raspberrypi cm3 v2019.07 not working

[Belisko Marek]

On Fri, May 8, 2020 at 11:39 PM Belisko Marek <marek.belisko at gmail.com> wrote:
>
> Hi Matthias,
>
> On Fri, May 8, 2020 at 11:28 PM Matthias Brugger <mbrugger at suse.com> wrote:
> >
> > Hi Marek,
> >
> > On 08/05/2020 21:52, Belisko Marek wrote:
> > > On Wed, May 6, 2020 at 11:02 PM Belisko Marek <marek.belisko at gmail.com> wrote:
> > >>
> > >> On Tue, May 5, 2020 at 10:18 PM Belisko Marek <marek.belisko at gmail.com> wrote:
> > >>>
> > >>> Hi,
> > >>>
> > >>> I'm trying to run 2019.07 u-boot on raspberrypi cm3 module but I got
> > >>> no feedback on console. When used 2018.01 it boots fine. Probably I
> > >>> need to do git bisect but maybe someone have some idea or experience
> > >>> what can cause that. Thanks.
> > >> I give a try 2020.01 and I got only this:
> > >> U-Boot 2020.01 (May 06 2020 - 20:09:45 +0000)
> > >>
> > >> DRAM:  948 MiB
> > >> RPI Compute Module 3 (0xa020a0)
> > >>
> > >> I'll try to debug it and let you know.
> > > Debug messages shows this:
> > > https://pastebin.com/2SwNzrb1
> > >
> > > I tried to debug but I have no clue what is going one there.
> > >
> > > Also u-boot 2019.07 is not working at all on cm3 due to this commit
> > > (after bisect when reverted u-boot start working again):
> > > 143256b353c4d2ad1cf5e5e63b38410188b35e49 - fdt: update bcm283x device
> > > tree sources to Linux 5.1-rc6 state
> > >
> > > Any ideas hint how to resolve this issue? Thanks.
> > >
> >
> > Can you try to cherry-pick the following two patches to your tree:
> > 5051377a0b ("arm: dts: bcm283x: Rename U-Boot file")
> > 89e47e8eb6 ("fdt: fix bcm283x dm-pre-reloc definitions")
> But those are present in 2020.01 and this version at least print
> something to console but stuck somewhere (pls see pastebin log with
> debug enabled)
> I prefer to run 2020.01 ;). Thanks.
Any other stuff I can try to make it working in 2020.01? Could that be
firmware issue somehow? Thanks.
> >
> > Regards,
> > Matthias
>
> BR,
>
> marek

BR,

marek