[PATCH] ARM: imx: soc: Add reset for non-DM case

[Marek Vasut]

This is another in series of patches which remove ad-hoc reset_cpu()
hacks from board files. This one is for iMX7, so implement default
reset_cpu() there to prevent it from showing up in board files.

Signed-off-by: Marek Vasut <marex at denx.de>
Cc: Fabio Estevam <festevam at gmail.com>
Cc: NXP i.MX U-Boot Team <uboot-imx at nxp.com>
Cc: Peng Fan <peng.fan at nxp.com>
Cc: Stefano Babic <sbabic at denx.de>
---
 arch/arm/mach-imx/mx7/soc.c | 13 +++++++++++++
 1 file changed, 13 insertions(+)

diff --git a/arch/arm/mach-imx/mx7/soc.c b/arch/arm/mach-imx/mx7/soc.c
index 798fe74a3d..e7c71dfe8e 100644
--- a/arch/arm/mach-imx/mx7/soc.c
+++ b/arch/arm/mach-imx/mx7/soc.c
@@ -18,6 +18,7 @@
 #include <env.h>
 #include <imx_thermal.h>
 #include <fsl_sec.h>
+#include <fsl_wdog.h>
 #include <asm/setup.h>
 #include <linux/delay.h>
 
@@ -419,3 +420,15 @@ void reset_misc(void)
 #endif
 }
 
+#if !CONFIG_IS_ENABLED(SYSRESET)
+void reset_cpu(ulong addr)
+{
+	struct watchdog_regs *wdog = (struct watchdog_regs *)WDOG1_BASE_ADDR;
+
+	/* Clear WDA to trigger WDOG_B immediately */
+	writew(SET_WCR_WT(1) | WCR_WDT | WCR_WDE | WCR_SRS, &wdog->wcr);
+
+	while (1)
+		;
+}
+#endif
-- 
2.25.1