[PATCH v2 14/23] gumstix: Drop duovero
Jagan Teki
jagan at amarulasolutions.com
Wed May 27 14:56:28 CEST 2020
DM, DM_SPI and other driver model migration deadlines
are expired for this board.
Drop it.
Cc: Ash Charles <ash at gumstix.com>
Signed-off-by: Jagan Teki <jagan at amarulasolutions.com>
---
Changes for v2:
- Cced board maintainer
arch/arm/mach-omap2/omap4/Kconfig | 4 -
board/gumstix/duovero/Kconfig | 12 -
board/gumstix/duovero/MAINTAINERS | 6 -
board/gumstix/duovero/Makefile | 6 -
board/gumstix/duovero/duovero.c | 273 -----------------------
board/gumstix/duovero/duovero_mux_data.h | 198 ----------------
configs/duovero_defconfig | 42 ----
include/configs/duovero.h | 36 ---
include/configs/ti_omap4_common.h | 2 -
9 files changed, 579 deletions(-)
delete mode 100644 board/gumstix/duovero/Kconfig
delete mode 100644 board/gumstix/duovero/MAINTAINERS
delete mode 100644 board/gumstix/duovero/Makefile
delete mode 100644 board/gumstix/duovero/duovero.c
delete mode 100644 board/gumstix/duovero/duovero_mux_data.h
delete mode 100644 configs/duovero_defconfig
delete mode 100644 include/configs/duovero.h
diff --git a/arch/arm/mach-omap2/omap4/Kconfig b/arch/arm/mach-omap2/omap4/Kconfig
index 49adb8ec5b..899289b645 100644
--- a/arch/arm/mach-omap2/omap4/Kconfig
+++ b/arch/arm/mach-omap2/omap4/Kconfig
@@ -4,9 +4,6 @@ choice
prompt "OMAP4 board select"
optional
-config TARGET_DUOVERO
- bool "OMAP4430 Gumstix Duovero"
-
config TARGET_OMAP4_PANDA
bool "TI OMAP4 PandaBoard"
@@ -21,7 +18,6 @@ endchoice
config SYS_SOC
default "omap4"
-source "board/gumstix/duovero/Kconfig"
source "board/ti/panda/Kconfig"
source "board/ti/sdp4430/Kconfig"
source "board/amazon/kc1/Kconfig"
diff --git a/board/gumstix/duovero/Kconfig b/board/gumstix/duovero/Kconfig
deleted file mode 100644
index 2f8558aaf3..0000000000
--- a/board/gumstix/duovero/Kconfig
+++ /dev/null
@@ -1,12 +0,0 @@
-if TARGET_DUOVERO
-
-config SYS_BOARD
- default "duovero"
-
-config SYS_VENDOR
- default "gumstix"
-
-config SYS_CONFIG_NAME
- default "duovero"
-
-endif
diff --git a/board/gumstix/duovero/MAINTAINERS b/board/gumstix/duovero/MAINTAINERS
deleted file mode 100644
index 87cd4e670c..0000000000
--- a/board/gumstix/duovero/MAINTAINERS
+++ /dev/null
@@ -1,6 +0,0 @@
-DUOVERO BOARD
-M: Ash Charles <ash at gumstix.com>
-S: Maintained
-F: board/gumstix/duovero/
-F: include/configs/duovero.h
-F: configs/duovero_defconfig
diff --git a/board/gumstix/duovero/Makefile b/board/gumstix/duovero/Makefile
deleted file mode 100644
index d6eff473f8..0000000000
--- a/board/gumstix/duovero/Makefile
+++ /dev/null
@@ -1,6 +0,0 @@
-# SPDX-License-Identifier: GPL-2.0+
-#
-# (C) Copyright 2000, 2001, 2002
-# Wolfgang Denk, DENX Software Engineering, wd at denx.de.
-
-obj-y := duovero.o
diff --git a/board/gumstix/duovero/duovero.c b/board/gumstix/duovero/duovero.c
deleted file mode 100644
index 0df03a5a61..0000000000
--- a/board/gumstix/duovero/duovero.c
+++ /dev/null
@@ -1,273 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0+
-/*
- * (C) Copyright 2013
- * Gumstix Inc. <www.gumstix.com>
- * Maintainer: Ash Charles <ash at gumstix.com>
- */
-#include <common.h>
-#include <init.h>
-#include <net.h>
-#include <netdev.h>
-#include <asm/arch/sys_proto.h>
-#include <asm/arch/mmc_host_def.h>
-#include <twl6030.h>
-#include <asm/emif.h>
-#include <asm/arch/clock.h>
-#include <asm/arch/gpio.h>
-#include <asm/gpio.h>
-#include <asm/mach-types.h>
-#include <linux/delay.h>
-
-#include "duovero_mux_data.h"
-
-#define WIFI_EN 43
-
-#if defined(CONFIG_CMD_NET)
-#define SMSC_NRESET 45
-static void setup_net_chip(void);
-#endif
-
-#ifdef CONFIG_USB_EHCI_HCD
-#include <usb.h>
-#include <asm/arch/ehci.h>
-#include <asm/ehci-omap.h>
-#endif
-
-DECLARE_GLOBAL_DATA_PTR;
-
-const struct omap_sysinfo sysinfo = {
- "Board: duovero\n"
-};
-
-struct omap4_scrm_regs *const scrm = (struct omap4_scrm_regs *)0x4a30a000;
-
-/**
- * @brief board_init
- *
- * @return 0
- */
-int board_init(void)
-{
- gpmc_init();
-
- gd->bd->bi_arch_number = MACH_TYPE_DUOVERO;
- gd->bd->bi_boot_params = CONFIG_SYS_SDRAM_BASE + 0x100;
-
- return 0;
-}
-
-/**
- * @brief misc_init_r - Configure board specific configurations
- * such as power configurations, ethernet initialization as phase2 of
- * boot sequence
- *
- * @return 0
- */
-int misc_init_r(void)
-{
- int ret = 0;
- u8 val;
-
- /* wifi setup: first enable 32Khz clock from 6030 pmic */
- val = 0xe1;
- ret = i2c_write(TWL6030_CHIP_PM, 0xbe, 1, &val, 1);
- if (ret)
- printf("Failed to enable 32Khz clock to wifi module\n");
-
- /* then setup WIFI_EN as an output pin and send reset pulse */
- if (!gpio_request(WIFI_EN, "")) {
- gpio_direction_output(WIFI_EN, 0);
- gpio_set_value(WIFI_EN, 1);
- udelay(1);
- gpio_set_value(WIFI_EN, 0);
- udelay(1);
- gpio_set_value(WIFI_EN, 1);
- }
-
-#if defined(CONFIG_CMD_NET)
- setup_net_chip();
-#endif
- return 0;
-}
-
-void set_muxconf_regs(void)
-{
- do_set_mux((*ctrl)->control_padconf_core_base,
- core_padconf_array_essential,
- sizeof(core_padconf_array_essential) /
- sizeof(struct pad_conf_entry));
-
- do_set_mux((*ctrl)->control_padconf_wkup_base,
- wkup_padconf_array_essential,
- sizeof(wkup_padconf_array_essential) /
- sizeof(struct pad_conf_entry));
-
- do_set_mux((*ctrl)->control_padconf_core_base,
- core_padconf_array_non_essential,
- sizeof(core_padconf_array_non_essential) /
- sizeof(struct pad_conf_entry));
-
- do_set_mux((*ctrl)->control_padconf_wkup_base,
- wkup_padconf_array_non_essential,
- sizeof(wkup_padconf_array_non_essential) /
- sizeof(struct pad_conf_entry));
-}
-
-#if defined(CONFIG_MMC)
-int board_mmc_init(bd_t *bis)
-{
- return omap_mmc_init(0, 0, 0, -1, -1);
-}
-
-#if !defined(CONFIG_SPL_BUILD)
-void board_mmc_power_init(void)
-{
- twl6030_power_mmc_init(0);
-}
-#endif
-#endif
-
-#if defined(CONFIG_CMD_NET)
-
-#define GPMC_SIZE_16M 0xF
-#define GPMC_BASEADDR_MASK 0x3F
-#define GPMC_CS_ENABLE 0x1
-
-static void enable_gpmc_net_config(const u32 *gpmc_config, const struct gpmc_cs *cs,
- u32 base, u32 size)
-{
- writel(0, &cs->config7);
- sdelay(1000);
- /* Delay for settling */
- writel(gpmc_config[0], &cs->config1);
- writel(gpmc_config[1], &cs->config2);
- writel(gpmc_config[2], &cs->config3);
- writel(gpmc_config[3], &cs->config4);
- writel(gpmc_config[4], &cs->config5);
- writel(gpmc_config[5], &cs->config6);
-
- /*
- * Enable the config. size is the CS size and goes in
- * bits 11:8. We set bit 6 to enable this CS and the base
- * address goes into bits 5:0.
- */
- writel((size << 8) | (GPMC_CS_ENABLE << 6) |
- ((base >> 24) & GPMC_BASEADDR_MASK),
- &cs->config7);
-
- sdelay(2000);
-}
-
-/* GPMC CS configuration for an SMSC LAN9221 ethernet controller */
-#define NET_LAN9221_GPMC_CONFIG1 0x2a001203
-#define NET_LAN9221_GPMC_CONFIG2 0x000a0a02
-#define NET_LAN9221_GPMC_CONFIG3 0x00020200
-#define NET_LAN9221_GPMC_CONFIG4 0x0a030a03
-#define NET_LAN9221_GPMC_CONFIG5 0x000a0a0a
-#define NET_LAN9221_GPMC_CONFIG6 0x8a070707
-#define NET_LAN9221_GPMC_CONFIG7 0x00000f6c
-
-/* GPMC definitions for LAN9221 chips on expansion boards */
-static const u32 gpmc_lan_config[] = {
- NET_LAN9221_GPMC_CONFIG1,
- NET_LAN9221_GPMC_CONFIG2,
- NET_LAN9221_GPMC_CONFIG3,
- NET_LAN9221_GPMC_CONFIG4,
- NET_LAN9221_GPMC_CONFIG5,
- NET_LAN9221_GPMC_CONFIG6,
- /*CONFIG7- computed as params */
-};
-
-/*
- * Routine: setup_net_chip
- * Description: Setting up the configuration GPMC registers specific to the
- * Ethernet hardware.
- */
-static void setup_net_chip(void)
-{
- enable_gpmc_net_config(gpmc_lan_config, &gpmc_cfg->cs[5], 0x2C000000,
- GPMC_SIZE_16M);
-
- /* Make GPIO SMSC_NRESET as output pin and send reset pulse */
- if (!gpio_request(SMSC_NRESET, "")) {
- gpio_direction_output(SMSC_NRESET, 0);
- gpio_set_value(SMSC_NRESET, 1);
- udelay(1);
- gpio_set_value(SMSC_NRESET, 0);
- udelay(1);
- gpio_set_value(SMSC_NRESET, 1);
- }
-}
-#endif
-
-int board_eth_init(bd_t *bis)
-{
- int rc = 0;
-#ifdef CONFIG_SMC911X
- rc = smc911x_initialize(0, CONFIG_SMC911X_BASE);
-#endif
- return rc;
-}
-
-#ifdef CONFIG_USB_EHCI_HCD
-
-static struct omap_usbhs_board_data usbhs_bdata = {
- .port_mode[0] = OMAP_EHCI_PORT_MODE_PHY,
- .port_mode[1] = OMAP_USBHS_PORT_MODE_UNUSED,
- .port_mode[2] = OMAP_USBHS_PORT_MODE_UNUSED,
-};
-
-int ehci_hcd_init(int index, enum usb_init_type init,
- struct ehci_hccr **hccr, struct ehci_hcor **hcor)
-{
- int ret;
- unsigned int utmi_clk;
- u32 auxclk, altclksrc;
-
- /* Now we can enable our port clocks */
- utmi_clk = readl((void *)CM_L3INIT_HSUSBHOST_CLKCTRL);
- utmi_clk |= HSUSBHOST_CLKCTRL_CLKSEL_UTMI_P1_MASK;
- setbits_le32((void *)CM_L3INIT_HSUSBHOST_CLKCTRL, utmi_clk);
-
- auxclk = readl(&scrm->auxclk3);
- /* Select sys_clk */
- auxclk &= ~AUXCLK_SRCSELECT_MASK;
- auxclk |= AUXCLK_SRCSELECT_SYS_CLK << AUXCLK_SRCSELECT_SHIFT;
- /* Set the divisor to 2 */
- auxclk &= ~AUXCLK_CLKDIV_MASK;
- auxclk |= AUXCLK_CLKDIV_2 << AUXCLK_CLKDIV_SHIFT;
- /* Request auxilary clock #3 */
- auxclk |= AUXCLK_ENABLE_MASK;
- writel(auxclk, &scrm->auxclk3);
-
- altclksrc = readl(&scrm->altclksrc);
-
- /* Activate alternate system clock supplier */
- altclksrc &= ~ALTCLKSRC_MODE_MASK;
- altclksrc |= ALTCLKSRC_MODE_ACTIVE;
-
- /* enable clocks */
- altclksrc |= ALTCLKSRC_ENABLE_INT_MASK | ALTCLKSRC_ENABLE_EXT_MASK;
-
- writel(altclksrc, &scrm->altclksrc);
-
- ret = omap_ehci_hcd_init(index, &usbhs_bdata, hccr, hcor);
- if (ret < 0)
- return ret;
-
- return 0;
-}
-
-int ehci_hcd_stop(int index)
-{
- return omap_ehci_hcd_stop();
-}
-#endif
-
-/*
- * get_board_rev() - get board revision
- */
-u32 get_board_rev(void)
-{
- return 0x20;
-}
diff --git a/board/gumstix/duovero/duovero_mux_data.h b/board/gumstix/duovero/duovero_mux_data.h
deleted file mode 100644
index b56bffe165..0000000000
--- a/board/gumstix/duovero/duovero_mux_data.h
+++ /dev/null
@@ -1,198 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0+ */
-/*
- * (C) Copyright 2012
- * Gumstix Incorporated, <www.gumstix.com>
- * Maintainer: Ash Charles <ash at gumstix.com>
- */
-#ifndef _DUOVERO_MUX_DATA_H_
-#define _DUOVERO_MUX_DATA_H_
-
-#include <asm/arch/mux_omap4.h>
-
-const struct pad_conf_entry core_padconf_array_essential[] = {
- {SDMMC1_CLK, (PTU | OFF_EN | OFF_OUT_PTD | M0)}, /* sdmmc1_clk */
- {SDMMC1_CMD, (PTU | IEN | OFF_EN | OFF_PD | OFF_IN | M0)}, /* sdmmc1_cmd */
- {SDMMC1_DAT0, (PTU | IEN | OFF_EN | OFF_PD | OFF_IN | M0)}, /* sdmmc1_dat0 */
- {SDMMC1_DAT1, (PTU | IEN | OFF_EN | OFF_PD | OFF_IN | M0)}, /* sdmmc1_dat1 */
- {SDMMC1_DAT2, (PTU | IEN | OFF_EN | OFF_PD | OFF_IN | M0)}, /* sdmmc1_dat2 */
- {SDMMC1_DAT3, (PTU | IEN | OFF_EN | OFF_PD | OFF_IN | M0)}, /* sdmmc1_dat3 */
- {I2C1_SCL, (PTU | IEN | M0)}, /* i2c1_scl */
- {I2C1_SDA, (PTU | IEN | M0)}, /* i2c1_sda */
- {I2C2_SCL, (PTU | IEN | M0)}, /* i2c2_scl */
- {I2C2_SDA, (PTU | IEN | M0)}, /* i2c2_sda */
- {I2C3_SCL, (PTU | IEN | M0)}, /* i2c3_scl */
- {I2C3_SDA, (PTU | IEN | M0)}, /* i2c3_sda */
- {I2C4_SCL, (PTU | IEN | M0)}, /* i2c4_scl */
- {I2C4_SDA, (PTU | IEN | M0)}, /* i2c4_sda */
- {UART3_CTS_RCTX, (PTU | IEN | M0)}, /* uart3_tx */
- {UART3_RTS_SD, (M0)}, /* uart3_rts_sd */
- {UART3_RX_IRRX, (PTU | IEN | M0)}, /* uart3_rx */
- {UART3_TX_IRTX, (M0)} /* uart3_tx */
-};
-
-const struct pad_conf_entry wkup_padconf_array_essential[] = {
- {PAD1_SR_SCL, (PTU | IEN | M0)}, /* sr_scl */
- {PAD0_SR_SDA, (PTU | IEN | M0)}, /* sr_sda */
- {PAD1_SYS_32K, (IEN | M0)} /* sys_32k */
-};
-
-const struct pad_conf_entry core_padconf_array_non_essential[] = {
- {GPMC_AD0, (PTU | IEN | M0)}, /* gpmc_ad0 */
- {GPMC_AD1, (PTU | IEN | M0)}, /* gpmc_ad1 */
- {GPMC_AD2, (PTU | IEN | M0)}, /* gpmc_ad2 */
- {GPMC_AD3, (PTU | IEN | M0)}, /* gpmc_ad3 */
- {GPMC_AD4, (PTU | IEN | M0)}, /* gpmc_ad4 */
- {GPMC_AD5, (PTU | IEN | M0)}, /* gpmc_ad5 */
- {GPMC_AD6, (PTU | IEN | M0)}, /* gpmc_ad6 */
- {GPMC_AD7, (PTU | IEN | M0)}, /* gpmc_ad7 */
- {GPMC_AD8, (PTU | IEN | M0)}, /* gpmc_ad8 */
- {GPMC_AD9, (PTU | IEN | M0)}, /* gpmc_ad9 */
- {GPMC_AD10, (PTU | IEN | M0)}, /* gpmc_ad10 */
- {GPMC_AD11, (PTU | IEN | M0)}, /* gpmc_ad11 */
- {GPMC_AD12, (PTU | IEN | M0)}, /* gpmc_ad12 */
- {GPMC_AD13, (PTU | IEN | M0)}, /* gpmc_ad13 */
- {GPMC_AD14, (PTU | IEN | M0)}, /* gpmc_ad14 */
- {GPMC_AD15, (PTU | IEN | M0)}, /* gpmc_ad15 */
- {GPMC_A16, (PTU | IEN | M3)}, /* gpio_40 */
- {GPMC_A17, (PTU | IEN | M3)}, /* gpio_41 - hdmi_ls_oe */
- {GPMC_A18, (PTU | IEN | M3)}, /* gpio_42 */
- {GPMC_A19, (PTU | IEN | M3)}, /* gpio_43 - wifi_en */
- {GPMC_A20, (PTU | IEN | M3)}, /* gpio_44 - eth_irq */
- {GPMC_A21, (PTU | IEN | M3)}, /* gpio_45 - eth_nreset */
- {GPMC_A22, (PTU | IEN | M3)}, /* gpio_46 - eth_pme */
- {GPMC_A23, (PTU | IEN | M3)}, /* gpio_47 */
- {GPMC_A24, (PTU | IEN | M3)}, /* gpio_48 - eth_mdix */
- {GPMC_A25, (PTU | IEN | M3)}, /* gpio_49 - bt_wakeup */
- {GPMC_NCS0, (PTU | M0)}, /* gpmc_ncs0 */
- {GPMC_NCS1, (PTU | M0)}, /* gpmc_ncs1 */
- {GPMC_NCS2, (PTU | M0)}, /* gpmc_ncs2 */
- {GPMC_NCS3, (PTU | IEN | M3)}, /* gpio_53 */
- {C2C_DATA12, (PTU | M0)}, /* gpmc_ncs4 */
- {C2C_DATA13, (PTU | M0)}, /* gpmc_ncs5 - eth_cs */
- {GPMC_NWP, (PTU | IEN | M0)}, /* gpmc_nwp */
- {GPMC_CLK, (PTU | IEN | M0)}, /* gpmc_clk */
- {GPMC_NADV_ALE, (PTU | M0)}, /* gpmc_nadv_ale */
- {GPMC_NBE0_CLE, (PTU | M0)}, /* gpmc_nbe0_cle */
- {GPMC_NBE1, (PTU | M0)}, /* gpmc_nbe1 */
- {GPMC_WAIT0, (PTU | IEN | M0)}, /* gpmc_wait0 */
- {GPMC_WAIT1, (PTU | IEN | M0)}, /* gpio_62 - usbh_nreset */
- {GPMC_NOE, (PTU | M0)}, /* gpmc_noe */
- {GPMC_NWE, (PTU | M0)}, /* gpmc_nwe */
- {HDMI_HPD, (PTD | IEN | M3)}, /* gpio_63 - hdmi_hpd */
- {HDMI_CEC, (PTU | IEN | M0)}, /* hdmi_cec */
- {HDMI_DDC_SCL, (M0)}, /* hdmi_ddc_scl */
- {HDMI_DDC_SDA, (IEN | M0)}, /* hdmi_ddc_sda */
- {CSI21_DX0, (IEN | M0)}, /* csi21_dx0 */
- {CSI21_DY0, (IEN | M0)}, /* csi21_dy0 */
- {CSI21_DX1, (IEN | M0)}, /* csi21_dx1 */
- {CSI21_DY1, (IEN | M0)}, /* csi21_dy1 */
- {CSI21_DX2, (IEN | M0)}, /* csi21_dx2 */
- {CSI21_DY2, (IEN | M0)}, /* csi21_dy2 */
- {CSI21_DX3, (IEN | M0)}, /* csi21_dx3 */
- {CSI21_DY3, (IEN | M0)}, /* csi21_dy3 */
- {CSI21_DX4, (IEN | M0)}, /* csi21_dx4 */
- {CSI21_DY4, (IEN | M0)}, /* csi21_dy4 */
- {CSI22_DX0, (IEN | M0)}, /* csi22_dx0 */
- {CSI22_DY0, (IEN | M0)}, /* csi22_dy0 */
- {CSI22_DX1, (IEN | M0)}, /* csi22_dx1 */
- {CSI22_DY1, (IEN | M0)}, /* csi22_dy1 */
- {USBB1_ULPITLL_CLK, (PTD | IEN | OFF_EN | OFF_PD | OFF_IN | M4)},/* usbb1_ulpiphy_clk */
- {USBB1_ULPITLL_STP, (OFF_EN | OFF_OUT_PTD | M4)}, /* usbb1_ulpiphy_stp */
- {USBB1_ULPITLL_DIR, (IEN | OFF_EN | OFF_PD | OFF_IN | M4)}, /* usbb1_ulpiphy_dir */
- {USBB1_ULPITLL_NXT, (IEN | OFF_EN | OFF_PD | OFF_IN | M4)}, /* usbb1_ulpiphy_nxt */
- {USBB1_ULPITLL_DAT0, (IEN | OFF_EN | OFF_PD | OFF_IN | M4)}, /* usbb1_ulpiphy_dat0 */
- {USBB1_ULPITLL_DAT1, (IEN | OFF_EN | OFF_PD | OFF_IN | M4)}, /* usbb1_ulpiphy_dat1 */
- {USBB1_ULPITLL_DAT2, (IEN | OFF_EN | OFF_PD | OFF_IN | M4)}, /* usbb1_ulpiphy_dat2 */
- {USBB1_ULPITLL_DAT3, (IEN | OFF_EN | OFF_PD | OFF_IN | M4)}, /* usbb1_ulpiphy_dat3 */
- {USBB1_ULPITLL_DAT4, (IEN | OFF_EN | OFF_PD | OFF_IN | M4)}, /* usbb1_ulpiphy_dat4 */
- {USBB1_ULPITLL_DAT5, (IEN | OFF_EN | OFF_PD | OFF_IN | M4)}, /* usbb1_ulpiphy_dat5 */
- {USBB1_ULPITLL_DAT6, (IEN | OFF_EN | OFF_PD | OFF_IN | M4)}, /* usbb1_ulpiphy_dat6 */
- {USBB1_ULPITLL_DAT7, (IEN | OFF_EN | OFF_PD | OFF_IN | M4)}, /* usbb1_ulpiphy_dat7 */
- {USBB1_HSIC_DATA, (PTU | IEN | M3)}, /* gpio_96 - usbh_cpen */
- {USBB1_HSIC_STROBE, (PTU | IEN | M3)}, /* gpio_97 - usbh_reset */
- {ABE_MCBSP2_CLKX, (IEN | OFF_EN | OFF_PD | OFF_IN | M0)}, /* abe_mcbsp2_clkx */
- {ABE_MCBSP2_DR, (IEN | OFF_EN | OFF_OUT_PTD | M0)}, /* abe_mcbsp2_dr */
- {ABE_MCBSP2_DX, (OFF_EN | OFF_OUT_PTD | M0)}, /* abe_mcbsp2_dx */
- {ABE_MCBSP2_FSX, (IEN | OFF_EN | OFF_PD | OFF_IN | M0)}, /* abe_mcbsp2_fsx */
- {ABE_PDM_UL_DATA, (PTD | IEN | OFF_EN | OFF_PD | OFF_IN | M0)}, /* abe_pdm_ul_data */
- {ABE_PDM_DL_DATA, (PTD | IEN | OFF_EN | OFF_PD | OFF_IN | M0)}, /* abe_pdm_dl_data */
- {ABE_PDM_FRAME, (PTU | IEN | OFF_EN | OFF_PD | OFF_IN | M0)}, /* abe_pdm_frame */
- {ABE_PDM_LB_CLK, (PTD | IEN | OFF_EN | OFF_PD | OFF_IN | M0)}, /* abe_pdm_lb_clk */
- {ABE_CLKS, (PTD | IEN | OFF_EN | OFF_PD | OFF_IN | M0)}, /* abe_clks */
- {ABE_DMIC_CLK1, (M0)}, /* abe_dmic_clk1 */
- {ABE_DMIC_DIN1, (IEN | M0)}, /* abe_dmic_din1 */
- {ABE_DMIC_DIN2, (IEN | M0)}, /* abe_dmic_din2 */
- {ABE_DMIC_DIN3, (IEN | M0)}, /* abe_dmic_din3 */
- {UART2_CTS, (PTU | IEN | M0)}, /* uart2_cts */
- {UART2_RTS, (M0)}, /* uart2_rts */
- {UART2_RX, (PTU | IEN | M0)}, /* uart2_rx */
- {UART2_TX, (M0)}, /* uart2_tx */
- {HDQ_SIO, (M0)}, /* hdq-sio */
- {MCSPI1_CLK, (IEN | OFF_EN | OFF_PD | OFF_IN | M0)}, /* mcspi1_clk */
- {MCSPI1_SOMI, (IEN | OFF_EN | OFF_PD | OFF_IN | M0)}, /* mcspi1_somi */
- {MCSPI1_SIMO, (IEN | OFF_EN | OFF_PD | OFF_IN | M0)}, /* mcspi1_simo */
- {MCSPI1_CS0, (PTD | IEN | OFF_EN | OFF_PD | OFF_IN | M0)}, /* mcspi1_cs0 */
- {MCSPI1_CS1, (PTD | IEN | OFF_EN | OFF_PD | OFF_IN | M0)}, /* mcspi1_cs1 */
- {SDMMC5_CLK, (PTU | IEN | OFF_EN | OFF_PD | OFF_IN | M0)}, /* sdmmc5_clk */
- {SDMMC5_CMD, (PTU | IEN | OFF_EN | OFF_PD | OFF_IN | M0)}, /* sdmmc5_cmd */
- {SDMMC5_DAT0, (PTU | IEN | OFF_EN | OFF_PD | OFF_IN | M0)}, /* sdmmc5_dat0 */
- {SDMMC5_DAT1, (PTU | IEN | OFF_EN | OFF_PD | OFF_IN | M0)}, /* sdmmc5_dat1 */
- {SDMMC5_DAT2, (PTU | IEN | OFF_EN | OFF_PD | OFF_IN | M0)}, /* sdmmc5_dat2 */
- {SDMMC5_DAT3, (PTU | IEN | OFF_EN | OFF_PD | OFF_IN | M0)}, /* sdmmc5_dat3 */
- {MCSPI4_CLK, (IEN | OFF_EN | OFF_PD | OFF_IN | M0)}, /* mcspi4_clk */
- {MCSPI4_SIMO, (IEN | OFF_EN | OFF_PD | OFF_IN | M0)}, /* mcspi4_simo */
- {MCSPI4_SOMI, (IEN | OFF_EN | OFF_PD | OFF_IN | M0)}, /* mcspi4_somi */
- {MCSPI4_CS0, (PTD | IEN | OFF_EN | OFF_PD | OFF_IN | M0)}, /* mcspi4_cs0 */
- {UART4_RX, (IEN | PTU | M0)}, /* uart4_rx */
- {UART4_TX, (M0)}, /* uart4_tx */
- {USBB2_ULPITLL_CLK, (PTU | IEN | M3)}, /* gpio_157 - start_adc */
- {USBB2_ULPITLL_STP, (PTU | IEN | M3)}, /* gpio_158 - spi_nirq */
- {USBB2_ULPITLL_DIR, (PTU | IEN | M3)}, /* gpio_159 - bt_nreset */
- {USBB2_ULPITLL_NXT, (PTU | IEN | M3)}, /* gpio_160 - audio_pwron*/
- {USBB2_ULPITLL_DAT0, (PTU | IEN | M3)}, /* gpio_161 - bid_0 */
- {USBB2_ULPITLL_DAT1, (PTU | IEN | M3)}, /* gpio_162 - bid_1 */
- {USBB2_ULPITLL_DAT2, (PTU | IEN | M3)}, /* gpio_163 - bid_2 */
- {USBB2_ULPITLL_DAT3, (PTU | IEN | M3)}, /* gpio_164 - bid_3 */
- {USBB2_ULPITLL_DAT4, (PTU | IEN | M3)}, /* gpio_165 - bid_4 */
- {USBB2_ULPITLL_DAT5, (PTU | IEN | M3)}, /* gpio_166 - ts_irq*/
- {USBB2_ULPITLL_DAT6, (PTU | IEN | M3)}, /* gpio_167 - gps_pps */
- {USBB2_ULPITLL_DAT7, (PTU | IEN | M3)}, /* gpio_168 */
- {USBB2_HSIC_DATA, (PTU | IEN | M3)}, /* gpio_169 */
- {USBB2_HSIC_STROBE, (PTU | IEN | M3)}, /* gpio_170 */
- {UNIPRO_TX1, (PTU | IEN | M3)}, /* gpio_173 */
- {USBA0_OTG_CE, (PTD | OFF_EN | OFF_PD | OFF_OUT_PTD | M0)}, /* usba0_otg_ce */
- {USBA0_OTG_DP, (IEN | OFF_EN | OFF_PD | OFF_IN | M0)}, /* usba0_otg_dp */
- {USBA0_OTG_DM, (IEN | OFF_EN | OFF_PD | OFF_IN | M0)}, /* usba0_otg_dm */
- {SYS_NIRQ1, (PTU | IEN | M0)}, /* sys_nirq1 */
- {SYS_NIRQ2, (PTU | IEN | M0)}, /* sys_nirq2 */
- {SYS_BOOT0, (M0)}, /* sys_boot0 */
- {SYS_BOOT1, (M0)}, /* sys_boot1 */
- {SYS_BOOT2, (M0)}, /* sys_boot2 */
- {SYS_BOOT3, (M0)}, /* sys_boot3 */
- {SYS_BOOT4, (M0)}, /* sys_boot4 */
- {SYS_BOOT5, (M0)}, /* sys_boot5 */
- {DPM_EMU0, (IEN | M0)}, /* dpm_emu0 */
- {DPM_EMU1, (IEN | M0)}, /* dpm_emu1 */
- {DPM_EMU16, (PTU | IEN | M3)}, /* gpio_27 */
- {DPM_EMU17, (PTU | IEN | M3)}, /* gpio_28 */
- {DPM_EMU18, (PTU | IEN | M3)}, /* gpio_29 */
- {DPM_EMU19, (PTU | IEN | M3)}, /* gpio_30 */
-};
-
-const struct pad_conf_entry wkup_padconf_array_non_essential[] = {
- {PAD1_FREF_XTAL_IN, (M0)}, /* fref_xtal_in */
- {PAD0_FREF_SLICER_IN, (M0)}, /* fref_slicer_in */
- {PAD1_FREF_CLK_IOREQ, (M0)}, /* fref_clk_ioreq */
- {PAD0_FREF_CLK0_OUT, (M7)}, /* safe mode */
- {PAD1_FREF_CLK3_REQ, M7}, /* safe mode */
- {PAD0_FREF_CLK3_OUT, (M0)}, /* fref_clk3_out */
- {PAD0_SYS_NRESPWRON, (M0)}, /* sys_nrespwron */
- {PAD1_SYS_NRESWARM, (M0)}, /* sys_nreswarm */
- {PAD0_SYS_PWR_REQ, (PTU | M0)}, /* sys_pwr_req */
- {PAD1_SYS_PWRON_RESET, (M3)}, /* gpio_wk29 */
- {PAD0_SYS_BOOT6, (M0)}, /* sys_boot6 */
- {PAD1_SYS_BOOT7, (M0)}, /* sys_boot7 */
-};
-
-
-#endif /* _DUOVERO_MUX_DATA_H_ */
diff --git a/configs/duovero_defconfig b/configs/duovero_defconfig
deleted file mode 100644
index ab06ada613..0000000000
--- a/configs/duovero_defconfig
+++ /dev/null
@@ -1,42 +0,0 @@
-CONFIG_ARM=y
-CONFIG_ARCH_OMAP2PLUS=y
-CONFIG_OMAP44XX=y
-CONFIG_TARGET_DUOVERO=y
-CONFIG_SPL=y
-CONFIG_SPL_TEXT_BASE=0x40300000
-CONFIG_DISTRO_DEFAULTS=y
-CONFIG_BOOTCOMMAND="if test ${boot_fit} -eq 1; then run update_to_fit; fi; run findfdt; run init_console; run envboot; run distro_bootcmd"
-CONFIG_SYS_CONSOLE_IS_IN_ENV=y
-CONFIG_SYS_CONSOLE_INFO_QUIET=y
-CONFIG_VERSION_VARIABLE=y
-# CONFIG_SPL_I2C_SUPPORT is not set
-# CONFIG_SPL_NAND_SUPPORT is not set
-CONFIG_SYS_PROMPT="duovero # "
-CONFIG_CMD_ASKENV=y
-CONFIG_CMD_GPIO=y
-CONFIG_CMD_I2C=y
-CONFIG_CMD_MMC=y
-CONFIG_CMD_SPI=y
-CONFIG_CMD_USB=y
-# CONFIG_CMD_SETEXPR is not set
-# CONFIG_CMD_NFS is not set
-CONFIG_CMD_EXT4_WRITE=y
-# CONFIG_SPL_EFI_PARTITION is not set
-CONFIG_SPL_PARTITION_UUIDS=y
-CONFIG_SYS_RELOC_GD_ENV_ADDR=y
-CONFIG_ENV_VARS_UBOOT_RUNTIME_CONFIG=y
-CONFIG_MMC_OMAP_HS=y
-CONFIG_SMC911X=y
-CONFIG_SMC911X_BASE=0x2C000000
-CONFIG_SMC911X_32_BIT=y
-CONFIG_CONS_INDEX=3
-CONFIG_SYS_NS16550=y
-CONFIG_SPI=y
-CONFIG_OMAP3_SPI=y
-CONFIG_USB=y
-CONFIG_USB_EHCI_HCD=y
-CONFIG_USB_MUSB_UDC=y
-CONFIG_USB_OMAP3=y
-CONFIG_USB_GADGET=y
-CONFIG_FAT_WRITE=y
-CONFIG_OF_LIBFDT=y
diff --git a/include/configs/duovero.h b/include/configs/duovero.h
deleted file mode 100644
index dccb369991..0000000000
--- a/include/configs/duovero.h
+++ /dev/null
@@ -1,36 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0+ */
-/*
- * (C) Copyright: 2013
- * Gumstix, Inc - http://www.gumstix.com
- * Maintainer: Ash Charles <ash at gumstix.com>
- *
- * Configuration settings for the Gumstix DuoVero board.
- * See omap4_common.h for OMAP4 common part
- */
-
-#ifndef __CONFIG_DUOVERO_H
-#define __CONFIG_DUOVERO_H
-
-/*
- * High Level Configuration Options
- */
-#define CONFIG_DUOVERO
-#define CONFIG_MACH_TYPE MACH_TYPE_DUOVERO
-
-#include <configs/ti_omap4_common.h>
-
-#undef CONFIG_SYS_EMIF_PRECALCULATED_TIMING_REGS
-#define CONFIG_SYS_AUTOMATIC_SDRAM_DETECTION
-#define CONFIG_SYS_DEFAULT_LPDDR2_TIMINGS
-
-/* USB UHH support options */
-#define CONFIG_OMAP_EHCI_PHY1_RESET_GPIO 1
-#define CONFIG_OMAP_EHCI_PHY2_RESET_GPIO 62
-
-#define CONFIG_SYS_ENABLE_PADS_ALL
-
-/* GPIO */
-
-/* ENV related config options */
-
-#endif /* __CONFIG_DUOVERO_H */
diff --git a/include/configs/ti_omap4_common.h b/include/configs/ti_omap4_common.h
index 1e316227aa..5e5490fede 100644
--- a/include/configs/ti_omap4_common.h
+++ b/include/configs/ti_omap4_common.h
@@ -107,8 +107,6 @@
"setenv fdtfile omap4-panda-a4.dtb; fi;" \
"if test $board_name = panda-es; then " \
"setenv fdtfile omap4-panda-es.dtb; fi;" \
- "if test $board_name = duovero; then " \
- "setenv fdtfile omap4-duovero-parlor.dtb; fi;" \
"if test $fdtfile = undefined; then " \
"echo WARNING: Could not determine device tree to use; fi; \0" \
BOOTENV
--
2.25.1
More information about the U-Boot
mailing list