[PATCH 14/14] nand: enable the Randomizer module for i.mx7 and i.mx8
Peng Fan
peng.fan at nxp.com
Mon May 4 16:09:03 CEST 2020
From: Alice Guo <alice.guo at nxp.com>
To enable the Randomizer module, set GPMI_ECCCTRL[RANDOMIZER_ENABLE] to
1, then set GPMI_ECCCOUNT[RANDOMIZER_PAGE] to select randomizer page
number needed to be randomized.
Signed-off-by: Alice Guo <alice.guo at nxp.com>
Signed-off-by: Peng Fan <peng.fan at nxp.com>
---
drivers/mtd/nand/raw/mxs_nand.c | 8 +++++++-
1 file changed, 7 insertions(+), 1 deletion(-)
diff --git a/drivers/mtd/nand/raw/mxs_nand.c b/drivers/mtd/nand/raw/mxs_nand.c
index 3fd21e51f2..c3191feca8 100644
--- a/drivers/mtd/nand/raw/mxs_nand.c
+++ b/drivers/mtd/nand/raw/mxs_nand.c
@@ -710,6 +710,12 @@ static int mxs_nand_ecc_read_page(struct mtd_info *mtd, struct nand_chip *nand,
d->cmd.pio_words[4] = (dma_addr_t)nand_info->data_buf;
d->cmd.pio_words[5] = (dma_addr_t)nand_info->oob_buf;
+ if ((is_mx7() || is_imx8m()) && nand_info->en_randomizer) {
+ d->cmd.pio_words[2] |= GPMI_ECCCTRL_RANDOMIZER_ENABLE |
+ GPMI_ECCCTRL_RANDOMIZER_TYPE2;
+ d->cmd.pio_words[3] |= (page % 256) << 16;
+ }
+
mxs_dma_desc_append(channel, d);
/* Compile the DMA descriptor - disable the BCH block. */
@@ -871,7 +877,7 @@ static int mxs_nand_ecc_write_page(struct mtd_info *mtd,
* The value is between 0-255. For additional details
* check 9.6.6.4 of i.MX7D Applications Processor reference
*/
- d->cmd.pio_words[3] |= (page % 255) << 16;
+ d->cmd.pio_words[3] |= (page % 256) << 16;
}
mxs_dma_desc_append(channel, d);
--
2.16.4
More information about the U-Boot
mailing list