[PATCH v7 13/22] riscv: cpu: fu540: Add support for cpu fu540

[Jagan Teki]

On Sat, May 2, 2020 at 3:38 PM Pragnesh Patel <pragnesh.patel at sifive.com> wrote:
>
> Add SiFive fu540 cpu to support RISC-V arch

This looks like a new patch in this series, isn't it?

>
> Signed-off-by: Pragnesh Patel <pragnesh.patel at sifive.com>
> ---

Good practice is to add "changes for 7" so-that it is easy for reviews
to find what is new in this series.

>  arch/riscv/Kconfig            |  1 +
>  arch/riscv/cpu/fu540/Kconfig  | 15 ++++++++++++++
>  arch/riscv/cpu/fu540/Makefile |  7 +++++++
>  arch/riscv/cpu/fu540/cpu.c    | 22 ++++++++++++++++++++
>  arch/riscv/cpu/fu540/dram.c   | 38 +++++++++++++++++++++++++++++++++++
>  5 files changed, 83 insertions(+)
>  create mode 100644 arch/riscv/cpu/fu540/Kconfig
>  create mode 100644 arch/riscv/cpu/fu540/Makefile
>  create mode 100644 arch/riscv/cpu/fu540/cpu.c
>  create mode 100644 arch/riscv/cpu/fu540/dram.c
>
> diff --git a/arch/riscv/Kconfig b/arch/riscv/Kconfig
> index fb5fe5afff..3044609971 100644
> --- a/arch/riscv/Kconfig
> +++ b/arch/riscv/Kconfig
> @@ -57,6 +57,7 @@ source "board/sifive/fu540/Kconfig"
>  # platform-specific options below
>  source "arch/riscv/cpu/ax25/Kconfig"
>  source "arch/riscv/cpu/generic/Kconfig"
> +source "arch/riscv/cpu/fu540/Kconfig"
>
>  # architecture-specific options below
>
> diff --git a/arch/riscv/cpu/fu540/Kconfig b/arch/riscv/cpu/fu540/Kconfig
> new file mode 100644
> index 0000000000..b2cb155d6d
> --- /dev/null
> +++ b/arch/riscv/cpu/fu540/Kconfig
> @@ -0,0 +1,15 @@
> +# SPDX-License-Identifier: GPL-2.0+
> +#
> +# Copyright (C) 2018, Bin Meng <bmeng.cn at gmail.com>
> +
> +config GENERIC_RISCV
> +       bool
> +       select ARCH_EARLY_INIT_R
> +       imply CPU
> +       imply CPU_RISCV
> +       imply RISCV_TIMER
> +       imply SIFIVE_CLINT if (RISCV_MMODE || SPL_RISCV_MMODE)
> +       imply CMD_CPU
> +       imply SPL_CPU_SUPPORT
> +       imply SPL_OPENSBI
> +       imply SPL_LOAD_FIT
> diff --git a/arch/riscv/cpu/fu540/Makefile b/arch/riscv/cpu/fu540/Makefile
> new file mode 100644
> index 0000000000..44700d998c
> --- /dev/null
> +++ b/arch/riscv/cpu/fu540/Makefile
> @@ -0,0 +1,7 @@
> +# SPDX-License-Identifier: GPL-2.0+
> +#
> +# Copyright (C) 2020 SiFive, Inc
> +# Pragnesh Patel <pragnesh.patel at sifive.com>
> +
> +obj-y += dram.o
> +obj-y += cpu.o
> diff --git a/arch/riscv/cpu/fu540/cpu.c b/arch/riscv/cpu/fu540/cpu.c
> new file mode 100644
> index 0000000000..13a69ef0cc
> --- /dev/null
> +++ b/arch/riscv/cpu/fu540/cpu.c
> @@ -0,0 +1,22 @@
> +// SPDX-License-Identifier: GPL-2.0+
> +/*
> + * Copyright (C) 2018, Bin Meng <bmeng.cn at gmail.com>
> + */
> +
> +#include <common.h>
> +#include <irq_func.h>
> +
> +/*
> + * cleanup_before_linux() is called just before we call linux
> + * it prepares the processor for linux
> + *
> + * we disable interrupt and caches.
> + */
> +int cleanup_before_linux(void)
> +{
> +       disable_interrupts();
> +
> +       cache_flush();
> +
> +       return 0;
> +}
> diff --git a/arch/riscv/cpu/fu540/dram.c b/arch/riscv/cpu/fu540/dram.c
> new file mode 100644
> index 0000000000..1dc77efeca
> --- /dev/null
> +++ b/arch/riscv/cpu/fu540/dram.c
> @@ -0,0 +1,38 @@
> +// SPDX-License-Identifier: GPL-2.0+
> +/*
> + * Copyright (C) 2018, Bin Meng <bmeng.cn at gmail.com>
> + */
> +
> +#include <common.h>
> +#include <fdtdec.h>
> +#include <init.h>
> +#include <linux/sizes.h>
> +
> +DECLARE_GLOBAL_DATA_PTR;
> +
> +int dram_init(void)
> +{
> +       return fdtdec_setup_mem_size_base();
> +}
> +
> +int dram_init_banksize(void)
> +{
> +       return fdtdec_setup_memory_banksize();
> +}
> +
> +ulong board_get_usable_ram_top(ulong total_size)
> +{
> +#ifdef CONFIG_64BIT
> +       /*
> +        * Ensure that we run from first 4GB so that all
> +        * addresses used by U-Boot are 32bit addresses.
> +        *
> +        * This in-turn ensures that 32bit DMA capable
> +        * devices work fine because DMA mapping APIs will
> +        * provide 32bit DMA addresses only.
> +        */
> +       if (gd->ram_top > SZ_4G)
> +               return SZ_4G;
> +#endif
> +       return gd->ram_top;

Is all this code common across SPL and U-Boot proper? except that SPL
config imply.

Jagan.