[PATCH V2] mkimage: fit: Do not tail-pad fitImage with external data

[Marek Vasut]

On 5/5/20 7:55 PM, Tom Rini wrote:
> On Tue, May 05, 2020 at 07:53:42PM +0200, Marek Vasut wrote:
>> On 5/5/20 7:50 PM, Tom Rini wrote:
>>> On Tue, May 05, 2020 at 06:39:58PM +0200, Marek Vasut wrote:
>>>> On 5/5/20 6:37 PM, Alex Kiernan wrote:
>>>>> On Tue, May 5, 2020 at 2:28 PM Marek Vasut <marex at denx.de> wrote:
>>>>>>
>>>>>> On 5/5/20 3:22 PM, Alex Kiernan wrote:
>>>>>>> On Mon, May 4, 2020 at 12:28 PM Tom Rini <trini at konsulko.com> wrote:
>>>>>>>>
>>>>>>>> On Fri, May 01, 2020 at 05:40:25PM +0200, Marek Vasut wrote:
>>>>>>>>
>>>>>>>>> There is no reason to tail-pad fitImage with external data to 4-bytes,
>>>>>>>>> while fitImage without external data does not have any such padding and
>>>>>>>>> is often unaligned. DT spec also does not mandate any such padding.
>>>>>>>>>
>>>>>>>>> Moreover, the tail-pad fills the last few bytes with uninitialized data,
>>>>>>>>> which could lead to a potential information leak.
>>>>>>>>>
>>>>>>>>> $ echo -n xy > /tmp/data ; \
>>>>>>>>>       ./tools/mkimage -E -f auto -d /tmp/data /tmp/fitImage ; \
>>>>>>>>>       hexdump -vC /tmp/fitImage | tail -n 3
>>>>>>>>>
>>>>>>>>> before:
>>>>>>>>> 00000260  61 2d 6f 66 66 73 65 74  00 64 61 74 61 2d 73 69  |a-offset.data-si|
>>>>>>>>> 00000270  7a 65 00 00 78 79 64 64                           |ze..xydd|
>>>>>>>>>                    ^^       ^^ ^^
>>>>>>>>> after:
>>>>>>>>> 00000260  61 2d 6f 66 66 73 65 74  00 64 61 74 61 2d 73 69  |a-offset.data-si|
>>>>>>>>> 00000270  7a 65 00 78 79                                    |ze.xy|
>>>>>>>>>
>>>>>>>>> Signed-off-by: Marek Vasut <marex at denx.de>
>>>>>>>>> Reviewed-by: Simon Glass <sjg at chromium.org>
>>>>>>>>> Cc: Heinrich Schuchardt <xypron.glpk at gmx.de>
>>>>>>>>> Cc: Tom Rini <trini at konsulko.com>
>>>>>>>>
>>>>>>>> Applied to u-boot/master, thanks!
>>>>>>>>
>>>>>>>
>>>>>>> This breaks booting on my board (am3352, eMMC boot, FIT u-boot,
>>>>>>> CONFIG_SPL_LOAD_FIT). Not got any useful diagnostics - if I boot it
>>>>>>> from eMMC I get nothing at all on the console, if I boot over ymodem
>>>>>>> it stalls at 420k, before continuing to 460k. My guess is there's some
>>>>>>> error going to the console at the 420k mark, but obviously it's lost
>>>>>>> in the ymodem... I have two DTBs in the FIT image, 420k would about
>>>>>>> align to the point between them.
>>>>>>
>>>>>> My bet would be on some padding / unaligned access problem that this
>>>>>> patch uncovered. Can you take a look ?
>>>>>
>>>>> Seems plausible. With this change my external data starts at 0x483 and
>>>>> everything after it is non-aligned:
>>>>
>>>> Should the beginning of external data be aligned ?
>>>
>>> If in U-Boot we revert e8c2d25845c72c7202a628a97d45e31beea40668 does the
>>> problem go away?  If so, that's not a fix outright, it means we need to
>>> dig back in to the libfdt thread and find the "make this work without
>>> killing performance everywhere all the time" option.
>>
>> Still, my question is, should the beginning of external data be aligned
>> ? And if so, to what, 4 bytes like FDT entries OR 8 bytes to cater for
>> arm64/rv64 ?
> 
> Is "external data" the kernel in this case?  If so, I swear Linux
> mandates 8 byte alignment for arm32 as well.

External data can be anything, and if it is supposed to be 8 bytes, we
already failed at that since forever.