PD | OFF_IN | M1)}, /* sdmmc2_dat0 */
-{GPMC_AD1, (PTU | IEN | OFF_EN | OFF_PD | OFF_IN | M1)}, /* sdmmc2_dat1 */
-{GPMC_AD2, (PTU | IEN | OFF_EN | OFF_PD | OFF_IN | M1)}, /* sdmmc2_dat2 */
-{GPMC_AD3, (PTU | IEN | OFF_EN | OFF_PD | OFF_IN | M1)}, /* sdmmc2_dat3 */
-{GPMC_AD4, (PTU | IEN | OFF_EN | OFF_PD | OFF_IN | M1)}, /* sdmmc2_dat4 */
-{GPMC_AD5, (PTU | IEN | OFF_EN | OFF_PD | OFF_IN | M1)}, /* sdmmc2_dat5 */
-{GPMC_AD6, (PTU | IEN | OFF_EN | OFF_PD | OFF_IN | M1)}, /* sdmmc2_dat6 */
-{GPMC_AD7, (PTU | IEN | OFF_EN | OFF_PD | OFF_IN | M1)}, /* sdmmc2_dat7 */
-{GPMC_NOE, (PTU | IEN | OFF_EN | OFF_OUT_PTD | M1)}, /* sdmmc2_clk */
-{GPMC_NWE, (PTU | IEN | OFF_EN | OFF_PD | OFF_IN | M1)}, /* sdmmc2_cmd */
-{SDMMC1_CLK, (PTU | OFF_EN | OFF_OUT_PTD | M0)}, /* sdmmc1_clk */
-{SDMMC1_CMD, (PTU | IEN | OFF_EN | OFF_PD | OFF_IN | M0)}, /* sdmmc1_cmd */
-{SDMMC1_DAT0, (PTU | IEN | OFF_EN | OFF_PD | OFF_IN | M0)}, /* sdmmc1_dat0 */
-{SDMMC1_DAT1, (PTU | IEN | OFF_EN | OFF_PD | OFF_IN | M0)}, /* sdmmc1_dat1 */
-{SDMMC1_DAT2, (PTU | IEN | OFF_EN | OFF_PD | OFF_IN | M0)}, /* sdmmc1_dat2 */
-{SDMMC1_DAT3, (PTU | IEN | OFF_EN | OFF_PD | OFF_IN | M0)}, /* sdmmc1_dat3 */
-{SDMMC1_DAT4, (PTU | IEN | OFF_EN | OFF_PD | OFF_IN | M0)}, /* sdmmc1_dat4 */
-{SDMMC1_DAT5, (PTU | IEN | OFF_EN | OFF_PD | OFF_IN | M0)}, /* sdmmc1_dat5 */
-{SDMMC1_DAT6, (PTU | IEN | OFF_EN | OFF_PD | OFF_IN | M0)}, /* sdmmc1_dat6 */
-{SDMMC1_DAT7, (PTU | IEN | OFF_EN | OFF_PD | OFF_IN | M0)}, /* sdmmc1_dat7 */
-{I2C1_SCL, (PTU | IEN | M0)}, /* i2c1_scl */
-{I2C1_SDA, (PTU | IEN | M0)}, /* i2c1_sda */
-{I2C2_SCL, (PTU | IEN | M0)}, /* i2c2_scl */
-{I2C2_SDA, (PTU | IEN | M0)}, /* i2c2_sda */
-{I2C3_SCL, (PTU | IEN | M0)}, /* i2c3_scl */
-{I2C3_SDA, (PTU | IEN | M0)}, /* i2c3_sda */
-{I2C4_SCL, (PTU | IEN | M0)}, /* i2c4_scl */
-{I2C4_SDA, (PTU | IEN | M0)}, /* i2c4_sda */
-{UART3_CTS_RCTX, (PTU | IEN | M0)}, /* uart3_tx */
-{UART3_RTS_SD, (M0)}, /* uart3_rts_sd */
-{UART3_RX_IRRX, (IEN | M0)}, /* uart3_rx */
-{UART3_TX_IRTX, (M0)}, /* uart3_tx */
-{USBB1_ULPITLL_CLK, (PTD | IEN | OFF_EN | OFF_PD | OFF_IN | M4)},/* usbb1_ulpiphy_clk */
-{USBB1_ULPITLL_STP, (OFF_EN | OFF_OUT_PTD | M4)}, /* usbb1_ulpiphy_stp */
-{USBB1_ULPITLL_DIR, (IEN | OFF_EN | OFF_PD | OFF_IN | M4)}, /* usbb1_ulpiphy_dir */
-{USBB1_ULPITLL_NXT, (IEN | OFF_EN | OFF_PD | OFF_IN | M4)}, /* usbb1_ulpiphy_nxt */
-{USBB1_ULPITLL_DAT0, (IEN | OFF_EN | OFF_PD | OFF_IN | M4)}, /* usbb1_ulpiphy_dat0 */
-{USBB1_ULPITLL_DAT1, (IEN | OFF_EN | OFF_PD | OFF_IN | M4)}, /* usbb1_ulpiphy_dat1 */
-{USBB1_ULPITLL_DAT2, (IEN | OFF_EN | OFF_PD | OFF_IN | M4)}, /* usbb1_ulpiphy_dat2 */
-{USBB1_ULPITLL_DAT3, (IEN | OFF_EN | OFF_PD | OFF_IN | M4)}, /* usbb1_ulpiphy_dat3 */
-{USBB1_ULPITLL_DAT4, (IEN | OFF_EN | OFF_PD | OFF_IN | M4)}, /* usbb1_ulpiphy_dat4 */
-{USBB1_ULPITLL_DAT5, (IEN | OFF_EN | OFF_PD | OFF_IN | M4)}, /* usbb1_ulpiphy_dat5 */
-{USBB1_ULPITLL_DAT6, (IEN | OFF_EN | OFF_PD | OFF_IN | M4)}, /* usbb1_ulpiphy_dat6 */
-{USBB1_ULPITLL_DAT7, (IEN | OFF_EN | OFF_PD | OFF_IN | M4)}, /* usbb1_ulpiphy_dat7 */
-{USBB1_HSIC_DATA, (IEN | OFF_EN | OFF_PD | OFF_IN | M0)}, /* usbb1_hsic_data */
-{USBB1_HSIC_STROBE, (IEN | OFF_EN | OFF_PD | OFF_IN | M0)}, /* usbb1_hsic_strobe */
-{USBC1_ICUSB_DP, (IEN | M0)}, /* usbc1_icusb_dp */
-{USBC1_ICUSB_DM, (IEN | M0)}, /* usbc1_icusb_dm */
-{UNIPRO_TY2, (PTU | IEN | M3)}, /* gpio_1 */
-{GPMC_WAIT1, (PTD | OFF_EN | OFF_PD | OFF_OUT_PTD | M3)}, /* gpio_62 */
-{FREF_CLK2_OUT, (PTU | IEN | M3)}, /* gpio_182 */
-
-};
-
-const struct pad_conf_entry wkup_padconf_array_essential[] = {
-
-{PAD1_SR_SCL, (PTU | IEN | M0)}, /* sr_scl */
-{PAD0_SR_SDA, (PTU | IEN | M0)}, /* sr_sda */
-{PAD1_SYS_32K, (IEN | M0)}, /* sys_32k */
-{PAD0_FREF_CLK3_OUT, (M0)}, /* fref_clk3_out */
-
-};
-
-const struct pad_conf_entry wkup_padconf_array_essential_4460[] = {
-
-{PAD1_FREF_CLK4_REQ, (M3)}, /* gpio_wk7 for TPS: Mode 3 */
-
-};
-
-#endif /* _PANDA_MUX_DATA_H_ */
diff --git a/configs/omap4_panda_defconfig b/configs/omap4_panda_defconfig
deleted file mode 100644
index 3ac6319d2d..0000000000
--- a/configs/omap4_panda_defconfig
+++ /dev/null
@@ -1,42 +0,0 @@
-CONFIG_ARM=y
-CONFIG_ARCH_OMAP2PLUS=y
-CONFIG_OMAP44XX=y
-CONFIG_TARGET_OMAP4_PANDA=y
-CONFIG_SPL=y
-CONFIG_SPL_TEXT_BASE=0x40300000
-CONFIG_DISTRO_DEFAULTS=y
-CONFIG_BOOTCOMMAND="if test ${boot_fit} -eq 1; then run update_to_fit; fi; run findfdt; run init_console; run envboot; run distro_bootcmd"
-CONFIG_SYS_CONSOLE_IS_IN_ENV=y
-CONFIG_SYS_CONSOLE_INFO_QUIET=y
-CONFIG_VERSION_VARIABLE=y
-# CONFIG_SPL_FS_EXT4 is not set
-# CONFIG_SPL_I2C_SUPPORT is not set
-# CONFIG_SPL_NAND_SUPPORT is not set
-CONFIG_SPL_OS_BOOT=y
-CONFIG_CMD_SPL=y
-CONFIG_CMD_ASKENV=y
-CONFIG_CMD_GPIO=y
-CONFIG_CMD_I2C=y
-CONFIG_CMD_MMC=y
-CONFIG_CMD_SPI=y
-CONFIG_CMD_USB=y
-# CONFIG_CMD_SETEXPR is not set
-# CONFIG_CMD_NFS is not set
-CONFIG_CMD_EXT4_WRITE=y
-CONFIG_ENV_IS_IN_FAT=y
-CONFIG_ENV_FAT_DEVICE_AND_PART="0:1"
-CONFIG_SYS_RELOC_GD_ENV_ADDR=y
-CONFIG_ENV_VARS_UBOOT_RUNTIME_CONFIG=y
-CONFIG_MMC_OMAP_HS=y
-CONFIG_CONS_INDEX=3
-CONFIG_SYS_NS16550=y
-CONFIG_SPI=y
-CONFIG_OMAP3_SPI=y
-CONFIG_USB=y
-CONFIG_USB_EHCI_HCD=y
-CONFIG_USB_MUSB_UDC=y
-CONFIG_USB_OMAP3=y
-CONFIG_USB_GADGET=y
-CONFIG_USB_HOST_ETHER=y
-CONFIG_USB_ETHER_SMSC95XX=y
-CONFIG_OF_LIBFDT=y
diff --git a/include/configs/omap4_panda.h b/include/configs/omap4_panda.h
deleted file mode 100644
index 835b7c299e..0000000000
--- a/include/configs/omap4_panda.h
+++ /dev/null
@@ -1,34 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0+ */
-/*
- * (C) Copyright 2010
- * Texas Instruments Incorporated.
- * Steve Sakoman <steve at sakoman.com>
- *
- * Configuration settings for the TI OMAP4 Panda board.
- * See ti_omap4_common.h for OMAP4 common part
- */
-
-#ifndef __CONFIG_PANDA_H
-#define __CONFIG_PANDA_H
-
-/*
- * High Level Configuration Options
- */
-
-/* USB UHH support options */
-#define CONFIG_OMAP_EHCI_PHY1_RESET_GPIO 1
-#define CONFIG_OMAP_EHCI_PHY2_RESET_GPIO 62
-
-/* USB Networking options */
-
-#define CONFIG_UBOOT_ENABLE_PADS_ALL
-
-#include <configs/ti_omap4_common.h>
-
-/* GPIO */
-
-/* ENV related config options */
-
-#define CONFIG_ENV_OVERWRITE
-
-#endif /* __CONFIG_PANDA_H */
--
2.25.1
More information about the U-Boot
mailing list