[PATCH v8 18/21] configs: fu540: Add config options for U-Boot SPL
Pragnesh Patel
pragnesh.patel at sifive.com
Sat May 9 16:30:33 CEST 2020
With sifive_fu540_defconfig:
User can use FSBL or u-boot-spl.bin anyone at a time.
For FSBL,
fsbl->fw_payload.bin (opensbi + U-Boot)
For u-boot-spl.bin,
u-boot-spl.bin->FIT image (opensbi + U-Boot + dtb)
U-Boot SPL will be loaded by ZSBL from SD card (replace fsbl.bin with
u-boot-spl.bin) and runs in L2 LIM in machine mode and then load FIT
image u-boot.itb from SD card into RAM.
U-Boot SPL expects u-boot.itb FIT image at the starting of SD card sector
number (0x822) of GUID type "2E54B353-1271-4842-806F-E436D6AF6985"
Signed-off-by: Pragnesh Patel <pragnesh.patel at sifive.com>
Signed-off-by: Jagan Teki <jagan at amarulasolutions.com>
---
configs/sifive_fu540_defconfig | 8 ++
doc/board/sifive/fu540.rst | 134 +++++++++++++++++++++++++++++++++
2 files changed, 142 insertions(+)
diff --git a/configs/sifive_fu540_defconfig b/configs/sifive_fu540_defconfig
index f805aacc7a..8d412f8d6a 100644
--- a/configs/sifive_fu540_defconfig
+++ b/configs/sifive_fu540_defconfig
@@ -1,6 +1,11 @@
CONFIG_RISCV=y
+CONFIG_SPL_GPIO_SUPPORT=y
+CONFIG_SYS_MALLOC_F_LEN=0x3000
CONFIG_ENV_SIZE=0x20000
+CONFIG_SPL_MMC_SUPPORT=y
CONFIG_NR_DRAM_BANKS=1
+CONFIG_SPL=y
+CONFIG_SPL_SPI_SUPPORT=y
CONFIG_TARGET_SIFIVE_FU540=y
CONFIG_ARCH_RV64I=y
CONFIG_RISCV_SMODE=y
@@ -9,7 +14,10 @@ CONFIG_FIT=y
CONFIG_MISC_INIT_R=y
CONFIG_DISPLAY_CPUINFO=y
CONFIG_DISPLAY_BOARDINFO=y
+CONFIG_SPL_SEPARATE_BSS=y
+CONFIG_SPL_YMODEM_SUPPORT=y
CONFIG_OF_BOARD_FIXUP=y
CONFIG_DEFAULT_DEVICE_TREE="hifive-unleashed-a00"
CONFIG_SYS_RELOC_GD_ENV_ADDR=y
+CONFIG_SPL_CLK=y
CONFIG_DM_MTD=y
diff --git a/doc/board/sifive/fu540.rst b/doc/board/sifive/fu540.rst
index 610ba87074..89e8d66c56 100644
--- a/doc/board/sifive/fu540.rst
+++ b/doc/board/sifive/fu540.rst
@@ -31,6 +31,9 @@ TODO:
stdout-path = "/soc/serial at 10010000:115200";
};
+Booting from MMC using FSBL
+---------------------------
+
Building
--------
@@ -421,3 +424,134 @@ as well.
Please press Enter to activate this console.
/ #
+
+Booting from MMC using U-Boot SPL
+---------------------------------
+
+Building
+--------
+
+Before building U-Boot SPL, OpenSBI must be built first. OpenSBI can be
+cloned and built for FU540 as below:
+
+.. code-block:: console
+
+ git clone https://github.com/riscv/opensbi.git
+ cd opensbi
+ make PLATFORM=generic FW_DYNAMIC=y
+
+Copy OpenSBI FW_DYNAMIC image
+(build/platform/generic/firmware/fw_dynamic.bin) into U-Boot
+root directory
+
+.. code-block:: console
+
+ cp build/platform/generic/firmware/fw_dynamic.bin <u-boot-dir>
+
+Now build the U-Boot SPL and U-Boot proper
+
+.. code-block:: console
+
+ cd <U-Boot-dir>
+ make sifive_fu540_defconfig
+ make
+
+This will generate spl/u-boot-spl.bin and FIT image (u-boot.itb)
+
+
+Flashing
+--------
+
+ZSBL loads the U-Boot SPL (u-boot-spl.bin) from a partition with GUID type
+5B193300-FC78-40CD-8002-E86C45580B47
+
+U-Boot SPL expects a U-Boot FIT image (u-boot.itb) from a partition with GUID
+type 2E54B353-1271-4842-806F-E436D6AF6985
+
+FIT image (u-boot.itb) is a combination of fw_dynamic.bin, u-boot-nodtb.bin and
+device tree blob (hifive-unleashed-a00.dtb)
+
+Format the SD card (make sure the disk has GPT, otherwise use gdisk to switch)
+
+.. code-block:: none
+
+ # sudo sgdisk --clear \
+ > --set-alignment=2 \
+ > --new=1:34:2081 --change-name=1:loader1 --typecode=1:5B193300-FC78-40CD-8002-E86C45580B47 \
+ > --new=2:2082:10273 --change-name=2:loader2 --typecode=2:2E54B353-1271-4842-806F-E436D6AF6985 \
+ > --new=3:10274: --change-name=3:rootfs --typecode=3:0FC63DAF-8483-4772-8E79-3D69D8477DE4 \
+ > /dev/sda
+
+Program the SD card
+
+.. code-block:: none
+
+ sudo dd if=spl/u-boot-spl.bin of=/dev/sda seek=34
+ sudo dd if=u-boot.itb of=/dev/sda seek=2082
+
+Booting
+-------
+Once you plugin the sdcard and power up, you should see the U-Boot prompt.
+
+Sample boot log from HiFive Unleashed board
+-------------------------------------------
+
+.. code-block:: none
+
+ U-Boot SPL 2020.04-rc2-00109-g63efc7e07e-dirty (Apr 30 2020 - 13:52:36 +0530)
+ Trying to boot from MMC1
+
+
+ U-Boot 2020.04-rc2-00109-g63efc7e07e-dirty (Apr 30 2020 - 13:52:36 +0530)
+
+ CPU: rv64imafdc
+ Model: SiFive HiFive Unleashed A00
+ DRAM: 8 GiB
+ MMC: spi at 10050000:mmc at 0: 0
+ In: serial at 10010000
+ Out: serial at 10010000
+ Err: serial at 10010000
+ Board serial number should not be 0 !!
+ Net:
+ Warning: ethernet at 10090000 (eth0) using random MAC address - 96:06:92:18:eb:04
+ eth0: ethernet at 10090000
+ Hit any key to stop autoboot: 0
+ => version
+ U-Boot 2020.04-rc2-00109-g63efc7e07e-dirty (Apr 30 2020 - 13:52:36 +0530)
+
+ riscv64-unknown-linux-gnu-gcc (crosstool-NG 1.24.0.37-3f461da) 9.2.0
+ GNU ld (crosstool-NG 1.24.0.37-3f461da) 2.32
+ => mmc info
+ Device: spi at 10050000:mmc at 0
+ Manufacturer ID: 3
+ OEM: 5344
+ Name: SC16G
+ Bus Speed: 20000000
+ Mode: SD Legacy
+ Rd Block Len: 512
+ SD version 2.0
+ High Capacity: Yes
+ Capacity: 14.8 GiB
+ Bus Width: 1-bit
+ Erase Group Size: 512 Bytes
+ => mmc part
+
+ Partition Map for MMC device 0 -- Partition Type: EFI
+
+ Part Start LBA End LBA Name
+ Attributes
+ Type GUID
+ Partition GUID
+ 1 0x00000022 0x00000821 "loader1"
+ attrs: 0x0000000000000000
+ type: 5b193300-fc78-40cd-8002-e86c45580b47
+ guid: 66e2b5d2-74db-4df8-ad6f-694b3617f87f
+ 2 0x00000822 0x00002821 "loader2"
+ attrs: 0x0000000000000000
+ type: 2e54b353-1271-4842-806f-e436d6af6985
+ guid: 8befaeaf-bca0-435d-b002-e201f37c0a2f
+ 3 0x00002822 0x01dacbde "rootfs"
+ attrs: 0x0000000000000000
+ type: 0fc63daf-8483-4772-8e79-3d69d8477de4
+ type: linux
+ guid: 9faa81b6-39b1-4418-af5e-89c48f29c20d
--
2.17.1
More information about the U-Boot
mailing list