[PATCH] rockchip: rockpro64: Set cooling levels for pwm-fan

[Kurt Miller]

The cooling levels are tuned to the fan that comes with the rockpro64 NAS
case. A gpu_thermal zone was not added because having two active cooling
maps control one physical fan causes them to compete for the fan speed
which results in erratic fan behavior.

Signed-off-by: Kurt Miller <kurt at intricatesoftware.com>
---

 arch/arm/dts/rk3399-rockpro64-u-boot.dtsi | 43 +++++++++++++++++++++++
 1 file changed, 43 insertions(+)

diff --git a/arch/arm/dts/rk3399-rockpro64-u-boot.dtsi b/arch/arm/dts/rk3399-rockpro64-u-boot.dtsi
index deaa3efd39..c0e0396758 100644
--- a/arch/arm/dts/rk3399-rockpro64-u-boot.dtsi
+++ b/arch/arm/dts/rk3399-rockpro64-u-boot.dtsi
@@ -13,6 +13,49 @@
 	chosen {
 		u-boot,spl-boot-order = "same-as-spl", &sdmmc, &sdhci;
 	};
+
+	fan: pwm-fan {
+		cooling-levels = <0 40 80 255>;
+	};
+};
+
+&cpu_thermal {
+	trips {
+		cpu_warm: cpu_warm {
+			temperature = <50000>;
+			hysteresis = <2000>;
+			type = "active";
+		};
+
+		cpu_med: cpu_med {
+			temperature = <60000>;
+			hysteresis = <2000>;
+			type = "active";
+		};
+
+		cpu_hot: cpu_hot {
+			temperature = <65000>;
+			hysteresis = <2000>;
+			type = "active";
+		};
+	};
+
+	cooling-maps {
+		map2 {
+			trip = <&cpu_warm>;
+			cooling-device = <&fan THERMAL_NO_LIMIT 1>;
+		};
+
+		map3 {
+			trip = <&cpu_med>;
+			cooling-device = <&fan THERMAL_NO_LIMIT 2>;
+		};
+
+		map4 {
+			trip = <&cpu_hot>;
+			cooling-device = <&fan 2 THERMAL_NO_LIMIT>;
+		};
+	};
 };
 
 &vdd_center {
-- 
2.26.2