[PATCH v2 1/3] board: ls2080aqds: transition to DM_ETH

[Priyanka Jain]

>-----Original Message-----
>From: Ioana Ciornei <ioana.ciornei at nxp.com>
>Sent: Friday, May 15, 2020 12:27 PM
>To: Priyanka Jain <priyanka.jain at nxp.com>; u-boot at lists.denx.de
>Cc: Ioana Ciornei <ioana.ciornei at nxp.com>
>Subject: [PATCH v2 1/3] board: ls2080aqds: transition to DM_ETH
>
>In case CONFIG_DM_ETH is enabled, no hardcoding is necessary for DPAA2
>Ethernet devices. Compile out any unnecessary setup when CONFIG_DM_ETH
>is activated.  Also, force the PCI devices to be enumerated at probe time.
>
>Signed-off-by: Ioana Ciornei <ioana.ciornei at nxp.com>
>---
> board/freescale/ls2080aqds/eth.c        | 13 +++++++++++--
> board/freescale/ls2080aqds/ls2080aqds.c |  4 ++++
> 2 files changed, 15 insertions(+), 2 deletions(-)
>
>diff --git a/board/freescale/ls2080aqds/eth.c
>b/board/freescale/ls2080aqds/eth.c
>index bbb70a859a1e..47f57d94b847 100644
>--- a/board/freescale/ls2080aqds/eth.c
>+++ b/board/freescale/ls2080aqds/eth.c
>@@ -24,6 +24,8 @@
>
> #define MC_BOOT_ENV_VAR "mcinitcmd"
>
>+#ifndef CONFIG_DM_ETH
>+
> #if defined(CONFIG_FSL_MC_ENET) && !defined(CONFIG_SPL_BUILD)
>  /* - In LS2080A there are only 16 SERDES lanes, spread across 2 SERDES
>banks.
>  *   Bank 1 -> Lanes A, B, C, D, E, F, G, H
>@@ -889,9 +891,11 @@ void ls2080a_handle_phy_interface_xsgmii(int i)
> 	}
> }
> #endif
>+#endif // !CONFIG_DM_ETH
>
> int board_eth_init(bd_t *bis)
> {
>+#ifndef CONFIG_DM_ETH
> 	int error;
> #if defined(CONFIG_FSL_MC_ENET) && !defined(CONFIG_SPL_BUILD)
> 	struct ccsr_gur __iomem *gur = (void *)CONFIG_SYS_FSL_GUTS_ADDR;
>@@ -970,8 +974,13 @@ int board_eth_init(bd_t *bis)
> 			sgmii_configure_repeater(2);
> 	}
> #endif
>-	error = pci_eth_init(bis);
>-	return error;
>+#endif // !CONFIG_DM_ETH
>+
>+#ifdef CONFIG_DM_ETH
>+	return 0;
>+#else
>+	return pci_eth_init(bis);
>+#endif
> }
>
> #if defined(CONFIG_RESET_PHY_R)
>diff --git a/board/freescale/ls2080aqds/ls2080aqds.c
>b/board/freescale/ls2080aqds/ls2080aqds.c
>index 4034bdee2842..1c91c5b7f052 100644
>--- a/board/freescale/ls2080aqds/ls2080aqds.c
>+++ b/board/freescale/ls2080aqds/ls2080aqds.c
>@@ -251,6 +251,10 @@ int board_init(void)
> 	ppa_init();
> #endif
>
>+#if !defined(CONFIG_SYS_EARLY_PCI_INIT) && defined(CONFIG_DM_ETH)
>+	pci_init();
>+#endif
>+
> 	return 0;
> }
>
>--
>2.17.1
Please fix below build warning: 

-(ls2080aqds_nand ls2080aqds_sdcard)   int error;
-(ls2080aqds_nand ls2080aqds_sdcard)       ^~~~~
w-(ls2080aqds_nand ls2080aqds_sdcard) ../board/freescale/ls2080aqds/eth.c: In function â board_eth_initâ :
w-(ls2080aqds_nand ls2080aqds_sdcard) ../board/freescale/ls2080aqds/eth.c:899:6: warning: unused variable â errorâ  [-Wunused-variable]

Regards
Priyanka