[PATCH 1/2] imx: imx8mp_evk: fix boot issue

[Fabio Estevam]

Hi Peng,

On Mon, May 11, 2020 at 2:55 AM Peng Fan <peng.fan at nxp.com> wrote:
>
> The u-boot-spl.bin pad with ddr firmware conflicts with the
> CONFIG_MALLOC_F_ADDR area, the ddr firmware will be overwritten
> by malloc in SPL stage and cause ddr initialization not able
> to finish. So update the related addresses to fix the issue.
>
> Reported-by: Fabio Estevam <festevam at gmail.com>
> Signed-off-by: Peng Fan <peng.fan at nxp.com>
> ---
>  include/configs/imx8mp_evk.h | 8 ++++----
>  1 file changed, 4 insertions(+), 4 deletions(-)
>
> diff --git a/include/configs/imx8mp_evk.h b/include/configs/imx8mp_evk.h
> index 80e5738961..b90a4f6932 100644
> --- a/include/configs/imx8mp_evk.h
> +++ b/include/configs/imx8mp_evk.h
> @@ -23,15 +23,15 @@
>  #ifdef CONFIG_SPL_BUILD
>  /*#define CONFIG_ENABLE_DDR_TRAINING_DEBUG*/
>  #define CONFIG_SPL_LDSCRIPT            "arch/arm/cpu/armv8/u-boot-spl.lds"
> -#define CONFIG_SPL_STACK               0x990000
> -#define CONFIG_SPL_BSS_START_ADDR      0x0095e000
> -#define CONFIG_SPL_BSS_MAX_SIZE        0x2000  /* 8 KB */
> +#define CONFIG_SPL_STACK               0x98fc00

On imx6/imx7 we have this kind of SPL information placed in the SoC
related header files:

include/configs/imx6_spl.h
include/configs/imx7_spl.h

We should do the same here instead of repeating these SPL settings in
every board header file.

Thanks