[PATCH v2 15/23] ti: Drop panda board

Jagan Teki jagan at amarulasolutions.com
Wed May 27 14:56:29 CEST 2020


DM, DM_SPI and other driver model migration deadlines
are expired for this board.

Drop it.

Cc: Lokesh Vutla <lokeshvutla at ti.com>
Signed-off-by: Jagan Teki <jagan at amarulasolutions.com>
---
Changes for v2:
- none

 arch/arm/mach-omap2/omap4/Kconfig |   4 -
 board/ti/panda/Kconfig            |  12 --
 board/ti/panda/MAINTAINERS        |   6 -
 board/ti/panda/Makefile           |   6 -
 board/ti/panda/panda.c            | 346 ------------------------------
 board/ti/panda/panda_mux_data.h   |  86 --------
 configs/omap4_panda_defconfig     |  42 ----
 include/configs/omap4_panda.h     |  34 ---
 8 files changed, 536 deletions(-)
 delete mode 100644 board/ti/panda/Kconfig
 delete mode 100644 board/ti/panda/MAINTAINERS
 delete mode 100644 board/ti/panda/Makefile
 delete mode 100644 board/ti/panda/panda.c
 delete mode 100644 board/ti/panda/panda_mux_data.h
 delete mode 100644 configs/omap4_panda_defconfig
 delete mode 100644 include/configs/omap4_panda.h

diff --git a/arch/arm/mach-omap2/omap4/Kconfig b/arch/arm/mach-omap2/omap4/Kconfig
index 899289b645..4cc360f38a 100644
--- a/arch/arm/mach-omap2/omap4/Kconfig
+++ b/arch/arm/mach-omap2/omap4/Kconfig
@@ -4,9 +4,6 @@ choice
 	prompt "OMAP4 board select"
 	optional
 
-config TARGET_OMAP4_PANDA
-	bool "TI OMAP4 PandaBoard"
-
 config TARGET_OMAP4_SDP4430
 	bool "TI OMAP4 SDP4430"
 
@@ -18,7 +15,6 @@ endchoice
 config SYS_SOC
 	default "omap4"
 
-source "board/ti/panda/Kconfig"
 source "board/ti/sdp4430/Kconfig"
 source "board/amazon/kc1/Kconfig"
 
diff --git a/board/ti/panda/Kconfig b/board/ti/panda/Kconfig
deleted file mode 100644
index 8f277b612a..0000000000
--- a/board/ti/panda/Kconfig
+++ /dev/null
@@ -1,12 +0,0 @@
-if TARGET_OMAP4_PANDA
-
-config SYS_BOARD
-	default "panda"
-
-config SYS_VENDOR
-	default "ti"
-
-config SYS_CONFIG_NAME
-	default "omap4_panda"
-
-endif
diff --git a/board/ti/panda/MAINTAINERS b/board/ti/panda/MAINTAINERS
deleted file mode 100644
index 2142368271..0000000000
--- a/board/ti/panda/MAINTAINERS
+++ /dev/null
@@ -1,6 +0,0 @@
-PANDA BOARD
-M:	Lokesh Vutla <lokeshvutla at ti.com>
-S:	Maintained
-F:	board/ti/panda/
-F:	include/configs/omap4_panda.h
-F:	configs/omap4_panda_defconfig
diff --git a/board/ti/panda/Makefile b/board/ti/panda/Makefile
deleted file mode 100644
index dd2ff33afa..0000000000
--- a/board/ti/panda/Makefile
+++ /dev/null
@@ -1,6 +0,0 @@
-# SPDX-License-Identifier: GPL-2.0+
-#
-# (C) Copyright 2000, 2001, 2002
-# Wolfgang Denk, DENX Software Engineering, wd at denx.de.
-
-obj-y	:= panda.o
diff --git a/board/ti/panda/panda.c b/board/ti/panda/panda.c
deleted file mode 100644
index 9ebecfdbf5..0000000000
--- a/board/ti/panda/panda.c
+++ /dev/null
@@ -1,346 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0+
-/*
- * (C) Copyright 2010
- * Texas Instruments Incorporated, <www.ti.com>
- * Steve Sakoman  <steve at sakoman.com>
- */
-#include <common.h>
-#include <init.h>
-#include <log.h>
-#include <net.h>
-#include <asm/mach-types.h>
-#include <asm/arch/sys_proto.h>
-#include <asm/arch/mmc_host_def.h>
-#include <asm/arch/clock.h>
-#include <asm/arch/gpio.h>
-#include <asm/gpio.h>
-#include <env.h>
-#include <twl6030.h>
-
-#include "panda_mux_data.h"
-
-#ifdef CONFIG_USB_EHCI_HCD
-#include <usb.h>
-#include <asm/arch/ehci.h>
-#include <asm/ehci-omap.h>
-#endif
-
-#define PANDA_ULPI_PHY_TYPE_GPIO       182
-#define PANDA_BOARD_ID_1_GPIO          101
-#define PANDA_ES_BOARD_ID_1_GPIO        48
-#define PANDA_BOARD_ID_2_GPIO          171
-#define PANDA_ES_BOARD_ID_3_GPIO         3
-#define PANDA_ES_BOARD_ID_4_GPIO         2
-
-DECLARE_GLOBAL_DATA_PTR;
-
-const struct omap_sysinfo sysinfo = {
-	"Board: OMAP4 Panda\n"
-};
-
-struct omap4_scrm_regs *const scrm = (struct omap4_scrm_regs *)0x4a30a000;
-
-/**
- * @brief board_init
- *
- * @return 0
- */
-int board_init(void)
-{
-	gpmc_init();
-
-	gd->bd->bi_arch_number = MACH_TYPE_OMAP4_PANDA;
-	gd->bd->bi_boot_params = (0x80000000 + 0x100); /* boot param addr */
-
-	return 0;
-}
-
-int board_eth_init(bd_t *bis)
-{
-	return 0;
-}
-
-/*
-* Routine: get_board_revision
-* Description: Detect if we are running on a panda revision A1-A6,
-*              or an ES panda board. This can be done by reading
-*              the level of GPIOs and checking the processor revisions.
-*              This should result in:
-*			Panda 4430:
-*              GPIO171, GPIO101, GPIO182: 0 1 1 => A1-A5
-*              GPIO171, GPIO101, GPIO182: 1 0 1 => A6
-*			Panda ES:
-*              GPIO2, GPIO3, GPIO171, GPIO48, GPIO182: 0 0 0 1 1 => B1/B2
-*              GPIO2, GPIO3, GPIO171, GPIO48, GPIO182: 0 0 1 1 1 => B3
-*/
-int get_board_revision(void)
-{
-	int board_id0, board_id1, board_id2;
-	int board_id3, board_id4;
-	int board_id;
-
-	int processor_rev = omap_revision();
-
-	/* Setup the mux for the common board ID pins (gpio 171 and 182) */
-	writew((IEN | M3), (*ctrl)->control_padconf_core_base + UNIPRO_TX0);
-	writew((IEN | M3), (*ctrl)->control_padconf_core_base + FREF_CLK2_OUT);
-
-	board_id0 = gpio_get_value(PANDA_ULPI_PHY_TYPE_GPIO);
-	board_id2 = gpio_get_value(PANDA_BOARD_ID_2_GPIO);
-
-	if ((processor_rev >= OMAP4460_ES1_0 &&
-	     processor_rev <= OMAP4460_ES1_1)) {
-		/*
-		 * Setup the mux for the ES specific board ID pins (gpio 101,
-		 * 2 and 3.
-		 */
-		writew((IEN | M3), (*ctrl)->control_padconf_core_base +
-				GPMC_A24);
-		writew((IEN | M3), (*ctrl)->control_padconf_core_base +
-				UNIPRO_RY0);
-		writew((IEN | M3), (*ctrl)->control_padconf_core_base +
-				UNIPRO_RX1);
-
-		board_id1 = gpio_get_value(PANDA_ES_BOARD_ID_1_GPIO);
-		board_id3 = gpio_get_value(PANDA_ES_BOARD_ID_3_GPIO);
-		board_id4 = gpio_get_value(PANDA_ES_BOARD_ID_4_GPIO);
-
-#ifdef CONFIG_ENV_VARS_UBOOT_RUNTIME_CONFIG
-		env_set("board_name", "panda-es");
-#endif
-		board_id = ((board_id4 << 4) | (board_id3 << 3) |
-			(board_id2 << 2) | (board_id1 << 1) | (board_id0));
-	} else {
-		/* Setup the mux for the Ax specific board ID pins (gpio 101) */
-		writew((IEN | M3), (*ctrl)->control_padconf_core_base +
-				FREF_CLK2_OUT);
-
-		board_id1 = gpio_get_value(PANDA_BOARD_ID_1_GPIO);
-		board_id = ((board_id2 << 2) | (board_id1 << 1) | (board_id0));
-
-#ifdef CONFIG_ENV_VARS_UBOOT_RUNTIME_CONFIG
-		if ((board_id >= 0x3) && (processor_rev == OMAP4430_ES2_3))
-			env_set("board_name", "panda-a4");
-#endif
-	}
-
-	return board_id;
-}
-
-/**
- * is_panda_es_rev_b3() - Detect if we are running on rev B3 of panda board ES
- *
- *
- * Detect if we are running on B3 version of ES panda board,
- * This can be done by reading the level of GPIO 171 and checking the
- * processor revisions.
- * GPIO171: 1 => Panda ES Rev B3
- *
- * Return : return 1 if Panda ES Rev B3 , else return 0
- */
-u8 is_panda_es_rev_b3(void)
-{
-        int processor_rev = omap_revision();
-        int ret = 0;
-
-        if ((processor_rev >= OMAP4460_ES1_0 &&
-             processor_rev <= OMAP4460_ES1_1)) {
-
-                /* Setup the mux for the common board ID pins (gpio 171) */
-                writew((IEN | M3),
-			(*ctrl)->control_padconf_core_base + UNIPRO_TX0);
-
-                /* if processor_rev is panda ES and GPIO171 is 1,it is rev b3 */
-                ret = gpio_get_value(PANDA_BOARD_ID_2_GPIO);
-        }
-        return ret;
-}
-
-#ifdef CONFIG_SYS_EMIF_PRECALCULATED_TIMING_REGS
-/*
- * emif_get_reg_dump() - emif_get_reg_dump strong function
- *
- * @emif_nr - emif base
- * @regs - reg dump of timing values
- *
- * Strong function to override emif_get_reg_dump weak function in sdram_elpida.c
- */
-void emif_get_reg_dump(u32 emif_nr, const struct emif_regs **regs)
-{
-	u32 omap4_rev = omap_revision();
-
-	/* Same devices and geometry on both EMIFs */
-	if (omap4_rev == OMAP4430_ES1_0)
-		*regs = &emif_regs_elpida_380_mhz_1cs;
-	else if (omap4_rev == OMAP4430_ES2_0)
-		*regs = &emif_regs_elpida_200_mhz_2cs;
-	else if (omap4_rev == OMAP4430_ES2_3)
-		*regs = &emif_regs_elpida_400_mhz_1cs;
-	else if (omap4_rev < OMAP4470_ES1_0) {
-		if(is_panda_es_rev_b3())
-			*regs = &emif_regs_elpida_400_mhz_1cs;
-		else
-			*regs = &emif_regs_elpida_400_mhz_2cs;
-	}
-	else
-		*regs = &emif_regs_elpida_400_mhz_1cs;
-}
-
-void emif_get_dmm_regs(const struct dmm_lisa_map_regs
-						**dmm_lisa_regs)
-{
-	u32 omap_rev = omap_revision();
-
-	if (omap_rev == OMAP4430_ES1_0)
-		*dmm_lisa_regs = &lisa_map_2G_x_1_x_2;
-	else if (omap_rev == OMAP4430_ES2_3)
-		*dmm_lisa_regs = &lisa_map_2G_x_2_x_2;
-	else if (omap_rev < OMAP4460_ES1_0)
-		*dmm_lisa_regs = &lisa_map_2G_x_2_x_2;
-	else
-		*dmm_lisa_regs = &ma_lisa_map_2G_x_2_x_2;
-}
-
-#endif
-
-/**
- * @brief misc_init_r - Configure Panda board specific configurations
- * such as power configurations, ethernet initialization as phase2 of
- * boot sequence
- *
- * @return 0
- */
-int misc_init_r(void)
-{
-	int phy_type;
-	u32 auxclk, altclksrc;
-
-	/* EHCI is not supported on ES1.0 */
-	if (omap_revision() == OMAP4430_ES1_0)
-		return 0;
-
-	get_board_revision();
-
-	gpio_direction_input(PANDA_ULPI_PHY_TYPE_GPIO);
-	phy_type = gpio_get_value(PANDA_ULPI_PHY_TYPE_GPIO);
-
-	if (phy_type == 1) {
-		/* ULPI PHY supplied by auxclk3 derived from sys_clk */
-		debug("ULPI PHY supplied by auxclk3\n");
-
-		auxclk = readl(&scrm->auxclk3);
-		/* Select sys_clk */
-		auxclk &= ~AUXCLK_SRCSELECT_MASK;
-		auxclk |=  AUXCLK_SRCSELECT_SYS_CLK << AUXCLK_SRCSELECT_SHIFT;
-		/* Set the divisor to 2 */
-		auxclk &= ~AUXCLK_CLKDIV_MASK;
-		auxclk |= AUXCLK_CLKDIV_2 << AUXCLK_CLKDIV_SHIFT;
-		/* Request auxilary clock #3 */
-		auxclk |= AUXCLK_ENABLE_MASK;
-
-		writel(auxclk, &scrm->auxclk3);
-	} else {
-		/* ULPI PHY supplied by auxclk1 derived from PER dpll */
-		debug("ULPI PHY supplied by auxclk1\n");
-
-		auxclk = readl(&scrm->auxclk1);
-		/* Select per DPLL */
-		auxclk &= ~AUXCLK_SRCSELECT_MASK;
-		auxclk |=  AUXCLK_SRCSELECT_PER_DPLL << AUXCLK_SRCSELECT_SHIFT;
-		/* Set the divisor to 16 */
-		auxclk &= ~AUXCLK_CLKDIV_MASK;
-		auxclk |= AUXCLK_CLKDIV_16 << AUXCLK_CLKDIV_SHIFT;
-		/* Request auxilary clock #3 */
-		auxclk |= AUXCLK_ENABLE_MASK;
-
-		writel(auxclk, &scrm->auxclk1);
-	}
-
-	altclksrc = readl(&scrm->altclksrc);
-
-	/* Activate alternate system clock supplier */
-	altclksrc &= ~ALTCLKSRC_MODE_MASK;
-	altclksrc |= ALTCLKSRC_MODE_ACTIVE;
-
-	/* enable clocks */
-	altclksrc |= ALTCLKSRC_ENABLE_INT_MASK | ALTCLKSRC_ENABLE_EXT_MASK;
-
-	writel(altclksrc, &scrm->altclksrc);
-
-	omap_die_id_usbethaddr();
-
-	return 0;
-}
-
-void set_muxconf_regs(void)
-{
-	do_set_mux((*ctrl)->control_padconf_core_base,
-		   core_padconf_array_essential,
-		   sizeof(core_padconf_array_essential) /
-		   sizeof(struct pad_conf_entry));
-
-	do_set_mux((*ctrl)->control_padconf_wkup_base,
-		   wkup_padconf_array_essential,
-		   sizeof(wkup_padconf_array_essential) /
-		   sizeof(struct pad_conf_entry));
-
-	if (omap_revision() >= OMAP4460_ES1_0)
-		do_set_mux((*ctrl)->control_padconf_wkup_base,
-			   wkup_padconf_array_essential_4460,
-			   sizeof(wkup_padconf_array_essential_4460) /
-			   sizeof(struct pad_conf_entry));
-}
-
-#if defined(CONFIG_MMC)
-int board_mmc_init(bd_t *bis)
-{
-	return omap_mmc_init(0, 0, 0, -1, -1);
-}
-
-#if !defined(CONFIG_SPL_BUILD)
-void board_mmc_power_init(void)
-{
-	twl6030_power_mmc_init(0);
-}
-#endif
-#endif
-
-#ifdef CONFIG_USB_EHCI_HCD
-
-static struct omap_usbhs_board_data usbhs_bdata = {
-	.port_mode[0] = OMAP_EHCI_PORT_MODE_PHY,
-	.port_mode[1] = OMAP_USBHS_PORT_MODE_UNUSED,
-	.port_mode[2] = OMAP_USBHS_PORT_MODE_UNUSED,
-};
-
-int ehci_hcd_init(int index, enum usb_init_type init,
-		struct ehci_hccr **hccr, struct ehci_hcor **hcor)
-{
-	int ret;
-	unsigned int utmi_clk;
-
-	/* Now we can enable our port clocks */
-	utmi_clk = readl((void *)CM_L3INIT_HSUSBHOST_CLKCTRL);
-	utmi_clk |= HSUSBHOST_CLKCTRL_CLKSEL_UTMI_P1_MASK;
-	setbits_le32((void *)CM_L3INIT_HSUSBHOST_CLKCTRL, utmi_clk);
-
-	ret = omap_ehci_hcd_init(index, &usbhs_bdata, hccr, hcor);
-	if (ret < 0)
-		return ret;
-
-	return 0;
-}
-
-int ehci_hcd_stop(int index)
-{
-	return omap_ehci_hcd_stop();
-}
-#endif
-
-/*
- * get_board_rev() - get board revision
- */
-u32 get_board_rev(void)
-{
-	return 0x20;
-}
diff --git a/board/ti/panda/panda_mux_data.h b/board/ti/panda/panda_mux_data.h
deleted file mode 100644
index ad9e36525b..0000000000
--- a/board/ti/panda/panda_mux_data.h
+++ /dev/null
@@ -1,86 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0+ */
-/*
- * (C) Copyright 2010
- * Texas Instruments Incorporated, <www.ti.com>
- *
- *	Balaji Krishnamoorthy	<balajitk at ti.com>
- *	Aneesh V		<aneesh at ti.com>
- */
-#ifndef _PANDA_MUX_DATA_H_
-#define _PANDA_MUX_DATA_H_
-
-#include <asm/arch/mux_omap4.h>
-
-
-const struct pad_conf_entry core_padconf_array_essential[] = {
-
-{GPMC_AD0, (PTU | IEN | OFF_EN | OFF_PD | OFF_IN | M1)}, /* sdmmc2_dat0 */
-{GPMC_AD1, (PTU | IEN | OFF_EN | OFF_PD | OFF_IN | M1)}, /* sdmmc2_dat1 */
-{GPMC_AD2, (PTU | IEN | OFF_EN | OFF_PD | OFF_IN | M1)}, /* sdmmc2_dat2 */
-{GPMC_AD3, (PTU | IEN | OFF_EN | OFF_PD | OFF_IN | M1)}, /* sdmmc2_dat3 */
-{GPMC_AD4, (PTU | IEN | OFF_EN | OFF_PD | OFF_IN | M1)}, /* sdmmc2_dat4 */
-{GPMC_AD5, (PTU | IEN | OFF_EN | OFF_PD | OFF_IN | M1)}, /* sdmmc2_dat5 */
-{GPMC_AD6, (PTU | IEN | OFF_EN | OFF_PD | OFF_IN | M1)}, /* sdmmc2_dat6 */
-{GPMC_AD7, (PTU | IEN | OFF_EN | OFF_PD | OFF_IN | M1)}, /* sdmmc2_dat7 */
-{GPMC_NOE, (PTU | IEN | OFF_EN | OFF_OUT_PTD | M1)},	 /* sdmmc2_clk */
-{GPMC_NWE, (PTU | IEN | OFF_EN | OFF_PD | OFF_IN | M1)}, /* sdmmc2_cmd */
-{SDMMC1_CLK, (PTU | OFF_EN | OFF_OUT_PTD | M0)},	 /* sdmmc1_clk */
-{SDMMC1_CMD, (PTU | IEN | OFF_EN | OFF_PD | OFF_IN | M0)}, /* sdmmc1_cmd */
-{SDMMC1_DAT0, (PTU | IEN | OFF_EN | OFF_PD | OFF_IN | M0)}, /* sdmmc1_dat0 */
-{SDMMC1_DAT1, (PTU | IEN | OFF_EN | OFF_PD | OFF_IN | M0)}, /* sdmmc1_dat1 */
-{SDMMC1_DAT2, (PTU | IEN | OFF_EN | OFF_PD | OFF_IN | M0)}, /* sdmmc1_dat2 */
-{SDMMC1_DAT3, (PTU | IEN | OFF_EN | OFF_PD | OFF_IN | M0)}, /* sdmmc1_dat3 */
-{SDMMC1_DAT4, (PTU | IEN | OFF_EN | OFF_PD | OFF_IN | M0)}, /* sdmmc1_dat4 */
-{SDMMC1_DAT5, (PTU | IEN | OFF_EN | OFF_PD | OFF_IN | M0)}, /* sdmmc1_dat5 */
-{SDMMC1_DAT6, (PTU | IEN | OFF_EN | OFF_PD | OFF_IN | M0)}, /* sdmmc1_dat6 */
-{SDMMC1_DAT7, (PTU | IEN | OFF_EN | OFF_PD | OFF_IN | M0)}, /* sdmmc1_dat7 */
-{I2C1_SCL, (PTU | IEN | M0)},				/* i2c1_scl */
-{I2C1_SDA, (PTU | IEN | M0)},				/* i2c1_sda */
-{I2C2_SCL, (PTU | IEN | M0)},				/* i2c2_scl */
-{I2C2_SDA, (PTU | IEN | M0)},				/* i2c2_sda */
-{I2C3_SCL, (PTU | IEN | M0)},				/* i2c3_scl */
-{I2C3_SDA, (PTU | IEN | M0)},				/* i2c3_sda */
-{I2C4_SCL, (PTU | IEN | M0)},				/* i2c4_scl */
-{I2C4_SDA, (PTU | IEN | M0)},				/* i2c4_sda */
-{UART3_CTS_RCTX, (PTU | IEN | M0)},			/* uart3_tx */
-{UART3_RTS_SD, (M0)},					/* uart3_rts_sd */
-{UART3_RX_IRRX, (IEN | M0)},				/* uart3_rx */
-{UART3_TX_IRTX, (M0)},					/* uart3_tx */
-{USBB1_ULPITLL_CLK, (PTD | IEN | OFF_EN | OFF_PD | OFF_IN | M4)},/* usbb1_ulpiphy_clk */
-{USBB1_ULPITLL_STP, (OFF_EN | OFF_OUT_PTD | M4)},		/* usbb1_ulpiphy_stp */
-{USBB1_ULPITLL_DIR, (IEN | OFF_EN | OFF_PD | OFF_IN | M4)},	/* usbb1_ulpiphy_dir */
-{USBB1_ULPITLL_NXT, (IEN | OFF_EN | OFF_PD | OFF_IN | M4)},	/* usbb1_ulpiphy_nxt */
-{USBB1_ULPITLL_DAT0, (IEN | OFF_EN | OFF_PD | OFF_IN | M4)},	/* usbb1_ulpiphy_dat0 */
-{USBB1_ULPITLL_DAT1, (IEN | OFF_EN | OFF_PD | OFF_IN | M4)},	/* usbb1_ulpiphy_dat1 */
-{USBB1_ULPITLL_DAT2, (IEN | OFF_EN | OFF_PD | OFF_IN | M4)},	/* usbb1_ulpiphy_dat2 */
-{USBB1_ULPITLL_DAT3, (IEN | OFF_EN | OFF_PD | OFF_IN | M4)},	/* usbb1_ulpiphy_dat3 */
-{USBB1_ULPITLL_DAT4, (IEN | OFF_EN | OFF_PD | OFF_IN | M4)},	/* usbb1_ulpiphy_dat4 */
-{USBB1_ULPITLL_DAT5, (IEN | OFF_EN | OFF_PD | OFF_IN | M4)},	/* usbb1_ulpiphy_dat5 */
-{USBB1_ULPITLL_DAT6, (IEN | OFF_EN | OFF_PD | OFF_IN | M4)},	/* usbb1_ulpiphy_dat6 */
-{USBB1_ULPITLL_DAT7, (IEN | OFF_EN | OFF_PD | OFF_IN | M4)},	/* usbb1_ulpiphy_dat7 */
-{USBB1_HSIC_DATA, (IEN | OFF_EN | OFF_PD | OFF_IN | M0)},	/* usbb1_hsic_data */
-{USBB1_HSIC_STROBE, (IEN | OFF_EN | OFF_PD | OFF_IN | M0)},	/* usbb1_hsic_strobe */
-{USBC1_ICUSB_DP, (IEN | M0)},					/* usbc1_icusb_dp */
-{USBC1_ICUSB_DM, (IEN | M0)},					/* usbc1_icusb_dm */
-{UNIPRO_TY2, (PTU | IEN | M3)},					/* gpio_1 */
-{GPMC_WAIT1,  (PTD | OFF_EN | OFF_PD | OFF_OUT_PTD | M3)},	/* gpio_62 */
-{FREF_CLK2_OUT, (PTU | IEN | M3)},				/* gpio_182 */
-
-};
-
-const struct pad_conf_entry wkup_padconf_array_essential[] = {
-
-{PAD1_SR_SCL, (PTU | IEN | M0)}, /* sr_scl */
-{PAD0_SR_SDA, (PTU | IEN | M0)}, /* sr_sda */
-{PAD1_SYS_32K, (IEN | M0)},	 /* sys_32k */
-{PAD0_FREF_CLK3_OUT, (M0)}, /* fref_clk3_out */
-
-};
-
-const struct pad_conf_entry wkup_padconf_array_essential_4460[] = {
-
-{PAD1_FREF_CLK4_REQ, (M3)}, /* gpio_wk7 for TPS: Mode 3 */
-
-};
-
-#endif /* _PANDA_MUX_DATA_H_ */
diff --git a/configs/omap4_panda_defconfig b/configs/omap4_panda_defconfig
deleted file mode 100644
index 3ac6319d2d..0000000000
--- a/configs/omap4_panda_defconfig
+++ /dev/null
@@ -1,42 +0,0 @@
-CONFIG_ARM=y
-CONFIG_ARCH_OMAP2PLUS=y
-CONFIG_OMAP44XX=y
-CONFIG_TARGET_OMAP4_PANDA=y
-CONFIG_SPL=y
-CONFIG_SPL_TEXT_BASE=0x40300000
-CONFIG_DISTRO_DEFAULTS=y
-CONFIG_BOOTCOMMAND="if test ${boot_fit} -eq 1; then run update_to_fit; fi; run findfdt; run init_console; run envboot; run distro_bootcmd"
-CONFIG_SYS_CONSOLE_IS_IN_ENV=y
-CONFIG_SYS_CONSOLE_INFO_QUIET=y
-CONFIG_VERSION_VARIABLE=y
-# CONFIG_SPL_FS_EXT4 is not set
-# CONFIG_SPL_I2C_SUPPORT is not set
-# CONFIG_SPL_NAND_SUPPORT is not set
-CONFIG_SPL_OS_BOOT=y
-CONFIG_CMD_SPL=y
-CONFIG_CMD_ASKENV=y
-CONFIG_CMD_GPIO=y
-CONFIG_CMD_I2C=y
-CONFIG_CMD_MMC=y
-CONFIG_CMD_SPI=y
-CONFIG_CMD_USB=y
-# CONFIG_CMD_SETEXPR is not set
-# CONFIG_CMD_NFS is not set
-CONFIG_CMD_EXT4_WRITE=y
-CONFIG_ENV_IS_IN_FAT=y
-CONFIG_ENV_FAT_DEVICE_AND_PART="0:1"
-CONFIG_SYS_RELOC_GD_ENV_ADDR=y
-CONFIG_ENV_VARS_UBOOT_RUNTIME_CONFIG=y
-CONFIG_MMC_OMAP_HS=y
-CONFIG_CONS_INDEX=3
-CONFIG_SYS_NS16550=y
-CONFIG_SPI=y
-CONFIG_OMAP3_SPI=y
-CONFIG_USB=y
-CONFIG_USB_EHCI_HCD=y
-CONFIG_USB_MUSB_UDC=y
-CONFIG_USB_OMAP3=y
-CONFIG_USB_GADGET=y
-CONFIG_USB_HOST_ETHER=y
-CONFIG_USB_ETHER_SMSC95XX=y
-CONFIG_OF_LIBFDT=y
diff --git a/include/configs/omap4_panda.h b/include/configs/omap4_panda.h
deleted file mode 100644
index 835b7c299e..0000000000
--- a/include/configs/omap4_panda.h
+++ /dev/null
@@ -1,34 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0+ */
-/*
- * (C) Copyright 2010
- * Texas Instruments Incorporated.
- * Steve Sakoman  <steve at sakoman.com>
- *
- * Configuration settings for the TI OMAP4 Panda board.
- * See ti_omap4_common.h for OMAP4 common part
- */
-
-#ifndef __CONFIG_PANDA_H
-#define __CONFIG_PANDA_H
-
-/*
- * High Level Configuration Options
- */
-
-/* USB UHH support options */
-#define CONFIG_OMAP_EHCI_PHY1_RESET_GPIO 1
-#define CONFIG_OMAP_EHCI_PHY2_RESET_GPIO 62
-
-/* USB Networking options */
-
-#define CONFIG_UBOOT_ENABLE_PADS_ALL
-
-#include <configs/ti_omap4_common.h>
-
-/* GPIO */
-
-/* ENV related config options */
-
-#define CONFIG_ENV_OVERWRITE
-
-#endif /* __CONFIG_PANDA_H */
-- 
2.25.1



More information about the U-Boot mailing list