[PATCH v2 00/12] stm32mp1: several board and arch updates

[Patrick DELAUNAY]

Hi,

> From: Patrick DELAUNAY <patrick.delaunay at st.com>
> Sent: mercredi 22 avril 2020 14:29
> 
> 
> It is a V2 for the serie
> http://patchwork.ozlabs.org/project/uboot/list/?series=167872
> 
> Rebased on master branch and after the first reviews:
> 
> [01/16] arm: stm32mp: update dependency for STM32_ETZPC
>   is already accepted/merged
> 
> [03/16] arm: stm32mp: reset to default environment when serial# change [04/16]
> arm: stm32mp: detect U-Boot version used to save environment [11/16] board:
> stm32mp1: check env_get result in board_late_init
>   are dropped
> 
> [05/16] arm: stm32mp: spl: add bsec driver in SPL
>   this unrelated patch is moved in a separate serie:
>   "stm32mp1: use OPP information for PLL1 settings in SPL"
> 
> 
> Changes in v2:
> - minor commit message update
> - simplify patch after Wolfgang review, as console init alway failed when
>   drivers can't probe (remove printf after preloader_console_init call)
> - use CONFIG_IS_ENABLED(LED) everywhere
> - remove debug message and unused return of board_ev1_init
> - remove bootdelay configuration after Wolfgang's comment on dropped patch
>   [11/16] board: stm32mp1: check env_get result in board_late_init
> 
> Christophe Roullier (1):
>   configs: stm32mp1: activate Ethernet PHY Realtek
> 
> Patrice Chotard (1):
>   board: stm32mp1: Keep error led ON in case of low power detection
> 
> Patrick Delaunay (10):
>   arm: stm32mp: remove dependency for STM32KEY
>   arm: stm32mp: spl: update error management in board_init_f
>   board: stm32mp1: update management of boot-led
>   board: stm32mp1: gt9147 IRQ before reset on EV1
>   board: stm32mp1: set environment variable fdtfile
>   board: stm32mp1: remove bootdelay configuration for usb or serial boot
>   board: stm32mp1: add timeout for I/O compensation ready
>   gpio: stm32: support gpio ops in SPL
>   ARM: dts: stm32mp15: use DDR3 files generated by STM32CubeMX
>   configs: stm32mp1: activate CONFIG_ERRNO_STR
> 
>  .../dts/stm32mp15-ddr3-1x4Gb-1066-binG.dtsi   |  49 +++++----
>  .../dts/stm32mp15-ddr3-2x4Gb-1066-binG.dtsi   |  49 +++++----
>  arch/arm/dts/stm32mp157a-dk1-u-boot.dtsi      |   4 -
>  arch/arm/dts/stm32mp157c-ed1-u-boot.dtsi      |   4 -
>  arch/arm/mach-stm32mp/Kconfig                 |   2 -
>  arch/arm/mach-stm32mp/spl.c                   |   6 +-
>  board/st/stm32mp1/stm32mp1.c                  | 102 +++++++++++++-----
>  configs/stm32mp15_basic_defconfig             |   2 +
>  configs/stm32mp15_trusted_defconfig           |   2 +
>  drivers/gpio/stm32_gpio.c                     |   7 +-
>  10 files changed, 130 insertions(+), 97 deletions(-)
> 
> --
> 2.17.1

For the serie applied to u-boot-stm/master, thanks!

Regards

Patrick