[PATCH 02/13] thermal: Add thermal driver for i.MX8M
Peng Fan
peng.fan at nxp.com
Sun May 3 16:19:46 CEST 2020
The driver is ported form Linux Kernel and support driver model.
Users need to provide the tmu node and sensors nodes in DTB.
Signed-off-by: Ye Li <ye.li at nxp.com>
Signed-off-by: Peng Fan <peng.fan at nxp.com>
---
drivers/thermal/Kconfig | 9 ++
drivers/thermal/Makefile | 1 +
drivers/thermal/imx_tmu.c | 325 ++++++++++++++++++++++++++++++++++++++++++++++
3 files changed, 335 insertions(+)
create mode 100644 drivers/thermal/imx_tmu.c
diff --git a/drivers/thermal/Kconfig b/drivers/thermal/Kconfig
index bdf8dc6fef..97d4163e8e 100644
--- a/drivers/thermal/Kconfig
+++ b/drivers/thermal/Kconfig
@@ -26,6 +26,15 @@ config IMX_SCU_THERMAL
boot is hold to the cool device to throttle CPUs when the passive
trip is crossed
+config IMX_TMU
+ bool "Thermal Management Unit driver for NXP i.MX8M"
+ depends on ARCH_IMX8M
+ help
+ Support for Temperature sensors on NXP i.MX8M.
+ It supports one critical trip point and one passive trip point.
+ The boot is hold to the cool device to throttle CPUs when the
+ passive trip is crossed
+
config TI_DRA7_THERMAL
bool "Temperature sensor driver for TI dra7xx SOCs"
help
diff --git a/drivers/thermal/Makefile b/drivers/thermal/Makefile
index ef2929d180..15fe847d9f 100644
--- a/drivers/thermal/Makefile
+++ b/drivers/thermal/Makefile
@@ -7,3 +7,4 @@ obj-$(CONFIG_DM_THERMAL) += thermal-uclass.o
obj-$(CONFIG_IMX_THERMAL) += imx_thermal.o
obj-$(CONFIG_IMX_SCU_THERMAL) += imx_scu_thermal.o
obj-$(CONFIG_TI_DRA7_THERMAL) += ti-bandgap.o
+obj-$(CONFIG_IMX_TMU) += imx_tmu.o
diff --git a/drivers/thermal/imx_tmu.c b/drivers/thermal/imx_tmu.c
new file mode 100644
index 0000000000..f496ce03b6
--- /dev/null
+++ b/drivers/thermal/imx_tmu.c
@@ -0,0 +1,325 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * Copyright 2017~2020 NXP
+ *
+ */
+
+#include <config.h>
+#include <common.h>
+#include <asm/io.h>
+#include <asm/arch/clock.h>
+#include <asm/arch/sys_proto.h>
+#include <dm.h>
+#include <dm/device-internal.h>
+#include <dm/device.h>
+#include <errno.h>
+#include <fuse.h>
+#include <malloc.h>
+#include <thermal.h>
+
+DECLARE_GLOBAL_DATA_PTR;
+
+#define SITES_MAX 16
+
+#define TMR_DISABLE 0x0
+#define TMR_ME 0x80000000
+#define TMR_ALPF 0x0c000000
+#define TMTMIR_DEFAULT 0x00000002
+#define TIER_DISABLE 0x0
+
+/*
+ * i.MX TMU Registers
+ */
+struct imx_tmu_site_regs {
+ u32 tritsr; /* Immediate Temperature Site Register */
+ u32 tratsr; /* Average Temperature Site Register */
+ u8 res0[0x8];
+};
+
+struct imx_tmu_regs {
+ u32 tmr; /* Mode Register */
+ u32 tsr; /* Status Register */
+ u32 tmtmir; /* Temperature measurement interval Register */
+ u8 res0[0x14];
+ u32 tier; /* Interrupt Enable Register */
+ u32 tidr; /* Interrupt Detect Register */
+ u32 tiscr; /* Interrupt Site Capture Register */
+ u32 ticscr; /* Interrupt Critical Site Capture Register */
+ u8 res1[0x10];
+ u32 tmhtcrh; /* High Temperature Capture Register */
+ u32 tmhtcrl; /* Low Temperature Capture Register */
+ u8 res2[0x8];
+ u32 tmhtitr; /* High Temperature Immediate Threshold */
+ u32 tmhtatr; /* High Temperature Average Threshold */
+ u32 tmhtactr; /* High Temperature Average Crit Threshold */
+ u8 res3[0x24];
+ u32 ttcfgr; /* Temperature Configuration Register */
+ u32 tscfgr; /* Sensor Configuration Register */
+ u8 res4[0x78];
+ struct imx_tmu_site_regs site[SITES_MAX];
+ u8 res5[0x9f8];
+ u32 ipbrr0; /* IP Block Revision Register 0 */
+ u32 ipbrr1; /* IP Block Revision Register 1 */
+ u8 res6[0x310];
+ u32 ttr0cr; /* Temperature Range 0 Control Register */
+ u32 ttr1cr; /* Temperature Range 1 Control Register */
+ u32 ttr2cr; /* Temperature Range 2 Control Register */
+ u32 ttr3cr; /* Temperature Range 3 Control Register */
+};
+
+struct imx_tmu_plat {
+ int critical;
+ int alert;
+ int polling_delay;
+ int id;
+ bool zone_node;
+ struct imx_tmu_regs *regs;
+};
+
+static int read_temperature(struct udevice *dev, int *temp)
+{
+ struct imx_tmu_plat *pdata = dev_get_platdata(dev);
+ u32 val;
+
+ do {
+ val = readl(&pdata->regs->site[pdata->id].tritsr);
+ } while (!(val & 0x80000000));
+
+ *temp = (val & 0xff) * 1000;
+
+ return 0;
+}
+
+int imx_tmu_get_temp(struct udevice *dev, int *temp)
+{
+ struct imx_tmu_plat *pdata = dev_get_platdata(dev);
+ int cpu_tmp = 0;
+ int ret;
+
+ ret = read_temperature(dev, &cpu_tmp);
+ if (ret)
+ return ret;
+
+ while (cpu_tmp >= pdata->alert) {
+ printf("CPU Temperature (%dC) has beyond alert (%dC), close to critical (%dC)", cpu_tmp, pdata->alert, pdata->critical);
+ puts(" waiting...\n");
+ mdelay(pdata->polling_delay);
+ ret = read_temperature(dev, &cpu_tmp);
+ if (ret)
+ return ret;
+ }
+
+ *temp = cpu_tmp / 1000;
+
+ return 0;
+}
+
+static const struct dm_thermal_ops imx_tmu_ops = {
+ .get_temp = imx_tmu_get_temp,
+};
+
+static int imx_tmu_calibration(struct udevice *dev)
+{
+ int i, val, len, ret;
+ u32 range[4];
+ const fdt32_t *calibration;
+ struct imx_tmu_plat *pdata = dev_get_platdata(dev);
+
+ debug("%s\n", __func__);
+
+ ret = dev_read_u32_array(dev, "fsl,tmu-range", range, 4);
+ if (ret) {
+ printf("TMU: missing calibration range, ret = %d.\n", ret);
+ return ret;
+ }
+
+ /* Init temperature range registers */
+ writel(range[0], &pdata->regs->ttr0cr);
+ writel(range[1], &pdata->regs->ttr1cr);
+ writel(range[2], &pdata->regs->ttr2cr);
+ writel(range[3], &pdata->regs->ttr3cr);
+
+ calibration = dev_read_prop(dev, "fsl,tmu-calibration", &len);
+ if (!calibration || len % 8) {
+ printf("TMU: invalid calibration data.\n");
+ return -ENODEV;
+ }
+
+ for (i = 0; i < len; i += 8, calibration += 2) {
+ val = fdt32_to_cpu(*calibration);
+ writel(val, &pdata->regs->ttcfgr);
+ val = fdt32_to_cpu(*(calibration + 1));
+ writel(val, &pdata->regs->tscfgr);
+ }
+
+ return 0;
+}
+
+static void imx_tmu_init(struct imx_tmu_plat *pdata)
+{
+ debug("%s\n", __func__);
+
+ /* Disable monitoring */
+ writel(TMR_DISABLE, &pdata->regs->tmr);
+
+ /* Disable interrupt, using polling instead */
+ writel(TIER_DISABLE, &pdata->regs->tier);
+
+ /* Set update_interval */
+ writel(TMTMIR_DEFAULT, &pdata->regs->tmtmir);
+}
+
+static int imx_tmu_enable_msite(struct udevice *dev)
+{
+ struct imx_tmu_plat *pdata = dev_get_platdata(dev);
+ u32 reg;
+
+ debug("%s\n", __func__);
+
+ if (!pdata->regs)
+ return -EIO;
+
+ /* Clear the ME before setting MSITE and ALPF*/
+ reg = readl(&pdata->regs->tmr);
+ reg &= ~TMR_ME;
+ writel(reg, &pdata->regs->tmr);
+
+ reg |= 1 << (15 - pdata->id);
+ reg |= TMR_ALPF;
+ writel(reg, &pdata->regs->tmr);
+
+ /* Enable ME */
+ reg |= TMR_ME;
+ writel(reg, &pdata->regs->tmr);
+
+ return 0;
+}
+
+static int imx_tmu_bind(struct udevice *dev)
+{
+ struct imx_tmu_plat *pdata = dev_get_platdata(dev);
+ int ret;
+ ofnode node, offset;
+ const char *name;
+ const void *prop;
+
+ debug("%s dev name %s\n", __func__, dev->name);
+
+ prop = dev_read_prop(dev, "compatible", NULL);
+ if (!prop)
+ return 0;
+
+ pdata->zone_node = 1;
+
+ node = ofnode_path("/thermal-zones");
+ ofnode_for_each_subnode(offset, node) {
+ /* Bind the subnode to this driver */
+ name = ofnode_get_name(offset);
+
+ ret = device_bind_with_driver_data(dev, dev->driver, name,
+ dev->driver_data, offset,
+ NULL);
+ if (ret)
+ printf("Error binding driver '%s': %d\n",
+ dev->driver->name, ret);
+ }
+
+ return 0;
+}
+
+static int imx_tmu_parse_fdt(struct udevice *dev)
+{
+ struct imx_tmu_plat *pdata = dev_get_platdata(dev), *p_parent_data;
+ struct ofnode_phandle_args args;
+ ofnode trips_np;
+ int ret;
+
+ debug("%s dev name %s\n", __func__, dev->name);
+
+ if (pdata->zone_node) {
+ pdata->regs = (struct imx_tmu_regs *)dev_read_addr_ptr(dev);
+
+ if (!pdata->regs)
+ return -EINVAL;
+ return 0;
+ }
+
+ p_parent_data = dev_get_platdata(dev->parent);
+ if (p_parent_data->zone_node)
+ pdata->regs = p_parent_data->regs;
+
+ ret = dev_read_phandle_with_args(dev, "thermal-sensors",
+ "#thermal-sensor-cells",
+ 0, 0, &args);
+ if (ret)
+ return ret;
+
+ if (!ofnode_equal(args.node, dev_ofnode(dev->parent)))
+ return -EFAULT;
+
+ if (args.args_count >= 1)
+ pdata->id = args.args[0];
+ else
+ pdata->id = 0;
+
+ debug("args.args_count %d, id %d\n", args.args_count, pdata->id);
+
+ pdata->polling_delay = dev_read_u32_default(dev, "polling-delay", 1000);
+
+ trips_np = ofnode_path("/thermal-zones/cpu-thermal/trips");
+ ofnode_for_each_subnode(trips_np, trips_np) {
+ const char *type;
+
+ type = ofnode_get_property(trips_np, "type", NULL);
+ if (!type)
+ continue;
+ if (!strcmp(type, "critical"))
+ pdata->critical = ofnode_read_u32_default(trips_np, "temperature", 85);
+ else if (strcmp(type, "passive") == 0)
+ pdata->alert = ofnode_read_u32_default(trips_np, "temperature", 80);
+ else
+ continue;
+ }
+
+ debug("id %d polling_delay %d, critical %d, alert %d\n",
+ pdata->id, pdata->polling_delay, pdata->critical, pdata->alert);
+
+ return 0;
+}
+
+static int imx_tmu_probe(struct udevice *dev)
+{
+ struct imx_tmu_plat *pdata = dev_get_platdata(dev);
+ int ret;
+
+ ret = imx_tmu_parse_fdt(dev);
+ if (ret) {
+ printf("Error in parsing TMU FDT %d\n", ret);
+ return ret;
+ }
+
+ if (pdata->zone_node) {
+ imx_tmu_init(pdata);
+ imx_tmu_calibration(dev);
+ } else {
+ imx_tmu_enable_msite(dev);
+ }
+
+ return 0;
+}
+
+static const struct udevice_id imx_tmu_ids[] = {
+ { .compatible = "fsl,imx8mq-tmu", },
+ { }
+};
+
+U_BOOT_DRIVER(imx_tmu) = {
+ .name = "imx_tmu",
+ .id = UCLASS_THERMAL,
+ .ops = &imx_tmu_ops,
+ .of_match = imx_tmu_ids,
+ .bind = imx_tmu_bind,
+ .probe = imx_tmu_probe,
+ .platdata_auto_alloc_size = sizeof(struct imx_tmu_plat),
+ .flags = DM_FLAG_PRE_RELOC,
+};
--
2.16.4
More information about the U-Boot
mailing list