[PATCH 00/11] stm32mp1: migrate MTD and DFU configuration in Kconfig

Patrick DELAUNAY patrick.delaunay at st.com
Thu May 14 11:26:17 CEST 2020


Hi,

> From: Patrick DELAUNAY <patrick.delaunay at st.com>
> Sent: mercredi 18 mars 2020 09:23
> 
> 
> This serie migrate the dynamically build MTD
> (CONFIG_SYS_MTDPARTS_RUNTIME) and the DFU configuration
> (CONFIG_SET_DFU_ALT_INFO) previously based on ENV variables to
> CONFIG_.
> 
> These patches reduce the size of the environment and allow to tune for each
> target with a specific defconfig file.
> 
> This serie also removes the TEE deconfig, replaced by a dynamic detection
> based on op-tee driver probe.
> 
> This serie depends on previous CONFIG migration proposed in
> http://patchwork.ozlabs.org/project/uboot/list/?series=160899
> - configs: migrate CONFIG_SET_DFU_ALT_INFO to defconfigs
> - configs: migrate CONFIG_SYS_MTDPARTS_RUNTIME to defconfigs
> 
> 
> 
> Patrick Delaunay (11):
>   board: stm32mp1: move board_get_mtdparts in st common directory
>   board: stm32mp1: move set_dfu_alt_info in st common directory
>   stm32mp1: dynamically build DFU_ALT_INFO
>   stm32mp1: move MTDPART configuration in Kconfig
>   board: stm32mp1: reserve memory for OP-TEE in device tree
>   stm32mp1: dynamically detect op-tee presence
>   board: stm32mp1: use FDT address provided by TF-A at boot time
>   configs: stm32mp1: remove optee defconfig
>   board: stm32mp1: support boot from spi-nand
>   board: stm32mp1: adapt MTD partition for BOOT from NOR or NAND
>   doc: stm32mp1: update DFU support example
> 
>  arch/arm/dts/stm32mp157a-dk1.dts           |   5 +
>  arch/arm/dts/stm32mp157c-ed1.dts           |   5 +
>  arch/arm/mach-stm32mp/Kconfig              |  10 -
>  arch/arm/mach-stm32mp/Makefile             |   1 +
>  arch/arm/mach-stm32mp/boot_params.c        |  45 ++++
>  arch/arm/mach-stm32mp/cpu.c                |   4 +
>  arch/arm/mach-stm32mp/dram_init.c          |  18 ++
>  arch/arm/mach-stm32mp/fdt.c                |  25 ++
>  arch/arm/mach-stm32mp/include/mach/stm32.h |   3 +
>  arch/arm/mach-stm32mp/spl.c                |   2 +
>  board/dhelectronics/dh_stm32mp1/Kconfig    |   1 +
>  board/dhelectronics/dh_stm32mp1/Makefile   |   3 +
>  board/dhelectronics/dh_stm32mp1/board.c    | 143 +-----------
>  board/st/common/Kconfig                    |  64 ++++++
>  board/st/common/Makefile                   |   5 +
>  board/st/common/stm32mp_dfu.c              | 225 ++++++++++++++++++
>  board/st/common/stm32mp_mtdparts.c         | 157 +++++++++++++
>  board/st/stm32mp1/MAINTAINERS              |   1 -
>  board/st/stm32mp1/stm32mp1.c               | 253 +--------------------
>  configs/stm32mp15_optee_defconfig          | 132 -----------
>  configs/stm32mp15_trusted_defconfig        |   3 +
>  doc/board/st/stm32mp1.rst                  | 147 +++++-------
>  include/configs/stm32mp1.h                 |  64 +-----
>  23 files changed, 634 insertions(+), 682 deletions(-)  create mode 100644
> arch/arm/mach-stm32mp/boot_params.c
>  create mode 100644 board/st/common/stm32mp_dfu.c  create mode 100644
> board/st/common/stm32mp_mtdparts.c
>  delete mode 100644 configs/stm32mp15_optee_defconfig
> 
> --
> 2.17.1

For the serie applied to u-boot-stm/master, thanks!

Regards

Patrick


More information about the U-Boot mailing list