raspberrypi cm3 v2019.07 not working

[Matthias Brugger]

On 12/05/2020 11:15, Belisko Marek wrote:
> On Fri, May 8, 2020 at 11:39 PM Belisko Marek <marek.belisko at gmail.com> wrote:
>>
>> Hi Matthias,
>>
>> On Fri, May 8, 2020 at 11:28 PM Matthias Brugger <mbrugger at suse.com> wrote:
>>>
>>> Hi Marek,
>>>
>>> On 08/05/2020 21:52, Belisko Marek wrote:
>>>> On Wed, May 6, 2020 at 11:02 PM Belisko Marek <marek.belisko at gmail.com> wrote:
>>>>>
>>>>> On Tue, May 5, 2020 at 10:18 PM Belisko Marek <marek.belisko at gmail.com> wrote:
>>>>>>
>>>>>> Hi,
>>>>>>
>>>>>> I'm trying to run 2019.07 u-boot on raspberrypi cm3 module but I got
>>>>>> no feedback on console. When used 2018.01 it boots fine. Probably I
>>>>>> need to do git bisect but maybe someone have some idea or experience
>>>>>> what can cause that. Thanks.
>>>>> I give a try 2020.01 and I got only this:
>>>>> U-Boot 2020.01 (May 06 2020 - 20:09:45 +0000)
>>>>>
>>>>> DRAM:  948 MiB
>>>>> RPI Compute Module 3 (0xa020a0)
>>>>>
>>>>> I'll try to debug it and let you know.
>>>> Debug messages shows this:
>>>> https://pastebin.com/2SwNzrb1
>>>>
>>>> I tried to debug but I have no clue what is going one there.
>>>>
>>>> Also u-boot 2019.07 is not working at all on cm3 due to this commit
>>>> (after bisect when reverted u-boot start working again):
>>>> 143256b353c4d2ad1cf5e5e63b38410188b35e49 - fdt: update bcm283x device
>>>> tree sources to Linux 5.1-rc6 state
>>>>
>>>> Any ideas hint how to resolve this issue? Thanks.
>>>>
>>>
>>> Can you try to cherry-pick the following two patches to your tree:
>>> 5051377a0b ("arm: dts: bcm283x: Rename U-Boot file")
>>> 89e47e8eb6 ("fdt: fix bcm283x dm-pre-reloc definitions")
>> But those are present in 2020.01 and this version at least print
>> something to console but stuck somewhere (pls see pastebin log with
>> debug enabled)
>> I prefer to run 2020.01 ;). Thanks.
> Any other stuff I can try to make it working in 2020.01? Could that be
> firmware issue somehow? Thanks.

Sorry I didn't realized that your first try was with 2020.01.
I just confirmed that it acutually does not boot. As a shortcut, do you know
which is the last working version of U-Boot?

Regards,
Matthias