[PATCH v2 09/10] pci: Add driver for Broadcom STB PCIe controller
Nicolas Saenz Julienne
nsaenzjulienne at suse.de
Tue May 5 17:45:41 CEST 2020
On Mon, 2020-05-04 at 14:45 +0200, Sylwester Nawrocki wrote:
> This patch adds basic driver for the Broadcom STB PCIe host controller.
> The code is based on Linux upstream driver (pcie-brcmstb.c) with MSI
> handling removed. The inbound access memory region is not currently
> parsed from dma-ranges DT property and a fixed 4GB region is used.
> The patch has been tested on RPI4 board, i.e. on BCM2711 SoC with VL805
> USB Host Controller.
> Signed-off-by: Nicolas Saenz Julienne <nsaenzjulienne at suse.de>
> Signed-off-by: Sylwester Nawrocki <s.nawrocki at samsung.com>
If it's OK with you, as I'm already familiar with the driver from maintaining
it on the Linux kernel, I wouldn't mind doing it here too.
Sylwester, if you're also interested I can send a patch adding both of us.
-------------- next part --------------
A non-text attachment was scrubbed...
Size: 488 bytes
Desc: This is a digitally signed message part
More information about the U-Boot