[PATCH 31/36] bdinfo: ppc: Move PPC-specific info into its own file

[Simon Glass]

We don't really want to have PPC-specific code in a generic file. Create
a new arch-specific function to hold it, and move it into that.

Make the function weak so that any arch can implement it.

Signed-off-by: Simon Glass <sjg at chromium.org>
---

 arch/powerpc/lib/Makefile |  2 ++
 arch/powerpc/lib/bdinfo.c | 41 +++++++++++++++++++++++++++++++++++++++
 cmd/bdinfo.c              | 27 --------------------------
 3 files changed, 43 insertions(+), 27 deletions(-)
 create mode 100644 arch/powerpc/lib/bdinfo.c

diff --git a/arch/powerpc/lib/Makefile b/arch/powerpc/lib/Makefile
index 01c9dd51be..f61809ab05 100644
--- a/arch/powerpc/lib/Makefile
+++ b/arch/powerpc/lib/Makefile
@@ -15,6 +15,8 @@ MINIMAL=y
 endif
 endif
 
+obj-y	+= bdinfo.o
+
 ifdef MINIMAL
 obj-y += cache.o time.o
 ifndef CONFIG_TIMER
diff --git a/arch/powerpc/lib/bdinfo.c b/arch/powerpc/lib/bdinfo.c
new file mode 100644
index 0000000000..da09bb276f
--- /dev/null
+++ b/arch/powerpc/lib/bdinfo.c
@@ -0,0 +1,41 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * PPC-specific information for the 'bd' command
+ *
+ * (C) Copyright 2003
+ * Wolfgang Denk, DENX Software Engineering, wd at denx.de.
+ */
+
+#include <common.h>
+#include <init.h>
+
+DECLARE_GLOBAL_DATA_PTR;
+
+void __weak board_detail(void)
+{
+	/* Please define board_detail() for your PPC platform */
+}
+
+void arch_print_bdinfo(void)
+{
+	bd_t *bd = gd->bd;
+
+#if defined(CONFIG_MPC8xx) || defined(CONFIG_E500)
+	bdinfo_print_num("immr_base", bd->bi_immr_base);
+#endif
+	bdinfo_print_num("bootflags", bd->bi_bootflags);
+	bdinfo_print_mhz("intfreq", bd->bi_intfreq);
+#ifdef CONFIG_ENABLE_36BIT_PHYS
+	if (IS_ENABLED(CONFIG_PHYS_64BIT))
+		puts("addressing  = 36-bit\n");
+	else
+		puts("addressing  = 32-bit\n");
+#endif
+	board_detail();
+#if defined(CONFIG_CPM2)
+	bdinfo_print_mhz("cpmfreq", bd->bi_cpmfreq);
+	bdinfo_print_mhz("vco", bd->bi_vco);
+	bdinfo_print_mhz("sccfreq", bd->bi_sccfreq);
+	bdinfo_print_mhz("brgfreq", bd->bi_brgfreq);
+#endif
+}
diff --git a/cmd/bdinfo.c b/cmd/bdinfo.c
index 55a9244aef..570022052c 100644
--- a/cmd/bdinfo.c
+++ b/cmd/bdinfo.c
@@ -60,11 +60,6 @@ static void print_bi_dram(const bd_t *bd)
 #endif
 }
 
-void __weak board_detail(void)
-{
-	/* Please define board_detail() for your PPC platform */
-}
-
 __weak void arch_print_bdinfo(void)
 {
 }
@@ -103,28 +98,6 @@ int do_bdinfo(cmd_tbl_t *cmdtp, int flag, int argc, char *const argv[])
 
 	arch_print_bdinfo();
 
-	/* This section is used only by ppc */
-#if defined(CONFIG_MPC8xx) || defined(CONFIG_E500)
-	bdinfo_print_num("immr_base", bd->bi_immr_base);
-#endif
-	if (IS_ENABLED(CONFIG_PPC)) {
-		bdinfo_print_num("bootflags", bd->bi_bootflags);
-		bdinfo_print_mhz("intfreq", bd->bi_intfreq);
-#ifdef CONFIG_ENABLE_36BIT_PHYS
-		if (IS_ENABLED(CONFIG_PHYS_64BIT))
-			puts("addressing  = 36-bit\n");
-		else
-			puts("addressing  = 32-bit\n");
-#endif
-		board_detail();
-	}
-#if defined(CONFIG_CPM2)
-	bdinfo_print_mhz("cpmfreq", bd->bi_cpmfreq);
-	bdinfo_print_mhz("vco", bd->bi_vco);
-	bdinfo_print_mhz("sccfreq", bd->bi_sccfreq);
-	bdinfo_print_mhz("brgfreq", bd->bi_brgfreq);
-#endif
-
 	/* This is used by m68k and ppc */
 #if defined(CONFIG_SYS_INIT_RAM_ADDR)
 	bdinfo_print_num("sramstart", (ulong)bd->bi_sramstart);
-- 
2.26.2.526.g744177e7f7-goog